XYLO-TRAPOBJECTS-MIB
42 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.15.2.10.1 | ScalaranxTrapHostMax | read-only | mandatory | The maximum number of rows in the trap host table. |
| 1.3.6.1.4.1.15.2.10.2 | ScalaranxTrapHostCurEnt | read-only | mandatory | The current number of rows in the trap host table. |
| 1.3.6.1.4.1.15.2.10.3 | ScalaranxTrapHostNext | read-only | mandatory | The index of the next available row to be created in the trap host table. A value of zero means that the table is full and no more rows can be added. |
| 1.3.6.1.4.1.15.2.10.4 | TableanxTrapHostTable | not-accessible | mandatory | A table of managers which to send traps. |
| 1.3.6.1.4.1.15.2.10.4.1 | RowanxTrapHostEntry | not-accessible | mandatory | A row in the trap host table. The column anxTrapHostStatus is used to create and delete rows in the table. Creation requires a SET PDU with objects anxTrapHost… |
| 1.3.6.1.4.1.15.2.10.4.1.1 | ColumnanxTrapHostIndex | read-only | mandatory | The index of the row in the table. |
| 1.3.6.1.4.1.15.2.10.4.1.2 | ColumnanxTrapHostStatus | read-write | mandatory | This object is used to create and delete rows in the table and control if they are used. The values that can be written are: valid(2)....if the current status … |
| 1.3.6.1.4.1.15.2.10.4.1.3 | ColumnanxTrapHostAddrType | read-write | mandatory | The type of address that is stored in the object anxTrapHostNetAddr. The value is: ip(1)...IP address |
| 1.3.6.1.4.1.15.2.10.4.1.4 | ColumnanxTrapHostNetAddr | read-write | mandatory | The network address (in network order) for SNMP manager that is to receive the trap. |
| 1.3.6.1.4.1.15.2.10.4.1.5 | ColumnanxTrapHostComm | read-write | mandatory | The community string to use when sending a trap to this host. |
| 1.3.6.1.4.1.15.2.10.4.1.6 | ColumnanxTrapHostAgeTime | read-write | mandatory | The time interval in seconds used to age entries out of the trap receiver table. The default value if not specified will be 0, or infinite,never to be aged out. |
| 1.3.6.1.4.1.15.2.10.4.1.7 | ColumnanxTrapHostPortNumber | read-write | mandatory | The port number to send the trap to. If this is not enetered the port will default to 162 |
| 1.3.6.1.4.1.15.2.10.4.1.8 | ColumnanxTrapHostGrouping | read-write | mandatory | A bitmask that will associate the trp host entry with one or more trap groupings: none 0x00000000 startup 0x00000001 connection 0x00000002 wan 0x00000004 call-… |
| 1.3.6.1.4.1.15.2.10.5 | ScalaranxTrapUserName | read-only | mandatory | A string defining the user name under attack. |
| 1.3.6.1.4.1.15.2.10.6 | ScalaranxTrapPortIndex | read-only | mandatory | A unique number from 1 to totalPorts that identifies the port under attack. |
| 1.3.6.1.4.1.15.2.10.7 | ScalaranxTrapPortType | read-only | mandatory | A enumerated string that identifies the port type under attack. |
| 1.3.6.1.4.1.15.2.10.8 | ScalaranxTrapInetAddr | read-only | mandatory | The Internet address of the Annex. |
| 1.3.6.1.4.1.15.2.10.9 | ScalaranxTrapAttackErrcode | read-only | mandatory | Error code indicating the threshold reached under following circumstances. maxThreshold(1) - User has exceeded the threshold for consecutive number of attempts… |
| 1.3.6.1.4.1.15.2.10.10 | ScalaranxTrapAttackErrmsg | read-only | mandatory | Error message string. |
| 1.3.6.1.4.1.15.2.10.11 | ScalaranxTrapDbErrcode | read-only | mandatory | Error code indicating the type of error occured when ERPCD tried to access the database. read-error(1) - ERPCD cannot read the database write-error(2) - ERPCD … |
| 1.3.6.1.4.1.15.2.10.12 | ScalaranxTrapDbErrmsg | read-only | mandatory | Error message string giving details about the error when ERPCD tried to access the database. |
| 1.3.6.1.4.1.15.2.10.13 | ScalartrapModemMsg | read-only | mandatory | This object is send along with the modem busy out trap. This object specifies the modem which is being busied out and the reason for busying out the modem. |
| 1.3.6.1.4.1.15.2.10.14 | ScalaroperImageModemImage | read-only | mandatory | This is a trap indicating the operational image version and the modem image version. |
| 1.3.6.1.4.1.15.2.10.15 | ScalarwanVersion | read-only | mandatory | This trap indicates that a wan has come up and also the version string for that wan. |
| 1.3.6.1.4.1.15.2.10.18 | ScalartrapAfdMsg | read-only | mandatory | This object is sent along with the afd catastrophic trap. This object specifies the wan module which is inoperable |
| 1.3.6.1.4.1.15.100.1.1.1 | ScalarwanBpvThreshold | read-write | mandatory | The threshold which, when met or exceeded, triggers the wanBpvThreshTrap to be sent. Setting this object to zero (0) disables the trap. This object corresponds… |
| 1.3.6.1.4.1.15.100.1.1.2 | ScalarwanOofThreshold | read-write | mandatory | The threshold which, when met of exceeded, triggers the wanOofThreshTrap to be sent. Setting this object to zero (0) disables the trap. This object corresponds… |
| 1.3.6.1.4.1.15.100.1.1.3 | ScalarwanEsThreshold | read-write | mandatory | The threshold which, when met or exceeded, triggers the wanEsThreshTrap to be sent. Setting this object to zero (0) disables the trap. This object corresponds … |
| 1.3.6.1.4.1.15.100.1.1.4 | ScalarwanCvThreshold | read-write | mandatory | The threshold which, when met or exceeded, triggers the wanCvThreshtrap to be sent. Setting this object to zero (0) disables the trap. This object corresponds … |
| 1.3.6.1.4.1.15.100.1.1.5 | ScalarwanEsfThreshold | read-write | mandatory | The threshold which, when met or exceeded, triggers the wanEsfThreshTrap to be sent. Setting this object to zero (0) disables the trap. This object corresponds… |
| 1.3.6.1.4.1.15.100.1.1.6 | ScalarwanSesThreshold | read-write | mandatory | The threshold which, when met or exceeded, triggers the wanSesThreshTrap to be sent. Setting this object to zero (0) disables the trap. This object corresponds… |
| 1.3.6.1.4.1.15.100.1.1.7 | ScalarwanUasThreshold | read-write | mandatory | The threshold which, when met or exceeded, triggers the wanUasThreshTrap to be sent. Setting this object to zero (0) disables the trap. This object corresponds… |
| 1.3.6.1.4.1.15.100.1.1.8 | ScalarwanBesThreshold | read-write | mandatory | The threshold which, when met or exceeded, triggers the wanBesThreshTrap to be sent. Setting this object to zero (0) disables the trap. This object corresponds… |
| 1.3.6.1.4.1.15.100.1.1.9 | ScalarwanLofcThreshold | read-write | mandatory | The threshold which, when met or exceeded, triggers the wanLofcThreshTrap to be sent. Setting this object to zero (0) disables the trap. This object correspond… |
| 1.3.6.1.4.1.15.100.1.1.10 | ScalarwanCssThreshold | read-write | mandatory | The threshold which, when met or exceeded, triggers the wanCssThreshTrap to be sent. Setting this object to zero (0) disables the trap. This object corresponds… |
| 1.3.6.1.4.1.15.100.1.1.11 | Scalards0ErrorThreshold | read-write | mandatory | This object defines the threshold for the number of consecutive calls that the ds0 fails to accept after which the ds0ErrorTrap is sent to the trap host(s). Se… |
| 1.3.6.1.4.1.15.100.1.2.1 | ScalarmdmErrorTrapThresh | read-write | mandatory | This object defines the threshold for number of consecutive calls that the modem fails to accept after which the modem is busied out and wanMdmErrorThreshTrap … |
| 1.3.6.1.4.1.15.100.1.3.1 | ScalarcallBeginTrapObj | read-write | mandatory | This object controls the callBeginTrap trap generation by the RAC. Setting this object to disable, the RAC will not generate the callBeginTrap trap. Default is… |
| 1.3.6.1.4.1.15.100.1.3.2 | ScalarcallEndTrapThresh | read-write | mandatory | This object controls the callEndTrap trap generation by the RAC. Setting this object to zero (default) will disable the trap generation. Setting this object to… |
| 1.3.6.1.4.1.15.100.1.3.3 | ScalarunexpectDisconnectTrapThresh | read-write | mandatory | This object controls the unexpectDisconnectTrap trap generation by the RAC. Setting this object to zero (default) will disable the trap generation. Setting thi… |
| 1.3.6.1.4.1.15.100.1.3.4 | ScalarforcedCallDisconnectTrapThresh | read-write | mandatory | This object controls the forcedCallDisconnectTrap trap generation by the RAC. Setting this object to zero (default) will disable the trap generation. Setting t… |
| 1.3.6.1.4.1.15.100.1.4.1 | ScalardiallnkTrpEna | read-write | mandatory | When enabled, SNMP link up/down traps are generated for remote dialin interfaces. |