XYPLEX-IEEE-HUB-MIB
66 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter enterprises NetworkAddress TimeTicks |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.33 | Nodexyplex | |||
| 1.3.6.1.4.1.33.10001 | NodeieeeHub | |||
| 1.3.6.1.4.1.33.10001.1 | NodehmBasicCapability | |||
| 1.3.6.1.4.1.33.10001.1.1 | NodehmBasicHubTable | |||
| 1.3.6.1.4.1.33.10001.1.1.1 | NodehmBasicHubEntry | |||
| 1.3.6.1.4.1.33.10001.1.1.1.1 | ScalarhubID | read-only | mandatory | The hub's Ethernet address. |
| 1.3.6.1.4.1.33.10001.1.1.1.2 | ScalarhubGroupCapacity | read-only | mandatory | The maximum number of groups the hub can have; a constant 1. |
| 1.3.6.1.4.1.33.10001.1.1.1.3 | ScalarhubGroupMap | read-only | mandatory | A bit map of defined groups. |
| 1.3.6.1.4.1.33.10001.1.2 | NodehmBasicGroupTable | |||
| 1.3.6.1.4.1.33.10001.1.2.1 | NodehmBasicGroupEntry | |||
| 1.3.6.1.4.1.33.10001.1.2.1.1 | ScalargroupHubID | read-only | mandatory | The hub's Ethernet address. |
| 1.3.6.1.4.1.33.10001.1.2.1.2 | ScalargroupID | read-only | mandatory | The identification number of the hub's only group; a constant 1. |
| 1.3.6.1.4.1.33.10001.1.2.1.3 | ScalargroupNumberOfPorts | read-only | mandatory | The number of physical Ethernet ports on the hub. |
| 1.3.6.1.4.1.33.10001.1.3 | TablehmBasicPortTable | not-accessible | mandatory | A list of basic hub Ethernet port entries. |
| 1.3.6.1.4.1.33.10001.1.3.1 | RowhmBasicPortEntry | not-accessible | mandatory | Parameter values for a port. |
| 1.3.6.1.4.1.33.10001.1.3.1.1 | ColumnportHubBasicID | read-only | mandatory | The hub's Ethernet address. |
| 1.3.6.1.4.1.33.10001.1.3.1.2 | ColumnportGroupBasicID | read-only | mandatory | Group number; a constant 1. |
| 1.3.6.1.4.1.33.10001.1.3.1.3 | ColumnportBasicID | read-only | mandatory | A unique value for each Ethernet port. Its value ranges between 1 and the value of groupNumberOfPorts. The value for each port must remain constant at least fr… |
| 1.3.6.1.4.1.33.10001.1.3.1.4 | ColumnportType | read-only | mandatory | The port type, with the following meanings: other not listed here repeater 802.3 sec. 9 rptr port tenBASE-FAsync(3) async port on 10BASE-FA tenBASE-FSynch(4) s… |
| 1.3.6.1.4.1.33.10001.1.3.1.5 | ColumnportAdminState | read-write | mandatory | Control over the port's ability to transmit and receive. Corresponds directly to PORT ENABLED/DISABLED and the value labeled 'State:' in the PORT display. |
| 1.3.6.1.4.1.33.10001.1.3.1.6 | ColumnportAutoPartitionState | read-only | mandatory | The port's status with regard to automatic partitioning. Corresponds directly to the value labeled 'Auto Partitioned:' in the PORT display. |
| 1.3.6.1.4.1.33.10001.2 | NodehmSelfTestCapability | |||
| 1.3.6.1.4.1.33.10001.2.1 | NodehmSelfTestHubTable | |||
| 1.3.6.1.4.1.33.10001.2.1.1 | NodehmSelfTestHubEntry | |||
| 1.3.6.1.4.1.33.10001.2.1.1.1 | ScalarhubSelfTestID | read-only | mandatory | The hub's Ethernet address. |
| 1.3.6.1.4.1.33.10001.2.1.1.2 | ScalarhubResetTimeStamp | read-only | mandatory | The value of sysUpTime when the hub was last reset. |
| 1.3.6.1.4.1.33.10001.2.1.1.3 | ScalarhubHealthState | read-only | mandatory | Indication of hub operational failure. |
| 1.3.6.1.4.1.33.10001.2.1.1.4 | ScalarhubHealthText | read-only | mandatory | Free form text description of hub operational state. |
| 1.3.6.1.4.1.33.10001.2.1.1.5 | ScalarhubHealthData | read-only | mandatory | Free form binary data description of hub operational state. |
| 1.3.6.1.4.1.33.10001.2.1.1.6 | ScalarhubSystemResetting | read-write | mandatory | Control to cause initialization of hub, reset of management counters, ad reset of hub parameters to defaults. |
| 1.3.6.1.4.1.33.10001.2.1.1.7 | ScalarhubResetting | read-write | mandatory | Control to cause initialization of the relay and port counters and flags related to the auto-partition function. This does not affect hub management counters. |
| 1.3.6.1.4.1.33.10001.2.1.1.8 | ScalarhubExecutingSelfTest | read-write | mandatory | Control to cause execution of a non-disruptive self test. |
| 1.3.6.1.4.1.33.10001.3 | NodehmPerfMonCapability | |||
| 1.3.6.1.4.1.33.10001.3.1 | NodehmPerfMonRelayTable | |||
| 1.3.6.1.4.1.33.10001.3.1.1 | NodehmPerfMonRelayEntry | |||
| 1.3.6.1.4.1.33.10001.3.1.1.1 | ScalarrelayHubPerfID | read-only | mandatory | The hub's Ethernet address. |
| 1.3.6.1.4.1.33.10001.3.1.1.2 | ScalarrelayPerfID | read-only | mandatory | Relay identification; a constant 1. |
| 1.3.6.1.4.1.33.10001.3.1.1.3 | ScalarrelayTotalCollisions | read-only | mandatory | The number of times the hub transmitted and simultaneously detected external activity on one or more ports. |
| 1.3.6.1.4.1.33.10001.3.2 | TablehmPerfMonPortTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.33.10001.3.2.1 | RowhmPerfMonPortEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.33.10001.3.2.1.1 | ColumnportHubPerfID | read-only | mandatory | The hub's Ethernet address. |
| 1.3.6.1.4.1.33.10001.3.2.1.2 | ColumnportGroupPerfID | read-only | mandatory | The group number; a constant 1. |
| 1.3.6.1.4.1.33.10001.3.2.1.3 | ColumnportPerfID | read-only | mandatory | A unique value for each Ethernet port, identifying the same port as the equivalent value of portBasicID. |
| 1.3.6.1.4.1.33.10001.3.2.1.4 | ColumnportReadableFrames | read-only | mandatory | Number of frames received with legal length and no corruption in transmission. Corresponds directly with the value labeled 'Received Frames:' in the PORT displ… |
| 1.3.6.1.4.1.33.10001.3.2.1.5 | ColumnportReadableOctets | read-only | mandatory | The number of data and padding bytes represented by portReadableFrames. |
| 1.3.6.1.4.1.33.10001.3.2.1.6 | ColumnportPygmys | read-only | mandatory | Number of message fragments less than 64 +/- 10 bits long, possibly indicating external noise problems. Corresponds directly with the value labeled 'Fragments … |
| 1.3.6.1.4.1.33.10001.3.2.1.7 | ColumnportRunts | read-only | mandatory | Number of collision fragments longer than a pygmy but shorter than a legal message. These occur as a result of normal collision operation. Corresponds directly… |
| 1.3.6.1.4.1.33.10001.3.2.1.8 | ColumnportFrameCheckSeqErrs | read-only | mandatory | Number of frames received with integral bytes but invalid FCS. Corresponds directly with the value labeled 'Check Sequenct (CRC):' in the PORT display. |
| 1.3.6.1.4.1.33.10001.3.2.1.9 | ColumnportAlignmentErrors | read-only | mandatory | Number of frames received with an incomplete bytes. |
| 1.3.6.1.4.1.33.10001.3.2.1.10 | ColumnportFramesTooLong | read-only | mandatory | Number of frames received of length greater than 1518 bytes. Corresponds directly with the value labeled 'Long Frames (>1518):' in the PORT display. |
| 1.3.6.1.4.1.33.10001.3.2.1.11 | ColumnportAutoPartitionCount | read-only | mandatory | Number of times the repeater has automatically partitioned the port. Corresponds directly with the value labeled 'Auto Partitions:' in the PORT display. |
| 1.3.6.1.4.1.33.10001.4 | NodehmAddrTrackCapability | |||
| 1.3.6.1.4.1.33.10001.4.1 | TablehmAddrTrackPortTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.33.10001.4.1.1 | RowhmAddrTrackPortEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.33.10001.4.1.1.1 | ColumnportHubAddrID | read-only | mandatory | The hub's Ethernet address. |
| 1.3.6.1.4.1.33.10001.4.1.1.2 | ColumnportGroupAddrID | read-only | mandatory | The group number; a constant 1. |
| 1.3.6.1.4.1.33.10001.4.1.1.3 | ColumnportAddrID | read-only | mandatory | A unique value for each Ethernet port, identifying the same port as the equivalent value of portBasicID. |
| 1.3.6.1.4.1.33.10001.4.1.1.4 | ColumnportLastSourceAddress | read-only | mandatory | Source address of the last readable frame received on the port. Corresponds directly with the value labeled 'Last Address:' in the PORT display. |
| 1.3.6.1.4.1.33.10001.4.1.1.5 | ColumnportSourceAddrChanges | read-only | mandatory | Number of times portLastSourceAddress has changed. Corresponds directly with the value labeled 'Address Changes:' in the PORT display. |
| 1.3.6.1.4.1.33.10001.5 | NodehmBadBitClockCapability | |||
| 1.3.6.1.4.1.33.10001.5.1 | TablehmBadBitClockPortTable | not-accessible | mandatory | |
| 1.3.6.1.4.1.33.10001.5.1.1 | RowhmBadBitClockPortEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.33.10001.5.1.1.1 | ColumnportHubClockID | read-only | mandatory | The hub's Ethernet address. |
| 1.3.6.1.4.1.33.10001.5.1.1.2 | ColumnportGroupClockID | read-only | mandatory | The group number; a constant 1. |
| 1.3.6.1.4.1.33.10001.5.1.1.3 | ColumnportClockID | read-only | mandatory | A unique value for each Ethernet port, identifying the same port as the equivalent value of portBasicID. |
| 1.3.6.1.4.1.33.10001.5.1.1.4 | ColumnportOutOfSpecBitRate | read-only | mandatory | Number of received frames with the transmission frequency detectably out of specification. Corresponds directly with the value labeled 'Out of Spec. Bit Rate:'… |