XYPLEX-INTERNET-MIB
285 objects
No module-level DESCRIPTION found.
Imported Objects
| RFC1155-SMI | Counter enterprises Gauge IpAddress |
| RFC1158-MIB | DisplayString |
| RFC1212-CONCISE-MIB MISSING | OBJECT-TYPE |
| XYPLEX-SYSTEM-MIB | AddressType DateTime |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.33 | Nodexyplex | |||
| 1.3.6.1.4.1.33.4 | NodexInternetDep | |||
| 1.3.6.1.4.1.33.10 | NodexInternet | |||
| 1.3.6.1.4.1.33.10.1 | NodexIp | |||
| 1.3.6.1.4.1.33.10.1.1 | ScalaripGatewayAddress1 | read-write | mandatory | The internet address of the system's primary (first choice) gateway. A value of 0.0.0.0 indicates no address. Corresponds directly to SERVER INTERNET PRIMARY G… |
| 1.3.6.1.4.1.33.10.1.2 | ScalaripGatewayAddress2 | read-write | mandatory | The internet address of the system's secondary (second choice) gateway. A value of 0.0.0.0 indicates no address. Corresponds directly to SERVER INTERNET SECOND… |
| 1.3.6.1.4.1.33.10.1.3 | ScalaripAutoSubnetMask | read-write | mandatory | A control for automatic determination of subnet mask. 'disabled' indicates the system must use the mask as configured by the network manager. 'enabled' indicat… |
| 1.3.6.1.4.1.33.10.1.4 | ScalaripReassembly | read-write | mandatory | A control for reassembly of IP fragments. Corresponds directly to SERVER INTERNET REASSEMBLY and the value labeled 'Reassembly:' in the SERVER INTERNET CHARACT… |
| 1.3.6.1.4.1.33.10.2 | NodexTcp | |||
| 1.3.6.1.4.1.33.10.2.1 | TabletcpPortTable | not-accessible | mandatory | A list of TCP character port entries. |
| 1.3.6.1.4.1.33.10.2.1.1 | RowtcpPortEntry | not-accessible | mandatory | TCP parameter values for a character port. |
| 1.3.6.1.4.1.33.10.2.1.1.1 | ColumntcpPortIndex | read-only | mandatory | An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by charPortIndex in the … |
| 1.3.6.1.4.1.33.10.2.1.1.2 | ColumntcpPortConnectByAddress | read-write | mandatory | A control for requesting outgoing connection by internet address. 'disabled' indicates outgoing connections must be by Domain name. 'enabled' indicates that ou… |
| 1.3.6.1.4.1.33.10.2.1.1.3 | ColumntcpPortWindowSize | read-write | mandatory | Size of the TCP window for TCP connections on the port. Corresponds directly to PORT INTERNET TCP WINDOW SIZE and the value labeled 'TCP Window Size:' in the P… |
| 1.3.6.1.4.1.33.10.3 | NodesnmpAgent | |||
| 1.3.6.1.4.1.33.10.3.1 | ScalarsnmpAgentGetCommunity | read-write | mandatory | The SNMP community name allowed to perform get-requests or get-next requests to this agent. Use of this value is case-insensitive. If the size is 0, the agent … |
| 1.3.6.1.4.1.33.10.3.2 | ScalarsnmpAgentSetCommunity | read-write | mandatory | The SNMP community name allowed to perform set-requests to this agent. Use of this value is case-insensitive. If the size is 0, the agent does not check the co… |
| 1.3.6.1.4.1.33.10.3.3 | ScalarsnmpAgentTrapCommunity | read-write | mandatory | The SNMP community name sent in traps from this agent. Use of this value preserves case. Corresponds directly to SERVER INTERNET SNMP TRAP COMMUNITY and the va… |
| 1.3.6.1.4.1.33.10.3.4 | ScalarsnmpAgentGetClientNumber | read-only | mandatory | The number of client source addresses allowed to perform get-requests or get-next requests to this agent. If the value is 0, the agent does not check source ad… |
| 1.3.6.1.4.1.33.10.3.5 | ScalarsnmpAgentSetClientNumber | read-only | mandatory | The number of client source addresses allowed to perform set-requests to this agent. If the value is 0, the agent does not check source address for these opera… |
| 1.3.6.1.4.1.33.10.3.6 | ScalarsnmpAgentTrapClientNumber | read-only | mandatory | The number of client source addresses to which this agent sends traps. If the value is 0, the agent does not perform this operation. Corresponds indirectly to … |
| 1.3.6.1.4.1.33.10.3.7 | TablegetClientTable | not-accessible | mandatory | A list of get client entries. The number of entries is given by the value of snmpAgentGetClientNumber. |
| 1.3.6.1.4.1.33.10.3.7.1 | RowgetClientEntry | not-accessible | mandatory | Parameter values for a get client. |
| 1.3.6.1.4.1.33.10.3.7.1.1 | ColumngetClientIndex | read-only | mandatory | Identification of a get client entry. Corresponds directly to the number in the label 'Get Client n:' in the SERVER INTERNET SNMP CHARACTERISTICS display. |
| 1.3.6.1.4.1.33.10.3.7.1.2 | ColumngetClientEntryStatus | read-write | mandatory | Status of this entry. Setting the value to 'invalid' invalidates the entry. It is an implementation-specific matter as to whether the agent removes an invalida… |
| 1.3.6.1.4.1.33.10.3.7.1.3 | ColumngetClientAddressType | read-write | mandatory | The type of network address contained in getClientAddress. 'unknown' means no address has been defined. 'other' means no other type value applies. 'ip' is an I… |
| 1.3.6.1.4.1.33.10.3.7.1.4 | ColumngetClientAddress | read-write | mandatory | The client's network address. If getClientAddressType does not accompany getClientAddress in a set request, the default type is 'ip'. Corresponds directly to t… |
| 1.3.6.1.4.1.33.10.3.8 | TablesetClientTable | not-accessible | mandatory | A list of set client entries. The number of entries is given by the value of snmpAgentSetClientNumber. |
| 1.3.6.1.4.1.33.10.3.8.1 | RowsetClientEntry | not-accessible | mandatory | Parameter values for a set client. |
| 1.3.6.1.4.1.33.10.3.8.1.1 | ColumnsetClientIndex | read-only | mandatory | Identification of a set client entry. Corresponds directly to the number in the label 'Set Client n:' in the SERVER INTERNET SNMP CHARACTERISTICS display. |
| 1.3.6.1.4.1.33.10.3.8.1.2 | ColumnsetClientEntryStatus | read-write | mandatory | Status of this entry. Setting the value to 'invalid' invalidates the entry. It is an implementation-specific matter as to whether the agent removes an invalida… |
| 1.3.6.1.4.1.33.10.3.8.1.3 | ColumnsetClientAddressType | read-write | mandatory | The type of network address contained in setClientAddress. 'unknown' means no address has been defined. 'other' means no other type value applies. 'ip' is an I… |
| 1.3.6.1.4.1.33.10.3.8.1.4 | ColumnsetClientAddress | read-write | mandatory | The client's network address. When setting this value, the requester must supply setClientAddressType. If setClientAddressType does not accompany setClientAddr… |
| 1.3.6.1.4.1.33.10.3.9 | TabletrapClientTable | not-accessible | mandatory | A list of trap client entries. The number of entries is given by the value of snmpAgentTrapClientNumber. |
| 1.3.6.1.4.1.33.10.3.9.1 | RowtrapClientEntry | not-accessible | mandatory | Parameter values for a trap client. |
| 1.3.6.1.4.1.33.10.3.9.1.1 | ColumntrapClientIndex | read-only | mandatory | Identification of a trap client entry. Corresponds directly to the number in the label 'Trap Client n:' in the SERVER INTERNET SNMP CHARACTERISTICS display. |
| 1.3.6.1.4.1.33.10.3.9.1.2 | ColumntrapClientEntryStatus | read-write | mandatory | Status of this entry. Setting the value to 'invalid' invalidates the entry. It is an implementation-specific matter as to whether the agent removes an invalida… |
| 1.3.6.1.4.1.33.10.3.9.1.3 | ColumntrapClientAddressType | read-write | mandatory | The type of network address contained in trapClientAddress. 'unknown' means no address has been defined. 'other' means no other type value applies. 'ip' is an … |
| 1.3.6.1.4.1.33.10.3.9.1.4 | ColumntrapClientAddress | read-write | mandatory | The client's network address. When setting this value, the requester must supply trapClientAddressType. If trapClientAddressType does not accompany trapClientA… |
| 1.3.6.1.4.1.33.10.4 | NodedomainResolver | |||
| 1.3.6.1.4.1.33.10.4.1 | ScalardomainResolverSuffix | read-write | mandatory | A partial domain name for the server to append to the end of an incomplete domain name provided by the user. Corresponds directly to SERVER INTERNET DEFAULT DO… |
| 1.3.6.1.4.1.33.10.4.2 | ScalardomainResolverAddress1 | read-write | mandatory | The internet address of a Domain Name Server. The system can use one or two such addresses, without preference. A value of 0.0.0.0 indicates no address. Corres… |
| 1.3.6.1.4.1.33.10.4.3 | ScalardomainResolverAddress2 | read-write | mandatory | The internet address of a Domain Name Server. The system can use one or two such addresses, without preference. A value of 0.0.0.0 indicates no address. Corres… |
| 1.3.6.1.4.1.33.10.4.4 | ScalardomainResolverTtl | read-write | mandatory | The number of hours to keep received Domain information. Corresponds directly to SERVER INTERNET DOMAIN TTL and the value labeled ' Domain TTL:' in the SERVER … |
| 1.3.6.1.4.1.33.10.4.5 | ScalardomainResolverNameNumber | read-only | mandatory | The number of Domain name mappings in this system's name cache. |
| 1.3.6.1.4.1.33.10.4.6 | TablenameTable | not-accessible | mandatory | A list of Domain name entries. The number of entries is given by the value of domainResolverNameNumber. |
| 1.3.6.1.4.1.33.10.4.6.1 | RownameEntry | not-accessible | mandatory | Parameter values for a Domain name. |
| 1.3.6.1.4.1.33.10.4.6.1.1 | ColumnnameName | read-only | mandatory | A fully qualified domain name. Corresponds directly to the value labeled 'Domain Name' in the DOMAIN display. |
| 1.3.6.1.4.1.33.10.4.6.1.2 | ColumnnameAddress | read-write | mandatory | An Internet address corresponding to the Domain name. Corresponds directly to the value labeled 'Internet Address' in the DOMAIN display. |
| 1.3.6.1.4.1.33.10.4.6.1.3 | ColumnnameStatus | read-write | mandatory | The status of the entry. Set to 'invalid' to remove the entry, which corresponds directly to the PURGE DOMAIN command. Actual removal of the entry is implement… |
| 1.3.6.1.4.1.33.10.4.6.1.4 | ColumnnameSource | read-only | mandatory | Source of this entry. The value meanings are: local defined by manager (LOCAL) primary obtained from a primary name server secondary obtained from a secondary … |
| 1.3.6.1.4.1.33.10.4.6.1.5 | ColumnnameTtl | read-only | mandatory | The number of minutes remaining in the entry's time to live. Corresponds directly to the value labeled 'TTL' in the DOMAIN display. |
| 1.3.6.1.4.1.33.10.5 | Nodeslip | |||
| 1.3.6.1.4.1.33.10.5.1 | TableslipTable | not-accessible | mandatory | A list of SLIP character port entries. |
| 1.3.6.1.4.1.33.10.5.1.1 | RowslipEntry | not-accessible | mandatory | Parameter values for a SLIP port. |
| 1.3.6.1.4.1.33.10.5.1.1.1 | ColumnslipIndex | read-only | mandatory | An index value that uniquely identifies a port that can run SLIP. The port identified by a particular value of this index is the same port as identified by cha… |
| 1.3.6.1.4.1.33.10.5.1.1.2 | ColumnslipState | read-write | mandatory | A control indicating whether SLIP is in operation on the port. Corresponds directly to PORT INTERNET SLIP and the value labeled 'SLIP' in the PORT CHARACTERIST… |
| 1.3.6.1.4.1.33.10.5.1.1.3 | ColumnslipLocalAddress | read-write | mandatory | The IP address assigned to the port. Corresponds directly to PORT SLIP ADDRESS and the value labeled 'SLIP Address:' in the PORT ALTERNATE CHARACTERISTICS disp… |
| 1.3.6.1.4.1.33.10.5.1.1.4 | ColumnslipRemoteAddress | read-write | mandatory | The IP address of the remote system attached to the port. Corresponds directly to PORT SLIP REMOTE and the value labeled 'Remote SLIP Address:' in the PORT ALT… |
| 1.3.6.1.4.1.33.10.5.1.1.5 | ColumnslipMask | read-write | mandatory | The subnet mask to use for SLIP operation on the port. Corresponds directly to PORT SLIP MASK and the value labeled 'SLIP Mask:' in the PORT ALTERNATE CHARACTE… |
| 1.3.6.1.4.1.33.10.5.1.1.6 | ColumnslipPortPacketsReceived | read-only | mandatory | The number of SLIP packets received from the port. Corresponds directly to the value labeled 'Serial Packets Received:' in the PORT COUNTERS display. |
| 1.3.6.1.4.1.33.10.5.1.1.7 | ColumnslipPortPacketsSent | read-only | mandatory | The number of SLIP packets sent to the port. Corresponds directly to the value labeled 'Serial Packets Sent:' in the PORT COUNTERS display. |
| 1.3.6.1.4.1.33.10.5.1.1.8 | ColumnslipPortPacketsDiscarded | read-only | mandatory | The number of SLIP packets received from the port and discarded. Corresponds directly to the value labeled 'Serial Packets Discarded:' in the PORT COUNTERS dis… |
| 1.3.6.1.4.1.33.10.5.1.1.9 | ColumnslipPortPacketLengthErrors | read-only | mandatory | The number of SLIP packets received from the port with an incorrect number of bytes. Corresponds directly to the value labeled 'Serial Packet Length Errors:' i… |
| 1.3.6.1.4.1.33.10.5.1.1.10 | ColumnslipPortPacketChecksumErrors | read-only | mandatory | The number of SLIP packets received from the port with an invalid checksum. Corresponds directly to the value labeled 'Serial Packet Checksum Errors:' in the P… |
| 1.3.6.1.4.1.33.10.5.1.1.11 | ColumnslipNetworkPacketsReceived | read-only | mandatory | The number of SLIP packets received from the network for this port. Corresponds directly to the value labeled 'Network Packets Received:' in the PORT COUNTERS … |
| 1.3.6.1.4.1.33.10.5.1.1.12 | ColumnslipNetworkPacketsSent | read-only | mandatory | The number of SLIP packets sent to the network from this port. Corresponds directly to the value labeled 'Network Packets Sent:' in the PORT COUNTERS display. |
| 1.3.6.1.4.1.33.10.5.1.1.13 | ColumnslipNetworkPacketsDiscarded | read-only | mandatory | The number of SLIP packets received from the network for this port and discarded. Corresponds directly to the value labeled 'Network Packets Discarded:' in the… |
| 1.3.6.1.4.1.33.10.6 | Nodetelnet | |||
| 1.3.6.1.4.1.33.10.6.1 | TabletelnetPortTable | not-accessible | mandatory | A list of Telnet character port entries. |
| 1.3.6.1.4.1.33.10.6.1.1 | RowtelnetPortEntry | not-accessible | mandatory | Telnet parameter values for a character port. |
| 1.3.6.1.4.1.33.10.6.1.1.1 | ColumntelnetPortIndex | read-only | mandatory | An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by charPortIndex in the … |
| 1.3.6.1.4.1.33.10.6.1.1.2 | ColumntelnetPortIncomingTcpPort | read-write | mandatory | The TCP port number offered for incoming connections to this character port. Corresponds directly to PORT TELNET REMOTE PORT and the value labeled 'Remote Port… |
| 1.3.6.1.4.1.33.10.6.1.1.3 | ColumntelnetPortOutgoingTcpPort | read-only | mandatory | The TCP port number used by default for outgoing connections from this character port. Corresponds directly to PORT TELNET DEFAULT PORT and the value labeled '… |
| 1.3.6.1.4.1.33.10.6.1.1.4 | ColumntelnetPortNewlineTranslation | read-write | mandatory | Translation to apply to newline sequences (CR/NULL or CR/LF) received from the network, before sending the newline to the character port. The value indicates t… |
| 1.3.6.1.4.1.33.10.6.1.1.5 | ColumntelnetPortTerminalType | read-write | mandatory | The terminal type character string for Telnet negotiations. Corresponds directly to PORT TELNET TERMINALTYPE and the value labeled 'TerminalType:' in the PORT … |
| 1.3.6.1.4.1.33.10.6.1.1.6 | ColumntelnetPortEorReflection | read-write | mandatory | Control for end-of-record handshake. Corresponds directly to PORT TELNET EOR REFLECTION and the value labeled 'EOR Reflection:' in the PORT TELNET CHARACTERIST… |
| 1.3.6.1.4.1.33.10.6.1.1.7 | ColumntelnetPortBinaryMode | read-write | mandatory | Control for operation of Telnet binary mode. The value meanings are: disabled refuse binary mode negotiation (INTERACTIVE) flowControl pass all but XON and XOF… |
| 1.3.6.1.4.1.33.10.6.2 | TabletelnetSerialPortTable | not-accessible | mandatory | A list of Telnet character port entries. |
| 1.3.6.1.4.1.33.10.6.2.1 | RowtelnetSerialPortEntry | not-accessible | mandatory | Telnet parameter values for a character port. |
| 1.3.6.1.4.1.33.10.6.2.1.1 | ColumntelnetSerialPortIndex | read-only | mandatory | An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by charPortIndex in the … |
| 1.3.6.1.4.1.33.10.6.2.1.2 | ColumntelnetSerialPortOptionDisplay | read-write | mandatory | Control for display of Telnet option negotiations. Corresponds directly to PORT TELNET OPTION DISPLAY and the value labeled 'Option Display:' in the PORT TELNE… |
| 1.3.6.1.4.1.33.10.6.2.1.3 | ColumntelnetSerialPortCsiEscape | read-write | mandatory | Control for translation of 8-bit escape sequences received from the character port to 7-bit equivalents before transmission to the remote partner. Corresponds … |
| 1.3.6.1.4.1.33.10.6.2.1.4 | ColumntelnetSerialPortEchoMode | read-write | mandatory | Control for who echoes characters that come from the character port. The value meanings are: local terminal server echoes locally remote remote system echoes C… |
| 1.3.6.1.4.1.33.10.6.2.1.5 | ColumntelnetSerialPortNewlineMode | read-write | mandatory | Translation to apply to newline (carriage return) received from the character port, before sending the newline to the remote partner. The correspondence to com… |
| 1.3.6.1.4.1.33.10.6.2.1.6 | ColumntelnetSerialPortTransmitMode | read-write | mandatory | Criterion for deciding to send to the remote partner characters received from the character port. Corresponds directly to PORT TELNET TRANSMIT and the value la… |
| 1.3.6.1.4.1.33.10.6.2.1.7 | ColumntelnetSerialPortTransmitCharacterTimes | read-write | mandatory | Number of character times to wait before transmitting when telnetSerialPortTransmitMode value is 'timed'. Corresponds directly to PORT TELNET TRANSMIT IDLETIME… |
| 1.3.6.1.4.1.33.10.6.2.1.8 | ColumntelnetSerialPortAbortOutputCharacter | read-write | mandatory | Character input from the character port to cause aborting output. The value 0 indicates no character has this effect. Corresponds directly to PORT TELNET ABORT… |
| 1.3.6.1.4.1.33.10.6.2.1.9 | ColumntelnetSerialPortAttentionCharacter | read-write | mandatory | Character input from the character port to cause an attention notification to the remote partner. The value 0 indicates no character has this effect. Correspon… |
| 1.3.6.1.4.1.33.10.6.2.1.10 | ColumntelnetSerialPortEraseKeyCharacter | read-write | mandatory | Character input from the character port to cause erasure of the previous input character. The value 0 indicates no character has this effect. Corresponds direc… |
| 1.3.6.1.4.1.33.10.6.2.1.11 | ColumntelnetSerialPortEraseLineCharacter | read-write | mandatory | Character input from the character port to cause erasure of the previous line of input. The value 0 indicates no character has this effect. Corresponds directl… |
| 1.3.6.1.4.1.33.10.6.2.1.12 | ColumntelnetSerialPortInterruptCharacter | read-write | mandatory | Character input from the character port to cause sending an interrupt notification to the remote partner. The value 0 indicates no character has this effect. C… |
| 1.3.6.1.4.1.33.10.6.2.1.13 | ColumntelnetSerialPortQueryCharacter | read-write | mandatory | Character input from the character port to cause sending a status query to the remote partner. The value 0 indicates no character has this effect. Corresponds … |
| 1.3.6.1.4.1.33.10.6.2.1.14 | ColumntelnetSerialPortSynchronizeCharacter | read-write | mandatory | Character input from the character port to cause sending a synchronization attempt to the remote partner. The value 0 indicates no character has this effect. C… |
| 1.3.6.1.4.1.33.10.7 | Nodetn3270 | |||
| 1.3.6.1.4.1.33.10.7.1 | Scalartn3270DeviceNumber | read-only | mandatory | The number of entries in the tn3270 Device table. |
| 1.3.6.1.4.1.33.10.7.2 | Scalartn3270LanguageNumber | read-only | mandatory | The number of entries in the tn3270 Language table. |
| 1.3.6.1.4.1.33.10.7.3 | Scalartn3270PortKeymapStatus | read-write | mandatory | Control for individual ports to create their own keymaps. Corresponds directly to SERVER TN3270 PORT KEYMAPS and the value labeled 'Port Keymaps:' in the SERVE… |
| 1.3.6.1.4.1.33.10.7.4 | Tabletn3270DeviceTable | not-accessible | mandatory | A list of tn3270 terminal device entries. |
| 1.3.6.1.4.1.33.10.7.4.1 | Rowtn3270DeviceEntry | not-accessible | mandatory | Tn3270 parameter values for a terminal device entry. |
| 1.3.6.1.4.1.33.10.7.4.1.1 | Columntn3270DeviceName | read-write | mandatory | The name of a generic terminal device. Corresponds directly to SERVER TN3270 DEVICE and the value labeled 'Device Name:' in the SERVER TN3270 DEVICE display. |
| 1.3.6.1.4.1.33.10.7.4.1.2 | Columntn3270DeviceStatus | read-write | mandatory | Status of this entry. Setting the value to 'invalid' invalidates the entry, corresponding directly to the PURGE SERVER TN3270 DEVICE command. It is an implemen… |
| 1.3.6.1.4.1.33.10.7.4.1.3 | Columntn3270DeviceType | read-write | mandatory | The terminal type character string for use when tn3270DeviceTn3270Type is insufficient. Corresponds directly to SERVER TN3270 DEVICE TERMINALTYPE and the value… |
| 1.3.6.1.4.1.33.10.7.4.1.4 | Columntn3270Device3278Model | read-write | mandatory | The 3278 model for the device. Corresponds directly to SERVER TN3270 DEVICE TN3278Model and the value labeled 'Tn3278Model:' in the SERVER TN3270 DEVICE displa… |
| 1.3.6.1.4.1.33.10.7.4.1.5 | Columntn3270DeviceKeyNumber | read-only | mandatory | The number of Key table entries for this device. |
| 1.3.6.1.4.1.33.10.7.4.1.6 | Columntn3270DeviceScreenNumber | read-only | mandatory | The number of Screen table entries for this device. |
| 1.3.6.1.4.1.33.10.7.5 | Tabletn3270KeyTable | not-accessible | mandatory | A list of tn3270 key entries by device. |
| 1.3.6.1.4.1.33.10.7.5.1 | Rowtn3270KeyEntry | not-accessible | mandatory | Tn3270 parameter values for a key entry for a device. |
| 1.3.6.1.4.1.33.10.7.5.1.1 | Columntn3270KeyDeviceName | read-only | mandatory | The name of a generic terminal device as in tn3270DeviceName. Corresponds directly to SERVER TN3270 DEVICE and the value labeled 'Device Name:' in the SERVER T… |
| 1.3.6.1.4.1.33.10.7.5.1.2 | Columntn3270KeyName | read-only | mandatory | The key name to which this entry applies. Corresponds directly to the key portion of SERVER TN3270 DEVICE KEYMAP and the value labeled '3270-key' in the 'Keyma… |
| 1.3.6.1.4.1.33.10.7.5.1.3 | Columntn3270KeyStatus | read-write | mandatory | Status of this entry. Setting the value to 'invalid' invalidates the entry. It is an implementation-specific matter as to whether the agent removes an invalida… |
| 1.3.6.1.4.1.33.10.7.5.1.4 | Columntn3270KeyCharacterSequence | read-write | mandatory | The ASCII character sequence for the key. Corresponds directly to the escape-sequence portion of SERVER TN3270 DEVICE KEYMAP and the value labeled 'KeyCode' in… |
| 1.3.6.1.4.1.33.10.7.5.1.5 | Columntn3270KeyDescription | read-write | mandatory | Descriptive text for the key. Corresponds directly to the description portion of SERVER TN3270 DEVICE KEYMAP and the value labeled 'Description' in the SERVER … |
| 1.3.6.1.4.1.33.10.7.6 | Tabletn3270ScreenTable | not-accessible | mandatory | A list of tn3270 screen action entries by device. |
| 1.3.6.1.4.1.33.10.7.6.1 | Rowtn3270ScreenEntry | not-accessible | mandatory | Tn3270 parameter values for a screen action entry for a device. |
| 1.3.6.1.4.1.33.10.7.6.1.1 | Columntn3270ScreenDeviceName | read-only | mandatory | The name of a generic terminal device as in tn3270DeviceName. Corresponds directly to SERVER TN3270 DEVICE and the value labeled 'Device Name:' in the SERVER T… |
| 1.3.6.1.4.1.33.10.7.6.1.2 | Columntn3270ScreenActionName | read-only | mandatory | The screen action to which this entry applies. Corresponds directly to the action portion of SERVER TN3270 DEVICE SCREENMAP and the value labeled 'Terminal Fun… |
| 1.3.6.1.4.1.33.10.7.6.1.3 | Columntn3270ScreenStatus | read-write | mandatory | Status of this entry. Setting the value to 'invalid' invalidates the entry. It is an implementation-specific matter as to whether the agent removes an invalida… |
| 1.3.6.1.4.1.33.10.7.6.1.4 | Columntn3270ScreenCharacterSequence | read-write | mandatory | The ASCII character sequence for the screen action. Some actions may have a lesser length limit. Corresponds directly to the escape-sequence portion of SERVER … |
| 1.3.6.1.4.1.33.10.7.7 | Tabletn3270LanguageTable | not-accessible | mandatory | A list of tn3270 language entries. |
| 1.3.6.1.4.1.33.10.7.7.1 | Rowtn3270LanguageEntry | not-accessible | mandatory | Tn3270 parameter values for a language entry. |
| 1.3.6.1.4.1.33.10.7.7.1.1 | Columntn3270LanguageName | read-write | mandatory | The name of language for character translation tables. Corresponds directly to SERVER TN3270 LANGUAGE and the value labeled 'Language Name:' in the SERVER LANG… |
| 1.3.6.1.4.1.33.10.7.7.1.2 | Columntn3270LanguageStatus | read-write | mandatory | Status of this entry. Setting the value to 'invalid' invalidates the entry. It is an implementation-specific matter as to whether the agent removes an invalida… |
| 1.3.6.1.4.1.33.10.7.8 | TableeToALanguageTable | not-accessible | mandatory | A list of language EBCDIC to ASCII conversion entries. |
| 1.3.6.1.4.1.33.10.7.8.1 | RoweToALanguageEntry | not-accessible | mandatory | EBCDIC to ASCII parameter values for a language entry. |
| 1.3.6.1.4.1.33.10.7.8.1.1 | ColumneToALanguageName | read-only | mandatory | The name of language from the language table. |
| 1.3.6.1.4.1.33.10.7.8.1.2 | ColumneToAOffset | read-only | mandatory | EBCDIC character offset plus one, that is, the value 1 corresponds to an operational offset of 0. Corresponds directly to the offset portion of SERVER TN3270 L… |
| 1.3.6.1.4.1.33.10.7.8.1.3 | ColumneToAValue | read-write | mandatory | ASCII character value for the EBCDIC offset. Corresponds directly to the value portion of SERVER TN3270 LANGUAGE and the values in the conversion table labeled… |
| 1.3.6.1.4.1.33.10.7.9 | TableaToELanguageTable | not-accessible | mandatory | A list of language ASCII to EBCDIC conversion entries. |
| 1.3.6.1.4.1.33.10.7.9.1 | RowaToELanguageEntry | not-accessible | mandatory | ASCII to EBCDIC parameter values for a language entry. |
| 1.3.6.1.4.1.33.10.7.9.1.1 | ColumnaToELanguageName | read-only | mandatory | The name of language from the language table. |
| 1.3.6.1.4.1.33.10.7.9.1.2 | ColumnaToEOffset | read-only | mandatory | ASCII character offset plus one, that is, the value 1 corresponds to an operational offset of 0. Corresponds directly to the offset portion of SERVER TN3270 LA… |
| 1.3.6.1.4.1.33.10.7.9.1.3 | ColumnaToEValue | read-write | mandatory | EBCDIC character value for the ASCII offset. Corresponds directly to the value portion of SERVER TN3270 LANGUAGE and the values in the conversion table labeled… |
| 1.3.6.1.4.1.33.10.7.10 | Tabletn3270PortTable | not-accessible | mandatory | A list of tn3270 character port entries. |
| 1.3.6.1.4.1.33.10.7.10.1 | Rowtn3270PortEntry | not-accessible | mandatory | Parameter values for a tn3270 port. |
| 1.3.6.1.4.1.33.10.7.10.1.1 | Columntn3270PortIndex | read-only | mandatory | An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by charPortIndex in the … |
| 1.3.6.1.4.1.33.10.7.10.1.2 | Columntn3270PortDeviceName | read-write | mandatory | The name of a generic terminal device from the tn3270 device table. Corresponds directly to PORT TELNET TN3270 DEVICE and the value labeled 'Tn3270 Device:' in… |
| 1.3.6.1.4.1.33.10.7.10.1.3 | Columntn3270PortLanguageName | read-write | mandatory | The name of language from the tn3270 language table. Corresponds directly to PORT TELNET TN3270 LANGUAGE and the value labeled 'Tn3270 Language:' in the PORT T… |
| 1.3.6.1.4.1.33.10.7.10.1.4 | Columntn3270PortExtendedAttributes | read-write | mandatory | A control indicating that certain 3270 extended attributes are supported on the port. Corresponds directly to PORT TELNET TN3270 XTDATTRS and the label 'Tn3270… |
| 1.3.6.1.4.1.33.10.7.10.1.5 | Columntn3270PortEorNegotiation | read-write | mandatory | A control for negotiation of the Telnet EOR option when establishing a tn3270 session on the port. Corresponds directly to PORT TELNET TN3270 EOR and the label… |
| 1.3.6.1.4.1.33.10.7.10.1.6 | Columntn3270PortErrorLock | read-write | mandatory | A control for requiring use the RESET key when the host reports an error during a tn3270 session on the port. Corresponds directly to PORT TELNET TN3270 ERRORL… |
| 1.3.6.1.4.1.33.10.8 | Nodekerberos | |||
| 1.3.6.1.4.1.33.10.8.1 | ScalarkerbStatus | read-write | mandatory | A control indicating the level of Kerberos operation on the system. Corresponds directly to SERVER KERBEROS STATUS and the value labeled 'Kerberos Security:' i… |
| 1.3.6.1.4.1.33.10.8.2 | ScalarkerbRealm | read-write | mandatory | The Kerberos realm with which the kerbServerName1 and kerbServerName2 are associated. Corresponds directly to SERVER KERBEROS REALM and the value labeled 'Kerb… |
| 1.3.6.1.4.1.33.10.8.3 | ScalarkerbQueryLimit | read-write | mandatory | The maximum number of attempts the system can make when trying to verify a Kerberos ID. Corresponds directly to SERVER KERBEROS QUERY LIMIT and the value label… |
| 1.3.6.1.4.1.33.10.8.4 | ScalarkerbMasterName | read-write | mandatory | The Domain name of the Kerberos master host system, which holds the Kerberos database. Corresponds directly to SERVER KERBEROS MASTER and the value labeled 'Ke… |
| 1.3.6.1.4.1.33.10.8.5 | ScalarkerbServerName1 | read-write | mandatory | The Domain name of the first Kerberos server to try when the system verifys a Kerberos ID. Corresponds directly to SERVER KERBEROS PRIMARY SERVER and the value… |
| 1.3.6.1.4.1.33.10.8.6 | ScalarkerbServerName2 | read-write | mandatory | The Domain name of the Kerberos server to try when the system verifys a Kerberos ID and cannot reach the Kerberos primary server. Corresponds directly to SERVE… |
| 1.3.6.1.4.1.33.10.8.7 | ScalarkerbInsecureLogins | read-only | mandatory | The number of user logins on ports for which Kerberos user verification is not enabled. Corresponds directly to the value labeled 'Logins without Kerberos:' in… |
| 1.3.6.1.4.1.33.10.8.8 | ScalarkerbSecureLogins | read-only | mandatory | The number of successful user logins on ports for which Kerberos user verification is enabled. Corresponds directly to the value labeled 'Successful Logins:' i… |
| 1.3.6.1.4.1.33.10.8.9 | ScalarkerbSecureLoginsFailed | read-only | mandatory | The number of verification failures due to incorrect ID or password for attempted user logins on ports for which Kerberos user verification is enabled. Corresp… |
| 1.3.6.1.4.1.33.10.8.10 | ScalarkerbPasswordChangeFailed | read-only | mandatory | The number of user failures to change their Kerberos password due to invalid old password or new password verification. Corresponds directly to the value label… |
| 1.3.6.1.4.1.33.10.8.11 | ScalarkerbError | read-only | mandatory | The error number of the most recent Kerberos-related failure. Corresponds directly to the value labeled 'Last Kerberos Error:' in the SERVER KERBEROS display. … |
| 1.3.6.1.4.1.33.10.8.12 | ScalarkerbErrorTime | read-only | mandatory | The date and time that kerbError was last updated. Corresponds directly to the value labeled 'Occurred:' in the SERVER KERBEROS display. |
| 1.3.6.1.4.1.33.10.8.13 | ScalarkerbMasterAccess | read-only | mandatory | The number of times the system successfully accessed the Kerberos master host. Corresponds directly to the value labeled 'Attempts to access:', 'Master', and '… |
| 1.3.6.1.4.1.33.10.8.14 | ScalarkerbMasterAccessFailed | read-only | mandatory | The number of times the system failed access to the Kerberos master host. Corresponds directly to the value labeled 'Attempts to access:', 'Master', and 'Unsuc… |
| 1.3.6.1.4.1.33.10.8.15 | ScalarkerbServerAccess1 | read-only | mandatory | The number of times the system successfully accessed the Kerberos primary server. Corresponds directly to the value labeled 'Attempts to access:', 'Server1', a… |
| 1.3.6.1.4.1.33.10.8.16 | ScalarkerbServerAccessFailed1 | read-only | mandatory | The number of times the system failed access to the Kerberos primary server. Corresponds directly to the value labeled 'Attempts to access:', 'Server1', and 'U… |
| 1.3.6.1.4.1.33.10.8.17 | ScalarkerbServerAccess2 | read-only | mandatory | The number of times the system successfully accessed the Kerberos secondary server. Corresponds directly to the value labeled 'Attempts to access:', 'Server2',… |
| 1.3.6.1.4.1.33.10.8.18 | ScalarkerbServerAccessFailed2 | read-only | mandatory | The number of times the system failed access to the Kerberos secondary server. Corresponds directly to the value labeled 'Attempts to access:', 'Server2', and … |
| 1.3.6.1.4.1.33.10.8.19 | TablekerbPortTable | not-accessible | mandatory | A list of Kerberos character port entries. |
| 1.3.6.1.4.1.33.10.8.19.1 | RowkerbPortEntry | not-accessible | mandatory | Parameter values for a Kerberos port. |
| 1.3.6.1.4.1.33.10.8.19.1.1 | ColumnkerbPortIndex | read-only | mandatory | An index value that uniquely identifies a port could relate to Kerberos. The port identified by a particular value of this index is the same port as identified… |
| 1.3.6.1.4.1.33.10.8.19.1.2 | ColumnkerbPortStatus | read-write | mandatory | A control indicating the level of Kerberos operation on the port. Corresponds directly to PORT KERBEROS and the value 'Kerberos' following the label 'Enabled C… |
| 1.3.6.1.4.1.33.10.9 | NodeportSecurity | |||
| 1.3.6.1.4.1.33.10.9.1 | ScalarpsEntryNumber | read-only | mandatory | The number of security entries in this system's port security table with psEntryStatus of 'valid'. |
| 1.3.6.1.4.1.33.10.9.2 | ScalarpsEntryNumberLimit | read-only | mandatory | The maximum number of security entries in this system's port security table. |
| 1.3.6.1.4.1.33.10.9.3 | ScalarpsEntryInvalidIndex | read-only | mandatory | A value of psEntryIndex for an entry that has psEntryStatus of 'invalid'. A management station may choose this value when adding a new entry. Collisions betwee… |
| 1.3.6.1.4.1.33.10.9.4 | TablepsPortTable | not-accessible | mandatory | A list of port security character port entries. |
| 1.3.6.1.4.1.33.10.9.4.1 | RowpsPortEntry | not-accessible | mandatory | Port security parameter values for a port. |
| 1.3.6.1.4.1.33.10.9.4.1.1 | ColumnpsPortIndex | read-only | mandatory | An index value that uniquely identifies a port for security purposes. The port identified by a particular value of this index is the same port as identified by… |
| 1.3.6.1.4.1.33.10.9.4.1.2 | ColumnpsPortDefaultInboundAccess | read-write | mandatory | The default access to the port for incoming TCP connections. Corresponds directly to PORT INTERNET SECURITY DEFAULT INBOUND and the value labeled 'Inbound Defa… |
| 1.3.6.1.4.1.33.10.9.4.1.3 | ColumnpsPortDefaultOutboundAccess | read-write | mandatory | The default access to the port for outgoing TCP connections. Corresponds directly to PORT INTERNET SECURITY DEFAULT OUTBOUND and the value labeled 'Outbound De… |
| 1.3.6.1.4.1.33.10.9.5 | TablepsTable | not-accessible | mandatory | A list of port security entries. |
| 1.3.6.1.4.1.33.10.9.5.1 | RowpsEntry | not-accessible | mandatory | Port security parameter values for an entry for a port. |
| 1.3.6.1.4.1.33.10.9.5.1.1 | ColumnpsEntryIndex | read-only | mandatory | A small, numeric distinguisher for port security entries. When adding a new entry, the client should specify an unused value, such as psEntryInvalidIndex. Corr… |
| 1.3.6.1.4.1.33.10.9.5.1.2 | ColumnpsEntryStatus | read-write | mandatory | Status of this entry. Setting the value to 'invalid' invalidates the entry, corresponding directly to the CLEAR INTERNET SECURITY command. It is an implementat… |
| 1.3.6.1.4.1.33.10.9.5.1.3 | ColumnpsEntryAddress | read-write | mandatory | The IP address to which the entry pertains. Corresponds directly to the PORT INTERNET SECURITY internet address and the value labeled 'Internet Address' in the… |
| 1.3.6.1.4.1.33.10.9.5.1.4 | ColumnpsEntryMask | read-write | mandatory | The mask applied to psEntryAddress when making a security check based on this entry. Corresponds directly to PORT INTERNET SECURITY MASK and the value labeled … |
| 1.3.6.1.4.1.33.10.9.5.1.5 | ColumnpsEntryAccess | read-write | mandatory | The access to the port for TCP connections when making a security check based on this entry. Corresponds directly to PORT INTERNET SECURITY ALLOW or DENY and t… |
| 1.3.6.1.4.1.33.10.9.5.1.6 | ColumnpsEntryDirection | read-write | mandatory | The direction of TCP connections to which this entry applies. Corresponds directly to PORT INTERNET SECURITY INBOUND or OUTBOUND and the value labeled 'Directi… |
| 1.3.6.1.4.1.33.10.9.5.1.7 | ColumnpsEntryPortMap | read-write | mandatory | The list of character ports to which this entry applies. The OCTET STRING contains a bitmap, with one bit for each port, and enough octets for all the ports on… |
| 1.3.6.1.4.1.33.10.10 | Nodexremote | |||
| 1.3.6.1.4.1.33.10.10.1 | ScalarxremoteServerName1 | read-write | mandatory | The Domain name of the first XREMOTE font server to try for downloading fonts. Corresponds directly to SERVER XREMOTE PRIMARY SERVER and the value labeled 'Xre… |
| 1.3.6.1.4.1.33.10.10.2 | ScalarxremoteServerName2 | read-write | mandatory | The Domain name of the XREMOTE font server to try for downloading fonts and the primary font server does not respond. Corresponds directly to SERVER XREMOTE SE… |
| 1.3.6.1.4.1.33.10.10.3 | ScalarxremoteServerAccess1 | read-only | mandatory | The number of times the system successfully accessed the XREMOTE primary font server. Corresponds directly to the value labeled 'Attempts to access:', 'Server1… |
| 1.3.6.1.4.1.33.10.10.4 | ScalarxremoteServerAccessFailed1 | read-only | mandatory | The number of times the system failed access to the XREMOTE primary font server. Corresponds directly to the value labeled 'Attempts to access:', 'Server1', an… |
| 1.3.6.1.4.1.33.10.10.5 | ScalarxremoteServerAccess2 | read-only | mandatory | The number of times the system successfully accessed the XREMOTE secondary font server. Corresponds directly to the value labeled 'Attempts to access:', 'Serve… |
| 1.3.6.1.4.1.33.10.10.6 | ScalarxremoteServerAccessFailed2 | read-only | mandatory | The number of times the system failed access to the XREMOTE secondary font server. Corresponds directly to the value labeled 'Attempts to access:', 'Server2', … |
| 1.3.6.1.4.1.33.10.10.7 | ScalarxremoteSessions | read-only | mandatory | The number of connected XREMOTE sessions. Corresponds directly to the value labeled 'Current Number of Xremote Sessions:' in the SERVER XREMOTE display. |
| 1.3.6.1.4.1.33.10.10.8 | TablexremotePortTable | not-accessible | mandatory | A list of XREMOTE character port entries. |
| 1.3.6.1.4.1.33.10.10.8.1 | RowxremotePortEntry | not-accessible | mandatory | XREMOTE parameter values for a port. |
| 1.3.6.1.4.1.33.10.10.8.1.1 | ColumnxremotePortIndex | read-only | mandatory | An index value that uniquely identifies a port. The port identified by a particular value of this index is the same port as identified by charPortIndex in the … |
| 1.3.6.1.4.1.33.10.10.8.1.2 | ColumnxremotePortXremote | read-write | mandatory | Control for use of XREMOTE on the port. Corresponds directly to PORT XREMOTE and the presence of the label 'Xremote' following the label 'Enabled Characteristi… |
| 1.3.6.1.4.1.33.10.10.8.1.3 | ColumnxremotePortXdmQuery | read-write | mandatory | The type of query message issued by a port when searching for an X Display Manager (XDM). Corresponds directly to the PORT XDM QUERY and the 'XDM Query:' in th… |
| 1.3.6.1.4.1.33.10.10.8.1.4 | ColumnxremotePortXdmHost | read-write | mandatory | The Domain name or Internet address of the X Display Manager (XDM) for a port. Corresponds directly to the PORT XDM HOST and the 'XDM Host:' in the PORT ALTERN… |
| 1.3.6.1.4.1.33.10.10.9 | ScalarxremoteServerClients | read-only | mandatory | The number of active X clients. Corresponds directly to the value labeled 'Current Number of XClients:' in the SERVER XREMOTE display. |
| 1.3.6.1.4.1.33.10.11 | Noderotary | |||
| 1.3.6.1.4.1.33.10.11.1 | ScalarrotaryNumber | read-only | mandatory | The number of entries in the Rotary table. |
| 1.3.6.1.4.1.33.10.11.2 | TablerotaryTable | not-accessible | mandatory | A list of rotary entries. |
| 1.3.6.1.4.1.33.10.11.2.1 | RowrotaryEntry | not-accessible | mandatory | Parameter values for a rotary. |
| 1.3.6.1.4.1.33.10.11.2.1.1 | ColumnrotaryAddress | read-write | mandatory | The internet address to be recognized as a rotary. Corresponds directly to the ip-address portion of SERVER INTERNET ROTARY and the value labeled 'Internet Add… |
| 1.3.6.1.4.1.33.10.11.2.1.2 | ColumnrotaryStatus | read-write | mandatory | Status of this entry. Setting the value to 'invalid' invalidates the entry, corresponding directly to the CLEAR SERVER INTERNET ROTARY command. It is an implem… |
| 1.3.6.1.4.1.33.10.11.2.1.3 | ColumnrotaryPortMap | read-write | mandatory | The list of character ports that compose the rotary. The OCTET STRING contains a bitmap, with one bit for each port, and enough octets for all the ports on the… |
| 1.3.6.1.4.1.33.10.12 | NodexEgp | |||
| 1.3.6.1.4.1.33.10.12.1 | ScalaregpRouting | read-write | mandatory | Control for EGP routing services. |
| 1.3.6.1.4.1.33.10.12.2 | ScalaregpStatus | read-only | mandatory | Status of the EGP routing services indicating why it is not running. |
| 1.3.6.1.4.1.33.10.12.3 | TableegpNbrTable | not-accessible | mandatory | The EGP neighbor table. |
| 1.3.6.1.4.1.33.10.12.3.1 | RowegpNbrEntry | not-accessible | mandatory | Information about this entity's relationship with a particular EGP neighbor. |
| 1.3.6.1.4.1.33.10.12.3.1.1 | ColumnegpNbrAddr | read-only | mandatory | The IP address of this entry's EGP neighbor. |
| 1.3.6.1.4.1.33.10.12.3.1.2 | ColumnegpNbrIntervalDead | read-write | mandatory | The interval upon entering the cease or idle state before automatically assuming a Start Event has occured. If a neighbor does not respond within 5 minutes, a … |
| 1.3.6.1.4.1.33.10.13 | Nodexospf | |||
| 1.3.6.1.4.1.33.10.13.1 | ScalarospfAutoConfigure | read-write | mandatory | Control whether OSPF will automatically configure itself. |
| 1.3.6.1.4.1.33.10.13.2 | ScalarospfStatus | read-only | mandatory | Status of the OSPF routing services indicating why it is not running. |
| 1.3.6.1.4.1.33.10.13.3 | TableospfIfMtrcTbl | not-accessible | mandatory | The TOS metrics for a non-virtual interface identified by the interface index. |
| 1.3.6.1.4.1.33.10.13.3.1 | RowospfIfMtrcEntry | not-accessible | mandatory | A particular TOS metric for a non-virtual interface identified by the interface index. |
| 1.3.6.1.4.1.33.10.13.3.1.1 | ColumnospfIfMtrcIpAddress | read-only | mandatory | Same as ospfIfMetricIpAddress in OSPF MIB, the IP address of this OSPF interface. |
| 1.3.6.1.4.1.33.10.13.3.1.2 | ColumnospfIfMtrcAddressLessIf | read-only | mandatory | Same as ospfIfMetricAddressLessIf in OSPF MIB, for the purpose of easing the instancing of addressed and addressless interfaces. This variable takes the value … |
| 1.3.6.1.4.1.33.10.13.3.1.3 | ColumnospfIfMtrcTos | read-only | mandatory | Same as ospfIfMetricIpAddress in OSPF MIB, the type of service metric being referenced. |
| 1.3.6.1.4.1.33.10.13.3.1.4 | ColumnospfIfMtrcCostActual | read-only | mandatory | The actual cost of the metric in case it was set to auto. |
| 1.3.6.1.4.1.33.10.14 | NoderouterIp | |||
| 1.3.6.1.4.1.33.10.14.1 | TableipAddrExtensions | not-accessible | mandatory | Table of additional fields indexed by local IP address. An entry in this table is created or deleted when an entry in the ipAddrTable is created or deleted. |
| 1.3.6.1.4.1.33.10.14.1.1 | RowipAdEntExt | not-accessible | mandatory | A particular entry. |
| 1.3.6.1.4.1.33.10.14.1.1.1 | ColumnipAdEntExtAddress | read-only | mandatory | Same as ipAdEntAddr, a local address representing a network connection. |
| 1.3.6.1.4.1.33.10.14.1.1.2 | ColumnipAdEntExtProxyArp | read-write | mandatory | Controls whether proxy ARP is active for this local address. |
| 1.3.6.1.4.1.33.10.14.1.1.3 | ColumnipAdEntExtRip | read-write | mandatory | Controls whether RIP as a router discovery protocol is active for this local address. |
| 1.3.6.1.4.1.33.10.15 | NoderouterUdp | |||
| 1.3.6.1.4.1.33.10.15.1 | TableudpBcstServerTbl | not-accessible | mandatory | Table of servers to whom UDP broadcast messages will be forwarded. |
| 1.3.6.1.4.1.33.10.15.1.1 | RowudpBcstServerEntry | not-accessible | mandatory | A particular entry. |
| 1.3.6.1.4.1.33.10.15.1.1.1 | ColumnudpBcstServerAddress | read-write | mandatory | Internet address of the server. |
| 1.3.6.1.4.1.33.10.15.1.1.2 | ColumnudpBcstServerStatus | read-write | mandatory | The status of the server. Set to 'invalid' to remove the entry. |
| 1.3.6.1.4.1.33.10.15.2 | TableudpBcstPortTbl | not-accessible | mandatory | Table of incoming UDP destination port numbers for which UDP broadcasts will be forwarded. |
| 1.3.6.1.4.1.33.10.15.2.1 | RowudpBcstPortEntry | not-accessible | mandatory | A particular entry. |
| 1.3.6.1.4.1.33.10.15.2.1.1 | ColumnudpBcstPort | read-write | mandatory | The incoming destination UDP port number. |
| 1.3.6.1.4.1.33.10.15.2.1.2 | ColumnudpBcstPortStatus | read-write | mandatory | The status of broadcast forwarding for the port. Set to 'invalid' to remove the entry. |
| 1.3.6.1.4.1.33.10.16 | NoderouterPolicy | |||
| 1.3.6.1.4.1.33.10.16.1 | Nodeimport | |||
| 1.3.6.1.4.1.33.10.16.1.1 | TableimpEgpTable | not-accessible | mandatory | The EGP import table. |
| 1.3.6.1.4.1.33.10.16.1.1.1 | RowimpEgpRule | not-accessible | mandatory | An EGP import rule. Each rule is keyed by the Autonomous System of the EGP neighbor and the IP network of the route learned from the neighbor. The AS can be se… |
| 1.3.6.1.4.1.33.10.16.1.1.1.1 | ColumnimpEgpRuleAs | read-only | mandatory | The Autonomous System of the neighbor. The value 65535 is a wild card matching any AS number. |
| 1.3.6.1.4.1.33.10.16.1.1.1.2 | ColumnimpEgpRuleNetwork | read-only | mandatory | The IP network learned from the neighbor. The value 255.255.255.255 is a wild card matching any network. |
| 1.3.6.1.4.1.33.10.16.1.1.1.3 | ColumnimpEgpRuleAction | read-write | mandatory | Control whether the route is learned or discarded. |
| 1.3.6.1.4.1.33.10.16.1.1.1.4 | ColumnimpEgpRulePreference | read-write | mandatory | Preference to be stored with the route. The lower preference is preferred. |
| 1.3.6.1.4.1.33.10.16.1.1.1.5 | ColumnimpEgpRuleType | read-write | mandatory | Type to be stored with the route. The type is based on the OSPF external type and used to help compare metrics. Type 1 is preferred over type 2. |
| 1.3.6.1.4.1.33.10.16.1.1.1.6 | ColumnimpEgpRuleMetricAction | read-write | mandatory | How to apply the impEgpRuleMetric field to the metric learned with the route before storing it in the routing table. |
| 1.3.6.1.4.1.33.10.16.1.1.1.7 | ColumnimpEgpRuleMetric | read-write | mandatory | Metric value to be applied to the metric learned learned with the route before storing it in the routing table. |
| 1.3.6.1.4.1.33.10.16.1.1.1.8 | ColumnimpEgpRuleStatus | read-write | mandatory | The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values. |
| 1.3.6.1.4.1.33.10.16.1.2 | TableimpOspfTable | not-accessible | mandatory | The OSPF import table. |
| 1.3.6.1.4.1.33.10.16.1.2.1 | RowimpOspfRule | not-accessible | mandatory | An OSPF import rule. Each rule is keyed by the IP network of the route and the AS from which it was learned. The Ip network and the AS can both be set to a wil… |
| 1.3.6.1.4.1.33.10.16.1.2.1.1 | ColumnimpOspfRuleNetwork | read-only | mandatory | The IP network of the route. The value 255.255.255.255 is a wild card matching any network. |
| 1.3.6.1.4.1.33.10.16.1.2.1.2 | ColumnimpOspfRulePreference | read-write | mandatory | Preference to be stored with the route. The lower preference is preferred. |
| 1.3.6.1.4.1.33.10.16.1.2.1.3 | ColumnimpOspfRuleStatus | read-write | mandatory | The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values. |
| 1.3.6.1.4.1.33.10.16.2 | Nodeexport | |||
| 1.3.6.1.4.1.33.10.16.2.1 | TableexpEgpToEgpTable | not-accessible | mandatory | The EGP to EGP export table. |
| 1.3.6.1.4.1.33.10.16.2.1.1 | RowexpEgpToEgpRule | not-accessible | mandatory | An EGP to EGP export rule. Each rule is keyed by the Autonomous System of the EGP neighbor, the IP network of the EGP route in the routing table, and the Auton… |
| 1.3.6.1.4.1.33.10.16.2.1.1.1 | ColumnexpEgpToEgpRuleToAs | read-only | mandatory | The Autonomous System of the neighbor. The value 65535 is a wild card matching any AS number. |
| 1.3.6.1.4.1.33.10.16.2.1.1.2 | ColumnexpEgpToEgpRuleNetwork | read-only | mandatory | The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network. |
| 1.3.6.1.4.1.33.10.16.2.1.1.3 | ColumnexpEgpToEgpRuleFromAs | read-only | mandatory | The Autonomous System of the route in the route table. The value 65535 is a wild card matching any AS number. |
| 1.3.6.1.4.1.33.10.16.2.1.1.4 | ColumnexpEgpToEgpRuleAction | read-write | mandatory | Control whether the route is advertised or not. |
| 1.3.6.1.4.1.33.10.16.2.1.1.5 | ColumnexpEgpToEgpRuleMetricAction | read-write | mandatory | How to apply the expEgpToEgpRuleMetric field to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.1.1.6 | ColumnexpEgpToEgpRuleMetric | read-write | mandatory | Metric value to be applied to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.1.1.7 | ColumnexpEgpToEgpRuleStatus | read-write | mandatory | The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values. |
| 1.3.6.1.4.1.33.10.16.2.2 | TableexpOspfToEgpTable | not-accessible | mandatory | The OSPF to EGP export table. |
| 1.3.6.1.4.1.33.10.16.2.2.1 | RowexpOspfToEgpRule | not-accessible | mandatory | An OSPF to EGP export rule. Each rule is keyed by the Autonomous System of the EGP neighbor, the IP network of the OSPF route in the routing table, and the Aut… |
| 1.3.6.1.4.1.33.10.16.2.2.1.1 | ColumnexpOspfToEgpRuleToAs | read-only | mandatory | The Autonomous System of the neighbor. The value 65535 is a wild card matching any AS number. |
| 1.3.6.1.4.1.33.10.16.2.2.1.2 | ColumnexpOspfToEgpRuleNetwork | read-only | mandatory | The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network. |
| 1.3.6.1.4.1.33.10.16.2.2.1.3 | ColumnexpOspfToEgpRuleFromAs | read-only | mandatory | The Autonomous System of the route in the route table. Local indicates that the route was not an external OSPF route. The value 65535 is a wild card matching a… |
| 1.3.6.1.4.1.33.10.16.2.2.1.4 | ColumnexpOspfToEgpRuleAction | read-write | mandatory | Control whether the route is advertised or not. |
| 1.3.6.1.4.1.33.10.16.2.2.1.5 | ColumnexpOspfToEgpRuleMetricAction | read-write | mandatory | How to apply the expOspfToEgpRuleMetric field to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.2.1.6 | ColumnexpOspfToEgpRuleMetric | read-write | mandatory | Metric value to be applied to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.2.1.7 | ColumnexpOspfToEgpRuleStatus | read-write | mandatory | The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values. |
| 1.3.6.1.4.1.33.10.16.2.3 | TableexpStaticToEgpTable | not-accessible | mandatory | The Static to EGP export table. |
| 1.3.6.1.4.1.33.10.16.2.3.1 | RowexpStaticToEgpRule | not-accessible | mandatory | An Static to EGP export rule. Each rule is keyed by the Autonomous System of the EGP neighbor and the IP network of the Static route in the routing table. The … |
| 1.3.6.1.4.1.33.10.16.2.3.1.1 | ColumnexpStaticToEgpRuleToAs | read-only | mandatory | The Autonomous System of the neighbor. The value 65535 is a wild card matching any AS number. |
| 1.3.6.1.4.1.33.10.16.2.3.1.2 | ColumnexpStaticToEgpRuleNetwork | read-only | mandatory | The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network. |
| 1.3.6.1.4.1.33.10.16.2.3.1.3 | ColumnexpStaticToEgpRuleAction | read-write | mandatory | Control whether the route is advertised or not. |
| 1.3.6.1.4.1.33.10.16.2.3.1.4 | ColumnexpStaticToEgpRuleMetricAction | read-write | mandatory | How to apply the expStaticToEgpRuleMetric field to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.3.1.5 | ColumnexpStaticToEgpRuleMetric | read-write | mandatory | Metric value to be applied to the metric in the route table entry before the route is advertised. |
| 1.3.6.1.4.1.33.10.16.2.3.1.6 | ColumnexpStaticToEgpRuleStatus | read-write | mandatory | The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values. |
| 1.3.6.1.4.1.33.10.16.2.4 | TableexpEgpToOspfTable | not-accessible | mandatory | The EGP to OSPF export table. |
| 1.3.6.1.4.1.33.10.16.2.4.1 | RowexpEgpToOspfRule | not-accessible | mandatory | An EGP to OSPF export rule. Each rule is keyed by the IP network of the EGP route in the routing table, and the Autonomous System from which the route was lear… |
| 1.3.6.1.4.1.33.10.16.2.4.1.1 | ColumnexpEgpToOspfRuleNetwork | read-only | mandatory | The IP network of the route in the route table. The value 255.255.255.255 is a wild card matching any network. |
| 1.3.6.1.4.1.33.10.16.2.4.1.2 | ColumnexpEgpToOspfRuleFromAs | read-only | mandatory | The Autonomous System of the route in the route table. The value 65535 is a wild card matching any AS number. |
| 1.3.6.1.4.1.33.10.16.2.4.1.3 | ColumnexpEgpToOspfRuleAction | read-write | mandatory | Control whether the route is advertised or not. |
| 1.3.6.1.4.1.33.10.16.2.4.1.4 | ColumnexpEgpToOspfRuleStatus | read-write | mandatory | The status of the rule. Set to 'invalid' to remove the rule. If the all wild card rule is removed, it is automatically readded with default values. |