ZTE-AN-ACL-MIB
141 objects
This MIB defines managed objects of ZTE access control list.
Imported Objects
| IF-MIB | ifIndex |
| INET-ADDRESS-MIB | InetAddress InetAddressPrefixLength InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DateAndTime DisplayString MacAddress RowStatus TEXTUAL-CONVENTION |
| ZTE-AN-IF-MIB | zxAnSubIfIndex |
| ZTE-AN-SMI | zxAnServiceSecurity |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3902.1082.70.15 | IdentityzxAnAclMib | This MIB defines managed objects of ZTE access control list. | ||
| 1.3.6.1.4.1.3902.1082.70.15.1 | NodezxAnAclGlobalObjects | |||
| 1.3.6.1.4.1.3902.1082.70.15.1.1 | ScalarzxAnAclCapabilities | read-only | current | The ACL capabilities for this equipment. The bit value 1 means the function represented by this bit is supported. tagTpid(0): value 1 means supporting zxAnAclH… |
| 1.3.6.1.4.1.3902.1082.70.15.2 | NodezxAnAclObjects | |||
| 1.3.6.1.4.1.3902.1082.70.15.2.2 | NodezxAnAclBaseObjects | |||
| 1.3.6.1.4.1.3902.1082.70.15.2.2.2 | TablezxAnAclTable | not-accessible | current | This table represents the ACL related parameters. |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.2.1 | RowzxAnAclEntry | not-accessible | current | An entry in zxAnAclTable. The multi-variables binding rule should be complied with when a manager creates an entry. According to this rule, all the related mib… |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.2.1.1 | ColumnzxAnAclNumber | not-accessible | current | The number of an ACL. When unifiedTypeAcl(2) bit of zxAnAclCapabilities is 0: range 1-99 - standard ACL. range 100-199 - extended ACL. range 200-299 - link ACL… |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.2.1.2 | ColumnzxAnAclName | read-create | current | The name of an ACL. The first element (excluding plus & minus) in an ACL name should not be a number. You can't make the same name to different ACLs. It's not … |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.2.1.50 | ColumnzxAnAclRowStatus | read-create | current | The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a man… |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.3 | TablezxAnAclStandardRuleTable | not-accessible | current | Acl standard rule table. Provide acl standard rule configuration. |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.3.1 | RowzxAnAclStandardRuleEntry | not-accessible | current | An entry in zxAnAclStandardRuleTable. The multi-variables binding rule should be complied with when a manager creates an entry. According to this rule, all the… |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.3.1.1 | ColumnzxAnAclStdAclNumber | not-accessible | current | The number of a standard Acl. |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.3.1.2 | ColumnzxAnAclStdRuleId | not-accessible | current | The index of a rule within a standard Acl. |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.3.1.3 | ColumnzxAnAclStdRuleAccessCtrl | read-create | current | Specify packets to be rejected or to be forwarded. |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.3.1.4 | ColumnzxAnAclStdRuleSrcIpType | read-create | current | The type of IP address used by this rule entry. |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.3.1.5 | ColumnzxAnAclStdRuleSrcIp | read-create | current | The source IP address to be matched for this rule. A value of zero causes all source address to match. The object value has to be consistent with the type spec… |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.3.1.6 | ColumnzxAnAclStdRuleSrcIpMask | read-create | current | This is the wildcard mask for the zxAnAclStdRuleSrcIp bits that must match. 0 bits in the mask indicate the corresponding bits in the zxAnAclStdRuleSrcIp must … |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.3.1.45 | ColumnzxAnAclStdRuleTimeRangeName | read-create | current | Name of the time range. Empty string means all the time the rule is valid. |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.3.1.50 | ColumnzxAnAclStdRuleRowStatus | read-create | current | The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a man… |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.6 | TablezxAnAclHybridRuleTable | not-accessible | current | Acl hybrid rule table. Provide acl hybrid rule configuration. |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.6.1 | RowzxAnAclHybridRuleEntry | not-accessible | current | An entry in zxAnAclHybridRuleTable. The multi-variables binding rule should be complied with when a manager creates an entry. According to this rule, all the r… |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.6.1.1 | ColumnzxAnAclHybridAclNumber | not-accessible | current | The number of a hybrid Acl. |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.6.1.2 | ColumnzxAnAclHybridRuleId | not-accessible | current | The index of a rule within a hybrid Acl |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.6.1.3 | ColumnzxAnAclHybridRuleAccessCtrl | read-create | current | Specify packets to be rejected or to be forwarded. |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.6.1.4 | ColumnzxAnAclHybridRuleSrcIpType | read-create | current | The type of source IP address used by this rule entry. |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.6.1.5 | ColumnzxAnAclHybridRuleSrcIp | read-create | current | The source IP address to be matched against for this rule. A zero value of this variable and a 0xFFFFFF value of variable zxAnAclHybridRuleSrcIpMask causes all… |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.6.1.6 | ColumnzxAnAclHybridRuleSrcIpMask | read-create | current | This is the wildcard mask for the zxAnAclStdRuleSrcIp bits that must match.0 bits in the mask indicate the corresponding bits in the zxAnAclHybridRuleSrcIp mus… |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.6.1.8 | ColumnzxAnAclHybridRuleDestIpType | read-create | current | The type of destination IP address used by this rule entry. |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.6.1.9 | ColumnzxAnAclHybridRuleDestIp | read-create | current | The destination IP address to be matched against for this rule. A zero value of this variable and a 0xFFFFFF value of variable zxAnAclHybridRuleDestIpMask caus… |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.6.1.10 | ColumnzxAnAclHybridRuleDestIpMask | read-create | current | This is the wildcard mask for the zxAnAclHybridRuleDestIp bits that must match. 0 bits in the mask indicate the corresponding bits in the zxAnAclHybridRuleDest… |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.6.1.12 | ColumnzxAnAclHybridRuleIpProto | read-create | current | The protocol number field in the IP header used to indicate the higher layer protocol as specified in RFC 1700.A value of '0xFF' matches every IP packet. For e… |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.6.1.13 | ColumnzxAnAclHybridRuleEthProto | read-create | current | This 16-bit number indicates the matched Ethernet type. 0xFFFF means any Ethernet type will be matched. |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.6.1.14 | ColumnzxAnAclHybridRuleSrcPortOper | read-create | current | Indicates how a packet's source TCP/UDP port number is to be compared. If the zxAnAclHybridRuleIpProto object in the same row does not indicate TCP or UDP, thi… |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.6.1.15 | ColumnzxAnAclHybridRuleStartSrcPort | read-create | current | The source port number of the TCP or UDP protocol. If the zxAnAclHybridRuleSrcPortOper object in the same row is range(5), this object will be the starting por… |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.6.1.16 | ColumnzxAnAclHybridRuleEndSrcPort | read-create | current | The source port number of the TCP or UDP protocol. If the zxAnAclHybridRuleSrcPortOper object in the same row is range(5), this object will be the ending port … |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.6.1.17 | ColumnzxAnAclHybridRuleDestPortOper | read-create | current | Indicates how a packet's destination TCP/UDP port number is to be compared. If the zxAnAclHybridRuleIpProto object in the same row does not indicate TCP or UDP… |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.6.1.18 | ColumnzxAnAclHybridRuleStartDestPort | read-create | current | The destination port number of the TCP or UDP protocol. If the zxAnAclHybridRuleDestPortOper object in the same row is range(5), this object will be the starti… |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.6.1.19 | ColumnzxAnAclHybridRuleEndDestPort | read-create | current | The destination port number of the TCP or UDP protocol. If the zxAnAclHybridRuleDestPortOper object in the same row is range(5), this object will be the ending… |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.6.1.20 | ColumnzxAnAclHybridRulePrecedence | read-create | current | Specifies the IP precedence value to be matched against. Packets can be matched the IP precedence value from 0 to 7. This object can't be configured simultaneo… |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.6.1.21 | ColumnzxAnAclHybridRuleTos | read-create | current | Specifies the Tos value to be matched against. Packets can be matched the Tos value from 0 to 15. This object can't be configured simultaneously with zxAnAclHy… |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.6.1.22 | ColumnzxAnAclHybridRuleDscp | read-create | current | Specifies the Dscp value to be matched against. Packets can be matched the DSCP level from 0 to 63. This object can't be configured simultaneously with zxAnAcl… |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.6.1.25 | ColumnzxAnAclHybridRuleStagCos | read-create | current | Indicates the packet Cos value to be matched. If there are two tags in the packets, this object will be the Cos value in outer tag.'0xFF' indicates no configur… |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.6.1.26 | ColumnzxAnAclHybridRuleSVid | read-create | current | Indicates the packet VLAN number to be matched. If there are two tags in the packets, this object will be the VLAN number in outer tag.'0xFFFF' indicates no co… |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.6.1.27 | ColumnzxAnAclHybridRuleCtagCos | read-create | current | Indicates the packet Cos value to be matched. If there are two tags in the packets, this object will be the Cos value in inner tag. The value of this object is… |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.6.1.28 | ColumnzxAnAclHybridRuleCVid | read-create | current | Indicates the packet VLAN number to be matched. If there are two tags in the packets, this object will be the VLAN number in inner tag. The value of this objec… |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.6.1.29 | ColumnzxAnAclHybridRuleSrcMac | read-create | current | The source MAC address to be matched against for this rule. A 0 value of this variable and a 0xFFFFFFFFFFFF value of variable zxAnAclHybridRuleSrcMacMask cause… |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.6.1.30 | ColumnzxAnAclHybridRuleSrcMacMask | read-create | current | This is the wildcard mask for the zxAnAclHybridRuleSrcMac bits that must match. 0 bits in the mask indicate the corresponding bits in the zxAnAclHybridRuleSrcM… |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.6.1.31 | ColumnzxAnAclHybridRuleDestMac | read-create | current | The destination MAC address to be matched against for this rule. A 0 value of this variable and a 0xFFFFFFFFFFFF value of variable zxAnAclHybridRuleDestMacMask… |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.6.1.32 | ColumnzxAnAclHybridRuleDestMacMask | read-create | current | This is the wildcard mask for the zxAnAclHybridRuleDestMac bits that must match. 0 bits in the mask indicate the corresponding bits in the zxAnAclHybridRuleDes… |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.6.1.33 | ColumnzxAnAclHybridRuleStagTpid | read-create | current | Specifies the value which will be matched 802.1q TPID field. If there are two vlan tags in the packet, this object will be matched the field which in outer tag… |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.6.1.34 | ColumnzxAnAclHybridRuleCtagTpid | read-create | current | Specifies the value which will be matched the inner TPID field when there are two vlan tags. Value '0' indicates no configure. |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.6.1.35 | ColumnzxAnAclHybridRuleItagTpid | read-create | current | Specifies the value which will be matched the 802.1ah I-Tag TPID field. Value '0' indicates no configure. |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.6.1.36 | ColumnzxAnAclHybridRuleIsid | read-create | current | Specifies the value which will be matched the 802.1ah I-SID field. Value '0x7FFFFFFF' indicates no configure. |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.6.1.45 | ColumnzxAnAclHybridRuleTimeRangeName | read-create | current | Name of the time range. Empty string means all the time the rule is valid. |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.6.1.50 | ColumnzxAnAclHybridRuleRowStatus | read-create | current | The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a man… |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.7 | TablezxAnAclIpv6HybridRuleTable | not-accessible | current | ACL IPv6 rule table. Provide ACL hybrid rule configuration. |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.7.1 | RowzxAnAclIpv6HybridRuleEntry | not-accessible | current | An entry in zxAnAclIpv6HybridRuleEntry. The multi-variables binding rule should be complied with when a manager creates an entry. According to this rule, all t… |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.1 | ColumnzxAnAclIpv6HybridAclNumber | not-accessible | current | The number of an IPv6 hybrid ACL. |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.2 | ColumnzxAnAclIpv6HybridRuleId | not-accessible | current | The index of a rule within an IPv6 hybrid ACL. |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.3 | ColumnzxAnAclIpv6HybridAccessCtrl | read-create | current | Specify packets to be rejected or to be forwarded. |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.4 | ColumnzxAnAclIpv6HybridSrcIpType | read-create | current | The type of source IP address used by this rule entry. |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.5 | ColumnzxAnAclIpv6HybridSrcIp | read-create | current | The source IP address to be matched against for this rule. The object value has to be consistent with the type specified in zxAnAclIpv6HybridSrcIpType. |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.6 | ColumnzxAnAclIpv6HybridSrcIpMask | read-create | current | This is the wildcard mask for the zxAnAclIpv6HybridSrcIp bits that must match.0 bits in the mask indicate the corresponding bits in the zxAnAclIpv6HybridSrcIp … |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.7 | ColumnzxAnAclIpv6HybridSrcIpPfxLen | read-create | current | Source IP address prefix length. Only valid when zxAnAclIpv6HybridSrcIpType is ipv6. |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.8 | ColumnzxAnAclIpv6HybridDestIpType | read-create | current | The type of destination IP address used by this rule entry. |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.9 | ColumnzxAnAclIpv6HybridDestIp | read-create | current | The destination IP address to be matched against for this rule. The object value has to be consistent with the type specified in zxAnAclIpv6HybridDestIpType. |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.10 | ColumnzxAnAclIpv6HybridDestIpMask | read-create | current | This is the wildcard mask for the zxAnAclIpv6HybridDestIpMask bits that must match. 0 bits in the mask indicate the corresponding bits in the zxAnAclIpv6Hybrid… |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.11 | ColumnzxAnAclIpv6HybridDestIpPfxLen | read-create | current | Destination IP address prefix length. Only valid when zxAnAclIpv6HybridDestIpType is ipv6. |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.12 | ColumnzxAnAclIpv6HybridIpProto | read-create | current | <0-254> An IP protocol number icmpv6 Internet Control Message Protocol for Ipv6(58) igmp Internet Group Management Protocol (2) ospf Open Shortest Path First P… |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.13 | ColumnzxAnAclIpv6HybridEthProto | read-create | current | 0xHHHH Ethernet protocol number any Any ether protocol type arp Address resolution protocol (2054) ip Internet protocol (2048) |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.14 | ColumnzxAnAclIpv6HybridSrcPortOper | read-create | current | Indicates how a packet's source TCP/UDP port number is to be compared. If the zxAnAclIpv6HybridIpProto object in the same row does not indicate TCP or UDP, thi… |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.15 | ColumnzxAnAclIpv6HybridStartSrcPort | read-create | current | The source port number of the TCP or UDP protocol. If the zxAnAclIpv6HybridSrcPortOper object in the same row is range(5), this object will be the starting por… |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.16 | ColumnzxAnAclIpv6HybridEndSrcPort | read-create | current | The source port number of the TCP or UDP protocol. If the zxAnAclIpv6HybridSrcPortOper object in the same row is range(5), this object will be the ending port … |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.17 | ColumnzxAnAclIpv6HybridDestPortOper | read-create | current | Indicates how a packet's destination TCP/UDP port number is to be compared. If the zxAnAclIpv6HybridIpProto object in the same row does not indicate TCP or UDP… |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.18 | ColumnzxAnAclIpv6HybridStartDestPort | read-create | current | The destination port number of the TCP or UDP protocol. If the zxAnAclIpv6HybridDestPortOper object in the same row is range(5), this object will be the starti… |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.19 | ColumnzxAnAclIpv6HybridEndDestPort | read-create | current | The destination port number of the TCP or UDP protocol. If the zxAnAclIpv6HybridDestPortOper object in the same row is range(5), this object will be the ending… |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.20 | ColumnzxAnAclIpv6HybridPrecedence | read-create | current | Specifies the IP precedence value to be matched against. Packets can be matched the IP precedence value from 0 to 7. This object can't be configured simultaneo… |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.21 | ColumnzxAnAclIpv6HybridTos | read-create | current | Specifies the TOS value to be matched against. Packets can be matched the TOS value from 0 to 15. This object can't be configured simultaneously with zxAnAclIp… |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.22 | ColumnzxAnAclIpv6HybridDscp | read-create | current | Specifies the DSCP value to be matched against. Packets can be matched the DSCP level from 0 to 63. This object can't be configured simultaneously with zxAnAcl… |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.23 | ColumnzxAnAclIpv6HybridStagCos | read-create | current | Indicates the packet CoS value to be matched. If there are two tags in the packets, this object will be the CoS value in outer tag. A value of '0xFF' indicates… |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.24 | ColumnzxAnAclIpv6HybridSVid | read-create | current | Indicates the packet VLAN number to be matched. If there are two tags in the packets, this object will be the VLAN number in outer tag. A value of '0xFFFF' ind… |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.25 | ColumnzxAnAclIpv6HybridCtagCos | read-create | current | Indicates the packet CoS value to be matched. If there are two tags in the packets, this object will be the CoS value in inner tag. The value of this object is… |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.26 | ColumnzxAnAclIpv6HybridCVid | read-create | current | Indicates the packet VLAN number to be matched. If there are two tags in the packets, this object will be the VLAN number in inner tag. The value of this objec… |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.27 | ColumnzxAnAclIpv6HybridSrcMac | read-create | current | The source MAC address to be matched against for this rule. A 0 value of this variable and a 0xFFFFFFFFFFFF value of variable zxAnAclIpv6HybridSrcMacMask indic… |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.28 | ColumnzxAnAclIpv6HybridSrcMacMask | read-create | current | This is the wildcard mask for the zxAnAclIpv6HybridSrcMac bits that must match. 0 bits in the mask indicate the corresponding bits in the zxAnAclIpv6HybridSrcM… |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.29 | ColumnzxAnAclIpv6HybridDestMac | read-create | current | The destination MAC address to be matched against for this rule. A 0 value of this variable and a 0xFFFFFFFFFFFF value of variable zxAnAclIpv6HybridDestMacMask… |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.30 | ColumnzxAnAclIpv6HybridDestMacMask | read-create | current | This is the wildcard mask for the zxAnAclIpv6HybridDestMac bits that must match. 0 bits in the mask indicate the corresponding bits in the zxAnAclIpv6HybridDes… |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.31 | ColumnzxAnAclIpv6HybridTrafficClass | read-create | current | Traffic class field of IPv6. 65535 means unconfigured. |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.32 | ColumnzxAnAclIpv6HybridFlowLabel | read-create | current | Flow label field of IPv6. 16777215(0xFFFFFF) means unconfigured. |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.33 | ColumnzxAnAclIpv6HybridIcmpType | read-create | current | Specifies the ICMPv6 type value to be matched against. A value of '0xFF' indicates not care about this field. If the zxAnAclIpv6HybridIpProto object in the sam… |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.34 | ColumnzxAnAclIpv6HybridIcmpCode | read-create | current | Specifies the ICMPv6 code value to be matched against. A value of '0xFF' indicates not care about this field. If the zxAnAclIpv6HybridIpProto object in the sam… |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.35 | ColumnzxAnAclIpv6HybridSrcIpGrpName | read-create | current | Name of the ACL rule parameter group for source IP. Empty string means the rule param group is unused. |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.36 | ColumnzxAnAclIpv6HybridDestIpGrpName | read-create | current | Name of the ACL rule parameter group for destination IP. Empty string means the rule param group is unused. |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.37 | ColumnzxAnAclIpv6HybridIcmpTypeOper | read-create | current | Specifies how an ICMP type is to be compared. If the zxAnAclIpv6HybridIpProto object in the same row does not indicate ICMPv6(58), this object has to be 'none(… |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.38 | ColumnzxAnAclIpv6HybridStartIcmpType | read-create | current | Specifies the ICMP type starting value to be matched against. A value of '0xFF' indicates not care about this field. If the zxAnAclIpv6HybridIpProto object in … |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.39 | ColumnzxAnAclIpv6HybridEndIcmpType | read-create | current | Specifies the ICMP type ending value to be matched against. A value of '0xFF' indicates not care about this field. If the zxAnAclIpv6HybridIpProto object in th… |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.45 | ColumnzxAnAclIpv6HybridTimeRangeName | read-create | current | Name of the time range. Empty string means all the time the rule is valid. |
| 1.3.6.1.4.1.3902.1082.70.15.2.2.7.1.50 | ColumnzxAnAclIpv6HybridRowStatus | read-create | current | The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a man… |
| 1.3.6.1.4.1.3902.1082.70.15.2.3 | NodezxAnAclAdvancedObjects | |||
| 1.3.6.1.4.1.3902.1082.70.15.2.3.2 | TablezxAnAclTimeRangeTable | not-accessible | current | ACL time range table. |
| 1.3.6.1.4.1.3902.1082.70.15.2.3.2.1 | RowzxAnAclTimeRangeEntry | not-accessible | current | ACL time range entry. |
| 1.3.6.1.4.1.3902.1082.70.15.2.3.2.1.1 | ColumnzxAnAclTimeRangeName | not-accessible | current | Name of the time range. |
| 1.3.6.1.4.1.3902.1082.70.15.2.3.2.1.2 | ColumnzxAnAclTimeRangeType | read-create | current | For example: onlyOnce: from 10:01:01 05-01-2007 to 12:01:01 05-01-2007 weekly: 14:00:00 to 22:00:00 friday. |
| 1.3.6.1.4.1.3902.1082.70.15.2.3.2.1.3 | ColumnzxAnAclOnceStartTime | read-create | current | Once range start time. |
| 1.3.6.1.4.1.3902.1082.70.15.2.3.2.1.4 | ColumnzxAnAclOnceEndTime | read-create | current | Once range end time. |
| 1.3.6.1.4.1.3902.1082.70.15.2.3.2.1.5 | ColumnzxAnAclWeeklyDay | read-create | current | Week day of the weekly time range. |
| 1.3.6.1.4.1.3902.1082.70.15.2.3.2.1.6 | ColumnzxAnAclWeeklyStartTime | read-create | current | Week range start time. For example: HH:MM:SS.(02:22:33). |
| 1.3.6.1.4.1.3902.1082.70.15.2.3.2.1.7 | ColumnzxAnAclWeeklyEndTime | read-create | current | Week range end time. For example: HH:MM:SS.(02:22:33). |
| 1.3.6.1.4.1.3902.1082.70.15.2.3.2.1.50 | ColumnzxAnAclTimeRangeRowStatus | read-create | current | The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a man… |
| 1.3.6.1.4.1.3902.1082.70.15.2.4 | NodezxAnAclIfConfObjects | |||
| 1.3.6.1.4.1.3902.1082.70.15.2.4.2 | TablezxAnAclIfConfTable | not-accessible | current | This table is to provide service that a specific Acl apply to a specific inteface with direction. Then the traffic that through this interface is managed accor… |
| 1.3.6.1.4.1.3902.1082.70.15.2.4.2.1 | RowzxAnAclIfConfEntry | not-accessible | current | An entry in zxAnAclIfConfTable. The multi-variables binding rule should be complied with when a manager creates an entry. According to this rule, all the relat… |
| 1.3.6.1.4.1.3902.1082.70.15.2.4.2.1.1 | ColumnzxAnAclIfConfDirection | not-accessible | current | Indicates whether this row's parameters are to be applied for ingress or for egress traffic. |
| 1.3.6.1.4.1.3902.1082.70.15.2.4.2.1.2 | ColumnzxAnAclIfConfAclNumber | read-create | current | The number of an ACL. Reference to the description of zxAnAclNumber. |
| 1.3.6.1.4.1.3902.1082.70.15.2.4.2.1.50 | ColumnzxAnAclIfConfRowStatus | read-create | current | The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a man… |
| 1.3.6.1.4.1.3902.1082.70.15.2.5 | NodezxAnAclRuleParamGroupObjects | |||
| 1.3.6.1.4.1.3902.1082.70.15.2.5.1 | TablezxAnAclRuleParamGroupTable | not-accessible | current | ACL rule parameter group table. |
| 1.3.6.1.4.1.3902.1082.70.15.2.5.1.1 | RowzxAnAclRuleParamGroupEntry | not-accessible | current | ACL rule parameter group entry. |
| 1.3.6.1.4.1.3902.1082.70.15.2.5.1.1.1 | ColumnzxAnAclRuleParamGroupName | not-accessible | current | ACL rule parameter group name. |
| 1.3.6.1.4.1.3902.1082.70.15.2.5.1.1.2 | ColumnzxAnAclRuleParamGroupType | read-create | current | ACL rule parameter group type. ip(1): IP. |
| 1.3.6.1.4.1.3902.1082.70.15.2.5.1.1.50 | ColumnzxAnAclRuleParamGroupRowStatus | read-create | current | The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a man… |
| 1.3.6.1.4.1.3902.1082.70.15.2.5.2 | TablezxAnAclRuleIpGroupTable | not-accessible | current | ACL IP address group table. |
| 1.3.6.1.4.1.3902.1082.70.15.2.5.2.1 | RowzxAnAclRuleIpGroupEntry | not-accessible | current | ACL IP address group entry. |
| 1.3.6.1.4.1.3902.1082.70.15.2.5.2.1.1 | ColumnzxAnAclRuleIpGroupId | not-accessible | current | Index of the IP. |
| 1.3.6.1.4.1.3902.1082.70.15.2.5.2.1.2 | ColumnzxAnAclRuleIpGroupIpType | read-create | current | IP type. |
| 1.3.6.1.4.1.3902.1082.70.15.2.5.2.1.3 | ColumnzxAnAclRuleIpGroupIp | read-create | current | IP address. |
| 1.3.6.1.4.1.3902.1082.70.15.2.5.2.1.4 | ColumnzxAnAclRuleIpGroupIpPfxLen | read-create | current | IP address prefix length. Only valid when zxAnAclRuleIpGroupIpType is ipv6. |
| 1.3.6.1.4.1.3902.1082.70.15.2.5.2.1.5 | ColumnzxAnAclRuleIpGroupIpMask | read-create | current | IP mask. Only valid when zxAnAclRuleIpGroupIpType is ipv4. |
| 1.3.6.1.4.1.3902.1082.70.15.2.5.2.1.50 | ColumnzxAnAclRuleIpGroupRowStatus | read-create | current | The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a man… |
| 1.3.6.1.4.1.3902.1082.70.15.3 | NodezxAnAclNotifications | |||
| 1.3.6.1.4.1.3902.1082.70.15.4 | NodezxAnAclConformance | |||
| 1.3.6.1.4.1.3902.1082.70.15.4.1 | NodezxAnAclCompliances | |||
| 1.3.6.1.4.1.3902.1082.70.15.4.1.1 | CompliancezxAnAclCompliance | current | The compliance statement for the ZTE-AN-ACL-MIB. | |
| 1.3.6.1.4.1.3902.1082.70.15.4.2 | NodezxAnAclGroups | |||
| 1.3.6.1.4.1.3902.1082.70.15.4.2.1 | GroupzxAnAclGroup | current | A collection of objects providing the access control list configuration information. | |
| 1.3.6.1.4.1.3902.1082.70.15.4.2.2 | GroupzxAnAclStandardRuleGroup | current | A collection of objects providing the standard ACL rule configuration information. | |
| 1.3.6.1.4.1.3902.1082.70.15.4.2.3 | GroupzxAnAclHybridRuleGroup | current | A collection of objects providing the hybrid ACL rule configuration information. | |
| 1.3.6.1.4.1.3902.1082.70.15.4.2.4 | GroupzxAnAclIfConfGroup | current | A collection of objects providing the configuration information of ACL apply to the interface. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| ZxAnAclOperator | INTEGER { none(1), equal(2), greater(3), less(4), range(5) } | current | Indicates how an numeric object is to be compared. none(1) means that no comparison is to be made with the object. equal(2) means equal, greater(3) means greater than or equal, less(4) means less than or equal. Those 3 … |
| ZxAnAclPortOperator | INTEGER { none(1), eq(2), ge(3), le(4), range(5) } | current | Indicates how a packet's TCP/UDP port number is to be compared. none(1) means that no comparison is to be made with the TCP/UDP port number. eq(2) means equal, ge(3) means greater than or equal, le(4) means less than or… |