ZTE-AN-CHASSIS-MIB
121 objects
This MIB defines zte Access Node chassis managed objects.
Imported Objects
| INET-ADDRESS-MIB | InetAddress InetAddressPrefixLength InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DateAndTime DisplayString RowStatus TruthValue |
| ZTE-AN-SMI | zxAccessNode zxAnEquipment |
| ZTE-AN-SOFTWARE-MIB | zxAnSwCardVersion |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3902.1082.10.1 | IdentityzxAnChassisMib | This MIB defines zte Access Node chassis managed objects. | ||
| 1.3.6.1.4.1.3902.1082.10.1.1 | NodezxAnChassisGlobalObjects | |||
| 1.3.6.1.4.1.3902.1082.10.1.1.1 | ScalarzxAnChassisSysReboot | read-write | current | Reboot system. |
| 1.3.6.1.4.1.3902.1082.10.1.1.2 | ScalarzxAnChassisSysLastRebootReason | read-only | current | It indicates device coldstart or warmstart reason byCli(1) warmstart by command, byNms(2) warmstart by network management, byWatchdog(3) warmstart by watchdog,… |
| 1.3.6.1.4.1.3902.1082.10.1.1.3 | ScalarzxAnChassisSysLastSwapReason | read-only | current | Last swap request,such as force,plug-out or others. forced(1) swap by command or network management, cardOffline(2) swap by the main control board poweroff or … |
| 1.3.6.1.4.1.3902.1082.10.1.1.4 | ScalarzxAnChassisPnpMode | read-write | current | config Ne card PNP mode,PNP mode means when card on shelf, then this card can use without add it |
| 1.3.6.1.4.1.3902.1082.10.1.1.5 | ScalarzxAnChassisSysRebootTimes | read-only | current | The system rebooting times |
| 1.3.6.1.4.1.3902.1082.10.1.1.6 | ScalarzxAnChassisSysRebootTimesClear | read-write | current | Clear the system rebooting times. When get this variable, always return 1. |
| 1.3.6.1.4.1.3902.1082.10.1.1.7 | ScalarzxAnChassisCardResetTimesClear | read-write | current | Clear the resetting times of all cards of the NE. When get this variable, always return 1. |
| 1.3.6.1.4.1.3902.1082.10.1.1.100 | ScalarzxAnChassisCapabilities | read-only | current | The chassis management capabilities of this equipment. The bit value 1 means the function represented by this bit is supported. mcuVerAndBootVerAndPnSupported(… |
| 1.3.6.1.4.1.3902.1082.10.1.2 | NodezxAnChassisObjects | |||
| 1.3.6.1.4.1.3902.1082.10.1.2.2 | TablezxAnRackTable | not-accessible | current | This table includes the enable or disable plug and play of the rack. |
| 1.3.6.1.4.1.3902.1082.10.1.2.2.1 | RowzxAnRackEntry | not-accessible | current | An entry in zxAnRackTable. This table is not supported in C6XX. |
| 1.3.6.1.4.1.3902.1082.10.1.2.2.1.1 | ColumnzxAnRack | not-accessible | current | The range of zxAnRack is 1~1 for DT |
| 1.3.6.1.4.1.3902.1082.10.1.2.2.1.2 | ColumnzxAnRackActualType | read-only | current | This MIB is defined for actual rack type. |
| 1.3.6.1.4.1.3902.1082.10.1.2.2.1.3 | ColumnzxAnRackConfType | read-create | current | This MIB is defined for configged rack type. |
| 1.3.6.1.4.1.3902.1082.10.1.2.2.1.4 | ColumnzxAnRackInvSn | read-create | current | This MIB is defined for serial number of this rack. it is used by inventroy management. |
| 1.3.6.1.4.1.3902.1082.10.1.2.2.1.50 | ColumnzxAnRackRowStatus | read-create | current | The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). In particular, a newly created row cannot b… |
| 1.3.6.1.4.1.3902.1082.10.1.2.3 | TablezxAnShelfTable | not-accessible | current | This table includes the enable or disable plug and play of the shelf. |
| 1.3.6.1.4.1.3902.1082.10.1.2.3.1 | RowzxAnShelfEntry | not-accessible | current | An entry in zxAnShelfTable. |
| 1.3.6.1.4.1.3902.1082.10.1.2.3.1.1 | ColumnzxAnShelf | not-accessible | current | The range of zxAnShelf is 1~1 for DT |
| 1.3.6.1.4.1.3902.1082.10.1.2.3.1.2 | ColumnzxAnShelfHardwareVersion | read-only | current | The hard driver on the shelf. |
| 1.3.6.1.4.1.3902.1082.10.1.2.3.1.3 | ColumnzxAnShelfActualType | read-only | current | The actual shelf type. |
| 1.3.6.1.4.1.3902.1082.10.1.2.3.1.4 | ColumnzxAnShelfConfType | read-create | current | The configuration shelf type. |
| 1.3.6.1.4.1.3902.1082.10.1.2.3.1.5 | ColumnzxAnShelfInvSn | read-create | current | The serial number of this shelf. it is used by inventroy management. |
| 1.3.6.1.4.1.3902.1082.10.1.2.3.1.6 | ColumnzxAnShelfCleiCode | read-only | current | The CLEI code of this Shelf. it is used by inventroy management.Please reference http://www.commonlanguage.com to get knowledge about CLEI code. |
| 1.3.6.1.4.1.3902.1082.10.1.2.3.1.7 | ColumnzxAnLogicShelfNo | read-create | current | The logic Shelf number |
| 1.3.6.1.4.1.3902.1082.10.1.2.3.1.50 | ColumnzxAnShelfRowStatus | read-create | current | The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). In particular, a newly created row cannot b… |
| 1.3.6.1.4.1.3902.1082.10.1.2.4 | TablezxAnCardTable | not-accessible | current | This table includes the enable or disable plug and play of the Card. |
| 1.3.6.1.4.1.3902.1082.10.1.2.4.1 | RowzxAnCardEntry | not-accessible | current | An entry in zxAnCardTable. |
| 1.3.6.1.4.1.3902.1082.10.1.2.4.1.1 | ColumnzxAnSlot | not-accessible | current | The range of zxAnSlot is 0~20 for DT IEC-SHELF, and the range of zxAnSlot is 0~22 for DT ETSI-SHELF |
| 1.3.6.1.4.1.3902.1082.10.1.2.4.1.2 | ColumnzxAnCardConfMainType | read-create | current | The main card type to config on the slot. Main card type indicates the category of hardware, such as 64-ports adsl card,4-ports ethernet card. |
| 1.3.6.1.4.1.3902.1082.10.1.2.4.1.3 | ColumnzxAnCardActualMainType | read-only | current | The actually main card type on the slot. |
| 1.3.6.1.4.1.3902.1082.10.1.2.4.1.4 | ColumnzxAnCardActualType | read-only | current | The actually card type on the slot. Card type indicates the type of detailed hardware,such as ATUGA and ATUGB, they'er all 32-ports Adsl card and they all prov… |
| 1.3.6.1.4.1.3902.1082.10.1.2.4.1.5 | ColumnzxAnCardOperStatus | read-only | current | This MIB is defined for the card status. inService(1) being provided normally. notInService(2) stopped. hwOnline(3) software isn't running now. hwOffline(4) ad… |
| 1.3.6.1.4.1.3902.1082.10.1.2.4.1.6 | ColumnzxAnCardAdminStatus | read-create | current | This MIB is defined for the card admin status on the card. For example:reset(1),switch(2) reset(1) switch(2) status. stopService(3) active(4) service. deactive… |
| 1.3.6.1.4.1.3902.1082.10.1.2.4.1.7 | ColumnzxAnCardPortNums | read-only | current | The numbers of physical port which contained in this board. If the board has no this attribute,it should be 0. |
| 1.3.6.1.4.1.3902.1082.10.1.2.4.1.8 | ColumnzxAnCardActivePortNums | read-only | current | The numbers of actived physical port which contained in this board. If the board has no this attribute,it should be 0. |
| 1.3.6.1.4.1.3902.1082.10.1.2.4.1.9 | ColumnzxAnCardCpuLoad | read-only | current | The current CPU load of this board.If this board has more than one CPU,the average value is allowed. If the board has no this attribute,it should be 0. |
| 1.3.6.1.4.1.3902.1082.10.1.2.4.1.10 | ColumnzxAnCardCpuLoadThreshold | read-create | current | The CPU load threshold of this board.When zxAnCardCpuLoad is higher than zxAnCardCpuLoadThreshold,zxAnChassisCardCpuOverloadAlm trap should be generated by age… |
| 1.3.6.1.4.1.3902.1082.10.1.2.4.1.11 | ColumnzxAnCardMemUsage | read-only | current | The current memory usage of this board. If the board has no this attribute,it should be 0. |
| 1.3.6.1.4.1.3902.1082.10.1.2.4.1.12 | ColumnzxAnCardMemUsageThreshold | read-create | current | The memory usage threshold of this board. When zxAnCardMemUsage is higher than zxAnCardMemUsageThreshold,zxAnChassisCardMemOverloadAlm trap should be generated… |
| 1.3.6.1.4.1.3902.1082.10.1.2.4.1.13 | ColumnzxAnCardStandbyStatus | read-only | current | The card operation status on the card. |
| 1.3.6.1.4.1.3902.1082.10.1.2.4.1.14 | ColumnzxAnCardInvSn | read-create | current | The serial number of this card. it is used by inventroy management. |
| 1.3.6.1.4.1.3902.1082.10.1.2.4.1.15 | ColumnzxAnCardCleiCode | read-only | current | The CLEI code of this card. it is used by inventroy management.Please reference http://www.commonlanguage.com to get knowledge about CLEI code. |
| 1.3.6.1.4.1.3902.1082.10.1.2.4.1.16 | ColumnzxAnCardAccessoriesType | read-only | current | The accessories type of this card, such as splitter of DSLAM,the value of this variable should be the type of hardware, eg. PNVTA,PNVNP,PNVNA of ZXDSL9800's sp… |
| 1.3.6.1.4.1.3902.1082.10.1.2.4.1.17 | ColumnzxAnCardAccessoriesOperStatus | read-only | current | The operational status of the card accessories. |
| 1.3.6.1.4.1.3902.1082.10.1.2.4.1.19 | ColumnzxAnCardMemSize | read-only | current | The current memory size of this board. If the board has no this attribute,it should be 0. |
| 1.3.6.1.4.1.3902.1082.10.1.2.4.1.21 | ColumnzxAnCardAvailableStorageSize | read-only | current | The available storage space size in this card. For Non-C600 series, the units of this object is bytes. For C600 series, the units of this object is kbytes. |
| 1.3.6.1.4.1.3902.1082.10.1.2.4.1.22 | ColumnzxAnCardTotalStorageSize | read-only | current | The total storage space size in this card. For Non-C600 series, the units of this object is bytes. For C600 series, the units of this object is kbytes. |
| 1.3.6.1.4.1.3902.1082.10.1.2.4.1.23 | ColumnzxAnCardHardwareVersion | read-only | current | The hard version in this card. |
| 1.3.6.1.4.1.3902.1082.10.1.2.4.1.24 | ColumnzxAnCardPowerSavingEnable | read-create | current | Enable or disable the power saving of the card. |
| 1.3.6.1.4.1.3902.1082.10.1.2.4.1.25 | ColumnzxAnCardLastStartupTime | read-only | current | The last startup time of the card. |
| 1.3.6.1.4.1.3902.1082.10.1.2.4.1.26 | ColumnzxAnCardCpldVersion | read-only | current | The CPLD version in this card. |
| 1.3.6.1.4.1.3902.1082.10.1.2.4.1.27 | ColumnzxAnCardFirmwareVersion | read-only | current | The firmware version in this card. |
| 1.3.6.1.4.1.3902.1082.10.1.2.4.1.28 | ColumnzxAnCardOtherFirmwareVersions | read-only | current | The other firmware versions in this card. |
| 1.3.6.1.4.1.3902.1082.10.1.2.4.1.29 | ColumnzxAnCardManufacturingCode | read-only | current | The manufacturing code of the card. |
| 1.3.6.1.4.1.3902.1082.10.1.2.4.1.30 | ColumnzxAnCardCpuOverloadReason | accessible-for-notify | current | The CPU overloading reason. normal(1): value 1 means the CPU load is normal. tooManyNetworkPackets(2): value 2 means that the CPU is busy processing too many n… |
| 1.3.6.1.4.1.3902.1082.10.1.2.4.1.31 | ColumnzxAnCardMcuVersion | read-only | current | The MCU version in this card. |
| 1.3.6.1.4.1.3902.1082.10.1.2.4.1.32 | ColumnzxAnCardBootwareVersion | read-only | current | The bootware version in this card. |
| 1.3.6.1.4.1.3902.1082.10.1.2.4.1.33 | ColumnzxAnCardPn | read-only | current | The part number of the card. |
| 1.3.6.1.4.1.3902.1082.10.1.2.4.1.34 | ColumnzxAnCardLastResetReason | read-only | current | The card last reset reason. |
| 1.3.6.1.4.1.3902.1082.10.1.2.4.1.35 | ColumnzxAnCardCpuInfo | read-only | current | The CPU information of the card. Empty string means the card has no this attribute. |
| 1.3.6.1.4.1.3902.1082.10.1.2.4.1.36 | ColumnzxAnCardChipsetType | read-only | current | The chipset type of the card. |
| 1.3.6.1.4.1.3902.1082.10.1.2.4.1.37 | ColumnzxAnCardChipsetInfo | read-only | current | The chipset information of the card. Empty string means the card has no this attribute. |
| 1.3.6.1.4.1.3902.1082.10.1.2.4.1.38 | ColumnzxAnCardOperatorCode | read-create | current | The operator code of the card. Empty string means the attribute of the card is unconfigured. |
| 1.3.6.1.4.1.3902.1082.10.1.2.4.1.39 | ColumnzxAnCardSubCardName | read-create | current | The clock sub card on main board. |
| 1.3.6.1.4.1.3902.1082.10.1.2.4.1.40 | ColumnzxAnCardResetTimes | read-only | current | The resetting times of the card. |
| 1.3.6.1.4.1.3902.1082.10.1.2.4.1.41 | ColumnzxAnCardResetTimesClear | read-create | current | Clear the resetting times of the card. When get this variable, always return 1. |
| 1.3.6.1.4.1.3902.1082.10.1.2.4.1.42 | ColumnzxAnCardName | read-only | current | The name of the card. |
| 1.3.6.1.4.1.3902.1082.10.1.2.4.1.43 | ColumnzxAnCardMachineId | read-only | current | The machine ID of the card. |
| 1.3.6.1.4.1.3902.1082.10.1.2.4.1.50 | ColumnzxAnCardRowStatus | read-create | current | The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). In particular, a newly created row cannot b… |
| 1.3.6.1.4.1.3902.1082.10.1.2.8 | TablezxAnCardBladeTable | not-accessible | current | The card blade table. |
| 1.3.6.1.4.1.3902.1082.10.1.2.8.1 | RowzxAnCardBladeEntry | not-accessible | current | An entry in zxAnCardBladeTable. |
| 1.3.6.1.4.1.3902.1082.10.1.2.8.1.1 | ColumnzxAnCardBladeAdminStatus | read-write | current | The administrative status of the card blade. |
| 1.3.6.1.4.1.3902.1082.10.1.2.8.1.2 | ColumnzxAnCardBladeOperStatus | read-only | current | The operational status of the card blade. |
| 1.3.6.1.4.1.3902.1082.10.1.2.8.1.3 | ColumnzxAnCardBladeIpv4Address | read-write | current | The IPv4 address of the card blade. |
| 1.3.6.1.4.1.3902.1082.10.1.2.8.1.4 | ColumnzxAnCardBladeIpv4AddrSubnetMask | read-write | current | The IPv4 address subnet mask of the card blade. |
| 1.3.6.1.4.1.3902.1082.10.1.2.8.1.5 | ColumnzxAnCardBladeIpv4AddrGateway | read-write | current | The IPv4 gateway of the card blade. |
| 1.3.6.1.4.1.3902.1082.10.1.2.8.1.6 | ColumnzxAnCardBladeIpv6Address | read-write | current | The IPv6 address of the card blade. |
| 1.3.6.1.4.1.3902.1082.10.1.2.8.1.7 | ColumnzxAnCardBladeIpv6AddrPfxLen | read-write | current | The IPv6 address subnet prefix length of the card blade. |
| 1.3.6.1.4.1.3902.1082.10.1.2.8.1.8 | ColumnzxAnCardBladeIpv6AddrGateway | read-write | current | The IPv6 gateway of the card blade. |
| 1.3.6.1.4.1.3902.1082.10.1.2.51 | TablezxAnCardHisMinPerfTable | not-accessible | current | The 5 minutes or 15 minutes interval performance data table of card. |
| 1.3.6.1.4.1.3902.1082.10.1.2.51.1 | RowzxAnCardHisMinPerfEntry | not-accessible | current | The 5 minutes or 15 minutes interval performance data entry of card. |
| 1.3.6.1.4.1.3902.1082.10.1.2.51.1.1 | ColumnzxAnCardHisMinIntervalNo | not-accessible | current | The performance data interval number. 1 means the the most recent previous interval; If the performance collection interval is 5 minutes, intervals 2..288 are … |
| 1.3.6.1.4.1.3902.1082.10.1.2.51.1.2 | ColumnzxAnCardHisMinIntervalValidData | read-only | current | Performance data validity. |
| 1.3.6.1.4.1.3902.1082.10.1.2.51.1.3 | ColumnzxAnCardHisMinDateTime | read-only | current | The 5 minutes or 15 minutes interval performance data generation time. |
| 1.3.6.1.4.1.3902.1082.10.1.2.51.1.4 | ColumnzxAnCardHisMinCpuLoad | read-only | current | The average CPU load of this card in the historical 5 minutes or 15 minutes. If the card has no this attribute, it should be 0. |
| 1.3.6.1.4.1.3902.1082.10.1.2.51.1.5 | ColumnzxAnCardHisMinMemUsage | read-only | current | The average memory usage of this card in the historical 5 minutes or 15 minutes. If the card has no this attribute, it should be 0. |
| 1.3.6.1.4.1.3902.1082.10.1.3 | NodezxAnChassisNotifications | |||
| 1.3.6.1.4.1.3902.1082.10.1.3.1 | NodezxAnChassisSysTraps | |||
| 1.3.6.1.4.1.3902.1082.10.1.3.1.2 | NotificationzxAnChassisCtrlCardSwappedAlm | current | A zxAnChassisCtrlCardSwappedAlm trap indicates that the main control card has swapped to slave card. | |
| 1.3.6.1.4.1.3902.1082.10.1.3.1.3 | NotificationzxAnChassisCtrlCardSwappedClr | current | A zxAnChassisCtrlCardSwappedClr trap indicates that the main control card swapped trap has cleared. | |
| 1.3.6.1.4.1.3902.1082.10.1.3.2 | NodezxAnChassisCardTraps | |||
| 1.3.6.1.4.1.3902.1082.10.1.3.2.1 | NotificationzxAnChassisCardOffline | current | A zxAnChassisCardOffline trap is sent when the agent has detected that the configured card has plugged out. | |
| 1.3.6.1.4.1.3902.1082.10.1.3.2.2 | NotificationzxAnChassisCardOnline | current | A zxAnChassisCardOnline trap is sent when the agent has detected that the configured card has plugged in. | |
| 1.3.6.1.4.1.3902.1082.10.1.3.2.3 | NotificationzxAnChassisCardTypeMismatchAlm | current | A zxAnChassisCardTypeMismatchAlm trap is sent when the agent has detected that the card has plugged in ,but zxAnCardConfMainType is not same as zxAnCardActualT… | |
| 1.3.6.1.4.1.3902.1082.10.1.3.2.4 | NotificationzxAnChassisCardTypeMismatchClr | current | A zxAnChassisCardTypeMismatchClr trap is sent when the agent has detected that the card has plugged in and zxAnCardConfMainType is same as zxAnCardActualType. | |
| 1.3.6.1.4.1.3902.1082.10.1.3.2.5 | NotificationzxAnChassisCardNotRunningAlm | current | A zxAnChassisCardNotRunningAlm trap is sent when the agent has detected that the card has plugged in and configured, but it is not running. | |
| 1.3.6.1.4.1.3902.1082.10.1.3.2.6 | NotificationzxAnChassisCardNotRunningClr | current | A zxAnChassisCardNotRunningClr trap is sent when the agent has detected that the card is inservice. | |
| 1.3.6.1.4.1.3902.1082.10.1.3.2.7 | NotificationzxAnChassisCardNotConfiguredAlm | current | A zxAnEquipCardNotConfigured trap is sent when the agent has detected that the card has plugged in but not configured. | |
| 1.3.6.1.4.1.3902.1082.10.1.3.2.8 | NotificationzxAnChassisCardNotConfiguredClr | current | A zxAnChassisCardNotConfiguredClr trap is sent when the agent has detected that the card has plugged in and configured. | |
| 1.3.6.1.4.1.3902.1082.10.1.3.2.9 | NotificationzxAnChassisCardRstBtnAbnormalAlm | current | A zxAnChassisCardRstBtnAbnormalAlm trap is sent when the agent has detected that the reset button of the card is abnormal. | |
| 1.3.6.1.4.1.3902.1082.10.1.3.2.10 | NotificationzxAnChassisCardRstBtnAbnormalClr | current | A zxAnChassisCardRstBtnAbnormalClr trap is sent when the agent has detected that the reset button of the card is normal. | |
| 1.3.6.1.4.1.3902.1082.10.1.3.2.20 | NotificationzxAnChassisCardCpuOverloadAlm | current | It indicates that the agent has detected that the zxAnChassisCardCPULoad object of one card has exceeded the configured threshhold value of zxAnCardCpuLoadThre… | |
| 1.3.6.1.4.1.3902.1082.10.1.3.2.21 | NotificationzxAnChassisCardCpuOverloadClr | current | It indicates that the agent has detected that the zxAnChassisCardCPULoad object of one card has less than the configured threshhold value of zxAnCardCpuLoadThr… | |
| 1.3.6.1.4.1.3902.1082.10.1.3.2.22 | NotificationzxAnChassisCardMemOverloadAlm | current | It indicates that the agent has detected that the zxAnChassisCardMemUsage object of one card has exceeded the configured threshhold value of zxAnCardMemUsageTh… | |
| 1.3.6.1.4.1.3902.1082.10.1.3.2.23 | NotificationzxAnChassisCardMemOverloadClr | current | It indicates that the agent has detected that the zxAnChassisCardMemUsage object of one card has less than the configured threshhold value of zxAnCardMemUsageT… | |
| 1.3.6.1.4.1.3902.1082.10.1.3.2.24 | NotificationzxAnChassisCardResourceAdded | current | A zxAnChassisCardResourceAdded trap is sent when the agent has detected that the card has come into inService status. | |
| 1.3.6.1.4.1.3902.1082.10.1.3.2.25 | NotificationzxAnChassisCardResourceDeleted | current | A zxAnChassisCardResourceDeleted trap is sent when the agent has detected that the card has been deleted. | |
| 1.3.6.1.4.1.3902.1082.10.1.4 | NodezxAnChassisConformance | |||
| 1.3.6.1.4.1.3902.1082.10.1.4.1 | NodezxAnChassisCompliances | |||
| 1.3.6.1.4.1.3902.1082.10.1.4.1.1 | CompliancezxAnChassisCompliance | current | The compliance statement for SNMP entities which implement the ZTE-AN-CHASSIS-MIB. | |
| 1.3.6.1.4.1.3902.1082.10.1.4.2 | NodezxAnChassisGroups | |||
| 1.3.6.1.4.1.3902.1082.10.1.4.2.1 | GroupzxAnChassisSysMgmtGroup | current | The notifications which indicate reboot,set-pnp and last reboot or swap reason. | |
| 1.3.6.1.4.1.3902.1082.10.1.4.2.2 | GroupzxAnChassisRackMgmtGroup | current | The collection of objects which are used to represent rack information and to manage rack. | |
| 1.3.6.1.4.1.3902.1082.10.1.4.2.3 | GroupzxAnChassisShelfMgmtGroup | current | The collection of objects which are used to represent shelf information and to manage shelf. | |
| 1.3.6.1.4.1.3902.1082.10.1.4.2.4 | GroupzxAnChassisCardMgmtGroup | current | The collection of objects which are used to represent card information and to manage card. | |
| 1.3.6.1.4.1.3902.1082.10.1.4.2.5 | GroupzxAnChassisSubCardMgmtGroup | current | The collection of objects which are used to represent subcard information and to manage subcard. | |
| 1.3.6.1.4.1.3902.1082.10.1.4.2.6 | GroupzxAnChassisSysTrapsGroup | current | The notifications which indicate swap information. | |
| 1.3.6.1.4.1.3902.1082.10.1.4.2.7 | GroupzxAnChassisCardTrapsGroup | current | The notifications which indicate specific changes, include card status, card cpu load status and memory load status. |