ZTE-AN-CLOCK-MIB
78 objects
The MIB module for the management of Clock.
Imported Objects
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | RowStatus |
| ZTE-AN-SMI | zxAnClockSync |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3902.1082.120.10 | IdentityzxAnClockMib | The MIB module for the management of Clock. | ||
| 1.3.6.1.4.1.3902.1082.120.10.1 | NodezxAnClockGlobalObjects | |||
| 1.3.6.1.4.1.3902.1082.120.10.1.1 | ScalarzxAnClockExtOutQlMinimum | read-create | current | The ssm threshold to open or close external output clock(T4). open : QL >= zxAnClockExtOutQlMinimum close : QL < zxAnClockExtOutQlMinimum First time to set thi… |
| 1.3.6.1.4.1.3902.1082.120.10.1.2 | ScalarzxAnClockExtOutMode | read-create | current | Mode of external output clock. First time to set this object: zxAnClockExtOutQlMinimum must be set together, and inhibit zxAnClockExtOutQlMinimum be ssmNULL or… |
| 1.3.6.1.4.1.3902.1082.120.10.1.3 | ScalarzxAnClockWorkMode | read-write | current | This attribute specifies the clock work mode comply with G.781 section 5.12 Automatic reference selection process. |
| 1.3.6.1.4.1.3902.1082.120.10.1.4 | ScalarzxAnClockWaitToRestoreTime | read-write | current | This attribute specifies the clock source wait to restore time, comply with G.781 section 5.9 wait to restore time. |
| 1.3.6.1.4.1.3902.1082.120.10.1.5 | ScalarzxAnClockHoldOffTime | read-write | current | This attribute specifies the clock source hold-off Time, comply with G.781 section 5.8 hold-off time. |
| 1.3.6.1.4.1.3902.1082.120.10.1.6 | ScalarzxAnClockOperationStatus | read-write | current | This attribute specifies clock operation status. freerunPhaselockedNormal,holdOver: set means force PLL switch to freerun/holdover state. geted means PLL is fo… |
| 1.3.6.1.4.1.3902.1082.120.10.1.7 | ScalarzxAnClockActiveId | read-only | current | Active clock id. If get zero,means Internal clock is active. If not,means zxAnClockActiveId is a giving zxAnClockSrcId which related to a record of zxAnClockSr… |
| 1.3.6.1.4.1.3902.1082.120.10.1.8 | ScalarzxAnClockPllState | read-only | current | state of pll. preLocked2: This state is very similar to the preLocked state. It is entered from the Holdover state when a reference source has been selected an… |
| 1.3.6.1.4.1.3902.1082.120.10.1.9 | ScalarzxAnClockSrcSwitchReason | read-only | current | clock source switch reason: 1, CLOCKSOURCE_SWITCH_ABMNORMAL, 2, CLOCKSOURCE_SWITCH_S1CHANGE, 3, CLOCKSOURCE_SWITCH_ALMCHANGE, 4, CLOCKSOURCE_SWITCH_PRICHANGE, … |
| 1.3.6.1.4.1.3902.1082.120.10.1.10 | ScalarzxAnClockSrcSwitchOldInfo | read-only | current | the active clock source identify before switch: |shelf| slot | port |clockType| 0000 0000 0000 0000 0000 0000 0000 0000 clockType: 0: internal clock 2: externa… |
| 1.3.6.1.4.1.3902.1082.120.10.1.11 | ScalarzxAnClockSrcSwitchNewInfo | read-only | current | the active clock source identify after switch: |shelf| slot | port |clockType| 0000 0000 0000 0000 0000 0000 0000 0000 clockType: 0: internal clock 2: external… |
| 1.3.6.1.4.1.3902.1082.120.10.1.12 | ScalarzxAnClockLastPllStatus | read-only | current | The last status of clock PLL. |
| 1.3.6.1.4.1.3902.1082.120.10.2 | NodezxAnClockObjects | |||
| 1.3.6.1.4.1.3902.1082.120.10.2.1 | NodezxAnClockSrcFunc | |||
| 1.3.6.1.4.1.3902.1082.120.10.2.1.1 | TablezxAnClockSrcTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.1082.120.10.2.1.1.1 | RowzxAnClockSrcEntry | not-accessible | current | ClockSource entry. Entries in the zxClockSrcTable are created and deleted by using zxAnClockSrcEntryStatus object. When create the zxClockSrcTable, zxAnClockSr… |
| 1.3.6.1.4.1.3902.1082.120.10.2.1.1.1.1 | ColumnzxAnClockSrcId | not-accessible | current | clock source id |
| 1.3.6.1.4.1.3902.1082.120.10.2.1.1.1.2 | ColumnzxAnClockSrcShelf | read-create | current | This object indicates the shelf number. |
| 1.3.6.1.4.1.3902.1082.120.10.2.1.1.1.3 | ColumnzxAnClockSrcSlot | read-create | current | This object indicates the slot number. In IEC19Shelf type ,value 21,22 are not supported. |
| 1.3.6.1.4.1.3902.1082.120.10.2.1.1.1.4 | ColumnzxAnClockSrcPort | read-create | current | This object indicates the port number. 0 is only used for internal clock source. 1-4 is used for uplink card. 1-2 is used for common interface card, and other … |
| 1.3.6.1.4.1.3902.1082.120.10.2.1.1.1.5 | ColumnzxAnClockSrcType | read-create | current | This object indicates the source type internalClock,maintainClock for master card externalClock for interface card e1Clock not supported this version stm1Clock… |
| 1.3.6.1.4.1.3902.1082.120.10.2.1.1.1.6 | ColumnzxAnClockSrcPriority | read-create | current | 1 has the highest priority. Priority can be write 1-250, when zxClockSrcPriority is created and modified. |
| 1.3.6.1.4.1.3902.1082.120.10.2.1.1.1.7 | ColumnzxAnClockSrcTxS1 | read-only | current | transmitted QL-level |
| 1.3.6.1.4.1.3902.1082.120.10.2.1.1.1.8 | ColumnzxAnClockSrcRxS1 | read-only | current | received QL-level. 16-254 not supported.255 means not received QL-level. |
| 1.3.6.1.4.1.3902.1082.120.10.2.1.1.1.9 | ColumnzxAnClockSrcAlarm | read-only | current | This attribute specifies alarm of this clock reference source. normal: the alarm status is normal, this value is disused. abnormal: the alarm status is abnorma… |
| 1.3.6.1.4.1.3902.1082.120.10.2.1.1.1.10 | ColumnzxAnClockSrcExtInQuality | read-create | current | Quality level of input clock. This object must be written with a certain value excluding SsmNULL when creating external clock. |
| 1.3.6.1.4.1.3902.1082.120.10.2.1.1.1.11 | ColumnzxAnClockSrcExtInMode | read-create | current | Mode of external input clock. This object must be written with a certain value excluding clockNULL when creating external clock. |
| 1.3.6.1.4.1.3902.1082.120.10.2.1.1.1.12 | ColumnzxAnClockSrcSwitchMode | read-create | current | This attribute specifies clock source switch mode in G.781. none: no switch operator on or be locked out. forced: force switch on. manual: manual switch on. lo… |
| 1.3.6.1.4.1.3902.1082.120.10.2.1.1.1.50 | ColumnzxAnClockSrcEntryStatus | read-create | current | The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). In particular, a newly created row cannot b… |
| 1.3.6.1.4.1.3902.1082.120.10.2.2 | NodezxAnClockSsmFunc | |||
| 1.3.6.1.4.1.3902.1082.120.10.2.2.1 | TablezxAnClockSsmSendTable | not-accessible | current | SSM/QL-level overwriting management of clock tx port. |
| 1.3.6.1.4.1.3902.1082.120.10.2.2.1.1 | RowzxAnClockSsmSendEntry | not-accessible | current | It is entry in the zxClockSsmSendTable. Entries in the zxClockSsmSendTable are created and deleted using the zxClockSsmSendRowStatus object. When create the zx… |
| 1.3.6.1.4.1.3902.1082.120.10.2.2.1.1.1 | ColumnzxAnClockSsmSendId | not-accessible | current | ssm send id |
| 1.3.6.1.4.1.3902.1082.120.10.2.2.1.1.2 | ColumnzxAnClockSsmSendShelf | read-create | current | This object indicates the shelf number. |
| 1.3.6.1.4.1.3902.1082.120.10.2.2.1.1.3 | ColumnzxAnClockSsmSendSlot | read-create | current | Tis object indicates the slot number. In IEC19Shelf type ,value 21,22 are not supported. |
| 1.3.6.1.4.1.3902.1082.120.10.2.2.1.1.4 | ColumnzxAnClockSsmSendPort | read-create | current | Tis object indicates the port number. 1-4 is used for uplink card. 1-8 is used for pon card |
| 1.3.6.1.4.1.3902.1082.120.10.2.2.1.1.5 | ColumnzxAnClockSsmSendBytes | read-create | current | This attribute defines the SSM sent bytes. Only support 0,2,4,8,11,15. |
| 1.3.6.1.4.1.3902.1082.120.10.2.2.1.1.50 | ColumnzxAnClockSsmSendRowStatus | read-create | current | The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). In particular, a newly created row cannot b… |
| 1.3.6.1.4.1.3902.1082.120.10.2.2.2 | TablezxAnClockEsmcTable | not-accessible | current | This managed entity represents the ESMC(Ethernet Synchronization Messaging Channel). |
| 1.3.6.1.4.1.3902.1082.120.10.2.2.2.1 | RowzxAnClockEsmcEntry | not-accessible | current | It is entry in the zxClockEsmcTable. Entries in the zxClockEsmcTable are created and deleted using the zxClockEsmcRowStatus object. When create the zxAnClockEs… |
| 1.3.6.1.4.1.3902.1082.120.10.2.2.2.1.1 | ColumnzxAnClockEsmcId | not-accessible | current | This object indicates clock ESMC recoder id. |
| 1.3.6.1.4.1.3902.1082.120.10.2.2.2.1.2 | ColumnzxAnClockEsmcShelf | read-create | current | This object indicates the shelf number. |
| 1.3.6.1.4.1.3902.1082.120.10.2.2.2.1.3 | ColumnzxAnClockEsmcSlot | read-create | current | This object indicates the slot number. In IEC19Shelf type ,value 21,22 are not supported. |
| 1.3.6.1.4.1.3902.1082.120.10.2.2.2.1.4 | ColumnzxAnClockEsmcPort | read-create | current | This object indicates the port number. 1-4 is used for uplink card. 1-8 is used for pon card. |
| 1.3.6.1.4.1.3902.1082.120.10.2.2.2.1.50 | ColumnzxAnClockEsmcRowStatus | read-create | current | The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). In particular, a newly created row cannot b… |
| 1.3.6.1.4.1.3902.1082.120.10.2.3 | NodezxAnClockCardClockConfFunc | |||
| 1.3.6.1.4.1.3902.1082.120.10.2.3.2 | TablezxAnClockCardClockConfTable | not-accessible | current | The card clock configuration table. |
| 1.3.6.1.4.1.3902.1082.120.10.2.3.2.1 | RowzxAnClockCardClockConfEntry | not-accessible | current | The card clock configuration entry. |
| 1.3.6.1.4.1.3902.1082.120.10.2.3.2.1.1 | ColumnzxAnClockCardClockConfRack | not-accessible | current | The rack number of the card. |
| 1.3.6.1.4.1.3902.1082.120.10.2.3.2.1.2 | ColumnzxAnClockCardClockConfShelf | not-accessible | current | The shelf number of the card. |
| 1.3.6.1.4.1.3902.1082.120.10.2.3.2.1.3 | ColumnzxAnClockCardClockConfSlot | not-accessible | current | The slot number of the card. |
| 1.3.6.1.4.1.3902.1082.120.10.2.3.2.1.4 | ColumnzxAnClockCardClockConfType | read-write | current | The card clock configuration type. There are two types: systemClock(1): it means the card clock type is the system clock. localClock(2): it means the card cloc… |
| 1.3.6.1.4.1.3902.1082.120.10.3 | NodezxAnClockNotifications | |||
| 1.3.6.1.4.1.3902.1082.120.10.3.1 | NodezxAnClockTraps | |||
| 1.3.6.1.4.1.3902.1082.120.10.3.1.1 | NotificationzxAnClockSrcSwitch | current | for clock source switch incident report. reason:1-Abnormal,2-S1Changed,...; OldInfo:active clock source identify before switch; NewInfo:active clock source ide… | |
| 1.3.6.1.4.1.3902.1082.120.10.3.1.2 | NotificationzxAnClockStatusChanged | current | A zxAnClockStatusChanged trap is sent when the agent has detected that the current clock status has been changed to another new clock status. | |
| 1.3.6.1.4.1.3902.1082.120.10.3.1.21 | NotificationzxAnClockEFDAlm | current | Exceeded frequency deviation alarm of clock signal Generate notification. | |
| 1.3.6.1.4.1.3902.1082.120.10.3.1.22 | NotificationzxAnClockEFDClr | current | Clear Exceeded frequency deviation alarm of clock signal. when the clock signal is normal,the alarm is restored. | |
| 1.3.6.1.4.1.3902.1082.120.10.3.1.23 | NotificationzxAnClockNoClkAvailableAlm | current | no available clock source in OLT.Generate notification. | |
| 1.3.6.1.4.1.3902.1082.120.10.3.1.24 | NotificationzxAnClockNoClkAvailableClr | current | Clear no available clock source alarm in OLT. when an available clock source occoured, the alarm is restored. | |
| 1.3.6.1.4.1.3902.1082.120.10.3.1.25 | NotificationzxAnClockLosLofAlm | current | Los Lof alarm of clock signal.Generate notification. | |
| 1.3.6.1.4.1.3902.1082.120.10.3.1.26 | NotificationzxAnClockLosLofClr | current | Clear Los Lof alarm of clock signal.. when the clock signal is normal, the alarm is restored. | |
| 1.3.6.1.4.1.3902.1082.120.10.3.1.27 | NotificationzxAnClockLockOutAlm | current | clock signal is setted lockout.Generate notification. not supported. need further study | |
| 1.3.6.1.4.1.3902.1082.120.10.3.1.28 | NotificationzxAnClockLockOutClr | current | Clear lockout alarm of clock signal. when the clock signal is clear lockout configure, alarm is restored. not supported. need further study | |
| 1.3.6.1.4.1.3902.1082.120.10.3.1.29 | NotificationzxAnClockQlFailAlm | current | Ql Fail alarm of clock signal.Generate notification. | |
| 1.3.6.1.4.1.3902.1082.120.10.3.1.30 | NotificationzxAnClockQlFailClr | current | Clear Ql Fail alarm of clock signal.. when the QL-level is available, alarm is restored. | |
| 1.3.6.1.4.1.3902.1082.120.10.3.1.31 | NotificationzxAnClockLosEsmcAlm | current | Loss of ESMC alarm of clock signal.Generate notification. | |
| 1.3.6.1.4.1.3902.1082.120.10.3.1.32 | NotificationzxAnClockLosEsmcClr | current | Loss of ESMC alarm of clock signal.. when the ESMC normal, alarm is restored. | |
| 1.3.6.1.4.1.3902.1082.120.10.4 | NodezxAnClockConformance | |||
| 1.3.6.1.4.1.3902.1082.120.10.4.1 | NodezxAnClockCompliances | |||
| 1.3.6.1.4.1.3902.1082.120.10.4.1.1 | CompliancezxAnClockCompliance | current | The compliance statement for entities which implement the ZTE-AN-CLOCK-MIB. | |
| 1.3.6.1.4.1.3902.1082.120.10.4.2 | NodezxAnClockGroups | |||
| 1.3.6.1.4.1.3902.1082.120.10.4.2.1 | GroupzxAnClockGlobalGroup | current | A collection of global objects providing clock functions | |
| 1.3.6.1.4.1.3902.1082.120.10.4.2.2 | GroupzxAnClockSrcGroup | current | A collection of objects providing clock source configure functions | |
| 1.3.6.1.4.1.3902.1082.120.10.4.2.3 | GroupzxAnClockSsmGroup | current | A collection of objects providing Esmc&SsmSend functions | |
| 1.3.6.1.4.1.3902.1082.120.10.4.2.4 | GroupzxAnClockAlarmTrapGroup | current | A collection of objects providing clock alarm functions |