ZTE-AN-IEEE1588-MIB
157 objects
The MIB module for the management of IEEE1588 .
Imported Objects
| IF-MIB | ifIndex |
| INET-ADDRESS-MIB | InetAddress InetAddressPrefixLength InetAddressType |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DisplayString MacAddress RowStatus TruthValue |
| ZTE-AN-SMI | zxAnClockSync |
| ZTE-AN-TC-MIB | VlanId |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3902.1082.120.15 | IdentityzxAnIeee1588Mib | The MIB module for the management of IEEE1588 . | ||
| 1.3.6.1.4.1.3902.1082.120.15.1 | NodezxAnIeee1588GlobalObjects | |||
| 1.3.6.1.4.1.3902.1082.120.15.1.1 | ScalarzxAnIeee1588Capabilities | read-only | current | The IEEE1588 capabilities of this equipment. The bit value 1 means the function represented by this bit is supported by this equipment. bit 0: value 1 means th… |
| 1.3.6.1.4.1.3902.1082.120.15.1.11 | NodezxAnIeee1588AlmThreshObjects | |||
| 1.3.6.1.4.1.3902.1082.120.15.1.11.1 | ScalarzxAn1588FreqQLThresh | read-write | current | System frequency quality level threshold. A zxAnAccuracyDegradedAlm alarm will be generated when system frequency quality level is below the following threshol… |
| 1.3.6.1.4.1.3902.1082.120.15.1.11.2 | ScalarzxAnPtpClockTraceClassThresh | read-write | current | PTP clock traceability class threshold. A zxAnPtpClockTCBelowThreshAlm alarm will be generated when PTP traceability clock class is below threshold. |
| 1.3.6.1.4.1.3902.1082.120.15.1.11.3 | ScalarzxAn1ppsInputSignalQLThresh | read-write | current | 1PPS input signal quality level threshold. A zxAn1ppsInSignalQlBelowThreshAlm alarm will be generated when 1PPS input signal quality level of '1PPS+ToD' port i… |
| 1.3.6.1.4.1.3902.1082.120.15.1.12 | NodezxAnIeee1588TimeStatusInfoObjs | |||
| 1.3.6.1.4.1.3902.1082.120.15.1.12.1 | ScalarzxAn1588TimeAccuracyDegradAlmRsn | accessible-for-notify | current | The time accuracy degraded alarm reason. A zxAn1588TimeAccuracyDegradeAlm alarm will be generated because for the following threshold. freqLol(1): frequency lo… |
| 1.3.6.1.4.1.3902.1082.120.15.1.12.2 | ScalarzxAn1588TimeSourceType | read-only | current | The current time source type. none(1): no time source. ptp(2): PTP time source. oneppsPlusTod: 1PPS+ToD time source. |
| 1.3.6.1.4.1.3902.1082.120.15.1.12.3 | ScalarzxAn1588TimeSourceId | read-only | current | The current time source identification. It indicates the PTP time source ID when zxAn1588TimeSourceType is ptp(1). It indicates the 1PPS+ToD time source ID whe… |
| 1.3.6.1.4.1.3902.1082.120.15.1.12.4 | ScalarzxAn1588LocalTimeStatus | read-only | current | The local time status. freeRun(1): the local time has never been synchronized with any time source. synchronizing(2): the local time is synchronizing with a ti… |
| 1.3.6.1.4.1.3902.1082.120.15.1.12.5 | ScalarzxAn1588LocalClockFreqStatus | read-only | current | The local clock frequency status. freerun(1): the local clock frequency is in free-run state. locked(2): the local clock frequency is in locked state. holdover… |
| 1.3.6.1.4.1.3902.1082.120.15.1.12.6 | ScalarzxAn1588LocalClockFreqQltyLvl | read-only | current | The local clock frequency quality level. qlprc(2): quality level of primary reference clock, it is defined in recommendation G.811. 1PPS input signal is in hol… |
| 1.3.6.1.4.1.3902.1082.120.15.1.12.7 | ScalarzxAn1588PtpMessageReceiveStatus | read-only | current | The PTP message receiving status. normal(1): the PTP message receiving status is normal. annocMessageMissed(2): the PTP announcement message is missed. syncMes… |
| 1.3.6.1.4.1.3902.1082.120.15.1.12.8 | ScalarzxAn1588LastTimeSourceType | read-only | current | The last time source type. none(1): no time source. ptp(2): PTP time source. oneppsPlusTod: 1PPS+ToD time source. |
| 1.3.6.1.4.1.3902.1082.120.15.1.12.9 | ScalarzxAn1588LastTimeSourceId | read-only | current | The last time source identification. It indicates the PTP time source ID when zxAn1588TimeSourceType is ptp(1). It indicates the 1PPS+ToD time source ID when z… |
| 1.3.6.1.4.1.3902.1082.120.15.1.12.10 | ScalarzxAn1588LocalUtcTime | read-only | current | The UTC time of Local clock. The format is yyyy-mm-dd HH:MM:SS.For example, 2001-01-01 02:22:33. |
| 1.3.6.1.4.1.3902.1082.120.15.1.12.11 | ScalarzxAn1588LastLocalTimeStatus | read-only | current | The last local time status. freeRun(1): the local time has never been synchronized with any time source. synchronizing(2): the local time is synchronizing with… |
| 1.3.6.1.4.1.3902.1082.120.15.1.13 | NodezxAnIeee1588TimeStatusConfObjs | |||
| 1.3.6.1.4.1.3902.1082.120.15.1.13.1 | ScalarzxAnIeee1588TimeStatusDftPri1 | read-write | current | The default value of priority 1 delivered to PTP master. This value will be used when OLT is in holdover state. |
| 1.3.6.1.4.1.3902.1082.120.15.1.13.2 | ScalarzxAnIeee1588TimeStatusDftPri2 | read-write | current | The default value of priority 2 delivered to PTP master, This value will be used when OLT is in holdover state. |
| 1.3.6.1.4.1.3902.1082.120.15.1.13.3 | ScalarzxAnIeee1588TimeStatusDftClkCls | read-write | current | The default value of clock class delivered to PTP master, This value will be used when OLT is in holdover state. |
| 1.3.6.1.4.1.3902.1082.120.15.2 | NodezxAnIeee1588Objects | |||
| 1.3.6.1.4.1.3902.1082.120.15.2.1 | NodezxAnIeee1588PtpObjects | |||
| 1.3.6.1.4.1.3902.1082.120.15.2.1.1 | NodezxAnIeee1588PtpGlobalObjects | |||
| 1.3.6.1.4.1.3902.1082.120.15.2.1.1.1 | NodezxAnPtpMasterObjects | |||
| 1.3.6.1.4.1.3902.1082.120.15.2.1.1.1.1 | ScalarzxAnPtpMstDomainId | read-only | current | The domain identification of the master. It is a logic number and the range is from 0 to 255, the value 0 indicates the default domain. |
| 1.3.6.1.4.1.3902.1082.120.15.2.1.1.1.2 | ScalarzxAnPtpMstIsLeap59 | read-only | current | In PTP systems whose epoch is the PTP epoch, the value 'yes' indicates that the last minute of the current UTC day contains 59 seconds, the value 'no' indicate… |
| 1.3.6.1.4.1.3902.1082.120.15.2.1.1.1.3 | ScalarzxAnPtpMstIsLeap61 | read-only | current | In PTP systems whose epoch is the PTP epoch, the value 'yes' indicates that the last minute of the current UTC day contains 61 seconds, the value 'no' indicate… |
| 1.3.6.1.4.1.3902.1082.120.15.2.1.1.1.4 | ScalarzxAnPtpMstIsTimeTraceable | read-only | current | The value 'yes' indicates that the current UTC offset can be traced to a primary reference and 'no' otherwise. |
| 1.3.6.1.4.1.3902.1082.120.15.2.1.1.1.5 | ScalarzxAnPtpMstIsFreqTraceable | read-only | current | The value 'yes' indicates that the time frequency can be traced to a primary reference and 'no' otherwise. |
| 1.3.6.1.4.1.3902.1082.120.15.2.1.1.1.6 | ScalarzxAnPtpMstIsUtcOffsetValid | read-only | current | The value 'yes' indicates that the current UTC offset is known to be valid and 'no' otherwise. |
| 1.3.6.1.4.1.3902.1082.120.15.2.1.1.1.7 | ScalarzxAnPtpMstCurrentUtcOffset | read-only | current | The current UTC offset between TAI(International Atomic Time) and UTC. |
| 1.3.6.1.4.1.3902.1082.120.15.2.1.1.1.8 | ScalarzxAnPtpMstClockId | read-only | current | The master clock identity. This attribute value is hexadecimal data. |
| 1.3.6.1.4.1.3902.1082.120.15.2.1.1.1.9 | ScalarzxAnPtpMstGrdmstClockId | read-only | current | The grandmaster clock identity. This attribute value is hexadecimal data. |
| 1.3.6.1.4.1.3902.1082.120.15.2.1.1.1.10 | ScalarzxAnPtpMstGrdmstIsPtpTimescale | read-only | current | The value 'yes' indicates that the clock timescale of the grandmaster clock is PTP and 'no' otherwise. |
| 1.3.6.1.4.1.3902.1082.120.15.2.1.1.1.11 | ScalarzxAnPtpMstGrdmstPriority1 | read-only | current | The grandmaster clock priority 1. The value 0 indicates the highest priority. |
| 1.3.6.1.4.1.3902.1082.120.15.2.1.1.1.12 | ScalarzxAnPtpMstGrdmstPriority2 | read-only | current | The grandmaster clock priority 2. The value 0 indicates the highest priority. |
| 1.3.6.1.4.1.3902.1082.120.15.2.1.1.1.13 | ScalarzxAnPtpMstGrdmstClockTraceClass | read-only | current | The grandmaster clock traceability class of the time or frequency distributed. The value 0 indicates the best traceability class. |
| 1.3.6.1.4.1.3902.1082.120.15.2.1.1.1.14 | ScalarzxAnPtpMstGrdmstClockAccuracy | read-only | current | The grandmaster clock accuracy. The value 0 indicates the highest clock accuracy. |
| 1.3.6.1.4.1.3902.1082.120.15.2.1.1.1.15 | ScalarzxAnPtpMstGrdmstClockOslv | read-only | current | The grandmaster clock offset scaled log variance. It is computed based on the theory of Allan deviation. |
| 1.3.6.1.4.1.3902.1082.120.15.2.1.1.1.16 | ScalarzxAnPtpMstGrdmstTraversedClocks | read-only | current | The clocks traversed between the local clock and the grandmaster clock. |
| 1.3.6.1.4.1.3902.1082.120.15.2.1.1.1.17 | ScalarzxAnPtpMstGrdmstTimeSource | read-only | current | The source of time used by the grandmaster clock. |
| 1.3.6.1.4.1.3902.1082.120.15.2.1.1.1.18 | ScalarzxAnPtpMstSourcePortLocation | read-only | current | The source port location. uplinkCard(1): it means that the PTP master source port is located at the uplink card. masterControlCard(2): it means that the PTP ma… |
| 1.3.6.1.4.1.3902.1082.120.15.2.1.7 | TablezxAnPtpIfConfTable | not-accessible | current | The IEEE 1588 PTP port table. |
| 1.3.6.1.4.1.3902.1082.120.15.2.1.7.1 | RowzxAnPtpIfConfEntry | not-accessible | current | The IEEE 1588 PTP port entry. |
| 1.3.6.1.4.1.3902.1082.120.15.2.1.7.1.1 | ColumnzxAnPtpIfConfClockId | read-only | current | The PTP port clock identity. This attribute value is hexadecimal data. |
| 1.3.6.1.4.1.3902.1082.120.15.2.1.7.1.2 | ColumnzxAnPtpIfConfNumber | read-only | current | The PTP port number. |
| 1.3.6.1.4.1.3902.1082.120.15.2.1.7.1.3 | ColumnzxAnPtpIfConfState | read-only | current | The PTP port state. |
| 1.3.6.1.4.1.3902.1082.120.15.2.1.7.1.4 | ColumnzxAnPtpIfConfMinDelayReqInterval | read-only | current | The minimum interval between successive Delay_Req messages. us31250 means interval 2**(-5)s us62500 means interval 2**(-4)s us125000 means interval 2**(-3)s us… |
| 1.3.6.1.4.1.3902.1082.120.15.2.1.7.1.6 | ColumnzxAnPtpIfConfAnnounceInterval | read-create | current | The interval between successive Announce messages. us31250 means interval 2**(-5)s us62500 means interval 2**(-4)s us125000 means interval 2**(-3)s us250000 me… |
| 1.3.6.1.4.1.3902.1082.120.15.2.1.7.1.7 | ColumnzxAnPtpIfConfMaxLossAnnounceMsgs | read-create | current | The maximum number of Announce messages loss. |
| 1.3.6.1.4.1.3902.1082.120.15.2.1.7.1.8 | ColumnzxAnPtpIfConfSyncInterval | read-create | current | The interval between successive synchronization messages. us31250 means interval 2**(-5)s us62500 means interval 2**(-4)s us125000 means interval 2**(-3)s us25… |
| 1.3.6.1.4.1.3902.1082.120.15.2.1.7.1.13 | ColumnzxAnPtpIfConfLocalPriority | read-create | current | The PTP port local priority. |
| 1.3.6.1.4.1.3902.1082.120.15.2.1.7.1.21 | ColumnzxAnPtpIfConfPtpMsgProtocolType | read-create | current | The PTP message protocol type. ipv4(1): it means the PTP messages is IPv4 protocol. ethernet(2): it means the PTP messages is Ethernet protocol. |
| 1.3.6.1.4.1.3902.1082.120.15.2.1.7.1.22 | ColumnzxAnPtpIfConfAddressType | read-create | current | The PTP port address type. multicast(1): it means the PTP port address type is multicast. unicast(2): it means the PTP port address type is unicast. |
| 1.3.6.1.4.1.3902.1082.120.15.2.1.7.1.23 | ColumnzxAnPtpIfConfMsgForwardOption | read-create | current | The PTP message forwarding option. forwardable(1): it means the PTP messages is preferable to forward the PTP messages through the PTP port. nonforwardable(2):… |
| 1.3.6.1.4.1.3902.1082.120.15.2.1.7.1.24 | ColumnzxAnPtpIfConfDelayCompensation | read-create | current | The PTP port delay compensation. |
| 1.3.6.1.4.1.3902.1082.120.15.2.1.7.1.25 | ColumnzxAnPtpIfConfAdminStatus | read-create | current | The PTP port administrative status. Enables or disables the PTP port. |
| 1.3.6.1.4.1.3902.1082.120.15.2.1.7.1.50 | ColumnzxAnPtpIfConfRowStatus | read-create | current | The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager mu… |
| 1.3.6.1.4.1.3902.1082.120.15.2.1.20 | NodezxAnPtpProfileObjects | |||
| 1.3.6.1.4.1.3902.1082.120.15.2.1.20.1 | NodezxAnPtpProfileGlobalObjects | |||
| 1.3.6.1.4.1.3902.1082.120.15.2.1.20.1.1 | ScalarzxAnPtpPrfSystemPtpPrf | read-write | current | The system PTP profile name. Refers to 'zxAnPtpPrfName'. An empty string indicates no binding any profile. |
| 1.3.6.1.4.1.3902.1082.120.15.2.1.20.2 | TablezxAnPtpPrfTable | not-accessible | current | The IEEE 1588 PTP profile table. |
| 1.3.6.1.4.1.3902.1082.120.15.2.1.20.2.1 | RowzxAnPtpPrfEntry | not-accessible | current | The IEEE 1588 PTP profile entry. |
| 1.3.6.1.4.1.3902.1082.120.15.2.1.20.2.1.1 | ColumnzxAnPtpPrfName | not-accessible | current | The PTP profile name. |
| 1.3.6.1.4.1.3902.1082.120.15.2.1.20.2.1.3 | ColumnzxAnPtpPrfPriority2 | read-create | current | The PTP priority 2. The value 0 indicates the highest priority. |
| 1.3.6.1.4.1.3902.1082.120.15.2.1.20.2.1.4 | ColumnzxAnPtpPrfDomainNumber | read-create | current | The PTP domain number. |
| 1.3.6.1.4.1.3902.1082.120.15.2.1.20.2.1.5 | ColumnzxAnPtpPrfLocalPriority | read-create | current | The PTP local priority. The value 1 indicates the highest priority. |
| 1.3.6.1.4.1.3902.1082.120.15.2.1.20.2.1.6 | ColumnzxAnPtpPrfMaxStepsRemoved | read-create | current | The PTP maximum steps removed. The parameter is defined in [IEEE1588] is used to indicate the distance between a clock and the grandmaster clock in the network… |
| 1.3.6.1.4.1.3902.1082.120.15.2.1.20.2.1.7 | ColumnzxAnPtpPrfBmcaOption | read-create | current | The PTP BMCA (best master clock algorithm) option. g82751(1): BMCA complies with G.8275.1. ieee1588(2): BMCA complies with IEEE 1588. |
| 1.3.6.1.4.1.3902.1082.120.15.2.1.20.2.1.8 | ColumnzxAnPtpPrfTraceOption | read-create | current | The PTP trace option. g82751(1): PTP trace complies with G.8275.1. g82751note3(2): PTP trace complies with G.8275.1 note 3. ieee1588(3): PTP trace complies wit… |
| 1.3.6.1.4.1.3902.1082.120.15.2.1.20.2.1.9 | ColumnzxAnPtpPrfHoldoverInTimeout | read-create | current | The holdover-in timeout. The value 0 indicates that the system clock do not enter into the holdover-in status. |
| 1.3.6.1.4.1.3902.1082.120.15.2.1.20.2.1.50 | ColumnzxAnPtpPrfRowStatus | read-create | current | The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager mu… |
| 1.3.6.1.4.1.3902.1082.120.15.2.1.25 | NodezxAnPtpStatsObjects | |||
| 1.3.6.1.4.1.3902.1082.120.15.2.1.25.2 | TablezxAnPtpIfStatsTable | not-accessible | current | The IEEE 1588 PTP port statistics table. |
| 1.3.6.1.4.1.3902.1082.120.15.2.1.25.2.1 | RowzxAnPtpIfStatsEntry | not-accessible | current | The IEEE 1588 PTP port statistics entry. |
| 1.3.6.1.4.1.3902.1082.120.15.2.1.25.2.1.1 | ColumnzxAnPtpIfStatsAnnounceMsgs | read-only | current | The number of PTP announce messages. |
| 1.3.6.1.4.1.3902.1082.120.15.2.1.25.2.1.2 | ColumnzxAnPtpIfStatsSyncMsgs | read-only | current | The number of PTP synchronization messages. |
| 1.3.6.1.4.1.3902.1082.120.15.2.1.25.2.1.3 | ColumnzxAnPtpIfStatsDelayReqMsgs | read-only | current | The number of PTP delay_req messages. |
| 1.3.6.1.4.1.3902.1082.120.15.2.1.25.2.1.4 | ColumnzxAnPtpIfStatsDelayRespMsgs | read-only | current | The number of PTP delay_resp messages. |
| 1.3.6.1.4.1.3902.1082.120.15.2.1.25.2.1.5 | ColumnzxAnPtpIfStatsFollowUpMsgs | read-only | current | The number of PTP follow_up messages. |
| 1.3.6.1.4.1.3902.1082.120.15.2.2 | NodezxAnIeee15881ppsObjects | |||
| 1.3.6.1.4.1.3902.1082.120.15.2.2.3 | TablezxAnSyncTime1ppsSrcTable | not-accessible | current | This table includes 1PPS source information in NE equipment. |
| 1.3.6.1.4.1.3902.1082.120.15.2.2.3.1 | RowzxAnSyncTime1ppsSrcEntry | not-accessible | current | An entry in zxAnSyncTime1ppsSrcTable. to create a 1pps source,it must comply with the multi-variables usage rule - all the mib variables related to same fuctio… |
| 1.3.6.1.4.1.3902.1082.120.15.2.2.3.1.1 | ColumnzxAnSyncTime1ppsSrcId | not-accessible | current | This '1PPS+ToD' source id. |
| 1.3.6.1.4.1.3902.1082.120.15.2.2.3.1.2 | ColumnzxAnSyncTime1ppsSrcRack | read-create | current | This object indicates the rack number. |
| 1.3.6.1.4.1.3902.1082.120.15.2.2.3.1.3 | ColumnzxAnSyncTime1ppsSrcShelf | read-create | current | This object indicates the shelf number. |
| 1.3.6.1.4.1.3902.1082.120.15.2.2.3.1.4 | ColumnzxAnSyncTime1ppsSrcSlot | read-create | current | This object indicates the slot number. Only support time card, such as cick. |
| 1.3.6.1.4.1.3902.1082.120.15.2.2.3.1.5 | ColumnzxAnSyncTime1ppsSrcFirstPtp | read-create | current | The PTP node provided '1PPS+ToD' siginal is the first node of this slot or not. |
| 1.3.6.1.4.1.3902.1082.120.15.2.2.3.1.6 | ColumnzxAnSyncTime1ppsSrcSignalType | read-create | current | The type of '1PPS+ToD' signal source. ptp(1) : 1PPS come from PTP onepps(2) : 1PPS come from physical 1pps port |
| 1.3.6.1.4.1.3902.1082.120.15.2.2.3.1.7 | ColumnzxAnSyncTime1ppsSrcPriority | read-create | current | The priority of '1PPS+ToD' signal source, value 1 is the highest priority. |
| 1.3.6.1.4.1.3902.1082.120.15.2.2.3.1.8 | ColumnzxAnSyncTime1ppsSrcPortType | read-create | current | The '1PPS+ToD' signal source port type. It is valid only for the 'onepps' signal type. typeTtl(1) : physical port type TTL type422(2) : from physical port as R… |
| 1.3.6.1.4.1.3902.1082.120.15.2.2.3.1.9 | ColumnzxAnSyncTime1ppsSrcPort | read-create | current | The physical port number. It is valid only for the 'onepps' signal type. |
| 1.3.6.1.4.1.3902.1082.120.15.2.2.3.1.10 | ColumnzxAnSyncTime1ppsSrcWorkStatus | read-only | current | The '1PPS+ToD' signal source work status, none(1) : indicates PTP source is invalid. active(2) : indicates PTP source is active, standby(3) : indicates PTP sou… |
| 1.3.6.1.4.1.3902.1082.120.15.2.2.3.1.11 | ColumnzxAnSyncTime1ppsSrcValidStatus | read-only | current | The '1PPS+ToD' singnal source work status. valid(1) : indicates the 1PPS signal is valid invalid(2): indicates the 1PPS signal is invalid When the value is inv… |
| 1.3.6.1.4.1.3902.1082.120.15.2.2.3.1.12 | ColumnzxAnSyncTime1ppsSrcPortStatus | read-only | current | The '1PPS+ToD' signal source port status. It is valid only for the 'onepps' signal type. If zxAnSyncTime1ppsSrcSignalType is 'ptp', then the value is none. Whe… |
| 1.3.6.1.4.1.3902.1082.120.15.2.2.3.1.13 | ColumnzxAnSyncTime1ppsSrcFormat | read-only | current | The '1PPS+ToD' singnal source format. unknown(1): it indicates the '1PPS+ToD' signal source format is unknown. gpzda(2): it indicates the '1PPS+ToD' signal sou… |
| 1.3.6.1.4.1.3902.1082.120.15.2.2.3.1.14 | ColumnzxAnSyncTime1ppsSrcCurrentQL | read-only | current | The '1PPS+ToD' singnal source current quality level. locked(1): 1PPS input signal source is locked with grandmaster at this time. qlprc(2): quality level of pr… |
| 1.3.6.1.4.1.3902.1082.120.15.2.2.3.1.15 | ColumnzxAnSyncTime1ppsSrcTimeAccuracy | read-only | current | The '1PPS+ToD' singnal source time accuracy, value 0 indicates the highest accuracy. |
| 1.3.6.1.4.1.3902.1082.120.15.2.2.3.1.16 | ColumnzxAnSyncTime1ppsSrcTimeSrcType | read-only | current | The '1PPS+ToD' singnal source time source type. bds(1): the time source type is beidou bavigation satellite system. gps(2): the time source type is global posi… |
| 1.3.6.1.4.1.3902.1082.120.15.2.2.3.1.17 | ColumnzxAnSyncTime1ppsSrcDlyCompensate | read-create | current | The '1PPS+ToD' delay compensation. |
| 1.3.6.1.4.1.3902.1082.120.15.2.2.3.1.30 | ColumnzxAnSyncTime1ppsSrcRowStatus | read-create | current | The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager mu… |
| 1.3.6.1.4.1.3902.1082.120.15.2.2.4 | TablezxAnSyncTimeTodSrcTable | not-accessible | current | This table includes TOD source information in NE equipment. |
| 1.3.6.1.4.1.3902.1082.120.15.2.2.4.1 | RowzxAnSyncTimeTodSrcEntry | not-accessible | current | An entry in zxAnSyncTimeTodSrcTable. to create a TOD source,it must comply with the multi-variables usage rule - all the mib variables related to same fuction … |
| 1.3.6.1.4.1.3902.1082.120.15.2.2.4.1.1 | ColumnzxAnSyncTimeTodSrcId | not-accessible | current | This tod source id. |
| 1.3.6.1.4.1.3902.1082.120.15.2.2.4.1.2 | ColumnzxAnSyncTimeTodSrcRack | read-create | current | This object indicates the rack number. |
| 1.3.6.1.4.1.3902.1082.120.15.2.2.4.1.3 | ColumnzxAnSyncTimeTodSrcShelf | read-create | current | This object indicates the shelf number. |
| 1.3.6.1.4.1.3902.1082.120.15.2.2.4.1.4 | ColumnzxAnSyncTimeTodSrcSlot | read-create | current | This object indicates the slot number. Only support time card, such as cick. |
| 1.3.6.1.4.1.3902.1082.120.15.2.2.4.1.5 | ColumnzxAnSyncTimeTodSrcPort | read-create | current | This object indicates the port number. |
| 1.3.6.1.4.1.3902.1082.120.15.2.2.4.1.6 | ColumnzxAnSyncTimeTodSrcSignalType | read-create | current | The signal type of TOD signal source. gps(1) : GPS TOD form chinaMobile(2) : China Mobile Telecom's TOD form chinaUnicom(3) : China Unicom Telecom's TOD form c… |
| 1.3.6.1.4.1.3902.1082.120.15.2.2.4.1.7 | ColumnzxAnSyncTimeTodSrcYearAdjust | read-create | current | The year adjustment value of TOD signal source. It is valid only for the 'gps' signal type. |
| 1.3.6.1.4.1.3902.1082.120.15.2.2.4.1.8 | ColumnzxAnSyncTimeTodSrcPortStatus | read-only | current | The TOD signal source port status. none(1) : none normal(2) : no alarm signalLos(3) : Loss of TOD |
| 1.3.6.1.4.1.3902.1082.120.15.2.2.4.1.30 | ColumnzxAnSyncTimeTodSrcRowStatus | read-create | current | The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager mu… |
| 1.3.6.1.4.1.3902.1082.120.15.2.2.5 | TablezxAnSyncTimeOutputPortTable | not-accessible | current | This table includes 1PPS and TOD signal output ports information in NE equipment. |
| 1.3.6.1.4.1.3902.1082.120.15.2.2.5.1 | RowzxAnSyncTimeOutputPortEntry | not-accessible | current | An entry in zxAnSyncTimeOutputPortTable. to create a TOD output,it must comply with the multi-variables usage rule - all the mib variables related to same fuct… |
| 1.3.6.1.4.1.3902.1082.120.15.2.2.5.1.1 | ColumnzxAnSyncTimeOutputId | not-accessible | current | This time output id. |
| 1.3.6.1.4.1.3902.1082.120.15.2.2.5.1.2 | ColumnzxAnSyncTimeOutputRack | read-create | current | This object indicates the rack number. |
| 1.3.6.1.4.1.3902.1082.120.15.2.2.5.1.3 | ColumnzxAnSyncTimeOutputShelf | read-create | current | This object indicates the shelf number. |
| 1.3.6.1.4.1.3902.1082.120.15.2.2.5.1.4 | ColumnzxAnSyncTimeOutputSlot | read-create | current | This object indicates the slot number. Only support pon card. |
| 1.3.6.1.4.1.3902.1082.120.15.2.2.5.1.5 | ColumnzxAnSyncTimeOutputPort | read-create | current | This object indicates the port number. |
| 1.3.6.1.4.1.3902.1082.120.15.2.2.5.1.6 | ColumnzxAnSyncTimeOutputPortEnable | read-create | current | Enables or disables the output port of 1PPS and TOD signal. enable(1) : enable disable(2): disable |
| 1.3.6.1.4.1.3902.1082.120.15.2.2.5.1.7 | ColumnzxAnSyncTimeOutputPortPhaseAdjus | read-create | current | The phase adjustment value. It is valid only for the 1PPS signal. |
| 1.3.6.1.4.1.3902.1082.120.15.2.2.5.1.30 | ColumnzxAnSyncTimeOutputPortRowStatus | read-create | current | The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager mu… |
| 1.3.6.1.4.1.3902.1082.120.15.3 | NodezxAnIeee1588Notifications | |||
| 1.3.6.1.4.1.3902.1082.120.15.3.1 | NodezxAnIeee1588GlobalTraps | |||
| 1.3.6.1.4.1.3902.1082.120.15.3.1.1 | NotificationzxAn1588TimeAccuracyDegradeAlm | current | A zxAnAccuracyDegradedAlm trap is sent when the agent has detected that the time accuracy has been degraded. | |
| 1.3.6.1.4.1.3902.1082.120.15.3.1.2 | NotificationzxAn1588TimeAccuracyDegradeClr | current | A zxAn1588TimeAccuracyDegradeClr trap is sent when the agent has detected that the time accuracy has come into the accurate status. | |
| 1.3.6.1.4.1.3902.1082.120.15.3.1.3 | NotificationzxAn1588TimeSourceChanged | current | A zxAn1588TimeSourceChanged trap is sent when the agent has detected that the current time source of IEEE1588 device has been changed to another new time sourc… | |
| 1.3.6.1.4.1.3902.1082.120.15.3.1.4 | NotificationzxAn1588LocalTimeStatusChanged | current | A zxAn1588LocalTimeStatusChanged trap is sent when the agent has detected that the current time status of IEEE1588 device has been changed to another new time … | |
| 1.3.6.1.4.1.3902.1082.120.15.3.2 | NodezxAnIeee1588PtpTraps | |||
| 1.3.6.1.4.1.3902.1082.120.15.3.2.1 | NotificationzxAnPtpNeverSyncAlm | current | A zxAnPtpNeverSyncAlm trap is sent when the agent has detected that the PTP clock has never been synchronized with a time source. | |
| 1.3.6.1.4.1.3902.1082.120.15.3.2.2 | NotificationzxAnPtpNeverSyncClr | current | A zxAnPtpNeverSyncClr trap is sent when the agent has detected that the PTP clock has been synchronized with a time source. | |
| 1.3.6.1.4.1.3902.1082.120.15.3.2.3 | NotificationzxAnPtpLolAlm | current | A zxAnPtpLolAlm trap is sent when the agent has detected that the PTP clock was in the loss of lock status. | |
| 1.3.6.1.4.1.3902.1082.120.15.3.2.4 | NotificationzxAnPtpLolClr | current | A zxAnPtpLolClr trap is sent when the agent has detected that the PTP clock has been locked again. | |
| 1.3.6.1.4.1.3902.1082.120.15.3.2.5 | NotificationzxAnPtpClockTCBelowThreshAlm | current | A zxAnPtpClockTCBelowThreshAlm trap is sent when the agent has detected that the PTP clock traceability class has been below zxAnPtpClockTraceClassThresh thres… | |
| 1.3.6.1.4.1.3902.1082.120.15.3.2.6 | NotificationzxAnPtpClockTCBelowThreshClr | current | A zxAnPtpClockTCBelowThreshClr trap is sent when the agent has detected that the PTP clock traceability class has not been below zxAnPtpClockTraceClassThresh t… | |
| 1.3.6.1.4.1.3902.1082.120.15.3.2.7 | NotificationzxAnPtpAnnounceMsgLostAlm | current | A zxAnPtpAnnounceMsgLostAlm trap is sent when the agent has detected that the announce messages lost. | |
| 1.3.6.1.4.1.3902.1082.120.15.3.2.8 | NotificationzxAnPtpAnnounceMsgLostClr | current | A zxAnPtpAnnounceMsgLostClr trap is sent when the agent has detected that the announce messages are received again. | |
| 1.3.6.1.4.1.3902.1082.120.15.3.3 | NodezxAnIeee15881ppsTraps | |||
| 1.3.6.1.4.1.3902.1082.120.15.3.3.1 | NotificationzxAn1ppsPlusTodLosAlm | current | A zxAn1ppsPlusTodLosAlm trap is sent when the agent has detected that the '1PPS+ToD' port was in the loss of signal status. | |
| 1.3.6.1.4.1.3902.1082.120.15.3.3.2 | NotificationzxAn1ppsPlusTodLosClr | current | A zxAn1ppsPlusTodLosClr trap is sent when the agent has detected that the '1PPS+ToD' port has restored signal. | |
| 1.3.6.1.4.1.3902.1082.120.15.3.3.3 | NotificationzxAn1ppsInSignalQlBelowThreshAlm | current | A zxAn1ppsInSignalQlBelowThreshAlm trap is sent when the agent has detected that the 1PPS input signal quality level of '1PPS+ToD' port has been below zxAn1pps… | |
| 1.3.6.1.4.1.3902.1082.120.15.3.3.4 | NotificationzxAn1ppsInSignalQlBelowThreshClr | current | A zxAn1ppsInSignalQlBelowThreshClr trap is sent when the agent has detected that the 1PPS input signal quality level of '1PPS+ToD' port has not been below zxAn… | |
| 1.3.6.1.4.1.3902.1082.120.15.4 | NodezxAnIeee1588Conformance | |||
| 1.3.6.1.4.1.3902.1082.120.15.4.1 | NodezxAnIeee1588Compliances | |||
| 1.3.6.1.4.1.3902.1082.120.15.4.1.1 | CompliancezxAnIeee1588Compliance | current | The compliance statement for entities which implement the Zte An IEEE1588 MIB. Implementation of this MIB is based on individual product needs. | |
| 1.3.6.1.4.1.3902.1082.120.15.4.2 | NodezxAnIeee1588Groups | |||
| 1.3.6.1.4.1.3902.1082.120.15.4.2.1 | GroupzxAnIeee1588PtpPrfObjectsGroup | current | A collection of objects providing IEEE1588 functions. | |
| 1.3.6.1.4.1.3902.1082.120.15.4.2.2 | GroupzxAnIeee1588PtpIfObjectsGroup | current | A collection of objects providing IEEE1588 port functions. | |
| 1.3.6.1.4.1.3902.1082.120.15.4.2.3 | GroupzxAnIeee15881ppsObjectsGroup | current | A collection of global objects providing 1PPS functions. | |
| 1.3.6.1.4.1.3902.1082.120.15.4.2.4 | GroupzxAnIeee1588PtpMstInfoGroup | current | A collection of objects providing PTP master information. | |
| 1.3.6.1.4.1.3902.1082.120.15.4.2.5 | GroupzxAnIeee1588TimeStatusGroup | current | A collection of objects providing time status information. | |
| 1.3.6.1.4.1.3902.1082.120.15.4.2.6 | GroupzxAnIeee1588PktStatsGroup | current | A collection of objects providing packets statistics. | |
| 1.3.6.1.4.1.3902.1082.120.15.4.2.7 | GroupzxAnIeee1588AlmThreshGroup | current | A collection of objects providing alarm thresholds. | |
| 1.3.6.1.4.1.3902.1082.120.15.4.2.8 | GroupzxAnIeee1588AlmTrapGroup | current | A collection of objects providing 1588 alarm functions |