ZTE-AN-LOOPBACKDETECT-MIB
28 objects
This MIB defines managed objects of ZTE loopback detection management.
Imported Objects
| IF-MIB | ifIndex |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| ZTE-AN-IF-MIB | zxAnSubIfIndex |
| ZTE-AN-SMI | zxAnOam |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3902.1082.80.20 | IdentityzxAnLoopbackDetectMib | This MIB defines managed objects of ZTE loopback detection management. | ||
| 1.3.6.1.4.1.3902.1082.80.20.1 | NodezxAnLoopbackDetectGlobalObjects | |||
| 1.3.6.1.4.1.3902.1082.80.20.1.1 | ScalarzxAnLoopbackDetectGlobalEnable | read-write | current | The global switch of loopback detection function. enabled(1) means the global switch is on, disabled(2) means the global switch is off. |
| 1.3.6.1.4.1.3902.1082.80.20.1.2 | ScalarzxAnLoopbackDetectIfShutdown | read-write | current | Indicate whether shutdown the upstream flow of the interface which is loopbackd. enabled(1) means shutdown. disabled(2) means not shutdown. |
| 1.3.6.1.4.1.3902.1082.80.20.1.3 | ScalarzxAnLoopbackDetectRechkInterval | read-write | current | If a interface is loopbackd, the systerm will start the rechecking mechanism. This object indicates the recheck interval. |
| 1.3.6.1.4.1.3902.1082.80.20.1.4 | ScalarzxAnLoopbackDetectActiveEnable | read-write | current | The global switch of the active loopback detection function. enabled(1) means the switch is on, disabled(2) means the switch is off. For C600 Series, the defau… |
| 1.3.6.1.4.1.3902.1082.80.20.1.5 | ScalarzxAnLoopbackDetectActiveInterval | read-write | current | The interval of the active loopback detection. For C600 Series, the default value is 30. For non-C600 Series, the default value is 120. |
| 1.3.6.1.4.1.3902.1082.80.20.1.6 | ScalarzxAnLoopbackSelfLoopCheckEthType | read-write | current | The ethernet type of the self-loop detection packet. It is only defined for C600 series. |
| 1.3.6.1.4.1.3902.1082.80.20.2 | NodezxAnLoopbackDetectObjects | |||
| 1.3.6.1.4.1.3902.1082.80.20.2.2 | TablezxAnLoopbackDetectIfConfTable | not-accessible | current | This table represents the interface loopback detection configuration. |
| 1.3.6.1.4.1.3902.1082.80.20.2.2.1 | RowzxAnLoopbackDetectIfConfEntry | not-accessible | current | An entry in zxAnLoopbackDetectIfConfTable. Only physical port can be configured. |
| 1.3.6.1.4.1.3902.1082.80.20.2.2.1.1 | ColumnzxAnLoopbackDetectIfEnable | read-write | current | Indicate the interface switch of loopback detection function. enabled(1) means the interface switch is on, disabled(2) means the interface switch is off. For n… |
| 1.3.6.1.4.1.3902.1082.80.20.2.2.1.2 | ColumnzxAnLoopbackDetectIfActiveEnable | read-write | current | Indicate the interface switch of the active loopback detection function. enabled(1) means the switch is on, disabled(2) means the switch is off. For C600 serie… |
| 1.3.6.1.4.1.3902.1082.80.20.2.2.1.3 | ColumnzxAnLoopbackDetectIfStartVid | read-write | current | The starting VLAN ID of the active loopback detection. A value of '65535' means that the starting VLAN ID is not configured. |
| 1.3.6.1.4.1.3902.1082.80.20.2.2.1.4 | ColumnzxAnLoopbackDetectIfEndVid | read-write | current | The ending VLAN ID of the active loopback detection. A value of '65535' means that the ending VLAN ID is not configured. zxAnLoopbackDetectIfEndVid must be gre… |
| 1.3.6.1.4.1.3902.1082.80.20.2.2.1.5 | ColumnzxAnLoopbackDetectIfConfMode | read-write | current | The configured loopback detection mode. autoDetection means the loopback detection VLAN ID is specified by the VLAN translation configuration in user-side and … |
| 1.3.6.1.4.1.3902.1082.80.20.2.3 | TablezxAnLoopbackDetectIfStatusTable | not-accessible | current | This table represents the loopbacked interfaces. |
| 1.3.6.1.4.1.3902.1082.80.20.2.3.1 | RowzxAnLoopbackDetectIfStatusEntry | not-accessible | current | An entry in zxAnLoopbackDetectIfStatusTable. |
| 1.3.6.1.4.1.3902.1082.80.20.2.3.1.1 | ColumnzxAnLoopbackDetectVid | read-only | current | Indicate the VLAN ID when the interface is loopbackd. |
| 1.3.6.1.4.1.3902.1082.80.20.2.3.1.2 | ColumnzxAnLoopbackDetectIfStatus | read-only | current | Indicate the interface status when the interface is loopbackd: loopbacked(1) means the interface is loopbacked, interfaceShutdown(2) means the interface is loo… |
| 1.3.6.1.4.1.3902.1082.80.20.2.4 | TablezxAnLoopbackManualDetectIfTable | not-accessible | current | This table provides the parameters to start an interface manual loopback detection. The parameters cann't be read after starting the detection. |
| 1.3.6.1.4.1.3902.1082.80.20.2.4.1 | RowzxAnLoopbackManualDetectIfEntry | not-accessible | current | An entry in zxAnLoopbackManualDetectIfTable. |
| 1.3.6.1.4.1.3902.1082.80.20.2.4.1.1 | ColumnzxAnLoopbackManualDetectIfAction | read-write | current | The interface manual loopback detection action. |
| 1.3.6.1.4.1.3902.1082.80.20.2.4.1.2 | ColumnzxAnLoopbackManualDetectIfVid | read-write | current | The VLAN ID of the interface manual loopback detection. A value of '65535' means that the VLAN ID is not configured. |
| 1.3.6.1.4.1.3902.1082.80.20.2.4.1.3 | ColumnzxAnLoopbackManualDetectIfPkts | read-write | current | The packet number of the interface manual loopback detection. |
| 1.3.6.1.4.1.3902.1082.80.20.3 | NodezxAnLoopbackDetectNotifications | |||
| 1.3.6.1.4.1.3902.1082.80.20.3.1 | NotificationzxAnIfLoopbackedAlm | current | A zxAnIfLoopbackedAlm trap is sent when the interface is loopbacked. | |
| 1.3.6.1.4.1.3902.1082.80.20.3.2 | NotificationzxAnIfLoopbackedClr | current | A zxAnIfLoopbackedClr trap is sent when the interface's loopback has been cleared. |