ZTE-AN-OPTICAL-MODULE-MIB
114 objects
This MIB defines zte Access Node managed objects.
Imported Objects
| IF-MIB | ifAdminStatus ifIndex ifOperStatus ifType |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION |
| ZTE-AN-SMI | zxAnInterface |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3902.1082.30.40 | IdentityzxAnOpticalModuleMib | This MIB defines zte Access Node managed objects. | ||
| 1.3.6.1.4.1.3902.1082.30.40.1 | NodezxAnOpticalModuleGlobalObjects | |||
| 1.3.6.1.4.1.3902.1082.30.40.1.1 | ScalarzxAnOpticalModuleCapabilities | read-only | current | The optical module management capabilities of this equipment. The bit value 1 means the function represented by this bit is supported by this equipment. optica… |
| 1.3.6.1.4.1.3902.1082.30.40.1.2 | ScalarzxAnOptModuleIfShutdownUnplugEn | read-write | current | Indicates whether the zxAnOpticalModuleUnpluggedAlm should be generated when the port the optical module plugged in has been shutdown. enabled(1) : The zxAnOpt… |
| 1.3.6.1.4.1.3902.1082.30.40.1.3 | ScalarzxAnOptModuleFstUnpluggedRptEn | read-write | current | Indicates whether the zxAnOpticalModuleUnpluggedAlm should be generated when the agent has detected the optical module is offline for the first time. |
| 1.3.6.1.4.1.3902.1082.30.40.2 | NodezxAnOpticalModuleObjects | |||
| 1.3.6.1.4.1.3902.1082.30.40.2.2 | TablezxAnOpticalModuleAlmPrfTable | not-accessible | current | This table includes the optical module threshold profile. |
| 1.3.6.1.4.1.3902.1082.30.40.2.2.1 | RowzxAnOpticalModuleAlmPrfEntry | not-accessible | current | An entry in zxAnOpticalModuleAlmPrfTable. |
| 1.3.6.1.4.1.3902.1082.30.40.2.2.1.1 | ColumnzxAnOpticalModuleAlmPrfName | not-accessible | current | A textual string containing information about the optical module alarm threshold profile name . |
| 1.3.6.1.4.1.3902.1082.30.40.2.2.1.2 | ColumnzxAnOpticalRxPwrLowerThresh | read-create | current | The lower limit threshold on input optical power. The alarm should be generated when zxAnOpticalIfRxPwrCurrValue is lower than this threshold. The unit is 1dBm… |
| 1.3.6.1.4.1.3902.1082.30.40.2.2.1.3 | ColumnzxAnOpticalRxPwrUpperThresh | read-create | current | The upper limit threshold on input optical power. The alarm should be generated when zxAnOpticalIfRxPwrCurrValue exceeds this threshold. The unit is 1dBm when … |
| 1.3.6.1.4.1.3902.1082.30.40.2.2.1.4 | ColumnzxAnOpticalTxPwrLowerThresh | read-create | current | The lower limit threshold on output optical power. The alarm should be generated when zxAnOpticalIfTxPwrCurrValue is lower than this threshold. The unit is 1dB… |
| 1.3.6.1.4.1.3902.1082.30.40.2.2.1.5 | ColumnzxAnOpticalTxPwrUpperThresh | read-create | current | The upper limit threshold on output optical power. The alarm should be generated when zxAnOpticalIfTxPwrCurrValue exceeds this threshold. The unit is 1dBm when… |
| 1.3.6.1.4.1.3902.1082.30.40.2.2.1.6 | ColumnzxAnOpticalBiasCurrLowerThresh | read-create | current | The lower limit threshold on optical modules bias current.The alarm should be generated when zxAnOpticalBiasCurrent is lower than this threshold. The unit is 1… |
| 1.3.6.1.4.1.3902.1082.30.40.2.2.1.7 | ColumnzxAnOpticalBiasCurrUpperThresh | read-create | current | The upper limit threshold on optical modules bias current. The alarm should be generated when zxAnOpticalBiasCurrent exceeds this threshold. The unit is 1mA wh… |
| 1.3.6.1.4.1.3902.1082.30.40.2.2.1.8 | ColumnzxAnOpticalVoltageLowerThresh | read-create | current | The lower limit threshold on optical modules supply voltage. The alarm should be generated when zxAnOpticalSupplyVoltage is lower than this threshold. The unit… |
| 1.3.6.1.4.1.3902.1082.30.40.2.2.1.9 | ColumnzxAnOpticalVoltageUpperThresh | read-create | current | The upper limit threshold on optical modules supply voltage. The alarm should be generated when zxAnOpticalSupplyVoltage exceeds this threshold. The unit is 1 … |
| 1.3.6.1.4.1.3902.1082.30.40.2.2.1.10 | ColumnzxAnOpticalTempLowerThresh | read-create | current | The lower limit threshold on optical modules temperature. The alarm should be generated when zxAnOpticalTemperature is lower than this threshold. |
| 1.3.6.1.4.1.3902.1082.30.40.2.2.1.11 | ColumnzxAnOpticalTempUpperThresh | read-create | current | The upper limit threshold on optical modules temperature. The alarm should be generated when zxAnOpticalTemperature exceeds this threshold. |
| 1.3.6.1.4.1.3902.1082.30.40.2.2.1.12 | ColumnzxAnOpticalOfflineTrapEnable | read-create | current | Indicates whether optical module is online/offline traps should be generated for this interface. By default, this object should have the value enabled(1) for i… |
| 1.3.6.1.4.1.3902.1082.30.40.2.2.1.13 | ColumnzxAnOpticalModuleConfClass | read-create | current | The optical module configured class. |
| 1.3.6.1.4.1.3902.1082.30.40.2.2.1.50 | ColumnzxAnOpticalModuleAlmPrfRowStatus | read-create | current | The row status of this entry. |
| 1.3.6.1.4.1.3902.1082.30.40.2.3 | TablezxAnOpticalAlmPrfIfConfTable | not-accessible | current | This table includes the optical module profile configuration. |
| 1.3.6.1.4.1.3902.1082.30.40.2.3.1 | RowzxAnOpticalAlmPrfIfConfEntry | not-accessible | current | An entry in zxAnOpticalAlmPrfIfConfTable. |
| 1.3.6.1.4.1.3902.1082.30.40.2.3.1.2 | ColumnzxAnOpticalIfAlmPrf | read-write | current | A textual string containing information about the optical module alarm threshold profile name . |
| 1.3.6.1.4.1.3902.1082.30.40.2.4 | TablezxAnOpticalModuleInfoTable | not-accessible | current | This table includes the optical module information. |
| 1.3.6.1.4.1.3902.1082.30.40.2.4.1 | RowzxAnOpticalModuleInfoEntry | not-accessible | current | An entry in zxAnOpticalModuleInfoTable. |
| 1.3.6.1.4.1.3902.1082.30.40.2.4.1.2 | ColumnzxAnOpticalIfRxPwrCurrValue | read-only | current | The optical power monitored at the input. |
| 1.3.6.1.4.1.3902.1082.30.40.2.4.1.3 | ColumnzxAnOpticalIfTxPwrCurrValue | read-only | current | The optical power monitored at the output. |
| 1.3.6.1.4.1.3902.1082.30.40.2.4.1.4 | ColumnzxAnOpticalIfRate | read-only | current | The optical module interface rate. |
| 1.3.6.1.4.1.3902.1082.30.40.2.4.1.5 | ColumnzxAnOpticalBiasCurrent | read-only | current | The optical module bias current . |
| 1.3.6.1.4.1.3902.1082.30.40.2.4.1.6 | ColumnzxAnOpticalSupplyVoltage | read-only | current | The optical module supply voltage. |
| 1.3.6.1.4.1.3902.1082.30.40.2.4.1.7 | ColumnzxAnOpticalWavelength | read-only | current | The optical module wavelength. |
| 1.3.6.1.4.1.3902.1082.30.40.2.4.1.8 | ColumnzxAnOpticalTemperature | read-only | current | The optical module temperature . |
| 1.3.6.1.4.1.3902.1082.30.40.2.4.1.9 | ColumnzxAnOpticalFiberType | read-only | current | The optical module Fiber Type. |
| 1.3.6.1.4.1.3902.1082.30.40.2.4.1.10 | ColumnzxAnOpticalVersionLevel | read-only | current | The optical module vendor Level. |
| 1.3.6.1.4.1.3902.1082.30.40.2.4.1.11 | ColumnzxAnOpticalVendorPn | read-only | current | The optical module vendor P/N. |
| 1.3.6.1.4.1.3902.1082.30.40.2.4.1.12 | ColumnzxAnOpticalVendorName | read-only | current | The optical module vendor name. |
| 1.3.6.1.4.1.3902.1082.30.40.2.4.1.13 | ColumnzxAnOpticalVendorSn | read-only | current | The optical module vendor sn. |
| 1.3.6.1.4.1.3902.1082.30.40.2.4.1.14 | ColumnzxAnOpticalProductionDate | read-only | current | The optical module production date. |
| 1.3.6.1.4.1.3902.1082.30.40.2.4.1.15 | ColumnzxAnOpticalModuleType | read-only | current | The optical module type. |
| 1.3.6.1.4.1.3902.1082.30.40.2.4.1.16 | ColumnzxAnOpticalFiberInterfaceType | read-only | current | The optical fiber interface. |
| 1.3.6.1.4.1.3902.1082.30.40.2.4.1.17 | ColumnzxAnOpticalMaterialNumber | read-only | current | The material number of pin(A2). |
| 1.3.6.1.4.1.3902.1082.30.40.2.4.1.18 | ColumnzxAnOpticalRegisterData | read-only | current | The optical module data is from register. |
| 1.3.6.1.4.1.3902.1082.30.40.2.4.1.19 | ColumnzxAnOpticalOtdrSupport | read-only | current | The OTDR is supported by the optical module or not. supported(1): The optical module supports OTDR. unsupported(2): The optical module doesn't support OTDR. un… |
| 1.3.6.1.4.1.3902.1082.30.40.2.4.1.20 | ColumnzxAnOpticalModuleActualClass | read-only | current | The optical module actual class. |
| 1.3.6.1.4.1.3902.1082.30.40.2.4.1.21 | ColumnzxAnOpticalOtdrVersion | read-only | current | The optical module OTDR software version. If the optical module doesn't support OTDR or the OTDR has no software version, this object will be set to an empty s… |
| 1.3.6.1.4.1.3902.1082.30.40.2.4.1.40 | ColumnzxAnOpticalTransDistanceSmLongR | read-only | current | This value specifies the transfer distance that is supported by the transceiver while operating in compliance with the applicable standards using single mode b… |
| 1.3.6.1.4.1.3902.1082.30.40.2.4.1.41 | ColumnzxAnOpticalTransDistanceSmShortR | read-only | current | This value specifies the transfer distance that is supported by the transceiver while operating in compliance with the applicable standards using single mode b… |
| 1.3.6.1.4.1.3902.1082.30.40.2.4.1.42 | ColumnzxAnOpticalTransDistanceOm1 | read-only | current | This value specifies the transfer distance that is supported by the transceiver wihle operating in compliance with applicable standards using 62.5 micron multi… |
| 1.3.6.1.4.1.3902.1082.30.40.2.4.1.43 | ColumnzxAnOpticalTransDistanceOm2 | read-only | current | This value specifies the transfer distance that is supported by the transceiver wihle operating in compliance with applicable standards using 50 micron multimo… |
| 1.3.6.1.4.1.3902.1082.30.40.2.4.1.44 | ColumnzxAnOpticalTransDistanceOm3 | read-only | current | This value specifies the transfer distance that is supported by the transceiver wihle operating in compliance with applicable standards using 50 micron multimo… |
| 1.3.6.1.4.1.3902.1082.30.40.2.4.1.45 | ColumnzxAnOpticalTransDistanceCopper | read-only | current | This value specifies the transfer distance that is supported by the transceiver wihle operating in compliance with applicable standards using copper cable. For… |
| 1.3.6.1.4.1.3902.1082.30.40.2.4.1.48 | ColumnzxAnOpticalPartNumber | read-only | current | The optical module part number. |
| 1.3.6.1.4.1.3902.1082.30.40.2.5 | TablezxAnOpticalAlsIfConfTable | not-accessible | current | This table includes the ALS configuration of the optical module. |
| 1.3.6.1.4.1.3902.1082.30.40.2.5.1 | RowzxAnOpticalAlsIfConfEntry | not-accessible | current | An entry in zxAnOpticalAlsIfConfTable. |
| 1.3.6.1.4.1.3902.1082.30.40.2.5.1.1 | ColumnzxAnOptAlsEnable | read-write | current | Enable or disable the ALS function. |
| 1.3.6.1.4.1.3902.1082.30.40.2.5.1.2 | ColumnzxAnOptAlsLaserLosDuration | read-write | current | This attribute specifies the value of the LOS duration. The laser will be shutdown when detected the LOS duration longer than zxAnOptAlsLaserLosDuration value.… |
| 1.3.6.1.4.1.3902.1082.30.40.2.5.1.3 | ColumnzxAnOptAlsLaserShutdownDuration | read-write | current | This attribute specifies the value of the laser shutdown duration. Setting this object will enable the ALS function. |
| 1.3.6.1.4.1.3902.1082.30.40.2.5.1.4 | ColumnzxAnOptAlsLaserStartUpDuration | read-write | current | This attribute specifies the value of the laser re-open duration. Setting this object will enable the ALS function. |
| 1.3.6.1.4.1.3902.1082.30.40.2.6 | TablezxAnOpticalModuleConfTable | not-accessible | current | This table includes the optical module configuration. |
| 1.3.6.1.4.1.3902.1082.30.40.2.6.1 | RowzxAnOpticalModuleConfEntry | not-accessible | current | An entry in zxAnOpticalModuleConfTable. |
| 1.3.6.1.4.1.3902.1082.30.40.2.6.1.1 | ColumnzxAnOpticalModuleConfVendorName | not-accessible | current | The optical module vendor name. |
| 1.3.6.1.4.1.3902.1082.30.40.2.6.1.2 | ColumnzxAnOpticalModuleConfVendorPn | not-accessible | current | The optical module vendor P/N. |
| 1.3.6.1.4.1.3902.1082.30.40.2.6.1.3 | ColumnzxAnOpticalModuleConfiguredClass | read-create | current | The optical module configured class. Includes the following: GPON/B+, GPON/C+, GPON/EC+, XGPON1/N1, XGPON1/N2a, EPON/PX20+, 10G-EPON/PRX30, 10G-EPON/PR30, GPON… |
| 1.3.6.1.4.1.3902.1082.30.40.2.6.1.4 | ColumnzxAnOpticalModuleConfProperty | read-create | current | The property of the table record. default: the default record, it can't be modified or deleted by the user. userDefined: the user-defined record. |
| 1.3.6.1.4.1.3902.1082.30.40.2.6.1.11 | ColumnzxAnOpticalModuleConfTechNorms | read-create | current | The optical module configured technical norms. |
| 1.3.6.1.4.1.3902.1082.30.40.2.6.1.50 | ColumnzxAnOpticalModuleConfRowStatus | read-create | current | The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a man… |
| 1.3.6.1.4.1.3902.1082.30.40.2.10 | TablezxAnOpticalModuleChanInfoTable | not-accessible | current | This table includes the optical module channel information. |
| 1.3.6.1.4.1.3902.1082.30.40.2.10.1 | RowzxAnOpticalModuleChanInfoEntry | not-accessible | current | An entry in zxAnOpticalModuleChanInfoTable. |
| 1.3.6.1.4.1.3902.1082.30.40.2.10.1.1 | ColumnzxAnOpticalChanLaserSwitch | read-write | current | Enables or disables the laser function of the optical module channel. |
| 1.3.6.1.4.1.3902.1082.30.40.2.10.1.2 | ColumnzxAnOpticalChanWavelength | read-only | current | The wavelength of the optical module channel. |
| 1.3.6.1.4.1.3902.1082.30.40.2.10.1.3 | ColumnzxAnOpticalChanCurrTxPwr | read-only | current | The transmitted power of the optical module channel. |
| 1.3.6.1.4.1.3902.1082.30.40.2.10.1.4 | ColumnzxAnOpticalChanBiasCurrent | read-only | current | The bias current of the optical module channel. |
| 1.3.6.1.4.1.3902.1082.30.40.2.20 | TablezxAnOpticalModuleClassValueTable | not-accessible | current | This table includes the optical module class value. NOTE: No recommended to develop this function in EMS. |
| 1.3.6.1.4.1.3902.1082.30.40.2.20.1 | RowzxAnOpticalModuleClassValueEntry | not-accessible | current | An entry in zxAnOpticalModuleClassValueTable. |
| 1.3.6.1.4.1.3902.1082.30.40.2.20.1.1 | ColumnzxAnOpticalModuleClassId | not-accessible | current | The optical module class id. |
| 1.3.6.1.4.1.3902.1082.30.40.2.20.1.2 | ColumnzxAnOpticalModuleClassValue | read-only | current | The optical module class value. |
| 1.3.6.1.4.1.3902.1082.30.40.3 | NodezxAnOpticalModuleNotifications | |||
| 1.3.6.1.4.1.3902.1082.30.40.3.1 | NotificationzxAnOptRxPwrUnderThreshAlm | current | It indicates that zxAnOpticalIfRxPwrCurrValue is below the zxAnOpticalRxPwrLowerThresh. | |
| 1.3.6.1.4.1.3902.1082.30.40.3.2 | NotificationzxAnOptRxPwrUnderThreshClr | current | zxAnOptRxPwrUnderThreshAlm clear | |
| 1.3.6.1.4.1.3902.1082.30.40.3.3 | NotificationzxAnOptRxPwrOverThreshAlm | current | It indicates that zxAnOpticalIfRxPwrCurrValue is exceeds the zxAnOpticalRxPwrUpperThresh. | |
| 1.3.6.1.4.1.3902.1082.30.40.3.4 | NotificationzxAnOptRxPwrOverThreshClr | current | zxAnOptPwrRxOverThreshAlarm clear. | |
| 1.3.6.1.4.1.3902.1082.30.40.3.5 | NotificationzxAnOptTxPwrUnderThreshAlm | current | It indicates that zxAnOpticalIfTxPwrCurrValue is below the zxAnOpticalTxPwrLowerThresh. | |
| 1.3.6.1.4.1.3902.1082.30.40.3.6 | NotificationzxAnOptTxPwrUnderThreshClr | current | zxAnOptPwrTxUnderThreshAlarm clear | |
| 1.3.6.1.4.1.3902.1082.30.40.3.7 | NotificationzxAnOptTxPwrOverThreshAlm | current | It indicates that zxAnOpticalIfTxPwrCurrValue is exceeds the zxAnOpticalTxPwrUpperThresh. | |
| 1.3.6.1.4.1.3902.1082.30.40.3.8 | NotificationzxAnOptTxPwrOverThreshClr | current | zxAnOptPwrTxOverThreshAlarm clear. | |
| 1.3.6.1.4.1.3902.1082.30.40.3.9 | NotificationzxAnOptBiasCurrUnderThreshAlm | current | It indicates that zxAnOpticalBiasCurrent is below the zxAnOpticalBiasCurrLowerThresh. | |
| 1.3.6.1.4.1.3902.1082.30.40.3.10 | NotificationzxAnOptBiasCurrUnderThreshClr | current | zxAnOptBiasCurrUnderThreshAlm clear. | |
| 1.3.6.1.4.1.3902.1082.30.40.3.11 | NotificationzxAnOptBiasCurrOverThreshAlm | current | It indicates that zxAnOpticalBiasCurrent is over the zxAnOpticalBiasCurrUpperThresh. | |
| 1.3.6.1.4.1.3902.1082.30.40.3.12 | NotificationzxAnOptBiasCurrOverThreshClr | current | zxAnOptBiasCurrOverThreshAlm clear. | |
| 1.3.6.1.4.1.3902.1082.30.40.3.13 | NotificationzxAnOptVoltageUnderThreshAlm | current | It indicates that zxAnOpticalSupplyVoltage is below the zxAnOpticalVoltageLowerThresh. | |
| 1.3.6.1.4.1.3902.1082.30.40.3.14 | NotificationzxAnOptVoltageUnderThreshClr | current | zxAnOptVoltageUnderThreshAlm clear. | |
| 1.3.6.1.4.1.3902.1082.30.40.3.15 | NotificationzxAnOptVoltageOverThreshAlm | current | It indicates that zxAnOpticalSupplyVoltage is over the zxAnOpticalVoltageUpperThresh. | |
| 1.3.6.1.4.1.3902.1082.30.40.3.16 | NotificationzxAnOptVoltageOverThreshClr | current | zxAnOptVoltageOverThreshAlm clear. | |
| 1.3.6.1.4.1.3902.1082.30.40.3.17 | NotificationzxAnOptTempUnderThreshAlm | current | It indicates that zxAnOpticalTemperature is below the zxAnOpticalTempLowerThresh. | |
| 1.3.6.1.4.1.3902.1082.30.40.3.18 | NotificationzxAnOptTempUnderThreshClr | current | zxAnOptTempUnderThreshAlm clear. | |
| 1.3.6.1.4.1.3902.1082.30.40.3.19 | NotificationzxAnOptTempOverThreshAlm | current | It indicates that zxAnOpticalTemperature is over the zxAnOpticalTempUpperThresh. | |
| 1.3.6.1.4.1.3902.1082.30.40.3.20 | NotificationzxAnOptTempOverThreshClr | current | zxAnOptTempOverThreshAlm clear. | |
| 1.3.6.1.4.1.3902.1082.30.40.3.21 | NotificationzxAnOpticalModuleUnpluggedAlm | current | The alarm occurred when optical module is not online. | |
| 1.3.6.1.4.1.3902.1082.30.40.3.22 | NotificationzxAnOpticalModuleUnpluggedClr | current | The alarm restore when optical module is online. | |
| 1.3.6.1.4.1.3902.1082.30.40.3.23 | NotificationzxAnOptModuleClassMismatchAlm | current | A zxAnOptModuleClassMismatchAlm trap is sent when the agent has detected that the optical module has plugged in, but zxAnOpticalModuleConfClass is not same as … | |
| 1.3.6.1.4.1.3902.1082.30.40.3.24 | NotificationzxAnOptModuleClassMismatchClr | current | A zxAnOptModuleClassMismatchClr trap is sent when the agent has detected that the optical module has plugged in, and zxAnOpticalModuleConfClass is same as zxAn… | |
| 1.3.6.1.4.1.3902.1082.30.40.3.51 | NotificationzxAnOptChanTxPwrUnderThreshAlm | current | A zxAnOptChanTxPwrUnderThreshAlm trap is sent when the agent has detected that the zxAnOpticalChanCurrTxPwr has been less than the zxAnOpticalTxPwrLowerThresh. | |
| 1.3.6.1.4.1.3902.1082.30.40.3.52 | NotificationzxAnOptChanTxPwrUnderThreshClr | current | A zxAnOptChanTxPwrUnderThreshClr trap is sent when the zxAnOptChanTxPwrUnderThreshAlm is cleared. | |
| 1.3.6.1.4.1.3902.1082.30.40.3.53 | NotificationzxAnOptChanTxPwrOverThreshAlm | current | A zxAnOptChanTxPwrOverThreshAlm trap is sent when the agent has detected that the zxAnOpticalChanCurrTxPwr has been exceeded the zxAnOpticalTxPwrUpperThresh. | |
| 1.3.6.1.4.1.3902.1082.30.40.3.54 | NotificationzxAnOptChanTxPwrOverThreshClr | current | A zxAnOptChanTxPwrOverThreshClr trap is sent when the zxAnOptChanTxPwrOverThreshAlm is cleared. | |
| 1.3.6.1.4.1.3902.1082.30.40.3.55 | NotificationzxAnOptChanBiasUnderThreshAlm | current | A zxAnOptChanBiasUnderThreshAlm trap is sent when the agent has detected that the zxAnOpticalChanBiasCurrent has been less than the zxAnOpticalBiasCurrLowerThr… | |
| 1.3.6.1.4.1.3902.1082.30.40.3.56 | NotificationzxAnOptChanBiasUnderThreshClr | current | A zxAnOptChanBiasCurrUnderThreshClr trap is sent when the zxAnOptChanBiasUnderThreshAlm is cleared. | |
| 1.3.6.1.4.1.3902.1082.30.40.3.57 | NotificationzxAnOptChanBiasOverThreshAlm | current | A zxAnOptChanBiasOverThreshAlm trap is sent when the agent has detected that the zxAnOpticalChanBiasCurrent has been exceeded the zxAnOpticalBiasCurrUpperThres… | |
| 1.3.6.1.4.1.3902.1082.30.40.3.58 | NotificationzxAnOptChanBiasOverThreshClr | current | A zxAnOptChanBiasOverThreshClr trap is sent when the zxAnOptChanBiasOverThreshAlm is cleared. | |
| 1.3.6.1.4.1.3902.1082.30.40.3.59 | NotificationzxAnOptEponGponMismatchAlm | current | A zxAnOptEponGponMismatchAlm trap is sent when the agent has detected that the GPON optical module is plugged in the EPON port or the EPON optical module is pl… | |
| 1.3.6.1.4.1.3902.1082.30.40.3.60 | NotificationzxAnOptEponGponMismatchClr | current | A zxAnOptEponGponMismatchClr trap is sent when the zxAnOptEponGponMismatchAlm is cleared. | |
| 1.3.6.1.4.1.3902.1082.30.40.4 | NodezxAnOpticalModuleConformance |