ZTE-AN-OTDR-MIB
348 objects
The MIB module for the management of OTDR equipment.
Imported Objects
| IF-MIB | ifIndex |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DateAndTime DisplayString RowStatus |
| ZTE-AN-OFD-SMI | zxAnOfd |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3902.1083.5 | IdentityzxAnOtdrMib | The MIB module for the management of OTDR equipment. | ||
| 1.3.6.1.4.1.3902.1083.5.1 | NodezxAnOtdrGlobalObjects | |||
| 1.3.6.1.4.1.3902.1083.5.1.1 | NodezxAnOtdrCapacityGlobalObjects | |||
| 1.3.6.1.4.1.3902.1083.5.1.1.1 | ScalarzxAnOtdrWaveLengthList | read-only | current | The wave length supported by OTDR. The value divided by '|'. The unit of wave length is nm. PON OLTs support 1625. eOMUs support 1550|1625. |
| 1.3.6.1.4.1.3902.1083.5.1.1.2 | ScalarzxAnOtdrTestPulseWidthList | read-only | current | The pulse width supported by OTDR. The value divided by '|'. The unit of pulse width is ns. The value 200001 means 2.5ns. e.g., 5|10|30|100|200|500|10000|20000… |
| 1.3.6.1.4.1.3902.1083.5.1.1.3 | ScalarzxAnOtdrTotalPorts | read-only | current | The total port number of OTDR. |
| 1.3.6.1.4.1.3902.1083.5.1.1.4 | ScalarzxAnOtdrTestSeqCodeLenList | read-only | current | The sequence code length supported by OTDR. The value divided by '|'. PON OLTs support 512|1024|2048|4096. eOMUs support 64|256|512|1024. |
| 1.3.6.1.4.1.3902.1083.5.1.1.5 | ScalarzxAnOtdrTestSeqCodeWidthList | read-only | current | The sequence code width supported by OTDR. The value divided by '|'. The unit of pulse width is ns. PON OLTs support 5|10|20|30|50. eOMUs support 5|10|20|30. |
| 1.3.6.1.4.1.3902.1083.5.1.1.6 | ScalarzxAnOtdrDualWavelengthTestMode | read-only | current | The test mode of dual wavelength. cascade(1): dual wavelength testing on two NEs by cascade. nonCascade(2): dual wavelength testing on one NE. |
| 1.3.6.1.4.1.3902.1083.5.1.1.51 | ScalarzxAnOtdrCapabilities | read-only | current | The OTDR capabilities of this equipment. The bit value 1 means the function represented by this bit is supported by this equipment. - fastHealthPrfDiff(0): val… |
| 1.3.6.1.4.1.3902.1083.5.1.2 | NodezxAnOtdrEnvGlobalObjects | |||
| 1.3.6.1.4.1.3902.1083.5.1.2.1 | NodezxAnOtdrEnvCtrlCardGlobalObjects | |||
| 1.3.6.1.4.1.3902.1083.5.1.2.1.1 | ScalarzxAnOtdrCtrlCardCurrentTemp | read-only | current | The current control card temperature of OTDR equipment. |
| 1.3.6.1.4.1.3902.1083.5.1.2.1.2 | ScalarzxAnOtdrCtrlCardTempHighThresh | read-write | current | The high threshold of the control card temperature, the zxAnOtdrEnvCtrlCardHighTempAlm trap should be generated when zxAnOtdrCtrlCardCurrentTemp is higher than… |
| 1.3.6.1.4.1.3902.1083.5.1.2.1.3 | ScalarzxAnOtdrCtrlCardTempLowThresh | read-write | current | The low threshold of the control card temperature, the zxAnOtdrEnvCtrlCardLowTempAlm trap should be generated when zxAnOtdrCtrlCardCurrentTemp is lower than it… |
| 1.3.6.1.4.1.3902.1083.5.1.2.2 | NodezxAnOtdrEnvFanGlobalObjects | |||
| 1.3.6.1.4.1.3902.1083.5.1.2.2.1 | ScalarzxAnOtdrEnvFanStatus | read-only | current | The fan status. When zxAnOtdrEnvFanStatus is abnormal, zxAnOtdrEnvFanFailureAlm trap should be sent to manager. If zxAnOtdrEnvFanStatus is normal, zxAnOtdrEnvF… |
| 1.3.6.1.4.1.3902.1083.5.1.2.2.2 | ScalarzxAnOtdrEnvFanOperStatus | read-only | current | The operational status of fan. |
| 1.3.6.1.4.1.3902.1083.5.1.2.3 | NodezxAnOtdrEnvApdGlobalObjects | |||
| 1.3.6.1.4.1.3902.1083.5.1.2.3.1 | ScalarzxAnOtdrEnvApdCurrentTemp | read-only | current | The current temperature of APD. |
| 1.3.6.1.4.1.3902.1083.5.1.2.3.2 | ScalarzxAnOtdrEnvApdTempHighThresh | read-write | current | The high threshold of the APD temperature, the zxAnOtdrEnvApdHighTempAlm trap should be generated when zxAnOtdrEnvApdCurrentTemp is higher than it. Otherwise, … |
| 1.3.6.1.4.1.3902.1083.5.1.2.3.3 | ScalarzxAnOtdrEnvApdTempLowThresh | read-write | current | The low threshold of the APD temperature, the zxAnOtdrEnvApdLowTempAlm trap should be generated when zxAnOtdrEnvApdCurrentTemp is lower than it. Otherwise, zxA… |
| 1.3.6.1.4.1.3902.1083.5.1.3 | NodezxAnOtdrPortUtilGlobalObjects | |||
| 1.3.6.1.4.1.3902.1083.5.1.3.1 | ScalarzxAnOtdrPortUtilization | read-only | current | The current port utilization of OTDR equipment. |
| 1.3.6.1.4.1.3902.1083.5.1.3.2 | ScalarzxAnOtdrPortUtilizationThresh | read-write | current | The threshold of zxAnOtdrPortUtilization. When zxAnOtdrPortUtilization exceeds this threshold, the zxAnOtdrPortUtlExceedAlm trap should be generated. |
| 1.3.6.1.4.1.3902.1083.5.2 | NodezxAnOtdrObjects | |||
| 1.3.6.1.4.1.3902.1083.5.2.1 | NodezxAnOtdrIfObjects | |||
| 1.3.6.1.4.1.3902.1083.5.2.1.1 | NodezxAnOtdrIfGlobalObjects | |||
| 1.3.6.1.4.1.3902.1083.5.2.1.1.1 | ScalarzxAnOtdrGlobalTestParamPrf | read-write | current | The OTDR global test parameter profile name list. The global profile is applied to the interface when the interface test parameter profile is unconfigured. |
| 1.3.6.1.4.1.3902.1083.5.2.1.1.2 | ScalarzxAnOtdrGlobalNetworkPropertyPrf | read-write | current | The OTDR global network property profile name list. The global profile is applied to the interface when the interface network property profile is unconfigured. |
| 1.3.6.1.4.1.3902.1083.5.2.1.1.3 | ScalarzxAnOtdrGlobalAcceptanceTestPrf | read-write | current | The OTDR acceptance test parameter profile name list, such as 'DEFAULT_ACCEPTANCE_1,DEFAULT_ACCEPTANCE_2,DEFAULT_ACCEPTANCE_3', which are in order of decreasin… |
| 1.3.6.1.4.1.3902.1083.5.2.1.2 | TablezxAnOtdrTestParamPrfTable | not-accessible | current | This table includes OTDR test parameter Profile information. |
| 1.3.6.1.4.1.3902.1083.5.2.1.2.1 | RowzxAnOtdrTestParamPrfEntry | not-accessible | current | OTDR test parameter profile entry. |
| 1.3.6.1.4.1.3902.1083.5.2.1.2.1.1 | ColumnzxAnOtdrTestParamPrfName | not-accessible | current | OTDR test parameter profile name. |
| 1.3.6.1.4.1.3902.1083.5.2.1.2.1.2 | ColumnzxAnOtdrTestParamPrfMode | read-create | current | OTDR test mode. When the mode is pulseMethod, zxAnOtdrTestParamPrfWaveLength, zxAnOtdrTestParamPrfDistance, zxAnOtdrTestParamPrfFiberIor, zxAnOtdrTestParamPrfP… |
| 1.3.6.1.4.1.3902.1083.5.2.1.2.1.3 | ColumnzxAnOtdrTestParamPrfWaveLength | read-create | current | OTDR test wave length. |
| 1.3.6.1.4.1.3902.1083.5.2.1.2.1.4 | ColumnzxAnOtdrTestParamPrfDistance | read-create | current | OTDR test distance. |
| 1.3.6.1.4.1.3902.1083.5.2.1.2.1.5 | ColumnzxAnOtdrTestParamPrfFiberIor | read-create | current | OTDR test fiber IOR. The range is from 1.4*(10^6) to 1.6*(10^6). |
| 1.3.6.1.4.1.3902.1083.5.2.1.2.1.6 | ColumnzxAnOtdrTestParamPrfPulseWidth | read-create | current | OTDR test pulse width. '0' means not configured. A value less than 200000 is mapped to an integer pulse width value. A value greater than 200000 is mapped to a… |
| 1.3.6.1.4.1.3902.1083.5.2.1.2.1.7 | ColumnzxAnOtdrTestParamPrfDuration | read-create | current | OTDR test duration. '0' means not configured |
| 1.3.6.1.4.1.3902.1083.5.2.1.2.1.8 | ColumnzxAnOtdrTestParamPrfSeqCodeLen | read-create | current | OTDR test sequence code length. The valid value is the power of two, For example:16,32,64. '0' means not configured. |
| 1.3.6.1.4.1.3902.1083.5.2.1.2.1.9 | ColumnzxAnOtdrTestParamPrfSeqCodeWidth | read-create | current | OTDR test sequence code width. '0' means not configured. |
| 1.3.6.1.4.1.3902.1083.5.2.1.2.1.50 | ColumnzxAnOtdrTestParamPrfRowStatus | read-create | current | The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a man… |
| 1.3.6.1.4.1.3902.1083.5.2.1.3 | TablezxAnOtdrIfTable | not-accessible | current | This table includes OTDR test interface information. |
| 1.3.6.1.4.1.3902.1083.5.2.1.3.1 | RowzxAnOtdrIfEntry | not-accessible | current | OTDR interface entry. |
| 1.3.6.1.4.1.3902.1083.5.2.1.3.1.5 | ColumnzxAnOtdrIfAlias | read-write | current | OTDR interface alias. |
| 1.3.6.1.4.1.3902.1083.5.2.1.3.1.6 | ColumnzxAnOtdrIfFastTestParamPrf | read-write | current | OTDR fast test parameter profile name list, such as 'DEFAULT_PULSE,DEFAULT_SEQUENCE'. Empty string means unconfigured. |
| 1.3.6.1.4.1.3902.1083.5.2.1.3.1.7 | ColumnzxAnOtdrIfRoutineTestParamPrf | read-write | current | OTDR routine test parameter profile name list, such as 'DEFAULT_PULSE,DEFAULT_SEQUENCE'. Empty string means unconfigured. |
| 1.3.6.1.4.1.3902.1083.5.2.1.3.1.8 | ColumnzxAnOtdrIfHealthTestParamPrf | read-write | current | OTDR health test parameter profile name list, such as 'DEFAULT_PULSE,DEFAULT_SEQUENCE'. Empty string means unconfigured. |
| 1.3.6.1.4.1.3902.1083.5.2.1.3.1.9 | ColumnzxAnOtdrIfReflectorTestParamPrf | read-write | current | OTDR reflector test parameter profile name list, such as 'DEFAULT_REFLECTOR'. |
| 1.3.6.1.4.1.3902.1083.5.2.1.3.1.10 | ColumnzxAnOtdrIfNetworkPropertyPrf | read-write | current | OTDR interface network property profile name list. Empty string means unconfigured. |
| 1.3.6.1.4.1.3902.1083.5.2.1.3.1.11 | ColumnzxAnOtdrIfAcceptanceTestPrf | read-write | current | OTDR acceptance test parameter profile name list, such as 'DEFAULT_PULSE,DEFAULT_SEQUENCE,DEFAULT_ACCEPTANCE', which are in order of decreasing priority. Empty… |
| 1.3.6.1.4.1.3902.1083.5.2.1.3.1.17 | ColumnzxAnOtdrIfNetworkProperty | read-write | current | The network property of OTDR interface. p2mp(1): the network of point to multi-points. p2p(2): the network of point to point. |
| 1.3.6.1.4.1.3902.1083.5.2.1.3.1.18 | ColumnzxAnOtdrIfWorkingStatus | read-only | current | The working status of OTDR interface. |
| 1.3.6.1.4.1.3902.1083.5.2.1.3.1.19 | ColumnzxAnOtdrIfUsageStatus | read-only | current | The usage status of OTDR interface. used(1): Health test has been run successfully. unused(2): No test parameter profile is bound to the port and the health te… |
| 1.3.6.1.4.1.3902.1083.5.2.1.3.1.20 | ColumnzxAnOtdrIfUsageStatusSwitch | read-write | current | The usage status switch of OTDR interface. An unused status can be switched to reserved, and reserved status can be switched to unused. When get this variable,… |
| 1.3.6.1.4.1.3902.1083.5.2.1.3.1.21 | ColumnzxAnOtdrIfWorkMode | read-only | current | The working mode of OTDR interface. When the mode is faultLocating, the interface can be used for fault locating. When the mode is nodeMonitoring, the interfac… |
| 1.3.6.1.4.1.3902.1083.5.2.1.3.1.22 | ColumnzxAnOtdrIfBothwayTestPrf | read-write | current | OTDR bothway test parameter profile name list, such as 'DEFAULT_P2P'. Empty string means unconfigured. |
| 1.3.6.1.4.1.3902.1083.5.2.1.4 | TablezxAnOtdrNetPropPrfTable | not-accessible | current | OTDR network property profile table. |
| 1.3.6.1.4.1.3902.1083.5.2.1.4.1 | RowzxAnOtdrNetPropPrfEntry | not-accessible | current | OTDR network property profile entry. |
| 1.3.6.1.4.1.3902.1083.5.2.1.4.1.1 | ColumnzxAnOtdrNetPrfName | not-accessible | current | OTDR network property profile name. |
| 1.3.6.1.4.1.3902.1083.5.2.1.4.1.2 | ColumnzxAnOtdrNetPrfLinkType | read-create | current | OTDR link type. p2mp(1): the network of point to multi-points. p2p(2): the network of point to point. |
| 1.3.6.1.4.1.3902.1083.5.2.1.4.1.3 | ColumnzxAnOtdrNetPrfFirstSplitRatio | read-create | current | OTDR first-level splitting ratio. ratio1-x(20) : first-level splitting ratio is unknown. none(255) : first-level splitting does not exist. |
| 1.3.6.1.4.1.3902.1083.5.2.1.4.1.4 | ColumnzxAnOtdrNetPrfSecondSplitRatio | read-create | current | OTDR second-level splitting ratio. ratio1-x(20) : second-level splitting ratio is unknown. none(255) : second-level splitting does not exist. |
| 1.3.6.1.4.1.3902.1083.5.2.1.4.1.5 | ColumnzxAnOtdrNetPrfThirdSplitRatio | read-create | current | OTDR third-level splitting ratio. ratio1-x(20) : third-level splitting ratio is unknown. none(255) : third-level splitting does not exist. |
| 1.3.6.1.4.1.3902.1083.5.2.1.4.1.6 | ColumnzxAnOtdrNetPrfLinkLength | read-create | current | OTDR link length. Value 0 means unconfigured. |
| 1.3.6.1.4.1.3902.1083.5.2.1.4.1.50 | ColumnzxAnOtdrNetPrfRowStatus | read-create | current | The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a man… |
| 1.3.6.1.4.1.3902.1083.5.2.2 | NodezxAnOtdrFastTestObjects | |||
| 1.3.6.1.4.1.3902.1083.5.2.2.1 | NodezxAnOtdrFastTestConfObjects | |||
| 1.3.6.1.4.1.3902.1083.5.2.2.1.1 | NodezxAnOtdrFastTestActionObjects | |||
| 1.3.6.1.4.1.3902.1083.5.2.2.1.1.1 | ScalarzxAnOtdrFastTestSn | read-write | current | OTDR fast test serial number. |
| 1.3.6.1.4.1.3902.1083.5.2.2.1.1.2 | ScalarzxAnOtdrFastTestAction | read-write | current | OTDR fast test action. |
| 1.3.6.1.4.1.3902.1083.5.2.2.1.1.3 | ScalarzxAnOtdrFastTestMode | read-write | current | OTDR fast test mode. When the mode is pulseMethod, zxAnOtdrFastTestWaveLength, zxAnOtdrFastTestDistance, zxAnOtdrFastTestFiberIor, zxAnOtdrFastTestPulseWidth, … |
| 1.3.6.1.4.1.3902.1083.5.2.2.1.1.4 | ScalarzxAnOtdrFastTestWaveLength | read-write | current | OTDR fast test wave length. |
| 1.3.6.1.4.1.3902.1083.5.2.2.1.1.5 | ScalarzxAnOtdrFastTestDistance | read-write | current | OTDR fast test distance. |
| 1.3.6.1.4.1.3902.1083.5.2.2.1.1.6 | ScalarzxAnOtdrFastTestFiberIor | read-write | current | OTDR fast test fiber IOR. The range is from 1.4*(10^6) to 1.6*(10^6). |
| 1.3.6.1.4.1.3902.1083.5.2.2.1.1.7 | ScalarzxAnOtdrFastTestPulseWidth | read-write | current | OTDR fast test pulse width. A value less than 200000 is mapped to an integer pulse width value. A value greater than 200000 is mapped to a specific pulse width… |
| 1.3.6.1.4.1.3902.1083.5.2.2.1.1.8 | ScalarzxAnOtdrFastTestDuration | read-write | current | OTDR fast test duration. |
| 1.3.6.1.4.1.3902.1083.5.2.2.1.1.9 | ScalarzxAnOtdrFastTestSeqCodeLen | read-write | current | OTDR fast test sequence code length. The valid value is the power of two, For example:16,32,64. |
| 1.3.6.1.4.1.3902.1083.5.2.2.1.1.10 | ScalarzxAnOtdrFastTestSeqCodeWidth | read-write | current | OTDR fast test sequence code width. |
| 1.3.6.1.4.1.3902.1083.5.2.2.1.1.11 | ScalarzxAnOtdrTestType | read-write | current | OTDR test type. |
| 1.3.6.1.4.1.3902.1083.5.2.2.1.1.12 | ScalarzxAnOtdrFastTestPriority | read-write | current | OTDR fast test priority. |
| 1.3.6.1.4.1.3902.1083.5.2.2.1.1.13 | ScalarzxAnOtdrFastTestRequestSource | read-write | current | OTDR fast test request source. |
| 1.3.6.1.4.1.3902.1083.5.2.2.1.1.14 | ScalarzxAnOtdrFastTestRequestSrcIpType | read-write | current | IP address type of the OTDR fast test request source. |
| 1.3.6.1.4.1.3902.1083.5.2.2.1.1.15 | ScalarzxAnOtdrFastTestRequestSrcIp | read-write | current | IP address of the OTDR fast test request source. |
| 1.3.6.1.4.1.3902.1083.5.2.2.1.1.16 | ScalarzxAnOtdrMonNodeTestType | read-write | current | OTDR monitoring node test type. |
| 1.3.6.1.4.1.3902.1083.5.2.2.1.2 | TablezxAnOtdrFastTestIfTable | not-accessible | current | OTDR fast test interface table. |
| 1.3.6.1.4.1.3902.1083.5.2.2.1.2.1 | RowzxAnOtdrFastTestIfEntry | not-accessible | current | OTDR fast test interface entry. The OTDR fast test consists of two steps, creating fast test ports(zxAnOtdrFastTestIfTable), and then starting fast test(zxAnOt… |
| 1.3.6.1.4.1.3902.1083.5.2.2.1.2.1.1 | ColumnzxAnOtdrFastTestIfSn | not-accessible | current | OTDR fast test serial number. |
| 1.3.6.1.4.1.3902.1083.5.2.2.1.2.1.2 | ColumnzxAnOtdrAcceptanceTestIfParamPrf | read-create | current | OTDR acceptance test parameter profile name list chosen from zxAnOtdrIfAcceptanceTestPrf. e.g. 'DEFAULT-PULSE','DEFAULT-PULSE,DEFAULT-SEQUENCE', 'DEFAULT-PULSE… |
| 1.3.6.1.4.1.3902.1083.5.2.2.1.2.1.50 | ColumnzxAnOtdrFastTestIfRowStatus | read-create | current | The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a man… |
| 1.3.6.1.4.1.3902.1083.5.2.2.2 | NodezxAnOtdrFastTestStatusObjects | |||
| 1.3.6.1.4.1.3902.1083.5.2.2.2.1 | NodezxAnOtdrFastTestStatusGlbObjects | |||
| 1.3.6.1.4.1.3902.1083.5.2.2.2.1.1 | ScalarzxAnOtdrFastTestCurrentPort | read-only | current | Current fast testing port index such as '1-1-3-2'. Return empty string means no port is being tested. |
| 1.3.6.1.4.1.3902.1083.5.2.2.2.1.2 | ScalarzxAnOtdrFastTestWaitTestPorts | read-only | current | Current fast test waiting test port number. Return 0 measns no port waiting test. |
| 1.3.6.1.4.1.3902.1083.5.2.2.2.2 | TablezxAnOtdrFastTestIfStatusTable | not-accessible | current | OTDR fast test port status table. |
| 1.3.6.1.4.1.3902.1083.5.2.2.2.2.1 | RowzxAnOtdrFastTestIfStatusEntry | not-accessible | current | OTDR fast test interface status entry. |
| 1.3.6.1.4.1.3902.1083.5.2.2.2.2.1.1 | ColumnzxAnOtdrFastTestIfStatus | read-only | current | The result status of OTDR fast test. |
| 1.3.6.1.4.1.3902.1083.5.2.2.2.2.1.2 | ColumnzxAnOtdrFastTestIfFailedReason | read-only | current | The OTDR fast test failed reason. |
| 1.3.6.1.4.1.3902.1083.5.2.2.2.2.1.3 | ColumnzxAnOtdrFastTestIfResultFile | read-only | current | Fast test result file name. NE returns file name such as '1-1-5-1-20120505143302.csv' when the fast test sucess. NE returns empty string when the fast test fai… |
| 1.3.6.1.4.1.3902.1083.5.2.2.2.2.1.4 | ColumnzxAnOtdrFastTestIfParamPrfs | read-only | current | Number of test parameter profile. |
| 1.3.6.1.4.1.3902.1083.5.2.2.2.2.1.5 | ColumnzxAnOtdrFastTestIfFinishedPrfs | read-only | current | Number of finished test parameter profile. |
| 1.3.6.1.4.1.3902.1083.5.2.2.2.2.1.6 | ColumnzxAnOtdrFastTestIfEvalTotalTime | read-only | current | OTDR test estimated total time. |
| 1.3.6.1.4.1.3902.1083.5.2.2.2.2.1.7 | ColumnzxAnOtdrFastTestIfElapsedTime | read-only | current | OTDR test elapsed time. |
| 1.3.6.1.4.1.3902.1083.5.2.2.3 | NodezxAnOtdrFastTestFileFtpObjects | |||
| 1.3.6.1.4.1.3902.1083.5.2.2.3.1 | NodezxAnOtdrFileFtpObjects | |||
| 1.3.6.1.4.1.3902.1083.5.2.2.3.1.1 | ScalarzxAnOtdrFileFtpIpAddressType | read-write | current | IP address type of the FTP server. |
| 1.3.6.1.4.1.3902.1083.5.2.2.3.1.2 | ScalarzxAnOtdrFileFtpIpAddress | read-write | current | IP address of the FTP server. |
| 1.3.6.1.4.1.3902.1083.5.2.2.3.1.3 | ScalarzxAnOtdrFileFtpProtocolType | read-write | current | Protocol type of the FTP server. ftp(1): File Transfer Protocol. sftp(2): Ssh File Transfer Protocol. |
| 1.3.6.1.4.1.3902.1083.5.2.2.3.1.4 | ScalarzxAnOtdrFileFtpUserName | read-write | current | User name of the FTP server. |
| 1.3.6.1.4.1.3902.1083.5.2.2.3.1.5 | ScalarzxAnOtdrFileFtpUserPwd | read-write | current | User password of the FTP server. |
| 1.3.6.1.4.1.3902.1083.5.2.2.3.1.6 | ScalarzxAnOtdrFileFtpPath | read-write | current | File path which starts from the root directory. |
| 1.3.6.1.4.1.3902.1083.5.2.2.3.1.7 | ScalarzxAnOtdrFileFtpFileName | read-write | current | The FTP file name. |
| 1.3.6.1.4.1.3902.1083.5.2.2.3.2 | TablezxAnOtdrFileFtpUploadStatusTable | not-accessible | current | OTDR file FTP status table. |
| 1.3.6.1.4.1.3902.1083.5.2.2.3.2.1 | RowzxAnOtdrFileFtpUploadStatusEntry | not-accessible | current | File FTP status entry. |
| 1.3.6.1.4.1.3902.1083.5.2.2.3.2.1.1 | ColumnzxAnOtdrFileFtpUploadFileName | not-accessible | current | OTDR test file name. |
| 1.3.6.1.4.1.3902.1083.5.2.2.3.2.1.2 | ColumnzxAnOtdrFileFtpUploadStatus | read-only | current | OTDR FTP status. |
| 1.3.6.1.4.1.3902.1083.5.2.2.3.2.1.3 | ColumnzxAnOtdrFileFtpUploadFailReason | read-only | current | OTDR FTP failed reason. |
| 1.3.6.1.4.1.3902.1083.5.2.3 | NodezxAnOtdrRoutineTestObjects | |||
| 1.3.6.1.4.1.3902.1083.5.2.3.2 | TablezxAnOtdrRoutineTaskIfTable | not-accessible | current | OTDR routine task interface table. |
| 1.3.6.1.4.1.3902.1083.5.2.3.2.1 | RowzxAnOtdrRoutineTaskIfEntry | not-accessible | current | OTDR routine task interface entry. The OTDR routine test consists of two steps, creating routine test ports (zxAnOtdrRoutineTaskIfTable), and then configuring … |
| 1.3.6.1.4.1.3902.1083.5.2.3.2.1.50 | ColumnzxAnOtdrRoutineTaskIfRowStatus | read-create | current | The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a man… |
| 1.3.6.1.4.1.3902.1083.5.2.3.3 | TablezxAnOtdrRoutineTaskTable | not-accessible | current | Routine test task table. |
| 1.3.6.1.4.1.3902.1083.5.2.3.3.1 | RowzxAnOtdrRoutineTaskEntry | not-accessible | current | Routine test task entry. |
| 1.3.6.1.4.1.3902.1083.5.2.3.3.1.1 | ColumnzxAnOtdrRoutineTaskName | not-accessible | current | OTDR routine test task name. |
| 1.3.6.1.4.1.3902.1083.5.2.3.3.1.2 | ColumnzxAnOtdrRoutineTaskStartTime | read-create | current | The start time of OTDR routine test. For example:yyyy-mm-dd HH:MM:SS.(2013-01-01 00:00:00). |
| 1.3.6.1.4.1.3902.1083.5.2.3.3.1.3 | ColumnzxAnOtdrRoutineTaskInterval | read-create | current | The interval of OTDR routine test. The NE returns 0, when zxAnOtdrRoutineTaskTestMode is sequential test. |
| 1.3.6.1.4.1.3902.1083.5.2.3.3.1.4 | ColumnzxAnOtdrRoutineTaskActiveStatus | read-create | current | OTDR routine test task active status. |
| 1.3.6.1.4.1.3902.1083.5.2.3.3.1.5 | ColumnzxAnOtdrRoutineTaskCurrStartTime | read-only | current | The current routine test task start time. |
| 1.3.6.1.4.1.3902.1083.5.2.3.3.1.6 | ColumnzxAnOtdrRoutineTaskOperStatus | read-only | current | OTDR routine test task operational status. |
| 1.3.6.1.4.1.3902.1083.5.2.3.3.1.7 | ColumnzxAnOtdrRoutineTaskFailedReason | read-only | current | The OTDR routine test task failed reason. |
| 1.3.6.1.4.1.3902.1083.5.2.3.3.1.8 | ColumnzxAnOtdrRoutineTaskResultFile | read-only | current | Routine test result file name. NE returns file name such as 'taskname-20120505143302.zip' when the routine test sucess. NE returns empty string when the routin… |
| 1.3.6.1.4.1.3902.1083.5.2.3.3.1.9 | ColumnzxAnOtdrRoutineTaskTestMode | read-create | current | Routine task test mode. |
| 1.3.6.1.4.1.3902.1083.5.2.3.3.1.50 | ColumnzxAnOtdrRoutineTaskRowStatus | read-create | current | The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a man… |
| 1.3.6.1.4.1.3902.1083.5.2.3.4 | TablezxAnOtdrRoutineTaskIfStatusTable | not-accessible | current | OTDR routine task interface status table |
| 1.3.6.1.4.1.3902.1083.5.2.3.4.1 | RowzxAnOtdrRoutineTaskIfStatusEntry | not-accessible | current | OTDR routine task interface status entry. |
| 1.3.6.1.4.1.3902.1083.5.2.3.4.1.1 | ColumnzxAnOtdrRoutineTaskIfStatus | read-only | current | The result status of OTDR routine test. |
| 1.3.6.1.4.1.3902.1083.5.2.3.4.1.2 | ColumnzxAnOtdrRoutineTaskIfFailReason | read-only | current | The OTDR routine test failed reason. |
| 1.3.6.1.4.1.3902.1083.5.2.4 | NodezxAnOtdrFtpServerObjects | |||
| 1.3.6.1.4.1.3902.1083.5.2.4.2 | TablezxAnOtdrFtpServerTable | not-accessible | current | FTP server configuration table. |
| 1.3.6.1.4.1.3902.1083.5.2.4.2.1 | RowzxAnOtdrFtpServerEntry | not-accessible | current | FTP server configuration entry. |
| 1.3.6.1.4.1.3902.1083.5.2.4.2.1.1 | ColumnzxAnOtdrFtpServerId | not-accessible | current | FTP server ID. |
| 1.3.6.1.4.1.3902.1083.5.2.4.2.1.2 | ColumnzxAnOtdrFtpServerIpAddressType | read-create | current | IP address type of the FTP server. |
| 1.3.6.1.4.1.3902.1083.5.2.4.2.1.3 | ColumnzxAnOtdrFtpServerIpAddress | read-create | current | IP address of the FTP server. |
| 1.3.6.1.4.1.3902.1083.5.2.4.2.1.4 | ColumnzxAnOtdrFtpServerProtocolType | read-create | current | Protocol type of the FTP server. ftp(1): File Transfer Protocol sftp(2): Ssh File Transfer Protocol |
| 1.3.6.1.4.1.3902.1083.5.2.4.2.1.5 | ColumnzxAnOtdrFtpServerUserName | read-create | current | User name of the FTP server. |
| 1.3.6.1.4.1.3902.1083.5.2.4.2.1.6 | ColumnzxAnOtdrFtpServerUserPwd | read-create | current | User password of the FTP server. |
| 1.3.6.1.4.1.3902.1083.5.2.4.2.1.7 | ColumnzxAnOtdrFtpServerPath | read-create | current | File path which starts from the root directory. |
| 1.3.6.1.4.1.3902.1083.5.2.4.2.1.50 | ColumnzxAnOtdrFtpServerRowStatus | read-create | current | The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a man… |
| 1.3.6.1.4.1.3902.1083.5.2.5 | NodezxAnOtdrAlgorithmObjects | |||
| 1.3.6.1.4.1.3902.1083.5.2.5.2 | TablezxAnOtdrAlgorithmTable | not-accessible | current | OTDR algorithm table. |
| 1.3.6.1.4.1.3902.1083.5.2.5.2.1 | RowzxAnOtdrAlgorithmEntry | not-accessible | current | OTDR algorithm entry. |
| 1.3.6.1.4.1.3902.1083.5.2.5.2.1.1 | ColumnzxAnOtdrAlgorithmRack | not-accessible | current | The rack No. of device to be used with OTDR. |
| 1.3.6.1.4.1.3902.1083.5.2.5.2.1.2 | ColumnzxAnOtdrAlgorithmShelf | not-accessible | current | The shelf No. of device to be used with OTDR. |
| 1.3.6.1.4.1.3902.1083.5.2.5.2.1.3 | ColumnzxAnOtdrAlgorithmSlot | not-accessible | current | The slot No. of device to be used with OTDR. |
| 1.3.6.1.4.1.3902.1083.5.2.5.2.1.4 | ColumnzxAnOtdrAlgorithmVersion | read-only | current | The OTDR algorithm version of current card. |
| 1.3.6.1.4.1.3902.1083.5.2.6 | NodezxAnOtdrTestCapacityObjects | |||
| 1.3.6.1.4.1.3902.1083.5.2.6.1 | NodezxAnOtdrTestCapDistanceObjects | |||
| 1.3.6.1.4.1.3902.1083.5.2.6.1.1 | NodezxAnOtdrTestCapDistanceGlbObjs | |||
| 1.3.6.1.4.1.3902.1083.5.2.6.1.1.1 | ScalarzxAnOtdrTestCapDistanceType | read-only | current | The type of the test capacity distance supported by OTDR. global(1): it means getting maximum-minimum distance by the global objects 'zxAnOtdrTestCapMaxDistanc… |
| 1.3.6.1.4.1.3902.1083.5.2.6.1.1.2 | ScalarzxAnOtdrTestCapMaxDistance | read-only | current | The maximum of the global test capacity distance supported by OTDR. |
| 1.3.6.1.4.1.3902.1083.5.2.6.1.1.3 | ScalarzxAnOtdrTestCapMinDistance | read-only | current | The minimum of the global test capacity distance supported by OTDR. |
| 1.3.6.1.4.1.3902.1083.5.2.6.1.2 | TablezxAnOtdrTestCapPwDistanceTable | not-accessible | current | OTDR test capacity pulse width distance table. |
| 1.3.6.1.4.1.3902.1083.5.2.6.1.2.1 | RowzxAnOtdrTestCapPwDistanceEntry | not-accessible | current | OTDR test capacity pulse width distance entry. |
| 1.3.6.1.4.1.3902.1083.5.2.6.1.2.1.1 | ColumnzxAnOtdrTestCapPwDistancePw | not-accessible | current | The pulse width supported by OTDR. A value less than 200000 is mapped to an integer pulse width value. A value greater than 200000 is mapped to a specific puls… |
| 1.3.6.1.4.1.3902.1083.5.2.6.1.2.1.2 | ColumnzxAnOtdrTestCapPwMaxDistance | read-only | current | The maximum of the test capacity distance supported by the current pulse width. |
| 1.3.6.1.4.1.3902.1083.5.2.6.1.2.1.3 | ColumnzxAnOtdrTestCapPwMinDistance | read-only | current | The minimum of the test capacity distance supported by the current pulse width. |
| 1.3.6.1.4.1.3902.1083.5.2.6.1.3 | TablezxAnOtdrTestCapCwDistanceTable | not-accessible | current | OTDR test capacity code width distance table. |
| 1.3.6.1.4.1.3902.1083.5.2.6.1.3.1 | RowzxAnOtdrTestCapCwDistanceEntry | not-accessible | current | OTDR test capacity code width distance entry. |
| 1.3.6.1.4.1.3902.1083.5.2.6.1.3.1.1 | ColumnzxAnOtdrTestCapCwDistanceCw | not-accessible | current | The code width supported by OTDR. |
| 1.3.6.1.4.1.3902.1083.5.2.6.1.3.1.2 | ColumnzxAnOtdrTestCapCwMaxDistance | read-only | current | The maximum of the test capacity distance supported by the current code width. |
| 1.3.6.1.4.1.3902.1083.5.2.6.1.3.1.3 | ColumnzxAnOtdrTestCapCwMinDistance | read-only | current | The minimum of the test capacity distance supported by the current code width. |
| 1.3.6.1.4.1.3902.1083.5.2.6.2 | NodezxAnOtdrTestCapDurationObjects | |||
| 1.3.6.1.4.1.3902.1083.5.2.6.2.1 | NodezxAnOtdrTestCapDurationGlbObjs | |||
| 1.3.6.1.4.1.3902.1083.5.2.6.2.1.1 | ScalarzxAnOtdrTestCapMaxDuration | read-only | current | The maximum of the test capacity duration supported by OTDR. |
| 1.3.6.1.4.1.3902.1083.5.2.6.2.1.2 | ScalarzxAnOtdrTestCapMinDuration | read-only | current | The minimum of the test capacity duration supported by OTDR. |
| 1.3.6.1.4.1.3902.1083.5.2.7 | NodezxAnOtdrTestTaskObjects | |||
| 1.3.6.1.4.1.3902.1083.5.2.7.1 | TablezxAnOtdrTestTaskStatusTable | not-accessible | current | OTDR test task status table. |
| 1.3.6.1.4.1.3902.1083.5.2.7.1.1 | RowzxAnOtdrTestTaskStatusEntry | not-accessible | current | OTDR test task status entry. |
| 1.3.6.1.4.1.3902.1083.5.2.7.1.1.1 | ColumnzxAnOtdrTestTaskId | not-accessible | current | OTDR test task ID. The task name is zxAnOtdrRoutineTaskName when the zxAnOtdrTestTaskType is routine, other tests relate to zxAnOtdrFastTestSn. |
| 1.3.6.1.4.1.3902.1083.5.2.7.1.1.2 | ColumnzxAnOtdrTestTaskStatus | read-only | current | The OTDR test task status. |
| 1.3.6.1.4.1.3902.1083.5.2.7.1.1.3 | ColumnzxAnOtdrTestTaskUnexecutedReason | read-only | current | The OTDR test task unexecuted reason. |
| 1.3.6.1.4.1.3902.1083.5.2.7.1.1.4 | ColumnzxAnOtdrTestTaskPriority | read-only | current | The OTDR test task priority. |
| 1.3.6.1.4.1.3902.1083.5.2.7.1.1.5 | ColumnzxAnOtdrTestTaskWaitingTime | read-only | current | The OTDR test task waiting time. When the task is in progress, the waiting time is 0. |
| 1.3.6.1.4.1.3902.1083.5.2.7.1.1.6 | ColumnzxAnOtdrTestTaskRequestSource | read-only | current | The OTDR test task request source. |
| 1.3.6.1.4.1.3902.1083.5.2.7.1.1.7 | ColumnzxAnOtdrTestTaskType | read-only | current | The task type. fast(1): - Fast test. health(2): - Health database test. adHoc(3): - Ad hoc test. reflector(4): - Reflector test. alarmTrigger(5): - Alarm trigg… |
| 1.3.6.1.4.1.3902.1083.5.2.7.1.1.8 | ColumnzxAnOtdrTestTaskStartTime | read-only | current | The test task starting time. |
| 1.3.6.1.4.1.3902.1083.5.2.7.1.1.9 | ColumnzxAnOtdrTestTaskRemainTimeout | read-only | current | The OTDR test task remaining timeout. A negative indicates the task should never be timeout. A zero indicates the task has been timeout. |
| 1.3.6.1.4.1.3902.1083.5.2.7.2 | TablezxAnOtdrFastTestTaskConfTable | not-accessible | current | OTDR fast test task configuration table. |
| 1.3.6.1.4.1.3902.1083.5.2.7.2.1 | RowzxAnOtdrFastTestTaskConfEntry | not-accessible | current | OTDR fast test task configuration entry. |
| 1.3.6.1.4.1.3902.1083.5.2.7.2.1.1 | ColumnzxAnOtdrFastTaskConfWaitTimeout | read-create | current | Fast test waiting timeout. The test will be cancelled when timeout. |
| 1.3.6.1.4.1.3902.1083.5.2.7.2.1.50 | ColumnzxAnOtdrFastTaskConfRowStatus | read-create | current | The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a man… |
| 1.3.6.1.4.1.3902.1083.5.2.8 | NodezxAnOtdrMonNodeObjects | |||
| 1.3.6.1.4.1.3902.1083.5.2.8.1 | NodezxAnOtdrMonNodeGlobalObjects | |||
| 1.3.6.1.4.1.3902.1083.5.2.8.1.1 | ScalarzxAnOtdrMonNodeMonitorStatus | read-only | current | OTDR node monitoring status. |
| 1.3.6.1.4.1.3902.1083.5.2.8.1.2 | ScalarzxAnOtdrMonNodeMonitorAction | read-write | current | OTDR node monitoring action. |
| 1.3.6.1.4.1.3902.1083.5.2.8.2 | TablezxAnOtdrMonNodeConfTable | not-accessible | current | OTDR monitoring node configuration table. |
| 1.3.6.1.4.1.3902.1083.5.2.8.2.1 | RowzxAnOtdrMonNodeConfEntry | not-accessible | current | OTDR monitoring node configuration entry. |
| 1.3.6.1.4.1.3902.1083.5.2.8.2.1.1 | ColumnzxAnOtdrMonNodeSn | not-accessible | current | OTDR monitoring node serial number. |
| 1.3.6.1.4.1.3902.1083.5.2.8.2.1.2 | ColumnzxAnOtdrMonNodePosition | read-only | current | OTDR monitoring node position. Value 0 means the monitoring node open/close test is not executed or the test is failed. |
| 1.3.6.1.4.1.3902.1083.5.2.8.2.1.3 | ColumnzxAnOtdrMonNodeStatus | read-only | current | OTDR monitoring node status. A zxAnOtdrMonNodeOpenedAlm trap will be sent when the zxAnOtdrMonNodeStatus is opened. A zxAnOtdrMonNodeOpenedClr trap will be sen… |
| 1.3.6.1.4.1.3902.1083.5.2.8.2.1.50 | ColumnzxAnOtdrNodeConfRowStatus | read-create | current | The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a man… |
| 1.3.6.1.4.1.3902.1083.5.2.8.3 | TablezxAnOtdrMonPortStatusTable | not-accessible | current | OTDR monitoring port status table. |
| 1.3.6.1.4.1.3902.1083.5.2.8.3.1 | RowzxAnOtdrMonPortStatusEntry | not-accessible | current | OTDR monitoring port status entry. |
| 1.3.6.1.4.1.3902.1083.5.2.8.3.1.1 | ColumnzxAnOtdrMonPortLinkStatus | read-only | current | OTDR monitoring port link status. A zxAnOtdrMonPortLinkAbnormalAlm trap will be sent when the zxAnOtdrMonPortLinkStatus is abnormal. A zxAnOtdrMonPortLinkAbnor… |
| 1.3.6.1.4.1.3902.1083.5.2.8.4 | TablezxAnOtdrMonReflectLabelTable | not-accessible | current | OTDR reflector labelling table. |
| 1.3.6.1.4.1.3902.1083.5.2.8.4.1 | RowzxAnOtdrMonReflectLabelEntry | not-accessible | current | OTDR reflector labelling entry. |
| 1.3.6.1.4.1.3902.1083.5.2.8.4.1.1 | ColumnzxAnOtdrMonReflectLabelAction | read-write | current | OTDR reflector labelling action. |
| 1.3.6.1.4.1.3902.1083.5.2.8.4.1.2 | ColumnzxAnOtdrMonReflectLabelStatus | read-only | current | OTDR reflector labelling status. |
| 1.3.6.1.4.1.3902.1083.5.2.8.4.1.3 | ColumnzxAnOtdrMonReflectLabelLastTime | read-only | current | OTDR reflector last labelling time. |
| 1.3.6.1.4.1.3902.1083.5.2.9 | NodezxAnOtdrOptModuleMonitorObjects | |||
| 1.3.6.1.4.1.3902.1083.5.2.9.1 | NodezxAnOtdrOptModuleGlobalObjects | |||
| 1.3.6.1.4.1.3902.1083.5.2.9.1.1 | ScalarzxAnOtdrOptModuleStatus | read-only | current | The OTDR optical module status. A zxAnOtdrOptModuleAbnormalAlm trap will be sent when the zxAnOtdrOptModuleStatus is abnormal. |
| 1.3.6.1.4.1.3902.1083.5.2.9.2 | TablezxAnOtdrOptModuleIfTable | not-accessible | current | OTDR optical module interface table. |
| 1.3.6.1.4.1.3902.1083.5.2.9.2.1 | RowzxAnOtdrOptModuleIfEntry | not-accessible | current | OTDR optical module interface entry. |
| 1.3.6.1.4.1.3902.1083.5.2.9.2.1.1 | ColumnzxAnOtdrOptModuleIfBasicPwr | read-only | current | OTDR interface basic optical power. '65535' means the basic optical power is invalid. |
| 1.3.6.1.4.1.3902.1083.5.2.9.2.1.2 | ColumnzxAnOtdrOptModuleIfCurrentPwr | read-only | current | OTDR interface current optical power. '65535' means the current optical power is invalid. |
| 1.3.6.1.4.1.3902.1083.5.2.9.2.1.3 | ColumnzxAnOtdrOptModuleIfPwrVaryThresh | read-write | current | OTDR interface optical power variaton threshold. A zxAnOtdrOptPowerVaryExceedAlm trap is sent when the difference value of zxAnOtdrOptModuleIfBasicPwr and zxAn… |
| 1.3.6.1.4.1.3902.1083.5.2.9.2.1.4 | ColumnzxAnOtdrOptModuleIfPwrAdjust | read-write | current | To adjust the OTDR basic optical power. |
| 1.3.6.1.4.1.3902.1083.5.2.10 | NodezxAnOtdrFaultLocateObjects | |||
| 1.3.6.1.4.1.3902.1083.5.2.10.1 | NodezxAnOtdrFaultLocateGlobalObjects | |||
| 1.3.6.1.4.1.3902.1083.5.2.10.1.1 | ScalarzxAnOtdrGlobalP2mpFaultLocatePrf | read-write | current | OTDR global P2MP fault locating threshold profile name. The global profile is applied to the interface when the interface fault locating profile is unconfigure… |
| 1.3.6.1.4.1.3902.1083.5.2.10.1.2 | ScalarzxAnOtdrGlobalP2pFaultLocatePrf | read-write | current | OTDR global P2P fault locating threshold profile name. The global profile is applied to the interface when the interface fault locating profile is unconfigured. |
| 1.3.6.1.4.1.3902.1083.5.2.10.2 | TablezxAnOtdrP2mpFaultLocatePrfTable | not-accessible | current | OTDR P2MP fault locating threshold profile table. |
| 1.3.6.1.4.1.3902.1083.5.2.10.2.1 | RowzxAnOtdrP2mpFaultLocatePrfEntry | not-accessible | current | OTDR P2MP fault locating threshold profile entry. |
| 1.3.6.1.4.1.3902.1083.5.2.10.2.1.1 | ColumnzxAnOtdrP2mpFaultLocatePrfName | not-accessible | current | OTDR P2MP fault locating threshold profile name. |
| 1.3.6.1.4.1.3902.1083.5.2.10.2.1.2 | ColumnzxAnOtdrP2mpPositionDiff | read-create | current | OTDR P2MP position difference threshold. |
| 1.3.6.1.4.1.3902.1083.5.2.10.2.1.3 | ColumnzxAnOtdrP2mpTrunkBrokenLossDiff | read-create | current | OTDR P2MP trunk broken insertion loss difference threshold. This threshold is used to locate trunk broken fault. |
| 1.3.6.1.4.1.3902.1083.5.2.10.2.1.4 | ColumnzxAnOtdrP2mpTrunkBrokenLoss | read-create | current | OTDR P2MP trunk broken insertion loss threshold. This threshold is used to locate trunk broken fault. |
| 1.3.6.1.4.1.3902.1083.5.2.10.2.1.5 | ColumnzxAnOtdrP2mpTrunkAttenLossDiff | read-create | current | OTDR P2MP trunk attenuation insertion loss difference threshold. This threshold is used to locate trunk attenuation fault. |
| 1.3.6.1.4.1.3902.1083.5.2.10.2.1.6 | ColumnzxAnOtdrP2mpTrunkAttenLoss | read-create | current | OTDR P2MP trunk attenuation insertion loss threshold. This threshold is used to locate trunk attenuation fault. |
| 1.3.6.1.4.1.3902.1083.5.2.10.2.1.7 | ColumnzxAnOtdrP2mpTrunkAbnPeakDiff | read-create | current | OTDR P2MP trunk abnormal reflective peak difference threshold. This threshold is used to locate trunk abnormal fault. |
| 1.3.6.1.4.1.3902.1083.5.2.10.2.1.8 | ColumnzxAnOtdrP2mpTrunkAbnRtnLoss | read-create | current | OTDR P2MP trunk abnormal return loss threshold. This threshold is used to locate trunk abnormal fault. |
| 1.3.6.1.4.1.3902.1083.5.2.10.2.1.9 | ColumnzxAnOtdrP2mpTrunkAbnLoss | read-create | current | OTDR P2MP trunk abnormal insertion loss threshold. This threshold is used to locate trunk abnormal fault. |
| 1.3.6.1.4.1.3902.1083.5.2.10.2.1.10 | ColumnzxAnOtdrP2mpBranchBrokenRtnLoss | read-create | current | OTDR P2MP branch broken return loss threshold. This threshold is used to locate branch broken fault. |
| 1.3.6.1.4.1.3902.1083.5.2.10.2.1.11 | ColumnzxAnOtdrP2mpBranchBrokenLoss | read-create | current | OTDR P2MP branch broken insertion loss threshold. This threshold is used to locate branch broken fault. |
| 1.3.6.1.4.1.3902.1083.5.2.10.2.1.12 | ColumnzxAnOtdrP2mpBranchBrokenPeakDiff | read-create | current | OTDR P2MP branch broken reflective peak difference threshold. This threshold is used to locate branch broken fault. |
| 1.3.6.1.4.1.3902.1083.5.2.10.2.1.13 | ColumnzxAnOtdrP2mpBranchAbnPeakDiff | read-create | current | OTDR P2MP branch abnormal reflective peak difference threshold. This threshold is used to locate branch abnormal fault. |
| 1.3.6.1.4.1.3902.1083.5.2.10.2.1.50 | ColumnzxAnOtdrP2mpFaultLocPrfRowStatus | read-create | current | The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a man… |
| 1.3.6.1.4.1.3902.1083.5.2.10.3 | TablezxAnOtdrP2pFaultLocatePrfTable | not-accessible | current | OTDR P2P fault locating threshold profile table. |
| 1.3.6.1.4.1.3902.1083.5.2.10.3.1 | RowzxAnOtdrP2pFaultLocatePrfEntry | not-accessible | current | OTDR P2P fault locating threshold profile entry. |
| 1.3.6.1.4.1.3902.1083.5.2.10.3.1.1 | ColumnzxAnOtdrP2pFaultLocatePrfName | not-accessible | current | OTDR P2P fault locating threshold profile name. |
| 1.3.6.1.4.1.3902.1083.5.2.10.3.1.2 | ColumnzxAnOtdrP2pPositionDiff | read-create | current | OTDR P2P position difference threshold. |
| 1.3.6.1.4.1.3902.1083.5.2.10.3.1.3 | ColumnzxAnOtdrP2pBrokenLossDiff | read-create | current | OTDR P2P link broken insertion loss difference threshold. This threshold is used to locate link broken fault. |
| 1.3.6.1.4.1.3902.1083.5.2.10.3.1.4 | ColumnzxAnOtdrP2pBrokenLoss | read-create | current | OTDR P2P link broken insertion loss threshold. This threshold is used to locate link broken fault. |
| 1.3.6.1.4.1.3902.1083.5.2.10.3.1.5 | ColumnzxAnOtdrP2pAttenuationLossDiff | read-create | current | OTDR P2P link attenuation insertion loss difference threshold. This threshold is used to locate link attenuation fault. |
| 1.3.6.1.4.1.3902.1083.5.2.10.3.1.6 | ColumnzxAnOtdrP2pAttenuationLoss | read-create | current | OTDR P2P link attenuation insertion loss threshold. This threshold is used to locate link attenuation fault. |
| 1.3.6.1.4.1.3902.1083.5.2.10.3.1.7 | ColumnzxAnOtdrP2pAbnormalPeakDiff | read-create | current | OTDR P2P link abnormal reflective peak difference threshold. This threshold is used to locate link abnormal fault. |
| 1.3.6.1.4.1.3902.1083.5.2.10.3.1.8 | ColumnzxAnOtdrP2pAbnormalReturnLoss | read-create | current | OTDR P2P link abnormal return loss threshold. This threshold is used to locate link abnormal fault. |
| 1.3.6.1.4.1.3902.1083.5.2.10.3.1.9 | ColumnzxAnOtdrP2pAbnormalLoss | read-create | current | OTDR P2P link abnormal insertion loss threshold. This threshold is used to locate link abnormal fault. |
| 1.3.6.1.4.1.3902.1083.5.2.10.3.1.50 | ColumnzxAnOtdrP2pFaultLocPrfRowStatus | read-create | current | The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a man… |
| 1.3.6.1.4.1.3902.1083.5.2.10.4 | TablezxAnOtdrFaultLocateIfConfTable | not-accessible | current | OTDR interface fault locating threshold profile table. |
| 1.3.6.1.4.1.3902.1083.5.2.10.4.1 | RowzxAnOtdrFaultLocateIfConfEntry | not-accessible | current | OTDR interface fault locating threshold profile entry. |
| 1.3.6.1.4.1.3902.1083.5.2.10.4.1.1 | ColumnzxAnOtdrFaultLocateIfP2mpPrf | read-create | current | OTDR fault locating P2MP threshold profile name. Empty string means unconfigured. |
| 1.3.6.1.4.1.3902.1083.5.2.10.4.1.2 | ColumnzxAnOtdrFaultLocateIfP2pPrf | read-create | current | OTDR fault locating P2P threshold profile name. Empty string means unconfigured. |
| 1.3.6.1.4.1.3902.1083.5.2.10.4.1.50 | ColumnzxAnOtdrFaultLocateIfRowStatus | read-create | current | The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a man… |
| 1.3.6.1.4.1.3902.1083.5.2.11 | NodezxAnOtdrEventObjects | |||
| 1.3.6.1.4.1.3902.1083.5.2.11.2 | TablezxAnOtdrIfEventBatchConfTable | not-accessible | current | OTDR interface event batch configuration table. |
| 1.3.6.1.4.1.3902.1083.5.2.11.2.1 | RowzxAnOtdrIfEventBatchConfEntry | not-accessible | current | OTDR interface event batch configuration entry. |
| 1.3.6.1.4.1.3902.1083.5.2.11.2.1.1 | ColumnzxAnOtdrIfEventBatchConfDevTypes | read-write | current | OTDR interface event device type list. The format of the value is as follows: '1:3-6,10;2:2,8'. It means that the device type value of the event ID including 3… |
| 1.3.6.1.4.1.3902.1083.5.2.11.3 | TablezxAnOtdrIfEventConfTable | not-accessible | current | OTDR interface event configuration table. |
| 1.3.6.1.4.1.3902.1083.5.2.11.3.1 | RowzxAnOtdrIfEventConfEntry | not-accessible | current | OTDR interface event configuration entry. |
| 1.3.6.1.4.1.3902.1083.5.2.11.3.1.1 | ColumnzxAnOtdrIfEventConfEventId | not-accessible | current | OTDR interface event ID. |
| 1.3.6.1.4.1.3902.1083.5.2.11.3.1.2 | ColumnzxAnOtdrIfEventConfDevType | read-write | current | OTDR interface event device type. Value 0 means the event device type is empty. |
| 1.3.6.1.4.1.3902.1083.5.2.11.3.1.3 | ColumnzxAnOtdrIfEventConfDevDesc | read-write | current | OTDR interface event device description. |
| 1.3.6.1.4.1.3902.1083.5.2.12 | NodezxAnOtdrAdaptiveTestObjects | |||
| 1.3.6.1.4.1.3902.1083.5.2.12.2 | NodezxAnOtdrAdaptiveTestLinkObjects | |||
| 1.3.6.1.4.1.3902.1083.5.2.12.2.1 | NodezxAnOtdrAdaptTestLinkGlbObjects | |||
| 1.3.6.1.4.1.3902.1083.5.2.12.2.1.2 | ScalarzxAnOtdrATLinkLossThresh | read-write | current | The global link loss threshold of the OTDR adaptive test. This global threshold is applied to the interface when the zxAnOtdrATLinkIfParamType is global(1). |
| 1.3.6.1.4.1.3902.1083.5.2.12.2.1.3 | ScalarzxAnOtdrATLinkRtnLossThresh | read-write | current | The global link return loss threshold of the OTDR adaptive test. This global threshold is applied to the interface when the zxAnOtdrATLinkIfParamType is global… |
| 1.3.6.1.4.1.3902.1083.5.2.12.2.2 | TablezxAnOtdrAdaptTestLinkIfConfTable | not-accessible | current | OTDR adaptive test link threshold interface configuration table. |
| 1.3.6.1.4.1.3902.1083.5.2.12.2.2.1 | RowzxAnOtdrAdaptTestLinkIfConfEntry | not-accessible | current | OTDR adaptive test link threshold interface configuration entry. |
| 1.3.6.1.4.1.3902.1083.5.2.12.2.2.1.1 | ColumnzxAnOtdrATLinkIfParamType | read-write | current | The link parameters type of the OTDR adaptive test. |
| 1.3.6.1.4.1.3902.1083.5.2.12.2.2.1.2 | ColumnzxAnOtdrATLinkIfLossThresh | read-write | current | The link loss threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATLinkIfParamType is userDefined(2). |
| 1.3.6.1.4.1.3902.1083.5.2.12.2.2.1.3 | ColumnzxAnOtdrATLinkIfRtnLossThresh | read-write | current | The link return loss threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATLinkIfParamType is userDefined(2). |
| 1.3.6.1.4.1.3902.1083.5.2.12.3 | NodezxAnOtdrAdaptiveTestDevObjects | |||
| 1.3.6.1.4.1.3902.1083.5.2.12.3.1 | NodezxAnOtdrAdaptTestDevGlbObjects | |||
| 1.3.6.1.4.1.3902.1083.5.2.12.3.1.2 | ScalarzxAnOtdrATDevFiberAttenThresh | read-write | current | The global device fiber attenuation threshold of the OTDR adaptive test. This global threshold is applied to the interface when the zxAnOtdrATDevIfParamType is… |
| 1.3.6.1.4.1.3902.1083.5.2.12.3.1.3 | ScalarzxAnOtdrATDevLossThresh | read-write | current | The global device loss threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATDevIfParamType is global(1). |
| 1.3.6.1.4.1.3902.1083.5.2.12.3.1.4 | ScalarzxAnOtdrATDevReflThresh | read-write | current | The global device reflectivity threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATDevIfParamType is global(1). |
| 1.3.6.1.4.1.3902.1083.5.2.12.3.1.5 | ScalarzxAnOtdrATDevConnLossThresh | read-write | current | The global device connector loss threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATDevIfParamType is global(1). |
| 1.3.6.1.4.1.3902.1083.5.2.12.3.1.6 | ScalarzxAnOtdrATDevConnReflThresh | read-write | current | The global device connector reflectivity threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATDevIfParamType is g… |
| 1.3.6.1.4.1.3902.1083.5.2.12.3.1.7 | ScalarzxAnOtdrATDevSpliceLossThresh | read-write | current | The global device splice loss threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATDevIfParamType is global(1). |
| 1.3.6.1.4.1.3902.1083.5.2.12.3.1.8 | ScalarzxAnOtdrATDevSpReflThresh | read-write | current | The global device splitter reflectivity threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATDevIfParamType is gl… |
| 1.3.6.1.4.1.3902.1083.5.2.12.3.1.9 | ScalarzxAnOtdrATDevSp2LossThresh | read-write | current | The global device splitter (the splitting ratio is 1:2 or 2:2) loss threshold of the OTDR adaptive test. This threshold is applied to the interface when the zx… |
| 1.3.6.1.4.1.3902.1083.5.2.12.3.1.10 | ScalarzxAnOtdrATDevSp4LossThresh | read-write | current | The global device splitter (the splitting ratio is 1:4 or 2:4) loss threshold of the the OTDR adaptive test. This threshold is applied to the interface when th… |
| 1.3.6.1.4.1.3902.1083.5.2.12.3.1.11 | ScalarzxAnOtdrATDevSp8LossThresh | read-write | current | The global device splitter (the splitting ratio is 1:8 or 2:8) loss threshold of the OTDR adaptive test. This threshold is applied to the interface when the zx… |
| 1.3.6.1.4.1.3902.1083.5.2.12.3.1.12 | ScalarzxAnOtdrATDevSp16LossThresh | read-write | current | The global device splitter (the splitting ratio is 1:16 or 2:16) loss threshold of the OTDR adaptive test. This threshold is applied to the interface when the … |
| 1.3.6.1.4.1.3902.1083.5.2.12.3.1.13 | ScalarzxAnOtdrATDevSp32LossThresh | read-write | current | The global device splitter (the splitting ratio is 1:32 or 2:32) loss threshold of the OTDR adaptive test. This threshold is applied to the interface when the … |
| 1.3.6.1.4.1.3902.1083.5.2.12.3.1.14 | ScalarzxAnOtdrATDevSp64LossThresh | read-write | current | The global device splitter (the splitting ratio is 1:64 or 2:64) loss threshold of the OTDR adaptive test. This threshold is applied to the interface when the … |
| 1.3.6.1.4.1.3902.1083.5.2.12.3.1.15 | ScalarzxAnOtdrATDevSp128LossThresh | read-write | current | The global device splitter (the splitting ratio is 1:128 or 2:128) loss threshold of the OTDR adaptive test. This threshold is applied to the interface when th… |
| 1.3.6.1.4.1.3902.1083.5.2.12.3.1.16 | ScalarzxAnOtdrATDevOnuReflThresh | read-write | current | The global device ONU reflectivity threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATDevIfParamType is global(… |
| 1.3.6.1.4.1.3902.1083.5.2.12.3.2 | TablezxAnOtdrAdaptTestDevIfConfTable | not-accessible | current | OTDR adaptive test device threshold interface configuration table. |
| 1.3.6.1.4.1.3902.1083.5.2.12.3.2.1 | RowzxAnOtdrAdaptTestDevIfConfEntry | not-accessible | current | OTDR adaptive test device threshold interface configuration evntry. |
| 1.3.6.1.4.1.3902.1083.5.2.12.3.2.1.1 | ColumnzxAnOtdrATDevIfParamType | read-write | current | The device parameters type of the OTDR adaptive test. |
| 1.3.6.1.4.1.3902.1083.5.2.12.3.2.1.2 | ColumnzxAnOtdrATDevIfFiberAttenThresh | read-write | current | The device fiber attenuation threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATDevIfParamType is userDefined(2… |
| 1.3.6.1.4.1.3902.1083.5.2.12.3.2.1.3 | ColumnzxAnOtdrATDevIfLossThresh | read-write | current | The device loss threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATDevIfParamType is userDefined(2). |
| 1.3.6.1.4.1.3902.1083.5.2.12.3.2.1.4 | ColumnzxAnOtdrATDevIfReflThresh | read-write | current | The device reflectivity threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATDevIfParamType is userDefined(2). |
| 1.3.6.1.4.1.3902.1083.5.2.12.3.2.1.5 | ColumnzxAnOtdrATDevIfConnLossThresh | read-write | current | The device connector loss threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATDevIfParamType is userDefined(2). |
| 1.3.6.1.4.1.3902.1083.5.2.12.3.2.1.6 | ColumnzxAnOtdrATDevIfConnReflThresh | read-write | current | The device connector reflectivity threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATDevIfParamType is userDefi… |
| 1.3.6.1.4.1.3902.1083.5.2.12.3.2.1.7 | ColumnzxAnOtdrATDevIfSpliceLossThresh | read-write | current | The device splice loss threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATDevIfParamType is userDefined(2). |
| 1.3.6.1.4.1.3902.1083.5.2.12.3.2.1.8 | ColumnzxAnOtdrATDevIfSpReflThresh | read-write | current | The device splitter reflectivity threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATDevIfParamType is userDefin… |
| 1.3.6.1.4.1.3902.1083.5.2.12.3.2.1.9 | ColumnzxAnOtdrATDevIfSp2LossThresh | read-write | current | The device splitter (the splitting ratio is 1:2 or 2:2) loss threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrA… |
| 1.3.6.1.4.1.3902.1083.5.2.12.3.2.1.10 | ColumnzxAnOtdrATDevIfSp4LossThresh | read-write | current | The device splitter (the splitting ratio is 1:4 or 2:4) loss threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrA… |
| 1.3.6.1.4.1.3902.1083.5.2.12.3.2.1.11 | ColumnzxAnOtdrATDevIfSp8LossThresh | read-write | current | The device splitter (the splitting ratio is 1:8 or 2:8) loss threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrA… |
| 1.3.6.1.4.1.3902.1083.5.2.12.3.2.1.12 | ColumnzxAnOtdrATDevIfSp16LossThresh | read-write | current | The device splitter (the splitting ratio is 1:16 or 2:16) loss threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtd… |
| 1.3.6.1.4.1.3902.1083.5.2.12.3.2.1.13 | ColumnzxAnOtdrATDevIfSp32LossThresh | read-write | current | The device splitter (the splitting ratio is 1:32 or 2:32) loss threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtd… |
| 1.3.6.1.4.1.3902.1083.5.2.12.3.2.1.14 | ColumnzxAnOtdrATDevIfSp64LossThresh | read-write | current | The device splitter (the splitting ratio is 1:64 or 2:64) loss threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtd… |
| 1.3.6.1.4.1.3902.1083.5.2.12.3.2.1.15 | ColumnzxAnOtdrATDevIfSp128LossThresh | read-write | current | The device splitter (the splitting ratio is 1:128 or 2:128) loss threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnO… |
| 1.3.6.1.4.1.3902.1083.5.2.12.3.2.1.16 | ColumnzxAnOtdrATDevIfOnuReflThresh | read-write | current | The device ONU reflectivity threshold of the OTDR adaptive test. This threshold is applied to the interface when the zxAnOtdrATDevIfParamType is userDefined(2). |
| 1.3.6.1.4.1.3902.1083.5.2.13 | NodezxAnOtdrDetectionLineObjects | |||
| 1.3.6.1.4.1.3902.1083.5.2.13.2 | TablezxAnOtdrDetectionLineConfTable | not-accessible | current | OTDR detection line configuration table. |
| 1.3.6.1.4.1.3902.1083.5.2.13.2.1 | RowzxAnOtdrDetectionLineConfEntry | not-accessible | current | OTDR detection line configuration entry. |
| 1.3.6.1.4.1.3902.1083.5.2.13.2.1.1 | ColumnzxAnOtdrDetectLineId | not-accessible | current | OTDR detection line ID. |
| 1.3.6.1.4.1.3902.1083.5.2.13.2.1.2 | ColumnzxAnOtdrDetectLineLength | read-only | current | OTDR detection line length. |
| 1.3.6.1.4.1.3902.1083.5.2.13.2.1.3 | ColumnzxAnOtdrDetectLineAlias | read-write | current | OTDR detection line alias. |
| 1.3.6.1.4.1.3902.1083.5.2.13.2.1.4 | ColumnzxAnOtdrDetectLinePositionDiff | read-write | current | OTDR detection line position difference threshold. |
| 1.3.6.1.4.1.3902.1083.5.2.13.2.1.5 | ColumnzxAnOtdrDetectLineAbnPeakDiff | read-write | current | OTDR detection line abnormal reflective peak difference threshold. |
| 1.3.6.1.4.1.3902.1083.5.2.13.2.1.6 | ColumnzxAnOtdrDetectLineStatus | read-only | current | OTDR detection line status. A zxAnOtdrDetectionLineAbnAlm trap will be sent when the zxAnOtdrDetectionLineStatus is peakAbnormal or fiberBroken. A zxAnOtdrDete… |
| 1.3.6.1.4.1.3902.1083.5.3 | NodezxAnOtdrNotifications | |||
| 1.3.6.1.4.1.3902.1083.5.3.1 | NotificationzxAnOtdrRoutineTaskFinished | current | A zxAnOtdrRoutineTaskFinished is sent when the agent has detected that the OTDR routine test task finished. | |
| 1.3.6.1.4.1.3902.1083.5.3.2 | NotificationzxAnOtdrPortTestFinished | current | A zxAnOtdrPortTestFinished is sent when the agent has detected that the OTDR port test finished. | |
| 1.3.6.1.4.1.3902.1083.5.3.50 | NodezxAnOtdrEnvTraps | |||
| 1.3.6.1.4.1.3902.1083.5.3.50.1 | NotificationzxAnOtdrEnvCtrlCardHighTempAlm | current | A zxAnOtdrEnvCtrlCardHighTempAlm trap is sent when the current control card temperature is higher than zxAnOtdrCtrlCardTempHighThresh. | |
| 1.3.6.1.4.1.3902.1083.5.3.50.2 | NotificationzxAnOtdrEnvCtrlCardHighTempClr | current | A zxAnOtdrEnvCtrlCardHighTempClr trap is sent when the current control card temperature is lower than zxAnOtdrCtrlCardTempHighThresh. | |
| 1.3.6.1.4.1.3902.1083.5.3.50.3 | NotificationzxAnOtdrEnvCtrlCardLowTempAlm | current | A zxAnOtdrEnvCtrlCardLowTempAlm trap is sent when the current control card temperature is lower than zxAnOtdrCtrlCardTempLowThresh. | |
| 1.3.6.1.4.1.3902.1083.5.3.50.4 | NotificationzxAnOtdrEnvCtrlCardLowTempClr | current | A zxAnOtdrEnvCtrlCardLowTempClr trap is sent when the current control card temperature is higher than zxAnOtdrCtrlCardTempLowThresh. | |
| 1.3.6.1.4.1.3902.1083.5.3.50.5 | NotificationzxAnOtdrEnvFanFailureAlm | current | A zxAnOtdrEnvFanFailureAlm trap is sent when the zxAnOtdrEnvFanStatus is abnormal. | |
| 1.3.6.1.4.1.3902.1083.5.3.50.6 | NotificationzxAnOtdrEnvFanFailureClr | current | A zxAnOtdrEnvFanFailureClr trap is sent when the zxAnOtdrEnvFanStatus is normal. | |
| 1.3.6.1.4.1.3902.1083.5.3.50.7 | NotificationzxAnOtdrEnvApdHighTempAlm | current | A zxAnOtdrEnvApdHighTempAlm trap is sent when the APD current temperature is higher than zxAnOtdrEnvApdTempHighThresh. | |
| 1.3.6.1.4.1.3902.1083.5.3.50.8 | NotificationzxAnOtdrEnvApdHighTempClr | current | A zxAnOtdrEnvApdHighTempClr trap is sent when the APD current temperature is lower than zxAnOtdrEnvApdTempHighThresh. | |
| 1.3.6.1.4.1.3902.1083.5.3.50.9 | NotificationzxAnOtdrEnvApdLowTempAlm | current | A zxAnOtdrEnvApdLowTempAlm trap is sent when the APD current temperature is lower than zxAnOtdrEnvApdTempLowThresh. | |
| 1.3.6.1.4.1.3902.1083.5.3.50.10 | NotificationzxAnOtdrEnvApdLowTempClr | current | A zxAnOtdrEnvApdLowTempClr trap is sent when the APD current temperature is higher than zxAnOtdrEnvApdTempLowThresh. | |
| 1.3.6.1.4.1.3902.1083.5.3.50.11 | NotificationzxAnOtdrPortUtilExceedAlm | current | A zxAnOtdrPortUtilExceedAlm trap is sent when the current port utilization is higher than zxAnOtdrPortUtilizationThresh. | |
| 1.3.6.1.4.1.3902.1083.5.3.50.12 | NotificationzxAnOtdrPortUtilExceedClr | current | A zxAnOtdrPortUtilExceedClr trap is sent when the current port utilization is lower than zxAnOtdrPortUtilizationThresh. | |
| 1.3.6.1.4.1.3902.1083.5.3.51 | NodezxAnOtdrMonNodeTraps | |||
| 1.3.6.1.4.1.3902.1083.5.3.51.1 | NotificationzxAnOtdrMonNodeOpenedAlm | current | A zxAnOtdrMonNodeOpenedAlm trap is sent when the zxAnOtdrMonNodeStatus is opened. | |
| 1.3.6.1.4.1.3902.1083.5.3.51.2 | NotificationzxAnOtdrMonNodeOpenedClr | current | A zxAnOtdrMonNodeOpenedClr trap is sent when the zxAnOtdrMonNodeStatus is closed. | |
| 1.3.6.1.4.1.3902.1083.5.3.51.3 | NotificationzxAnOtdrMonPortLinkAbnormalAlm | current | A zxAnOtdrMonPortLinkAbnormalAlm trap is sent when the zxAnOtdrMonPortLinkStatus is abnormal. | |
| 1.3.6.1.4.1.3902.1083.5.3.51.4 | NotificationzxAnOtdrMonPortLinkAbnormalClr | current | A zxAnOtdrMonPortLinkAbnormalClr trap is sent when the zxAnOtdrMonPortLinkStatus is normal. | |
| 1.3.6.1.4.1.3902.1083.5.3.52 | NodezxAnOtdrOptModuleMonitorTraps | |||
| 1.3.6.1.4.1.3902.1083.5.3.52.1 | NotificationzxAnOtdrOptModuleAbnormalAlm | current | A zxAnOtdrOptModuleAbnormalAlm is sent when the zxAnOtdrOptModuleStatus is abnormal. | |
| 1.3.6.1.4.1.3902.1083.5.3.52.2 | NotificationzxAnOtdrOptModuleAbnormalClr | current | A zxAnOtdrOptModuleAbnormalClr is sent when the zxAnOtdrOptModuleStatus is normal. | |
| 1.3.6.1.4.1.3902.1083.5.3.52.3 | NotificationzxAnOtdrOptPowerVaryExceedAlm | current | A zxAnOtdrOptPowerVaryExceedAlm trap is sent when the difference value of zxAnOtdrOptModuleIfBasicPwr and zxAnOtdrOptModuleIfCurrentPwr is higher than zxAnOtdr… | |
| 1.3.6.1.4.1.3902.1083.5.3.52.4 | NotificationzxAnOtdrOptPowerVaryExceedClr | current | A zxAnOtdrOptPowerVaryExceedClr trap is sent when the difference value of zxAnOtdrOptModuleIfBasicPwr and zxAnOtdrOptModuleIfCurrentPwr is lower than zxAnOtdrO… | |
| 1.3.6.1.4.1.3902.1083.5.3.53 | NodezxAnOtdrDetectionLineTraps | |||
| 1.3.6.1.4.1.3902.1083.5.3.53.1 | NotificationzxAnOtdrDetectionLineAbnAlm | current | A zxAnOtdrDetectionLineAbnAlm is sent when the zxAnOtdrDetectionLineStatus is peakAbnormal or brokenFiber. | |
| 1.3.6.1.4.1.3902.1083.5.3.53.2 | NotificationzxAnOtdrDetectionLineAbnClr | current | A zxAnOtdrDetectionAbnClr is sent when the zxAnOtdrDetectionLineStatus is normal. |