MIB Viewer

ZTE-AN-PON-BASE-MIB

94 objects
The MIB module for the management of PON.
OIDNameAccessStatusDescription
1.3.6.1.4.1.3902.1082.500.1IdentityzxAnPonBaseMibThe MIB module for the management of PON.
1.3.6.1.4.1.3902.1082.500.1.2NodezxAnPonBaseObjects
1.3.6.1.4.1.3902.1082.500.1.2.2NodezxAnPonOnuTypeObjects
1.3.6.1.4.1.3902.1082.500.1.2.2.2TablezxAnPonOnuTypeTablenot-accessiblecurrentConfiguration of ONU type.
1.3.6.1.4.1.3902.1082.500.1.2.2.2.1RowzxAnPonOnuTypeEntrynot-accessiblecurrentEntry of zxAnPonOnuTypeTable. For the default ONU type such as ZTE-F641,ZTE-F622, ZTE-F625, ZTE-F621, ZTE-F601, ZTE-F640, ZTE-F628, ZTE-9806, ZTE-D400, ZTE-D40…
1.3.6.1.4.1.3902.1082.500.1.2.2.2.1.1ColumnzxAnPonOnuTypeNamenot-accessiblecurrentName of ONU type.
1.3.6.1.4.1.3902.1082.500.1.2.2.2.1.2ColumnzxAnPonOnuTypePonTyperead-createcurrentPON type.There are two types: -epon: Ethernet Passive Optical Network -gpon: Gigabit-Capable PON.
1.3.6.1.4.1.3902.1082.500.1.2.2.2.1.3ColumnzxAnPonOnuTypeDescread-createcurrentDescription of ONU type. eg. the interface attributes of ONU type. This variable must comply with the multi-variables binding rule described in zxAnPonOnuTypeE…
1.3.6.1.4.1.3902.1082.500.1.2.2.2.1.4ColumnzxAnPonOnuTypeAttr1read-createcurrentFor EPON: This attribute indicates protect type, 1-none, 2-typeC, 3-typeD, default value is 1. For GPON: This attribute indicates the maximum number of T-CONT,…
1.3.6.1.4.1.3902.1082.500.1.2.2.2.1.5ColumnzxAnPonOnuTypeAttr2read-createcurrentFor EPON: This attribute indicates speed, 1-1G, 2-10G Symmetric, 3-10G Asymmetric, default value is 1. For GPON: This attribute indicates the maximum number of…
1.3.6.1.4.1.3902.1082.500.1.2.2.2.1.6ColumnzxAnPonOnuTypeAttr3read-createcurrentFor EPON: This attribute indicates ONU auto dispatch enable status, 1-enable, 2-disable, default value is 1. For GPON: This attribute indicates maximum number …
1.3.6.1.4.1.3902.1082.500.1.2.2.2.1.7ColumnzxAnPonOnuTypeAttr4read-createcurrentFor GPON: This attribute indicates maximum number of flow per switch, default value is 255. This attribute is not used for EPON. This variable must comply with…
1.3.6.1.4.1.3902.1082.500.1.2.2.2.1.8ColumnzxAnPonOnuTypeAttr5read-createcurrentFor GPON: This attribute indicates maximum number of IP host. MSB : Most Significant Byte LSB : Least Significant Byte | MSB | Byte 2 | Byte 1 | LSB | | | | |I…
1.3.6.1.4.1.3902.1082.500.1.2.2.2.1.9ColumnzxAnPonOnuTypeAttr6read-createcurrentFor GPON: This attribute indicates service ability of ONU type, there are three service mode :N:1,1:M,1:P. If support the service mode,set the corresponding bi…
1.3.6.1.4.1.3902.1082.500.1.2.2.2.1.10ColumnzxAnPonOnuTypeAttr7read-createcurrentThe OLT OMCI management mode. | MSB | Byte 2 | Byte 1 | LSB | | | Reserved | Reserved | Reserved |Reserved WiFi | | (8bits) | (8bits) | (8bits) |(7bits) (1bit)…
1.3.6.1.4.1.3902.1082.500.1.2.2.2.1.11ColumnzxAnPonOnuTypeAttr8read-createcurrentA set of capabilities information about ONU. | MSB |Byte2|Byte1| LSB | | |Rese-|Rese-|Rese-|Rese-| GIS |Extended| | |Multicast| OMCI | |rved |rved |rved |rved …
1.3.6.1.4.1.3902.1082.500.1.2.2.2.1.12ColumnzxAnPonOnuTypeAttr9read-createcurrentA set of capabilities information about ONU. | MSB | Byte 2 | Byte 1 | LSB | | | Reserved | Reserved | Reserved | VEIP Number | | (8bits) | (8bits) | (8bits) |…
1.3.6.1.4.1.3902.1082.500.1.2.2.2.1.13ColumnzxAnPonOnuTypeAttr10read-createcurrentA set of capabilities information about ONU. | MSB | Byte 2 | Byte 1 | LSB | | | Reserved | Reserved | Reserved |Reserved|Speed Mode| | (8bits) | (8bits) | (8b…
1.3.6.1.4.1.3902.1082.500.1.2.2.2.1.50ColumnzxAnPonOnuTypeRowStatusread-createcurrentThe status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a man…
1.3.6.1.4.1.3902.1082.500.1.2.2.3TablezxAnPonOnuIfAttrTablenot-accessiblecurrentConfiguration of ONU interface attributes.
1.3.6.1.4.1.3902.1082.500.1.2.2.3.1RowzxAnPonOnuIfAttrEntrynot-accessiblecurrentEntry of zxAnPonOnuIfAttrTable. Entries in the zxAnPonOnuIfAttrTable are created and deleted using the zxAnPonOnuIfAttrRowStatus object, modify is prohibited.
1.3.6.1.4.1.3902.1082.500.1.2.2.3.1.1ColumnzxAnPonOnuIfIdnot-accessiblecurrentThe most significant 16 bits indicate the type of this interface: ETH(10), E1(20), T1(21), DS1(22), POTS(30), RF(40), WiFi(50), COM(60), VEIP(70), xDSL(80). Th…
1.3.6.1.4.1.3902.1082.500.1.2.2.3.1.2ColumnzxAnPonOnuIfAttr1read-createcurrentReserved for future use.
1.3.6.1.4.1.3902.1082.500.1.2.2.3.1.3ColumnzxAnPonOnuIfAttr2read-createcurrentReserved for future use.
1.3.6.1.4.1.3902.1082.500.1.2.2.3.1.4ColumnzxAnPonOnuIfAttr3read-createcurrentReserved for future use.
1.3.6.1.4.1.3902.1082.500.1.2.2.3.1.5ColumnzxAnPonOnuIfAttr4read-createcurrentReserved for future use.
1.3.6.1.4.1.3902.1082.500.1.2.2.3.1.6ColumnzxAnPonOnuIfAttr5read-createcurrentReserved for future use.
1.3.6.1.4.1.3902.1082.500.1.2.2.3.1.7ColumnzxAnPonOnuIfAttr6read-createcurrentReserved for future use.
1.3.6.1.4.1.3902.1082.500.1.2.2.3.1.8ColumnzxAnPonOnuIfAttr7read-createcurrentReserved for future use.
1.3.6.1.4.1.3902.1082.500.1.2.2.3.1.9ColumnzxAnPonOnuIfAttr8read-createcurrentReserved for future use.
1.3.6.1.4.1.3902.1082.500.1.2.2.3.1.10ColumnzxAnPonOnuIfAttr9read-createcurrentReserved for future use.
1.3.6.1.4.1.3902.1082.500.1.2.2.3.1.11ColumnzxAnPonOnuIfAttr10read-createcurrentReserved for future use.
1.3.6.1.4.1.3902.1082.500.1.2.2.3.1.50ColumnzxAnPonOnuIfAttrRowStatusread-createcurrentThe status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a man…
1.3.6.1.4.1.3902.1082.500.1.2.4NodezxAnPonOamObjects
1.3.6.1.4.1.3902.1082.500.1.2.4.1NodezxAnPonRogueOnuMgmt
1.3.6.1.4.1.3902.1082.500.1.2.4.1.1NodezxAnPonRogueOnuCtrl
1.3.6.1.4.1.3902.1082.500.1.2.4.1.1.1ScalarzxAnPonRogueOnuOltIndexread-writecurrentSame as ifIndex: | |InterfaceType| rack No. | Shelf No. | Slot No.| Port No.| | 1 (4bits) | (4bits) | (8bits) | (8bits) | (8bits) | + The multi-variables bindi…
1.3.6.1.4.1.3902.1082.500.1.2.4.1.1.2ScalarzxAnPonRogueOnuIndexread-writecurrentRepresents the normal ONU index.
1.3.6.1.4.1.3902.1082.500.1.2.4.1.1.3ScalarzxAnPonRogueOnuStateread-writecurrentThis object indicates the control action. -rogueOn:open the transmit power. -rogueOff:close the transmit power. -shutDown:shutdown the transceiver.
1.3.6.1.4.1.3902.1082.500.1.2.4.1.1.4ScalarzxAnPonRogueOnuRecoverTimeread-writecurrentThis object indicates the recovery time. When 'zxAnPonRogueOnuState' is 'rogueOn', 'zxAnPonRogueOnuRecoverTime' is invalid.
1.3.6.1.4.1.3902.1082.500.1.2.4.1.2TablezxAnPonRogueOnuDetectInfoTablenot-accessiblecurrentThis table is defined to control rogue ONU.
1.3.6.1.4.1.3902.1082.500.1.2.4.1.2.1RowzxAnPonRogueOnuDetectInfoEntrynot-accessiblecurrentEntry of zxAnPonRogueOnuDetectInfoTable. The multi-variables binding rule should be complied with when a manager configures rogue ONU detect. According to this…
1.3.6.1.4.1.3902.1082.500.1.2.4.1.2.1.1ColumnzxAnRogueOnuSlotnot-accessiblecurrentThe OLT slot to be configured rogue ONU detection.
1.3.6.1.4.1.3902.1082.500.1.2.4.1.2.1.2ColumnzxAnRogueOnuDetectEnableread-writecurrentThis object indicates the rogue ONU detection mode. -enabled(1): enable the rogue ONU detection -disabled(2): disable the rogue ONU detection.
1.3.6.1.4.1.3902.1082.500.1.2.4.1.2.1.3ColumnzxAnRogueOnuLocatingEnableread-writecurrentThis object indicates the rogue ONU locating mode. -enabled(1): locating the rogue ONU -disabled(1): not locating the rogue ONU. When 'zxAnRogueOnuDetectEnable…
1.3.6.1.4.1.3902.1082.500.1.2.4.1.2.1.4ColumnzxAnRogueOnuAutoCloseEnableread-writecurrentThis object indicates the rogue ONU shutdown mode. -enabled(1): shutdown the rogue ONU automatically -disabled(2): shutdown the rogue ONU manually When 'zxAnRo…
1.3.6.1.4.1.3902.1082.500.1.2.4.1.3TablezxAnPonRogueOnuInfoTablenot-accessiblecurrentThis table is defined to get rogue ONU information.
1.3.6.1.4.1.3902.1082.500.1.2.4.1.3.1RowzxAnPonRogueOnuInfoEntrynot-accessiblecurrentIt is an entry in the zxAnPonRogueOnuInfoTable. The index 'ifIndex' represents the normal OLT index
1.3.6.1.4.1.3902.1082.500.1.2.4.1.3.1.1ColumnzxAnPonRogueOnuInstIndexnot-accessiblecurrentThe instance No. of the rogue ONU.
1.3.6.1.4.1.3902.1082.500.1.2.4.1.3.1.2ColumnzxAnPonRogueOnuAuthStatusread-onlycurrentThe rogue ONU authentication status, 'authenticated' means this ONU is authenticated and 'unauthenticated' means this ONU is discovered by OLT but not authenti…
1.3.6.1.4.1.3902.1082.500.1.2.4.1.3.1.3ColumnzxAnPonRogueOnuIdread-onlycurrentThe unique ONU ID of the specified PON port, value 0 means ONU is discovered by OLT but not authenticated.
1.3.6.1.4.1.3902.1082.500.1.2.4.1.3.1.4ColumnzxAnPonRogueOnuMacAddressread-onlycurrentThe MAC address of the rogue ONU, only for EPON ONU.
1.3.6.1.4.1.3902.1082.500.1.2.4.1.3.1.5ColumnzxAnPonRogueOnuSerialNumberread-onlycurrentThe SN of the rogue ONU, only for GPON ONU.
1.3.6.1.4.1.3902.1082.500.1.2.4.1.3.1.6ColumnzxAnPonRogueOnuDetectedTimeread-onlycurrentThe date and time when the rogue ONU is detected.
1.3.6.1.4.1.3902.1082.500.1.2.4.1.4TablezxAnPonPortRogueOnuConfTablenot-accessiblecurrentThe PON port rogue ONU management table. This table only is used for C600 serial.
1.3.6.1.4.1.3902.1082.500.1.2.4.1.4.1RowzxAnPonPortRogueOnuConfEntrynot-accessiblecurrentThe PON port rogue ONU management entry.
1.3.6.1.4.1.3902.1082.500.1.2.4.1.4.1.1ColumnzxAnPortRogueOnuLocatingEnableread-writecurrentThe rogue ONU locating mode. enabled(1): locating the rogue ONU disabled(2): not locating the rogue ONU.
1.3.6.1.4.1.3902.1082.500.1.2.4.1.4.1.2ColumnzxAnPortRogueOnuAutoCloseEnableread-writecurrentThe rogue ONU shutdown mode. enabled(1): shutdown the rogue ONU automatically disabled(2): shutdown the rogue ONU manually.
1.3.6.1.4.1.3902.1082.500.1.2.4.1.4.1.3ColumnzxAnPortRogueOnuDetectEnableread-writecurrentThe rogue ONU detection mode. enabled(1) enable the rogue ONU detection function disabled(2): disable the rogue ONU detection function.
1.3.6.1.4.1.3902.1082.500.1.2.4.2TablezxAnPonRxOpticalPowerTablenot-accessiblecurrentReceived optical power on OLT side from ONU.
1.3.6.1.4.1.3902.1082.500.1.2.4.2.1RowzxAnPonRxOpticalPowerEntrynot-accessiblecurrentEntry of zxAnPonRxOpticalPowerTable. The index 'zxAnPonOnuIndex' represents the normal ONU index.
1.3.6.1.4.1.3902.1082.500.1.2.4.2.1.1ColumnzxAnPonOnuIndexnot-accessiblecurrentThis attribute represents the index of ONU.
1.3.6.1.4.1.3902.1082.500.1.2.4.2.1.2ColumnzxAnPonRxOpticalPowerread-onlycurrentMeasured the received optical power. 65535000 means N/A, ONU is not in service. -80000 means no signal received.
1.3.6.1.4.1.3902.1082.500.1.2.4.4TablezxAnPonRxOpticalPowerThreshTablenot-accessiblecurrentReceived threshold of transceiver on OLT side.
1.3.6.1.4.1.3902.1082.500.1.2.4.4.1RowzxAnPonRxOpticalPowerThreshEntrynot-accessiblecurrentEntry of zxAnPonRxOpticalPowerThreshTable. The index 'zxAnPonOnuIndex' represents the normal ONU index.
1.3.6.1.4.1.3902.1082.500.1.2.4.4.1.1ColumnzxAnPonRxPowerRisingAlarmThreshread-writecurrentRising alarm threshold of received power.
1.3.6.1.4.1.3902.1082.500.1.2.4.4.1.2ColumnzxAnPonRxPowerFallingAlarmThreshread-writecurrentFalling alarm threshold of received power.
1.3.6.1.4.1.3902.1082.500.1.2.4.4.1.3ColumnzxAnPonRxPowerDetectPeriodread-writecurrentDetect period.
1.3.6.1.4.1.3902.1082.500.1.2.4.4.1.4ColumnzxAnPonRxPowerRestoreDefaultread-writecurrentThe action of the ONU, when do the action, the 'zxAnPonRxPowerRisingAlarmThresh' value and 'zxAnPonRxPowerFallingAlarmThresh' value will be restored to the sys…
1.3.6.1.4.1.3902.1082.500.1.2.5NodezxAnPonGisObjects
1.3.6.1.4.1.3902.1082.500.1.2.5.1NodezxAnPonGisGlobalObjects
1.3.6.1.4.1.3902.1082.500.1.2.5.1.1ScalarzxAnPonGisLongituderead-writecurrentThe longitude of the PON equipment.
1.3.6.1.4.1.3902.1082.500.1.2.5.1.2ScalarzxAnPonGisLatituderead-writecurrentThe latitude of the PON equipment.
1.3.6.1.4.1.3902.1082.500.1.2.5.1.3ScalarzxAnPonGisElevationread-writecurrentThe elevation of the PON equipment.
1.3.6.1.4.1.3902.1082.500.1.2.5.1.4ScalarzxAnPonGisHorizontalErrorread-writecurrentThe horizontal error of the PON equipment. It caused by the changing of horizontal location during the measurement.
1.3.6.1.4.1.3902.1082.500.1.2.5.1.5ScalarzxAnPonGisAltitudeErrorread-writecurrentThe altitude error of the PON equipment. It caused by the changing of altitude location during the measurement.
1.3.6.1.4.1.3902.1082.500.1.2.5.1.6ScalarzxAnPonGisAreaCoderead-writecurrentThe GIS area code of the PON equipment. It references from the latest version 2013 of NBS(National Bureau of Statistics of China), http://www.stats.gov.cn/tjsj…
1.3.6.1.4.1.3902.1082.500.1.2.5.1.7ScalarzxAnPonGisTimestampread-writecurrentThe timestamp of GIS generated by BUAPP. The offset time based on 0 hour 0 minute 0 second Jan 1st 1970 in seconds.
1.3.6.1.4.1.3902.1082.500.1.2.5.1.8ScalarzxAnPonGisDigestread-writecurrentThe GIS digest.
1.3.6.1.4.1.3902.1082.500.1.2.5.1.9ScalarzxAnPonGisCheckCoderead-writecurrentThe GIS check code. In order to prevent user input wrong information, the OLT will generate a new check code according to the calculation of above 8 variables,…
1.3.6.1.4.1.3902.1082.500.1.3NodezxAnPonBaseNotifications
1.3.6.1.4.1.3902.1082.500.1.3.1NodezxAnPonOamTraps
1.3.6.1.4.1.3902.1082.500.1.3.1.1NotificationzxAnPonRxPowerHighAlmcurrentAlarm for received power.
1.3.6.1.4.1.3902.1082.500.1.3.1.2NotificationzxAnPonRxPowerHighClrcurrentRestore of alarm for received power.
1.3.6.1.4.1.3902.1082.500.1.3.1.3NotificationzxAnPonRxPowerLowAlmcurrentAlarm for received power.
1.3.6.1.4.1.3902.1082.500.1.3.1.4NotificationzxAnPonRxPowerLowClrcurrentRestore of alarm for received power.
1.3.6.1.4.1.3902.1082.500.1.4NodezxAnPonBaseConformance
1.3.6.1.4.1.3902.1082.500.1.4.1NodezxAnPonCompliances
1.3.6.1.4.1.3902.1082.500.1.4.1.1CompliancezxAnPonCompliancecurrentThe compliance statement for entities which implement the ZTE-AN-PON-BASE-MIB.
1.3.6.1.4.1.3902.1082.500.1.4.2NodezxAnPonGroups
1.3.6.1.4.1.3902.1082.500.1.4.2.2GroupzxAnPonOnuTypeGroupcurrentA collection of objects for ONU type configuration.
1.3.6.1.4.1.3902.1082.500.1.4.2.4GroupzxAnPonOamGroupcurrentA collection of objects for OLT diagnose.
1.3.6.1.4.1.3902.1082.500.1.4.2.6GroupzxAnPonGisGroupcurrentA collection of objects for ONU gis configuration data.
1.3.6.1.4.1.3902.1082.500.1.4.2.20GroupzxAnPonTrapGroupcurrentA collection of notifications.