ZTE-AN-REMOTE-UNIT-FILE-MIB
57 objects
The MIB module for the file management of remote unit.
Imported Objects
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString RowStatus |
| ZTE-AN-SMI | zxAnSystem |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3902.1082.20.42 | IdentityzxAnRemoteUnitFileMib | The MIB module for the file management of remote unit. | ||
| 1.3.6.1.4.1.3902.1082.20.42.1 | NodezxAnRuFileGlobalObjects | |||
| 1.3.6.1.4.1.3902.1082.20.42.1.1 | ScalarzxAnRuConfigFileCapabilities | read-only | current | The management capabilities of remote unit configuration file updating. The bit value 1 means the function represented by this bit is supported by this equipme… |
| 1.3.6.1.4.1.3902.1082.20.42.2 | NodezxAnRuFileObjects | |||
| 1.3.6.1.4.1.3902.1082.20.42.2.1 | NodezxAnRuConfigFileObjects | |||
| 1.3.6.1.4.1.3902.1082.20.42.2.1.1 | NodezxAnRuCfManualUpdatingObjects | |||
| 1.3.6.1.4.1.3902.1082.20.42.2.1.1.1 | ScalarzxAnRuCfManualUpdatingList | read-write | current | The list of remote units, each remote unit consists of 'ifIndex'. |
| 1.3.6.1.4.1.3902.1082.20.42.2.1.1.2 | ScalarzxAnRuCfManualUpdatingOperAction | read-write | current | The configuration file operating action. Actions are defined as follows: 1 update all configuration files of remote unit 2 delete a configuration file from rem… |
| 1.3.6.1.4.1.3902.1082.20.42.2.1.1.3 | ScalarzxAnRuCfManualUpdatingFileTypeId | read-write | current | The configuration file type ID. The attribute is only valid when zxAnRuCfManualUpdatingOperAction equals 'delete(2)'. |
| 1.3.6.1.4.1.3902.1082.20.42.2.1.2 | TablezxAnRuConfigFileUpdateTable | not-accessible | current | Remote unit configuration file updating table. |
| 1.3.6.1.4.1.3902.1082.20.42.2.1.2.1 | RowzxAnRuConfigFileUpdateEntry | not-accessible | current | Remote unit configuration file updating entry. |
| 1.3.6.1.4.1.3902.1082.20.42.2.1.2.1.1 | ColumnzxAnRuFileRack | not-accessible | current | The rack No. of OLT. |
| 1.3.6.1.4.1.3902.1082.20.42.2.1.2.1.2 | ColumnzxAnRuFileShelf | not-accessible | current | The shelf No. of OLT. |
| 1.3.6.1.4.1.3902.1082.20.42.2.1.2.1.3 | ColumnzxAnRuFileSlot | not-accessible | current | The slot No. of OLT. |
| 1.3.6.1.4.1.3902.1082.20.42.2.1.2.1.4 | ColumnzxAnRuFilePort | not-accessible | current | The PON port No. of OLT. |
| 1.3.6.1.4.1.3902.1082.20.42.2.1.2.1.5 | ColumnzxAnRuConfigFileUpdateInstIndex | not-accessible | current | The No. of each instance. |
| 1.3.6.1.4.1.3902.1082.20.42.2.1.2.1.6 | ColumnzxAnRuConfigFileUpdateOnuList | read-create | current | The remote unit list in a PON port. The use of 32-octet specifies 256 ONUs. Each octet within this field specifies a set of eight ONUs, with the first octet sp… |
| 1.3.6.1.4.1.3902.1082.20.42.2.1.2.1.7 | ColumnzxAnRuConfigFileUpdateFileName | read-create | current | The configuration file name, and .XML file is supported. The file name of each instance cannot be duplicated. |
| 1.3.6.1.4.1.3902.1082.20.42.2.1.2.1.8 | ColumnzxAnRuConfigFileUpdateFileTypeId | read-create | current | The configuration file type ID. The attribute is only valid for GPON, different service requirements of user will use different file type ID. The value '0' ind… |
| 1.3.6.1.4.1.3902.1082.20.42.2.1.2.1.9 | ColumnzxAnRuConfigFileUpdateActiveMode | read-create | current | The configuration file activation mode. The attribute is only valid for GPON VoIP service. |
| 1.3.6.1.4.1.3902.1082.20.42.2.1.2.1.10 | ColumnzxAnRuConfigFileUpdateFLocation | read-create | current | The configuration file location. Location type is defined as following: 1: file comes from flash. 3: file comes from SD card. |
| 1.3.6.1.4.1.3902.1082.20.42.2.1.2.1.11 | ColumnzxAnRuConfigFileUpdateStorageDId | read-create | current | The ID of the storage device. The numbering rule is: When zxAnRuConfigFileUpdateFLocation is flash(1), the value is 1 and it indicates flash 1. When zxAnRuConf… |
| 1.3.6.1.4.1.3902.1082.20.42.2.1.2.1.50 | ColumnzxAnRuConfigFileUpdateRowStatus | read-create | current | The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a man… |
| 1.3.6.1.4.1.3902.1082.20.42.2.1.3 | TablezxAnRuCfUpdatingStatusTable | not-accessible | current | Remote unit configuration file updating status information table. Each item in this table records the updating result of remote unit configruation file last ti… |
| 1.3.6.1.4.1.3902.1082.20.42.2.1.3.1 | RowzxAnRuCfUpdatingStatusEntry | not-accessible | current | Remote unit configuration file updating status information entry. |
| 1.3.6.1.4.1.3902.1082.20.42.2.1.3.1.1 | ColumnzxAnRuCfOnu | not-accessible | current | The ONU number. |
| 1.3.6.1.4.1.3902.1082.20.42.2.1.3.1.2 | ColumnzxAnRuCfUpdatingStatusFileTypeId | not-accessible | current | The configuration file type ID. The attribute is only valid for GPON, different service requirements of user will use different file type ID. The value '0' ind… |
| 1.3.6.1.4.1.3902.1082.20.42.2.1.3.1.3 | ColumnzxAnRuCfUpdatingStatusFileName | read-only | current | The configuration file name. Null string indicates the attribute is invalid. |
| 1.3.6.1.4.1.3902.1082.20.42.2.1.3.1.4 | ColumnzxAnRuCfUpdatingStatusActiveMode | read-only | current | The configuration file activation mode. The attribute is only valid for GPON VoIP service, and for other type configuration file, this attribute value is uncon… |
| 1.3.6.1.4.1.3902.1082.20.42.2.1.3.1.5 | ColumnzxAnRuCfUpdatingStatusResult | read-only | current | The result status of updating configruation file. |
| 1.3.6.1.4.1.3902.1082.20.42.2.1.3.1.6 | ColumnzxAnRuCfUpdatingStatusFailReason | read-only | current | The failure reason of updating configruation file. |
| 1.3.6.1.4.1.3902.1082.20.42.2.1.3.1.7 | ColumnzxAnRuCfUpdatingStatusProgress | read-only | current | The percent of updating configruation file. |
| 1.3.6.1.4.1.3902.1082.20.42.2.1.3.1.8 | ColumnzxAnRuCfUpdatingStatusFLocation | read-only | current | The configuration file location. Location type is defined as following: 1: file comes from flash. 3: file comes from SD card. |
| 1.3.6.1.4.1.3902.1082.20.42.2.2 | NodezxAnRuConfigFile2Objects | |||
| 1.3.6.1.4.1.3902.1082.20.42.2.2.2 | TablezxAnRuConfFile2UpdateTable | not-accessible | current | Remote unit configuration file updating table. Update the ONU configuration file with standard defined procedure or private defined procedure. |
| 1.3.6.1.4.1.3902.1082.20.42.2.2.2.1 | RowzxAnRuConfFile2UpdateEntry | not-accessible | current | Remote unit configuration file updating entry. Update the ONU configuration file with standard defined procedure or private defined procedure |
| 1.3.6.1.4.1.3902.1082.20.42.2.2.2.1.1 | ColumnzxAnRuConfFile2UpdtRack | not-accessible | current | The rack No. of OLT. |
| 1.3.6.1.4.1.3902.1082.20.42.2.2.2.1.2 | ColumnzxAnRuConfFile2UpdtShelf | not-accessible | current | The shelf No. of OLT. |
| 1.3.6.1.4.1.3902.1082.20.42.2.2.2.1.3 | ColumnzxAnRuConfFile2UpdtSlot | not-accessible | current | The slot No. of OLT. |
| 1.3.6.1.4.1.3902.1082.20.42.2.2.2.1.4 | ColumnzxAnRuConfFile2UpdtPort | not-accessible | current | The PON port No. of OLT. |
| 1.3.6.1.4.1.3902.1082.20.42.2.2.2.1.5 | ColumnzxAnRuConfFile2UpdtOnu | not-accessible | current | The ONU No. |
| 1.3.6.1.4.1.3902.1082.20.42.2.2.2.1.6 | ColumnzxAnRuConfFile2UpdtFileTypeId | not-accessible | current | The configuration file type ID. The attribute is only valid for GPON, different service requirements of user will use different file type ID. The value '0' ind… |
| 1.3.6.1.4.1.3902.1082.20.42.2.2.2.1.7 | ColumnzxAnRuConfFile2UpdtFileName | read-create | current | The configuration file name. |
| 1.3.6.1.4.1.3902.1082.20.42.2.2.2.1.8 | ColumnzxAnRuConfFile2UpdtActMode | read-create | current | The configuration file activation mode. The value 1-3 is only valid for GPON VoIP service. |
| 1.3.6.1.4.1.3902.1082.20.42.2.2.2.1.50 | ColumnzxAnRuConfFile2UpdtRowStatus | read-create | current | The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a man… |
| 1.3.6.1.4.1.3902.1082.20.42.2.2.3 | TablezxAnRuConfFile2UpdateStatusTable | not-accessible | current | Remote unit configuration file updating status table. Each item in this table records the updating result of remote unit configruation file last time. |
| 1.3.6.1.4.1.3902.1082.20.42.2.2.3.1 | RowzxAnRuConfFile2UpdateStatusEntry | not-accessible | current | Remote unit configuration file updating status entry. |
| 1.3.6.1.4.1.3902.1082.20.42.2.2.3.1.1 | ColumnzxAnRuConfFile2UpdtStatFileName | read-only | current | The configuration file name. |
| 1.3.6.1.4.1.3902.1082.20.42.2.2.3.1.2 | ColumnzxAnRuConfFile2UpdtStatActMode | read-only | current | The configuration file activation mode. The value 1-3 is only valid for GPON VoIP service. |
| 1.3.6.1.4.1.3902.1082.20.42.2.2.3.1.3 | ColumnzxAnRuConfFile2UpdtStatStatus | read-only | current | The status of updating configuration file. |
| 1.3.6.1.4.1.3902.1082.20.42.2.2.3.1.4 | ColumnzxAnRuConfFile2UpdtStatFailRsn | read-only | current | The failed reason of updating configuration file. |
| 1.3.6.1.4.1.3902.1082.20.42.2.2.3.1.5 | ColumnzxAnRuConfFile2UpdtStatProgress | read-only | current | The progress of updating configuration file. |
| 1.3.6.1.4.1.3902.1082.20.42.4 | NodezxAnRuFileConformance | |||
| 1.3.6.1.4.1.3902.1082.20.42.4.1 | NodezxAnRuFileCompliances | |||
| 1.3.6.1.4.1.3902.1082.20.42.4.1.1 | CompliancezxAnRuFileCompliance | current | The compliance statement for SNMP entities which implement the ZTE-AN-REMOTE-UNIT-FILE-MIB. | |
| 1.3.6.1.4.1.3902.1082.20.42.4.2 | NodezxAnRuFileGroups | |||
| 1.3.6.1.4.1.3902.1082.20.42.4.2.1 | GroupzxAnRuFileUpdateGroup | current | The collection of objects which are used to configure remote unit configuration file updating management. It will keep the remote unit always running with this… |