ZTE-AN-SECURITY-CPUDEFEND-MIB
64 objects
New oid assignments for ACL Objects.
Imported Objects
| IF-MIB | ifIndex |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 MacAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DateAndTime RowStatus TEXTUAL-CONVENTION |
| ZTE-AN-IF-MIB | zxAnSubIfIndex |
| ZTE-AN-SMI | zxAnServiceSecurity |
| ZTE-AN-TC-MIB | VlanId |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3902.1082.70.25 | IdentityzxAnSecurityCpuDefendMib | New oid assignments for ACL Objects. | ||
| 1.3.6.1.4.1.3902.1082.70.25.1 | NodezxAnSecCpuDefendGlobalObjects | |||
| 1.3.6.1.4.1.3902.1082.70.25.1.100 | ScalarzxAnSecCpuCapabilities | read-only | current | The management capabilities of CPU defend. The bit value 1 means the function represented by this bit is supported by this equipment. bit 0: value 1 means zxAn… |
| 1.3.6.1.4.1.3902.1082.70.25.2 | NodezxAnSecCpuDefendObjects | |||
| 1.3.6.1.4.1.3902.1082.70.25.2.2 | NodezxAnSecCpuPktLimitObjects | |||
| 1.3.6.1.4.1.3902.1082.70.25.2.2.1 | NodezxAnSecCpuPktLimitGlobalObjects | |||
| 1.3.6.1.4.1.3902.1082.70.25.2.2.1.1 | ScalarzxAnSecCpuPktRateLimitAll | read-write | current | The rate limit of all packets that can be sent to CPU. Value 0 means unlimit. only C3XX support,C6XX not support anymore. |
| 1.3.6.1.4.1.3902.1082.70.25.2.2.1.2 | ScalarzxAnSecCpuPktLimitStatsResetAll | read-write | current | Reset all CPU packet limit statistics manually when it is set to '1'. When get this variable, always return 1. |
| 1.3.6.1.4.1.3902.1082.70.25.2.2.2 | TablezxAnSecCpuPktLimitConfTable | not-accessible | current | CPU packet limit configuration table. |
| 1.3.6.1.4.1.3902.1082.70.25.2.2.2.1 | RowzxAnSecCpuPktLimitConfEntry | not-accessible | current | An entry of zxAnSecCpuPktLimitConfTable. |
| 1.3.6.1.4.1.3902.1082.70.25.2.2.2.1.1 | ColumnzxAnSecCpuPktLimitConfProtoType | not-accessible | current | Protocol type. |
| 1.3.6.1.4.1.3902.1082.70.25.2.2.2.1.2 | ColumnzxAnSecCpuPktLimitConfPktLmtEn | read-write | current | Enable/disable the packet rate limit. only C3XX support,C6XX not support anymore. |
| 1.3.6.1.4.1.3902.1082.70.25.2.2.2.1.3 | ColumnzxAnSecCpuPktLimitConfRateLimit | read-write | current | The packet rate limit. |
| 1.3.6.1.4.1.3902.1082.70.25.2.2.3 | TablezxAnSecCpuPktLimitStatsTable | not-accessible | current | CPU packet limit statistic table. |
| 1.3.6.1.4.1.3902.1082.70.25.2.2.3.1 | RowzxAnSecCpuPktLimitStatsEntry | not-accessible | current | An entry of zxAnSecCpuPktLimitStatsTable. |
| 1.3.6.1.4.1.3902.1082.70.25.2.2.3.1.1 | ColumnzxAnSecCpuPktLimitType | not-accessible | current | CPU packet limit view type. |
| 1.3.6.1.4.1.3902.1082.70.25.2.2.3.1.2 | ColumnzxAnSecCpuPktLimitRack | not-accessible | current | Rack No.. When zxAnSecCpuPktLimitType is inband(1) or outband(2), this object should be 0. When zxAnSecCpuPktLimitType is slot(3), this object indicates the ra… |
| 1.3.6.1.4.1.3902.1082.70.25.2.2.3.1.3 | ColumnzxAnSecCpuPktLimitShelf | not-accessible | current | Shelf No.. When zxAnSecCpuPktLimitType is inband(1) or outband(2), this object should be 0. When zxAnSecCpuPktLimitType is slot(3), this object indicates the s… |
| 1.3.6.1.4.1.3902.1082.70.25.2.2.3.1.4 | ColumnzxAnSecCpuPktLimitSlot | not-accessible | current | Slot No.. When zxAnSecCpuPktLimitType is inband(1) or outband(2), this object should be 0. When zxAnSecCpuPktLimitType is slot(3), this object indicates the sl… |
| 1.3.6.1.4.1.3902.1082.70.25.2.2.3.1.5 | ColumnzxAnSecCpuPktLimitProtoType | not-accessible | current | Protocol type. |
| 1.3.6.1.4.1.3902.1082.70.25.2.2.3.1.6 | ColumnzxAnSecCpuPktLimitTotalPkts | read-only | current | Total packets. |
| 1.3.6.1.4.1.3902.1082.70.25.2.2.3.1.7 | ColumnzxAnSecCpuPktLimitDiscards | read-only | current | Discarded packets. |
| 1.3.6.1.4.1.3902.1082.70.25.2.2.3.1.8 | ColumnzxAnSecCpuPktLimitPktRate | read-only | current | Packet rate. |
| 1.3.6.1.4.1.3902.1082.70.25.2.2.3.1.9 | ColumnzxAnSecCpuPktLimitPeakRate | read-only | current | Packet peak rate. |
| 1.3.6.1.4.1.3902.1082.70.25.2.2.3.1.10 | ColumnzxAnSecCpuPktLimitPeakTime | read-only | current | The time of zxAnSecCpuPktLimitPeakRate happened. |
| 1.3.6.1.4.1.3902.1082.70.25.2.2.3.1.11 | ColumnzxAnSecCpuPktLimitDiscardSeconds | read-only | current | Discarding packet seconds. |
| 1.3.6.1.4.1.3902.1082.70.25.2.3 | NodezxAnSecCpuQueuePktLimitObjects | |||
| 1.3.6.1.4.1.3902.1082.70.25.2.3.1 | NodezxAnSecCpuQueuePktLmtGlbObjects | |||
| 1.3.6.1.4.1.3902.1082.70.25.2.3.1.1 | ScalarzxAnSecCpuQueuePktStatsResetAll | read-write | current | Reset all CPU queue packet statistics manually when it is set to '1'. When get this variable, always return 1. |
| 1.3.6.1.4.1.3902.1082.70.25.2.3.2 | TablezxAnSecCpuQueuePktLmtConfTable | not-accessible | current | CPU queue packet limit configuration table. |
| 1.3.6.1.4.1.3902.1082.70.25.2.3.2.1 | RowzxAnSecCpuQueuePktLmtConfEntry | not-accessible | current | An entry of zxAnSecCpuQueuePktLmtConfTable. |
| 1.3.6.1.4.1.3902.1082.70.25.2.3.2.1.1 | ColumnzxAnSecCpuQueuePktLmtQueueId | not-accessible | current | CPU queue ID. |
| 1.3.6.1.4.1.3902.1082.70.25.2.3.2.1.2 | ColumnzxAnSecCpuQueuePktLmtMaxRate | read-write | current | Maximum packet rate. The value 2147483647(0x7FFFFFFF) means no limit. Only queue 0 and queue 7 can be configured no limit. |
| 1.3.6.1.4.1.3902.1082.70.25.2.3.3 | TablezxAnSecCpuQueuePktLmtStatsTable | not-accessible | current | CPU queue packet limit configuration table. |
| 1.3.6.1.4.1.3902.1082.70.25.2.3.3.1 | RowzxAnSecCpuQueuePktLmtStatsEntry | not-accessible | current | An entry of zxAnSecCpuQueuePktLmtStatsTable. |
| 1.3.6.1.4.1.3902.1082.70.25.2.3.3.1.1 | ColumnzxAnSecCpuQueuePktLmtCurrRate | read-only | current | The current packet rate. |
| 1.3.6.1.4.1.3902.1082.70.25.2.3.3.1.2 | ColumnzxAnSecCpuQueuePktLmtPeakRate | read-only | current | The peak packet rate. |
| 1.3.6.1.4.1.3902.1082.70.25.2.3.3.1.3 | ColumnzxAnSecCpuQueuePktLmtPeakTime | read-only | current | The time when the peak packet rate happened. |
| 1.3.6.1.4.1.3902.1082.70.25.2.4 | NodezxAnSecCpuAclObjects | |||
| 1.3.6.1.4.1.3902.1082.70.25.2.4.1 | NodezxAnSecCpuAclGlobalObjects | |||
| 1.3.6.1.4.1.3902.1082.70.25.2.4.1.1 | ScalarzxAnSecCpuAclTcpPkts | read-only | current | Total number of TCP packets. |
| 1.3.6.1.4.1.3902.1082.70.25.2.4.1.2 | ScalarzxAnSecCpuAclUnmatchRuleTcpPkts | read-only | current | The number of TCP packets with unmactching ACL rules. |
| 1.3.6.1.4.1.3902.1082.70.25.2.4.2 | TablezxAnSecCpuAclConfTable | not-accessible | current | A table used to create or remove ACL. Filtering TCP packets based on matching relationship between ACL numbers and ACL rules. It is only supported by C600 seri… |
| 1.3.6.1.4.1.3902.1082.70.25.2.4.2.1 | RowzxAnSecCpuAclConfEntry | not-accessible | current | A list of entries of zxAnSecCpuAclConfTable. |
| 1.3.6.1.4.1.3902.1082.70.25.2.4.2.1.1 | ColumnzxAnSecCpuAclNumber | not-accessible | current | ACL number. |
| 1.3.6.1.4.1.3902.1082.70.25.2.4.2.1.50 | ColumnzxAnSecCpuAclRowStatus | read-create | current | The status of this conceptual row. The supported actions of this conceptual row only include: 'createAndGo' and 'destroy'. To create a row in this table, a man… |
| 1.3.6.1.4.1.3902.1082.70.25.2.4.3 | TablezxAnSecCpuAclTcpPktStatsTable | not-accessible | current | TCP packet statistic table. |
| 1.3.6.1.4.1.3902.1082.70.25.2.4.3.1 | RowzxAnSecCpuAclTcpPktStatsEntry | not-accessible | current | A list of entries of zxAnSecCpuAclTcpPktStatsTable. |
| 1.3.6.1.4.1.3902.1082.70.25.2.4.3.1.1 | ColumnzxAnSecCpuAclRuleId | not-accessible | current | ACL rule id. |
| 1.3.6.1.4.1.3902.1082.70.25.2.4.3.1.2 | ColumnzxAnSecCpuAclPermitTcpPkts | read-only | current | The number of permitted TCP packets. |
| 1.3.6.1.4.1.3902.1082.70.25.2.4.3.1.3 | ColumnzxAnSecCpuAclDenyTcpPkts | read-only | current | The number of denied TCP packets. |
| 1.3.6.1.4.1.3902.1082.70.25.2.4.3.1.4 | ColumnzxAnSecCpuAclIsnErrorDropTcpPkts | read-only | current | The number of dropped TCP packets with ISN error. |
| 1.3.6.1.4.1.3902.1082.70.25.2.4.3.1.5 | ColumnzxAnSecCpuAclUnmatchDropTcpPkts | read-only | current | The number of dropped TCP packets with unmatching any ACL rules. |
| 1.3.6.1.4.1.3902.1082.70.25.2.4.4 | TablezxAnSecCpuAclTcpConnStatusTable | not-accessible | current | TCP connection status table. |
| 1.3.6.1.4.1.3902.1082.70.25.2.4.4.1 | RowzxAnSecCpuAclTcpConnStatusEntry | not-accessible | current | A list of entries of zxAnSecCpuAclTcpConnStatusTable. |
| 1.3.6.1.4.1.3902.1082.70.25.2.4.4.1.1 | ColumnzxAnSecCpuAclTcpConnSessionId | not-accessible | current | The session ID of of the TCP connection. |
| 1.3.6.1.4.1.3902.1082.70.25.2.4.4.1.2 | ColumnzxAnSecCpuAclTcpConnSrcIpType | read-only | current | Source IP address type of the TCP connection. |
| 1.3.6.1.4.1.3902.1082.70.25.2.4.4.1.3 | ColumnzxAnSecCpuAclTcpConnSrcIp | read-only | current | Source IP address of the TCP connection. |
| 1.3.6.1.4.1.3902.1082.70.25.2.4.4.1.4 | ColumnzxAnSecCpuAclTcpConnSrcPort | read-only | current | Source port number of the TCP connection. |
| 1.3.6.1.4.1.3902.1082.70.25.2.4.4.1.5 | ColumnzxAnSecCpuAclTcpConnDestIpType | read-only | current | Destination IP address type of the TCP connection. |
| 1.3.6.1.4.1.3902.1082.70.25.2.4.4.1.6 | ColumnzxAnSecCpuAclTcpConnDestIp | read-only | current | Destination IP address of the TCP connection. |
| 1.3.6.1.4.1.3902.1082.70.25.2.4.4.1.7 | ColumnzxAnSecCpuAclTcpConnDestPort | read-only | current | Destination port number of the TCP connection. |
| 1.3.6.1.4.1.3902.1082.70.25.2.4.4.1.8 | ColumnzxAnSecCpuAclTcpConnStatus | read-only | current | Status of the TCP connection. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| ZxAnPacketLimitProtoType | INTEGER { all(1), arp(2), icmp(3), ssh(4), other(5), igmp(6), dhcp(7), pppoe(8), snmp(9), telnet(10), bfd(11), zesr(12), stp(13), lacp(14), lldp(15), otherBpdu(16), rip(17), bgp(18), ospf(19), isis(20), ldp(21), cfm(22), rs(23), ra(24), ns(25), na(26), icmpv6(27), dhcpv6(28), raps(29), mld(30), erps(31), ieee1588(32), pim(33), ntp(34), dhcpDiscover(35), padi(36), ftp(37), arpNetworkSide(51), arpUserSide(52), rsNetworkSide(53), rsUserSide(54), raNetworkSide(55), raUserSide(56), nsNetworkSide(57), nsUserSide(58), naNetworkSide(59), naUserSide(60), loopback(61) } | current | Packet limit protocol Type. The type all(1) is invalid in zxAnSecCpuPktLimitConfTable. |