ZTE-AN-SYS-MGMT-MIB
46 objects
This MIB defines managed objects of zte system management.
Imported Objects
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DateAndTime DisplayString MacAddress |
| ZTE-AN-SMI | zxAnSystem |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3902.1082.20.1 | IdentityzxAnSysMgmtMib | This MIB defines managed objects of zte system management. | ||
| 1.3.6.1.4.1.3902.1082.20.1.2 | NodezxAnSysMgmtObjects | |||
| 1.3.6.1.4.1.3902.1082.20.1.2.10 | NodezxAnSysConfigSaveObjects | |||
| 1.3.6.1.4.1.3902.1082.20.1.2.10.1 | NodezxAnSysConfigSaveGlobalObjects | |||
| 1.3.6.1.4.1.3902.1082.20.1.2.10.1.1 | ScalarzxAnSysConfigSavingAction | read-write | current | Save device configuration data to flash media. The configuration information is saved to startrun.dat. |
| 1.3.6.1.4.1.3902.1082.20.1.2.10.1.2 | NodezxAnSysConfigAutoSaveObjects | |||
| 1.3.6.1.4.1.3902.1082.20.1.2.10.1.2.2 | ScalarzxAnSysConfigAutoSaveMode | read-write | current | Automatic saving flash mode. |
| 1.3.6.1.4.1.3902.1082.20.1.2.10.1.2.4 | ScalarzxAnSysConfigAutoSaveDailyTime | read-write | current | The time of automatic saving flash daily. For example:HH:MM:SS.(02:22:33). This variable is valid if zxAnSysConfigAutoSaveMode is set to daily(2). |
| 1.3.6.1.4.1.3902.1082.20.1.2.10.1.2.5 | ScalarzxAnSysConfigAutoSaveOnceTime | read-write | current | The time of automatic saving flash once. This variable is valid if zxAnSysConfigAutoSaveMode is set to once(3). The default time is 2000-01-01 00:00:00. |
| 1.3.6.1.4.1.3902.1082.20.1.2.10.1.2.6 | ScalarzxAnSysConfigAutoSaveHoldOffTime | read-write | current | The hold off time of automatic saving flash when configuration data is changed. This variable is valid if zxAnSysConfigAutoSaveMode is set to configChanged(4) |
| 1.3.6.1.4.1.3902.1082.20.1.2.10.1.3 | ScalarzxAnSysConfigSaveStatus | read-only | current | The status of save flash operation. - success(1): The save flash operation is completed. - failed(2): The save flash operation is failed. - saving(3): The save… |
| 1.3.6.1.4.1.3902.1082.20.1.2.10.1.4 | ScalarzxAnSysConfigSaveProgress | read-only | current | The percentage of the progess when saving flash is executed . |
| 1.3.6.1.4.1.3902.1082.20.1.2.10.1.5 | ScalarzxAnSysConfigSaveFailedReason | read-only | current | The reason of saving flash operation failed. Possible values are: - noError(1): No error, saving flash successfully or no saving flash operation is excuted. - … |
| 1.3.6.1.4.1.3902.1082.20.1.2.20 | NodezxAnSysConfLockObjects | |||
| 1.3.6.1.4.1.3902.1082.20.1.2.20.1 | NodezxAnSysConfLockGlobalObjects | |||
| 1.3.6.1.4.1.3902.1082.20.1.2.20.1.1 | ScalarzxAnSysConfLockOwner | read-only | current | Current configuration lock owner of the system. - none(1): The configuration right is unlocked. - snmp(2): The configuration right is locked by snmp manager. -… |
| 1.3.6.1.4.1.3902.1082.20.1.2.20.1.2 | ScalarzxAnSysConfLockSnmp | read-write | current | Lock or unlock the configuration right of the system. When it is set to lock(1) by snmp manager, only SNMP manager has configuration right. |
| 1.3.6.1.4.1.3902.1082.20.1.2.30 | NodezxAnSysMgmtPlaneObjects | |||
| 1.3.6.1.4.1.3902.1082.20.1.2.30.1 | NodezxAnSysMgmtPlaneGlobalObjects | |||
| 1.3.6.1.4.1.3902.1082.20.1.2.30.1.3 | ScalarzxAnSysMgmtPlaneInbandEnable | read-write | current | Enable or disable inband management channel of the system. |
| 1.3.6.1.4.1.3902.1082.20.1.2.30.1.4 | ScalarzxAnSysMgmtPlaneOutOfBandMacAddr | read-write | current | Out of band MAC address of the NE. |
| 1.3.6.1.4.1.3902.1082.20.1.2.30.1.5 | ScalarzxAnSysMgmtPlaneInBandMacAddr | read-write | current | In-band MAC address of the NE. |
| 1.3.6.1.4.1.3902.1082.20.1.2.40 | NodezxAnSysProfileOperObjects | |||
| 1.3.6.1.4.1.3902.1082.20.1.2.40.1 | NodezxAnSysProfileOperGlobalObjects | |||
| 1.3.6.1.4.1.3902.1082.20.1.2.40.1.1 | ScalarzxAnSysProfileCategory | accessible-for-notify | current | This object indicates the category of profile. |
| 1.3.6.1.4.1.3902.1082.20.1.2.40.1.2 | ScalarzxAnSysProfileName | accessible-for-notify | current | This object is used to indicate the profile name. Empty string means that the profile does not support profile name. |
| 1.3.6.1.4.1.3902.1082.20.1.2.40.1.3 | ScalarzxAnSysProfileId | accessible-for-notify | current | This object is used to indicate the profile ID. Value 0 means that the profile does not support ID. |
| 1.3.6.1.4.1.3902.1082.20.1.2.40.1.4 | ScalarzxAnSysProfileInfo | accessible-for-notify | current | This object is used to indicate the profile information, such as showing the port list that the profile has been applied. |
| 1.3.6.1.4.1.3902.1082.20.1.2.50 | NodezxAnSysConfigChangedObjects | |||
| 1.3.6.1.4.1.3902.1082.20.1.2.50.1 | NodezxAnSysConfigChangedGlbObjects | |||
| 1.3.6.1.4.1.3902.1082.20.1.2.50.1.1 | ScalarzxAnSysLastConfManagerType | accessible-for-notify | current | Current configuration owner of the system. - snmp(1): The configuration changed by snmp manager. - console(2): The configuration changed by console user. - tel… |
| 1.3.6.1.4.1.3902.1082.20.1.2.50.1.2 | ScalarzxAnSysLastConfManagerLocation | accessible-for-notify | current | If the zxAnSysLastConfManagerType is snmp(1), the zxAnSysLastConfManagerLocation is the user's IP address. If the zxAnSysLastConfManagerType is console(2), the… |
| 1.3.6.1.4.1.3902.1082.20.1.3 | NodezxAnSysMgmtNotifications | |||
| 1.3.6.1.4.1.3902.1082.20.1.3.1 | NodezxAnSysConfigSaveTraps | |||
| 1.3.6.1.4.1.3902.1082.20.1.3.1.1 | NotificationzxAnSysConfigSaveFinished | current | Notifications when save configuration data operation finish. | |
| 1.3.6.1.4.1.3902.1082.20.1.3.2 | NodezxAnSysProfileOperTraps | |||
| 1.3.6.1.4.1.3902.1082.20.1.3.2.1 | NotificationzxAnSysDelAppliedPrfFailed | current | This notification will be sent to managemet system when a profile that has been applied is deleted. If profile supports name, zxAnSysProfileName must be filled… | |
| 1.3.6.1.4.1.3902.1082.20.1.3.3 | NodezxAnSysConfigChangedTraps | |||
| 1.3.6.1.4.1.3902.1082.20.1.3.3.1 | NotificationzxAnSysConfigChanged | current | This notification will be sent to managemet system when the configuration is changed. | |
| 1.3.6.1.4.1.3902.1082.20.1.4 | NodezxAnSysMgmtConformance | |||
| 1.3.6.1.4.1.3902.1082.20.1.4.1 | NodezxAnSysMgmtCompliances | |||
| 1.3.6.1.4.1.3902.1082.20.1.4.1.1 | CompliancezxAnSysMgmtCompliance | current | The compliance statement for entities which implement the ZTE-AN-SYS-MGMT-MIB. | |
| 1.3.6.1.4.1.3902.1082.20.1.4.2 | NodezxAnSysMgmtGroups | |||
| 1.3.6.1.4.1.3902.1082.20.1.4.2.1 | GroupzxAnSysConfGroup | current | A collection of objects which are used to provide system configuration information. | |
| 1.3.6.1.4.1.3902.1082.20.1.4.2.2 | GroupzxAnSysMgmtGroup | current | A collection of objects which are used to provide system management information. | |
| 1.3.6.1.4.1.3902.1082.20.1.4.2.3 | NotificationzxAnSysMgmtTrapGroup | current | A collection of objects which are used to provide trap information. |