ZTE-AN-UAPS-MIB
38 objects
The MIB module for the management of UAPS function.
Imported Objects
| IF-MIB | ifIndex |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TruthValue |
| ZTE-AN-SMI | zxAnBridge |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3902.1082.40.80 | IdentityzxAnUapsMib | The MIB module for the management of UAPS function. | ||
| 1.3.6.1.4.1.3902.1082.40.80.1 | NodezxAnUapsGlobalObjects | |||
| 1.3.6.1.4.1.3902.1082.40.80.1.1 | ScalarzxAnUapsCapabilities | read-only | current | The UAPS management capabilities of this equipment. The bit value 1 means the function represented by this bit is supported. portsTableSupported(0): value 1 me… |
| 1.3.6.1.4.1.3902.1082.40.80.2 | NodezxAnUapsObjects | |||
| 1.3.6.1.4.1.3902.1082.40.80.2.2 | TablezxAnUapsGroupTable | not-accessible | current | This table includes the managed objects of the UAPS group. |
| 1.3.6.1.4.1.3902.1082.40.80.2.2.1 | RowzxAnUapsGroupEntry | not-accessible | current | An entry in zxAnUapsGroupTable. |
| 1.3.6.1.4.1.3902.1082.40.80.2.2.1.1 | ColumnzxAnUapsGroupIndex | not-accessible | current | The index of UAPS group. |
| 1.3.6.1.4.1.3902.1082.40.80.2.2.1.2 | ColumnzxAnUapsGroupName | read-create | current | The name of UAPS group. |
| 1.3.6.1.4.1.3902.1082.40.80.2.2.1.3 | ColumnzxAnUapsPrimaryPortList | read-create | current | The primary UAPS ports. The maximum port numbers joined in this port list should not be more than 4. Each member of this variable is ifIndex of a port. |
| 1.3.6.1.4.1.3902.1082.40.80.2.2.1.4 | ColumnzxAnUapsSecondaryPortList | read-create | current | The secondary UAPS ports. The maximum port numbers joined in this port list should not be more than 4. Furthermore, the port numbers joined in this port list s… |
| 1.3.6.1.4.1.3902.1082.40.80.2.2.1.5 | ColumnzxAnUapsPortWorkingStatus | read-only | current | It indicates which port group is in working state. |
| 1.3.6.1.4.1.3902.1082.40.80.2.2.1.6 | ColumnzxAnUapsAutoFailbackEnable | read-create | current | Enables or disables recovery to the UAPS primary port automatically when the primary port is normal again. |
| 1.3.6.1.4.1.3902.1082.40.80.2.2.1.7 | ColumnzxAnUapsNextHopIpType | read-create | current | Next hop IP type. |
| 1.3.6.1.4.1.3902.1082.40.80.2.2.1.8 | ColumnzxAnUapsNextHopIp | read-create | current | Next hop IP. Only IPv4 is supported now. If it is 0.0.0.0, UAPS will not check the link of next hop. |
| 1.3.6.1.4.1.3902.1082.40.80.2.2.1.9 | ColumnzxAnUapsIpLinkType | read-create | current | The link type used to check IP link status. |
| 1.3.6.1.4.1.3902.1082.40.80.2.2.1.10 | ColumnzxAnUapsIpLinkCheckRetries | read-create | current | The retries of checking link status. |
| 1.3.6.1.4.1.3902.1082.40.80.2.2.1.11 | ColumnzxAnUapsIpLinkCheckTimeout | read-create | current | The timeout of checking link status. |
| 1.3.6.1.4.1.3902.1082.40.80.2.2.1.12 | ColumnzxAnUapsIpLinkStatus | read-only | current | The status of IP link. |
| 1.3.6.1.4.1.3902.1082.40.80.2.2.1.13 | ColumnzxAnUapsSwapMode | read-create | current | It indicates swap mode. common: If one port of working port list down, all ports will swap to slave port list. trunk: Only when all working ports down, ports w… |
| 1.3.6.1.4.1.3902.1082.40.80.2.2.1.14 | ColumnzxAnUapsForceSwap | read-create | current | Force to swap the primary and secondary ports. |
| 1.3.6.1.4.1.3902.1082.40.80.2.2.1.15 | ColumnzxAnUapsSwapReason | read-only | current | It indicates the reason of swap. failback(1): Primary port is recovery. failoverByPhyLinkDown(2): Primary port is in fault of physical layer. failoverByIpLinkD… |
| 1.3.6.1.4.1.3902.1082.40.80.2.2.1.16 | ColumnzxAnUapsSwapRequestInCache | read-only | current | It indicates the swap request in memory. |
| 1.3.6.1.4.1.3902.1082.40.80.2.2.1.17 | ColumnzxAnUapsSwapLastRequest | read-only | current | It indicates the last swap request. |
| 1.3.6.1.4.1.3902.1082.40.80.2.2.1.18 | ColumnzxAnUapsProtectionTime | read-create | current | The protection time of UAPS. When the fail time of port is larger than it, the UAPS module should failover to the secondary port. |
| 1.3.6.1.4.1.3902.1082.40.80.2.2.1.19 | ColumnzxAnUapsIsInProtectionTime | read-only | current | It indicates if the UAPS is in protection time status. |
| 1.3.6.1.4.1.3902.1082.40.80.2.2.1.20 | ColumnzxAnUapsSlavePortTxOptShutdown | read-create | current | If it is enabled, the slave port transmitted optical signal will be shutdown. |
| 1.3.6.1.4.1.3902.1082.40.80.2.2.1.21 | ColumnzxAnUapsFailureTime | read-only | current | It indicates the time since the secondary UAPS ports became in working or any port of this UAPS group was down. After the primary UAPS ports become in working … |
| 1.3.6.1.4.1.3902.1082.40.80.2.2.1.50 | ColumnzxAnUapsGroupRowStatus | read-create | current | The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager mu… |
| 1.3.6.1.4.1.3902.1082.40.80.2.3 | TablezxAnUapsPrimaryPortsTable | not-accessible | current | This table includes the primary ports of the UAPS group. |
| 1.3.6.1.4.1.3902.1082.40.80.2.3.1 | RowzxAnUapsPrimaryPortsEntry | not-accessible | current | An entry in zxAnUapsPrimaryPortsTable. |
| 1.3.6.1.4.1.3902.1082.40.80.2.3.1.50 | ColumnzxAnUapsPrimaryPortsRowStatus | read-create | current | The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager mu… |
| 1.3.6.1.4.1.3902.1082.40.80.2.4 | TablezxAnUapsSecondaryPortsTable | not-accessible | current | This table includes the secondary ports of the UAPS group. |
| 1.3.6.1.4.1.3902.1082.40.80.2.4.1 | RowzxAnUapsSecondaryPortsEntry | not-accessible | current | An entry in zxAnUapsSecondaryPortsTable. |
| 1.3.6.1.4.1.3902.1082.40.80.2.4.1.50 | ColumnzxAnUapsSecondaryPortsRowStatus | read-create | current | The status of this conceptual row. To create a row in this table, a manager must set this object to createAndGo(4). To delete a row in this table, a manager mu… |
| 1.3.6.1.4.1.3902.1082.40.80.3 | NodezxAnUapsNotifications | |||
| 1.3.6.1.4.1.3902.1082.40.80.3.1 | NotificationzxAnUapsSwappedTrap | current | It indicates the primary and secondary port of UAPS module has swapped. | |
| 1.3.6.1.4.1.3902.1082.40.80.3.2 | NotificationzxAnUapsSwappedAlm | current | A zxAnUapsSwappedAlm is sent when the agent has detected that the primary/secondary ports of UAPS module have swapped. | |
| 1.3.6.1.4.1.3902.1082.40.80.3.3 | NotificationzxAnUapsSwappedClr | current | A zxAnUapsSwappedClr trap is sent when the agent has detected that the zxAnUapsSwappedAlm is cleared manually. |