ZXR10-ACL-MIB
177 objects
The MIB module to describe the ACL protocol.
Imported Objects
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | ----experimental Counter Counter32 enterprises Gauge Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress RowStatus TEXTUAL-CONVENTION |
| ZXR10-SMI | zxr10 |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3902.3.1100 | Nodezxr10AclMIB | |||
| 1.3.6.1.4.1.3902.3.1100.1 | Identityzxr10ACL | The MIB module to describe the ACL protocol. | ||
| 1.3.6.1.4.1.3902.3.1100.1.1 | Tablezxr10IPv4ACLTable | not-accessible | current | IPv4 ACL Table |
| 1.3.6.1.4.1.3902.3.1100.1.1.1 | Rowzxr10IPv4ACLEntry | not-accessible | current | IPv4 ACL |
| 1.3.6.1.4.1.3902.3.1100.1.1.1.1 | Columnzxr10IPv4ACLName | read-only | current | ipv4-access-list WORD Name of an IPv4 access-list (1-31 characters) |
| 1.3.6.1.4.1.3902.3.1100.1.1.1.2 | Columnzxr10IPv4ACLRuleID | read-only | current | rule <1-2147483644> (Optional)ID of this rule |
| 1.3.6.1.4.1.3902.3.1100.1.1.1.3 | Columnzxr10IPv4ACLPermitDeny | read-only | current | deny Specify packets to reject permit Specify packets to forward |
| 1.3.6.1.4.1.3902.3.1100.1.1.1.4 | Columnzxr10IPv4ACLSrcAddr | read-only | current | A.B.C.D Source address |
| 1.3.6.1.4.1.3902.3.1100.1.1.1.5 | Columnzxr10IPv4ACLSrcWildcard | read-only | current | A.B.C.D Wildcard bits |
| 1.3.6.1.4.1.3902.3.1100.1.1.1.6 | Columnzxr10IPv4ACLSrcAny | read-only | current | Any source address |
| 1.3.6.1.4.1.3902.3.1100.1.1.1.7 | Columnzxr10IPv4ACLDestAddr | read-only | current | A.B.C.D Destination address |
| 1.3.6.1.4.1.3902.3.1100.1.1.1.8 | Columnzxr10IPv4ACLDestWildcard | read-only | current | A.B.C.D Destination wildcard bits |
| 1.3.6.1.4.1.3902.3.1100.1.1.1.9 | Columnzxr10IPv4ACLDestAny | read-only | current | Any destination address |
| 1.3.6.1.4.1.3902.3.1100.1.1.1.10 | Columnzxr10IPv4ACLProtocol | read-only | current | <0-255> An IP protocol number gre Generic Routing Encapsulation (47) icmp Internet Control Message Protocol(1) igmp Internet Group Management Protocol (2) ip A… |
| 1.3.6.1.4.1.3902.3.1100.1.1.1.11 | Columnzxr10IPv4ACLSrcOpr | read-only | current | eq (Optional)Match only packets on a given port number ge (Optional)Match only packets with a no lower port number le (Optional)Match only packets with a no gr… |
| 1.3.6.1.4.1.3902.3.1100.1.1.1.12 | Columnzxr10IPv4ACLSrcPort | read-only | current | <0-65535> Port number bootpc Bootstrap protocol (BOOTP) client (68) bootps Bootstrap protocol (BOOTP) server (67) domain Domain name service (DNS, 53) ntp Netw… |
| 1.3.6.1.4.1.3902.3.1100.1.1.1.13 | Columnzxr10IPv4ACLSrcPort2 | read-only | current | <0-65535> Port number bootpc Bootstrap protocol (BOOTP) client (68) bootps Bootstrap protocol (BOOTP) server (67) domain Domain name service (DNS, 53) ntp Netw… |
| 1.3.6.1.4.1.3902.3.1100.1.1.1.14 | Columnzxr10IPv4ACLDestOpr | read-only | current | eq (Optional)Match only packets on a given port number ge (Optional)Match only packets with a no lower port number le (Optional)Match only packets with a no gr… |
| 1.3.6.1.4.1.3902.3.1100.1.1.1.15 | Columnzxr10IPv4ACLDestPort | read-only | current | <0-65535> Port number bootpc Bootstrap protocol (BOOTP) client (68) bootps Bootstrap protocol (BOOTP) server (67) domain Domain name service (DNS, 53) ntp Netw… |
| 1.3.6.1.4.1.3902.3.1100.1.1.1.16 | Columnzxr10IPv4ACLDestPort2 | read-only | current | <0-65535> Port number bootpc Bootstrap protocol (BOOTP) client (68) bootps Bootstrap protocol (BOOTP) server (67) domain Domain name service (DNS, 53) ntp Netw… |
| 1.3.6.1.4.1.3902.3.1100.1.1.1.17 | Columnzxr10IPv4ACLTCPEstablish | read-only | current | (Optional)Match established connections |
| 1.3.6.1.4.1.3902.3.1100.1.1.1.18 | Columnzxr10IPv4ACLICMPType | read-only | current | 0-254|256 ICMP code 255 Any ICMP code alternate-address Alternate address (6) echo Echo (ping, 8) echo-reply Echo reply (0) information-reply Information repli… |
| 1.3.6.1.4.1.3902.3.1100.1.1.1.19 | Columnzxr10IPv4ACLICMPCode | read-only | current | 0-254|256 (Optional)ICMP code 255 Any ICMP code |
| 1.3.6.1.4.1.3902.3.1100.1.1.1.20 | Columnzxr10IPv4ACLPrecedence | read-only | current | <0-7> Precedence level |
| 1.3.6.1.4.1.3902.3.1100.1.1.1.21 | Columnzxr10IPv4ACLTOS | read-only | current | <0-15> Type of service(ToS) |
| 1.3.6.1.4.1.3902.3.1100.1.1.1.22 | Columnzxr10IPv4ACLDSCP | read-only | current | <0-63> DSCP value |
| 1.3.6.1.4.1.3902.3.1100.1.1.1.23 | Columnzxr10IPv4ACLStateFlag | read-only | current | Timerange enable or disable flag |
| 1.3.6.1.4.1.3902.3.1100.1.1.1.24 | Columnzxr10IPv4ACLTimerangeName | read-only | current | time-range (Optional)Configure time range |
| 1.3.6.1.4.1.3902.3.1100.1.1.1.25 | Columnzxr10IPv4ACLRowStatus | read-only | current | createAndGo(4) Configure IPv4 ACL or rule destroy(6) Delete IPv4 ACL or rule |
| 1.3.6.1.4.1.3902.3.1100.1.1.1.26 | Columnzxr10IPv4ACLFragment | read-only | current | Fragment enable or disable flag |
| 1.3.6.1.4.1.3902.3.1100.1.1.1.27 | Columnzxr10IPv4ACLTcpFlagOprBitMap | read-only | current | Match on the specify TCP flag bit. 1 means + , and 0 means -. Bit from low to high represents: first : ack second : fin third : psh fourth : rst fifth : syn si… |
| 1.3.6.1.4.1.3902.3.1100.1.1.1.28 | Columnzxr10IPv4ACLTcpFlagVlaBitMap | read-only | current | Match when the TCP flag set or not. 1 means setted , and 0 means not. Bit from low to high represents: first : ack second : fin third : psh fourth : rst fifth … |
| 1.3.6.1.4.1.3902.3.1100.1.1.1.29 | Columnzxr10IPv4ACLIpBitMap | read-only | current | Match on the specify ip flag bit. 1 means setted , and 0 means not. Bit from low to high represents: first : DSCP second : TOS third : Precedence fourth : ICMP… |
| 1.3.6.1.4.1.3902.3.1100.1.1.1.30 | Columnzxr10IPv4ACLTtlOpr | read-only | current | eq (Optional)Match only packets on a given ttl value ge (Optional)Match only packets with a no lower ttl value le (Optional)Match only packets with a no greate… |
| 1.3.6.1.4.1.3902.3.1100.1.1.1.31 | Columnzxr10IPv4ACLTtlValue | read-only | current | The TTL value |
| 1.3.6.1.4.1.3902.3.1100.1.1.1.32 | Columnzxr10IPv4ACLTtlBegin | read-only | current | The TTL value Begin |
| 1.3.6.1.4.1.3902.3.1100.1.1.1.33 | Columnzxr10IPv4ACLTtlEnd | read-only | current | The TTL value End |
| 1.3.6.1.4.1.3902.3.1100.1.1.1.34 | Columnzxr10IPv4ACLRuleType | read-only | current | The acl rule type |
| 1.3.6.1.4.1.3902.3.1100.1.2 | Tablezxr10IPv6ACLTable | not-accessible | current | IPv6 ACL Table |
| 1.3.6.1.4.1.3902.3.1100.1.2.1 | Rowzxr10IPv6ACLEntry | not-accessible | current | IPv6 ACL |
| 1.3.6.1.4.1.3902.3.1100.1.2.1.1 | Columnzxr10IPv6ACLName | read-only | current | ipv6-access-list WORD Name of an IPv6 access-list (1-31 characters) |
| 1.3.6.1.4.1.3902.3.1100.1.2.1.2 | Columnzxr10IPv6ACLRuleID | read-only | current | rule <1-2147483644> (Optional)ID of this rule |
| 1.3.6.1.4.1.3902.3.1100.1.2.1.3 | Columnzxr10IPv6ACLPermitDeny | read-only | current | deny Specify packets to reject permit Specify packets to forward |
| 1.3.6.1.4.1.3902.3.1100.1.2.1.4 | Columnzxr10IPv6ACLflowlabel | read-only | current | <0-1048575> Flowlabel value |
| 1.3.6.1.4.1.3902.3.1100.1.2.1.5 | Columnzxr10IPv6ACLSrcAddr | read-only | current | <X:X::X:X> Source address |
| 1.3.6.1.4.1.3902.3.1100.1.2.1.6 | Columnzxr10IPv6ACLSrcWildcard | read-only | current | <0-128> Source Wildcard |
| 1.3.6.1.4.1.3902.3.1100.1.2.1.7 | Columnzxr10IPv6ACLSrcAny | read-only | current | Any source address |
| 1.3.6.1.4.1.3902.3.1100.1.2.1.8 | Columnzxr10IPv6ACLDestAddr | read-only | current | <X:X::X:X> Destination address |
| 1.3.6.1.4.1.3902.3.1100.1.2.1.9 | Columnzxr10IPv6ACLDestWildcard | read-only | current | <0-128> Destination Wildcard |
| 1.3.6.1.4.1.3902.3.1100.1.2.1.10 | Columnzxr10IPv6ACLDestAny | read-only | current | Any destination address |
| 1.3.6.1.4.1.3902.3.1100.1.2.1.11 | Columnzxr10IPv6ACLProtocol | read-only | current | <0-255> An IP protocol number gre Generic Routing Encapsulation (47) icmp Internet Control Message Protocol(58) igmp Internet Group Management Protocol (2) ip … |
| 1.3.6.1.4.1.3902.3.1100.1.2.1.12 | Columnzxr10IPv6ACLSrcOpr | read-only | current | eq (Optional)Match only packets on a given port number ge (Optional)Match only packets with a no lower port number le (Optional)Match only packets with a no gr… |
| 1.3.6.1.4.1.3902.3.1100.1.2.1.13 | Columnzxr10IPv6ACLSrcPort | read-only | current | <0-65535> Port number bootpc Bootstrap protocol (BOOTP) client (68) bootps Bootstrap protocol (BOOTP) server (67) domain Domain name service (DNS, 53) ntp Netw… |
| 1.3.6.1.4.1.3902.3.1100.1.2.1.14 | Columnzxr10IPv6ACLSrcPort2 | read-only | current | <0-65535> Port number bootpc Bootstrap protocol (BOOTP) client (68) bootps Bootstrap protocol (BOOTP) server (67) domain Domain name service (DNS, 53) ntp Netw… |
| 1.3.6.1.4.1.3902.3.1100.1.2.1.15 | Columnzxr10IPv6ACLDestOpr | read-only | current | eq (Optional)Match only packets on a given port number ge (Optional)Match only packets with a no lower port number le (Optional)Match only packets with a no gr… |
| 1.3.6.1.4.1.3902.3.1100.1.2.1.16 | Columnzxr10IPv6ACLDestPort | read-only | current | <0-65535> Port number bootpc Bootstrap protocol (BOOTP) client (68) bootps Bootstrap protocol (BOOTP) server (67) domain Domain name service (DNS, 53) ntp Netw… |
| 1.3.6.1.4.1.3902.3.1100.1.2.1.17 | Columnzxr10IPv6ACLDestPort2 | read-only | current | <0-65535> Port number bootpc Bootstrap protocol (BOOTP) client (68) bootps Bootstrap protocol (BOOTP) server (67) domain Domain name service (DNS, 53) ntp Netw… |
| 1.3.6.1.4.1.3902.3.1100.1.2.1.18 | Columnzxr10IPv6ACLTCPEstablish | read-only | current | (Optional)Match established connections |
| 1.3.6.1.4.1.3902.3.1100.1.2.1.19 | Columnzxr10IPv6ACLTcpFlagOprBitMap | read-only | current | Match on the specify TCP flag bit. 1 means + , and 0 means -. Bit from low to high represents: first : ack second : fin third : psh fourth : rst fifth : syn si… |
| 1.3.6.1.4.1.3902.3.1100.1.2.1.20 | Columnzxr10IPv6ACLTcpFlagVlaBitMap | read-only | current | Match when the TCP flag set or not. 1 means setted , and 0 means not. Bit from low to high represents: first : ack second : fin third : psh fourth : rst fifth … |
| 1.3.6.1.4.1.3902.3.1100.1.2.1.21 | Columnzxr10IPv6ACLHeaderOptionBitMap | read-only | current | Matches if the specify IPv6 header is present. 1 means setted , and 0 means not. Bit from low to high represents: first : hop-by-hop second : destopts third : … |
| 1.3.6.1.4.1.3902.3.1100.1.2.1.22 | Columnzxr10IPv6ACLICMPType | read-only | current | 0-254|256 ICMP type 255 Any ICMP type destination-unreachable Destination unreachable (1) echo-reply Echo reply (129) echo-request Echo request (ping, 128) mld… |
| 1.3.6.1.4.1.3902.3.1100.1.2.1.23 | Columnzxr10IPv6ACLICMPCode | read-only | current | 0-254|256 ICMP code 255 Any ICMP code |
| 1.3.6.1.4.1.3902.3.1100.1.2.1.24 | Columnzxr10IPv6ACLDSCP | read-only | current | <0-63> DSCP value |
| 1.3.6.1.4.1.3902.3.1100.1.2.1.25 | Columnzxr10IPv6ACLStateFlag | read-only | current | Timerange enable or disable flag |
| 1.3.6.1.4.1.3902.3.1100.1.2.1.26 | Columnzxr10IPv6ACLTimerangeName | read-only | current | time-range (Optional)Configure time range |
| 1.3.6.1.4.1.3902.3.1100.1.2.1.27 | Columnzxr10IPv6ACLRowStatus | read-only | current | createAndGo(4) Configure IPv6 ACL or rule destroy(6) Delete IPv6 ACL or rule |
| 1.3.6.1.4.1.3902.3.1100.1.2.1.28 | Columnzxr10IPv6ACLIpBitMap | read-only | current | Match on the specify ip flag bit. 1 means setted , and 0 means not. Bit from low to high represents: first : DSCP second : (reserved, default value 0) third : … |
| 1.3.6.1.4.1.3902.3.1100.1.3 | Tablezxr10LinkACLTable | not-accessible | current | Link ACL |
| 1.3.6.1.4.1.3902.3.1100.1.3.1 | Rowzxr10LinkACLEntry | not-accessible | current | Link ACL |
| 1.3.6.1.4.1.3902.3.1100.1.3.1.1 | Columnzxr10LinkACLName | read-only | current | link-access-list WORD Name of an link access-list (1-31 characters) |
| 1.3.6.1.4.1.3902.3.1100.1.3.1.2 | Columnzxr10LinkACLRuleID | read-only | current | rule <1-2147483644> (Optional)ID of this rule |
| 1.3.6.1.4.1.3902.3.1100.1.3.1.3 | Columnzxr10LinkACLPermitDeny | read-only | current | deny Specify packets to reject permit Specify packets to forward |
| 1.3.6.1.4.1.3902.3.1100.1.3.1.4 | Columnzxr10LinkACLProtocol | read-only | current | <0-65535> Link protocal |
| 1.3.6.1.4.1.3902.3.1100.1.3.1.5 | Columnzxr10LinkACLSourceMAC | read-only | current | <xxxx.xxxx.xxxx> Source MAC address |
| 1.3.6.1.4.1.3902.3.1100.1.3.1.6 | Columnzxr10LinkACLSourceMACWildcard | read-only | current | <xxxx.xxxx.xxxx> Source MAC wildcard |
| 1.3.6.1.4.1.3902.3.1100.1.3.1.7 | Columnzxr10LinkACLSourceMACAny | read-only | current | any Any source MAC address |
| 1.3.6.1.4.1.3902.3.1100.1.3.1.8 | Columnzxr10LinkACLDestinationMAC | read-only | current | <xxxx.xxxx.xxxx> Destination MAC address |
| 1.3.6.1.4.1.3902.3.1100.1.3.1.9 | Columnzxr10LinkACLDestinationMACWildCard | read-only | current | <xxxx.xxxx.xxxx> Destination MAC wildcard |
| 1.3.6.1.4.1.3902.3.1100.1.3.1.10 | Columnzxr10LinkACLDestinationMACAny | read-only | current | any Any destination MAC address |
| 1.3.6.1.4.1.3902.3.1100.1.3.1.11 | Columnzxr10LinkACLIncos | read-only | current | <0-7> Value of inner cos |
| 1.3.6.1.4.1.3902.3.1100.1.3.1.12 | Columnzxr10LinkACLOutCos | read-only | current | <0-7> Value of outer cos |
| 1.3.6.1.4.1.3902.3.1100.1.3.1.13 | Columnzxr10LinkACLInVlanIDBegin | read-only | current | <1-4094> Value of inner vlan |
| 1.3.6.1.4.1.3902.3.1100.1.3.1.14 | Columnzxr10LinkACLOutVlanIDBegin | read-only | current | <1-4094> Value of outer vlan |
| 1.3.6.1.4.1.3902.3.1100.1.3.1.15 | Columnzxr10LinkACLStateFlag | read-only | current | Timerange enable or disable flag |
| 1.3.6.1.4.1.3902.3.1100.1.3.1.16 | Columnzxr10LinkACLTimerangeName | read-only | current | time-range (Optional)Configure time range WORD Time range name (1-31 characters) |
| 1.3.6.1.4.1.3902.3.1100.1.3.1.17 | Columnzxr10LinkACLRowStatus | read-only | current | createAndGo(4) Configure ACL or rule destroy(6) Delete ACL or rule |
| 1.3.6.1.4.1.3902.3.1100.1.3.1.18 | Columnzxr10LinkACLLinkBitMap | read-only | current | Match on the specify limk flag bit. 1 means setted , and 0 means not. Bit from low to high represents: first : in cos second : out cos third : in vlan fourth :… |
| 1.3.6.1.4.1.3902.3.1100.1.3.1.19 | Columnzxr10LinkACLInVlanIDEnd | read-only | current | <1-4094> Value of inner vlan |
| 1.3.6.1.4.1.3902.3.1100.1.3.1.20 | Columnzxr10LinkACLOutVlanIDEnd | read-only | current | <1-4094> Value of outer vlan |
| 1.3.6.1.4.1.3902.3.1100.1.4 | Tablezxr10IPv4MixedACLTable | not-accessible | current | IPv4 Mixed ACL Table |
| 1.3.6.1.4.1.3902.3.1100.1.4.1 | Rowzxr10IPv4MixedACLEntry | not-accessible | current | IPv4Mixed ACL |
| 1.3.6.1.4.1.3902.3.1100.1.4.1.1 | Columnzxr10IPv4MixedACLName | read-only | current | IPv4Mixed-access-list WORD Name of an IPv4 mixed access-list (1-31 characters) |
| 1.3.6.1.4.1.3902.3.1100.1.4.1.2 | Columnzxr10IPv4MixedACLRuleID | read-only | current | rule <1-2147483644> (Optional)ID of this rule |
| 1.3.6.1.4.1.3902.3.1100.1.4.1.3 | Columnzxr10IPv4MixedACLPermitDeny | read-only | current | deny Specify packets to reject permit Specify packets to forward |
| 1.3.6.1.4.1.3902.3.1100.1.4.1.4 | Columnzxr10IPv4MixedACLLinkProtocol | read-only | current | <0-65535> Link protocal |
| 1.3.6.1.4.1.3902.3.1100.1.4.1.5 | Columnzxr10IPv4MixedACLSourceMAC | read-only | current | <xxxx.xxxx.xxxx> Source MAC address |
| 1.3.6.1.4.1.3902.3.1100.1.4.1.6 | Columnzxr10IPv4MixedACLSourceMACWildcard | read-only | current | <xxxx.xxxx.xxxx> Source MAC wildcard |
| 1.3.6.1.4.1.3902.3.1100.1.4.1.7 | Columnzxr10IPv4MixedACLSourceMACAny | read-only | current | any Any source MAC address |
| 1.3.6.1.4.1.3902.3.1100.1.4.1.8 | Columnzxr10IPv4MixedACLDestinationMAC | read-only | current | <xxxx.xxxx.xxxx> Destination MAC address |
| 1.3.6.1.4.1.3902.3.1100.1.4.1.9 | Columnzxr10IPv4MixedACLDestinationMACWildCard | read-only | current | <xxxx.xxxx.xxxx> Destination MAC wildcard |
| 1.3.6.1.4.1.3902.3.1100.1.4.1.10 | Columnzxr10IPv4MixedACLDestinationMACAny | read-only | current | any Any destination MAC address |
| 1.3.6.1.4.1.3902.3.1100.1.4.1.11 | Columnzxr10IPv4MixedACLIncos | read-only | current | <0-7> Value of inner cos |
| 1.3.6.1.4.1.3902.3.1100.1.4.1.12 | Columnzxr10IPv4MixedACLOutCos | read-only | current | <0-7> Value of outer cos |
| 1.3.6.1.4.1.3902.3.1100.1.4.1.13 | Columnzxr10IPv4MixedACLInVlanIDBegin | read-only | current | <1-4094> Value of inner vlan |
| 1.3.6.1.4.1.3902.3.1100.1.4.1.14 | Columnzxr10IPv4MixedACLOutVlanIDBegin | read-only | current | <1-4094> Value of outer vlan |
| 1.3.6.1.4.1.3902.3.1100.1.4.1.15 | Columnzxr10IPv4MixedACLSrcAddr | read-only | current | A.B.C.D Source address |
| 1.3.6.1.4.1.3902.3.1100.1.4.1.16 | Columnzxr10IPv4MixedACLSrcWildcard | read-only | current | A.B.C.D Wildcard bits |
| 1.3.6.1.4.1.3902.3.1100.1.4.1.17 | Columnzxr10IPv4MixedACLSrcAny | read-only | current | Any source address |
| 1.3.6.1.4.1.3902.3.1100.1.4.1.18 | Columnzxr10IPv4MixedACLDestAddr | read-only | current | A.B.C.D Destination address |
| 1.3.6.1.4.1.3902.3.1100.1.4.1.19 | Columnzxr10IPv4MixedACLDestWildcard | read-only | current | A.B.C.D Destination wildcard bits |
| 1.3.6.1.4.1.3902.3.1100.1.4.1.20 | Columnzxr10IPv4MixedACLDestAny | read-only | current | Any destination address |
| 1.3.6.1.4.1.3902.3.1100.1.4.1.21 | Columnzxr10IPv4MixedACLProtocol | read-only | current | <0-255> An IP protocol number gre Generic Routing Encapsulation (47) icmp Internet Control Message Protocol(1) igmp Internet Group Management Protocol (2) ip A… |
| 1.3.6.1.4.1.3902.3.1100.1.4.1.22 | Columnzxr10IPv4MixedACLSrcOpr | read-only | current | eq (Optional)Match only packets on a given port number ge (Optional)Match only packets with a no lower port number le (Optional)Match only packets with a no gr… |
| 1.3.6.1.4.1.3902.3.1100.1.4.1.23 | Columnzxr10IPv4MixedACLSrcPort | read-only | current | <0-65535> Port number bootpc Bootstrap protocol (BOOTP) client (68) bootps Bootstrap protocol (BOOTP) server (67) domain Domain name service (DNS, 53) ntp Netw… |
| 1.3.6.1.4.1.3902.3.1100.1.4.1.24 | Columnzxr10IPv4MixedACLSrcPort2 | read-only | current | <0-65535> Port number bootpc Bootstrap protocol (BOOTP) client (68) bootps Bootstrap protocol (BOOTP) server (67) domain Domain name service (DNS, 53) ntp Netw… |
| 1.3.6.1.4.1.3902.3.1100.1.4.1.25 | Columnzxr10IPv4MixedACLDestOpr | read-only | current | eq (Optional)Match only packets on a given port number ge (Optional)Match only packets with a no lower port number le (Optional)Match only packets with a no gr… |
| 1.3.6.1.4.1.3902.3.1100.1.4.1.26 | Columnzxr10IPv4MixedACLDestPort | read-only | current | <0-65535> Port number bootpc Bootstrap protocol (BOOTP) client (68) bootps Bootstrap protocol (BOOTP) server (67) domain Domain name service (DNS, 53) ntp Netw… |
| 1.3.6.1.4.1.3902.3.1100.1.4.1.27 | Columnzxr10IPv4MixedACLDestPort2 | read-only | current | <0-65535> Port number bootpc Bootstrap protocol (BOOTP) client (68) bootps Bootstrap protocol (BOOTP) server (67) domain Domain name service (DNS, 53) ntp Netw… |
| 1.3.6.1.4.1.3902.3.1100.1.4.1.28 | Columnzxr10IPv4MixedACLTCPEstablish | read-only | current | (Optional)Match established connections |
| 1.3.6.1.4.1.3902.3.1100.1.4.1.29 | Columnzxr10IPv4MixedACLICMPType | read-only | current | 0-254|256 ICMP type 255 Any ICMP type alternate-address Alternate address (6) echo Echo (ping, 8) echo-reply Echo reply (0) information-reply Information repli… |
| 1.3.6.1.4.1.3902.3.1100.1.4.1.30 | Columnzxr10IPv4MixedACLICMPCode | read-only | current | 0-254|256 ICMP code 255 Any ICMP code |
| 1.3.6.1.4.1.3902.3.1100.1.4.1.31 | Columnzxr10IPv4MixedACLPrecedence | read-only | current | <0-7> Precedence level |
| 1.3.6.1.4.1.3902.3.1100.1.4.1.32 | Columnzxr10IPv4MixedACLTOS | read-only | current | <0-15> Type of service(ToS) |
| 1.3.6.1.4.1.3902.3.1100.1.4.1.33 | Columnzxr10IPv4MixedACLDSCP | read-only | current | <0-63> DSCP value |
| 1.3.6.1.4.1.3902.3.1100.1.4.1.34 | Columnzxr10IPv4MixedACLStateFlag | read-only | current | Timerange enable or disable flag |
| 1.3.6.1.4.1.3902.3.1100.1.4.1.35 | Columnzxr10IPv4MixedACLTimerangeName | read-only | current | time-range (Optional)Configure time range |
| 1.3.6.1.4.1.3902.3.1100.1.4.1.36 | Columnzxr10IPv4MixedACLRowStatus | read-only | current | createAndGo(4) Configure IPv4 Mixed ACL or rule destroy(6) Delete IPv4 Mixed ACL or rule |
| 1.3.6.1.4.1.3902.3.1100.1.4.1.37 | Columnzxr10IPv4MixedACLIpBitMap | read-only | current | Match on the specify ip flag bit. 1 means setted , and 0 means not. Bit from low to high represents: first : DSCP second : TOS third : Precedence fourth : ICMP… |
| 1.3.6.1.4.1.3902.3.1100.1.4.1.38 | Columnzxr10IPv4MixedACLLinkBitMap | read-only | current | Match on the specify limk flag bit. 1 means setted , and 0 means not. Bit from low to high represents: first : in cos second : out cos third : in vlan fourth :… |
| 1.3.6.1.4.1.3902.3.1100.1.4.1.39 | Columnzxr10IPv4MixedACLInVlanIDEnd | read-only | current | <1-4094> Value of inner vlan |
| 1.3.6.1.4.1.3902.3.1100.1.4.1.40 | Columnzxr10IPv4MixedACLOutVlanIDEnd | read-only | current | <1-4094> Value of outer vlan |
| 1.3.6.1.4.1.3902.3.1100.1.4.1.41 | Columnzxr10IPv4MixedACLFragment | read-only | current | Fragment enable or disable flag |
| 1.3.6.1.4.1.3902.3.1100.1.5 | Tablezxr10IPv6MixedACLTable | not-accessible | current | IPv6 Mixed ACL Table |
| 1.3.6.1.4.1.3902.3.1100.1.5.1 | Rowzxr10IPv6MixedACLEntry | not-accessible | current | IPv6 Mixed ACL |
| 1.3.6.1.4.1.3902.3.1100.1.5.1.1 | Columnzxr10IPv6MixedACLName | read-only | current | IPv6Mixed-access-list WORD Name of an IPv6 Mixed access-list (1-31 characters) |
| 1.3.6.1.4.1.3902.3.1100.1.5.1.2 | Columnzxr10IPv6MixedACLRuleID | read-only | current | rule <1-2147483644> (Optional)ID of this rule |
| 1.3.6.1.4.1.3902.3.1100.1.5.1.3 | Columnzxr10IPv6MixedACLPermitDeny | read-only | current | deny Specify packets to reject permit Specify packets to forward |
| 1.3.6.1.4.1.3902.3.1100.1.5.1.4 | Columnzxr10IPv6MixedACLLinkProtocol | read-only | current | <0-65535> Link protocal |
| 1.3.6.1.4.1.3902.3.1100.1.5.1.5 | Columnzxr10IPv6MixedACLSourceMAC | read-only | current | <xxxx.xxxx.xxxx> Source MAC address |
| 1.3.6.1.4.1.3902.3.1100.1.5.1.6 | Columnzxr10IPv6MixedACLSourceMACWildcard | read-only | current | <xxxx.xxxx.xxxx> Source MAC wildcard |
| 1.3.6.1.4.1.3902.3.1100.1.5.1.7 | Columnzxr10IPv6MixedACLSourceMACAny | read-only | current | any Any source MAC address |
| 1.3.6.1.4.1.3902.3.1100.1.5.1.8 | Columnzxr10IPv6MixedACLDestinationMAC | read-only | current | <xxxx.xxxx.xxxx> Destination MAC address |
| 1.3.6.1.4.1.3902.3.1100.1.5.1.9 | Columnzxr10IPv6MixedACLDestinationMACWildCard | read-only | current | <xxxx.xxxx.xxxx> Destination MAC wildcard |
| 1.3.6.1.4.1.3902.3.1100.1.5.1.10 | Columnzxr10IPv6MixedACLDestinationMACAny | read-only | current | any Any destination MAC address |
| 1.3.6.1.4.1.3902.3.1100.1.5.1.11 | Columnzxr10IPv6MixedACLIncos | read-only | current | <0-7> Value of inner cos |
| 1.3.6.1.4.1.3902.3.1100.1.5.1.12 | Columnzxr10IPv6MixedACLOutCos | read-only | current | <0-7> Value of outer cos |
| 1.3.6.1.4.1.3902.3.1100.1.5.1.13 | Columnzxr10IPv6MixedACLInVlanIDBegin | read-only | current | <1-4094> Value of inner vlan |
| 1.3.6.1.4.1.3902.3.1100.1.5.1.14 | Columnzxr10IPv6MixedACLOutVlanIDBegin | read-only | current | <1-4094> Value of outer vlan |
| 1.3.6.1.4.1.3902.3.1100.1.5.1.15 | Columnzxr10IPv6MixedACLflowlabel | read-only | current | <0-1048575> Flowlabel value |
| 1.3.6.1.4.1.3902.3.1100.1.5.1.16 | Columnzxr10IPv6MixedACLSrcAddr | read-only | current | X:X::X:X Source address |
| 1.3.6.1.4.1.3902.3.1100.1.5.1.17 | Columnzxr10IPv6MixedACLSrcWildcard | read-only | current | <0-128> Source Wildcard |
| 1.3.6.1.4.1.3902.3.1100.1.5.1.18 | Columnzxr10IPv6MixedACLSrcAny | read-only | current | Any source address |
| 1.3.6.1.4.1.3902.3.1100.1.5.1.19 | Columnzxr10IPv6MixedACLDestAddr | read-only | current | X:X::X:X Destination address |
| 1.3.6.1.4.1.3902.3.1100.1.5.1.20 | Columnzxr10IPv6MixedACLDestWildcard | read-only | current | <0-128> Destination Wildcard |
| 1.3.6.1.4.1.3902.3.1100.1.5.1.21 | Columnzxr10IPv6MixedACLDestAny | read-only | current | Any destination address |
| 1.3.6.1.4.1.3902.3.1100.1.5.1.22 | Columnzxr10IPv6MixedACLProtocol | read-only | current | <0-255> An IP protocol number gre Generic Routing Encapsulation (47) icmp Internet Control Message Protocol(58) igmp Internet Group Management Protocol (2) ip … |
| 1.3.6.1.4.1.3902.3.1100.1.5.1.23 | Columnzxr10IPv6MixedACLSrcOpr | read-only | current | eq (Optional)Match only packets on a given port number ge (Optional)Match only packets with a no lower port number le (Optional)Match only packets with a no gr… |
| 1.3.6.1.4.1.3902.3.1100.1.5.1.24 | Columnzxr10IPv6MixedACLSrcPort | read-only | current | <0-65535> Port number bootpc Bootstrap protocol (BOOTP) client (68) bootps Bootstrap protocol (BOOTP) server (67) domain Domain name service (DNS, 53) ntp Netw… |
| 1.3.6.1.4.1.3902.3.1100.1.5.1.25 | Columnzxr10IPv6MixedACLSrcPort2 | read-only | current | <0-65535> Port number bootpc Bootstrap protocol (BOOTP) client (68) bootps Bootstrap protocol (BOOTP) server (67) domain Domain name service (DNS, 53) ntp Netw… |
| 1.3.6.1.4.1.3902.3.1100.1.5.1.26 | Columnzxr10IPv6MixedACLDestOpr | read-only | current | eq (Optional)Match only packets on a given port number ge (Optional)Match only packets with a no lower port number le (Optional)Match only packets with a no gr… |
| 1.3.6.1.4.1.3902.3.1100.1.5.1.27 | Columnzxr10IPv6MixedACLDestPort | read-only | current | <0-65535> Port number bootpc Bootstrap protocol (BOOTP) client (68) bootps Bootstrap protocol (BOOTP) server (67) domain Domain name service (DNS, 53) ntp Netw… |
| 1.3.6.1.4.1.3902.3.1100.1.5.1.28 | Columnzxr10IPv6MixedACLDestPort2 | read-only | current | <0-65535> Port number bootpc Bootstrap protocol (BOOTP) client (68) bootps Bootstrap protocol (BOOTP) server (67) domain Domain name service (DNS, 53) ntp Netw… |
| 1.3.6.1.4.1.3902.3.1100.1.5.1.29 | Columnzxr10IPv6MixedACLTCPEstablish | read-only | current | (Optional)Match established connections |
| 1.3.6.1.4.1.3902.3.1100.1.5.1.30 | Columnzxr10IPv6MixedACLTcpFlagOprBitMap | read-only | current | Match on the specify TCP flag bit. 1 means + , and 0 means -. Bit from low to high represents: first : ack second : fin third : psh fourth : rst fifth : syn si… |
| 1.3.6.1.4.1.3902.3.1100.1.5.1.31 | Columnzxr10IPv6MixedACLTcpFlagVlaBitMap | read-only | current | Match when the TCP flag set or not. 1 means setted , and 0 means not. Bit from low to high represents: first : ack second : fin third : psh fourth : rst fifth … |
| 1.3.6.1.4.1.3902.3.1100.1.5.1.32 | Columnzxr10IPv6MixedACLHeaderOptionBitMap | read-only | current | Matches if the specify IPv6 header is present. 1 means setted , and 0 means not. Bit from low to high represents: first : hop-by-hop second : destopts third : … |
| 1.3.6.1.4.1.3902.3.1100.1.5.1.33 | Columnzxr10IPv6MixedACLICMPType | read-only | current | 0-254|256 ICMP type 255 Any ICMP type destination-unreachable Destination unreachable (1) echo-reply Echo reply (129) echo-request Echo request (ping, 128) mld… |
| 1.3.6.1.4.1.3902.3.1100.1.5.1.34 | Columnzxr10IPv6MixedACLICMPCode | read-only | current | 0-254|256 ICMP code 255 Any ICMP code |
| 1.3.6.1.4.1.3902.3.1100.1.5.1.35 | Columnzxr10IPv6MixedACLDSCP | read-only | current | <0-63> DSCP value |
| 1.3.6.1.4.1.3902.3.1100.1.5.1.36 | Columnzxr10IPv6MixedACLStateFlag | read-only | current | Timerange enable or disable flag |
| 1.3.6.1.4.1.3902.3.1100.1.5.1.37 | Columnzxr10IPv6MixedACLTimerangeName | read-only | current | time-range (Optional)Configure time range |
| 1.3.6.1.4.1.3902.3.1100.1.5.1.38 | Columnzxr10IPv6MixedACLRowStatus | read-only | current | createAndGo(4) Configure IPv6 Mixed ACL or rule destroy(6) Delete IPv6 Mixed ACL or rule |
| 1.3.6.1.4.1.3902.3.1100.1.5.1.39 | Columnzxr10IPv6MixedACLIpBitMap | read-only | current | Match on the specify ip flag bit. 1 means setted , and 0 means not. Bit from low to high represents: first : DSCP second : (reserved, default value 0) third : … |
| 1.3.6.1.4.1.3902.3.1100.1.5.1.40 | Columnzxr10IPv6MixedACLLinkBitMap | read-only | current | Match on the specify limk flag bit. 1 means setted , and 0 means not. Bit from low to high represents: first : in cos second : out cos third : in vlan fourth :… |
| 1.3.6.1.4.1.3902.3.1100.1.5.1.41 | Columnzxr10IPv6MixedACLInVlanIDEnd | read-only | current | <1-4094> Value of inner vlan |
| 1.3.6.1.4.1.3902.3.1100.1.5.1.42 | Columnzxr10IPv6MixedACLOutVlanIDEnd | read-only | current | <1-4094> Value of outer vlan |