ZXR10-CONFIG-COPY-MIB
83 objects
This MIB facilitates writing of configuration files of an SNMP Agent running ZTE's ROS in the following ways: to and from the net, copying running configurations to startup configurations and vice-versa, and copying a configuration (running or startup) to and from the local file system.
Imported Objects
| IPV6-TC | Ipv6Address |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | enterprises Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3902 | Nodezte | |||
| 1.3.6.1.4.1.3902.3 | Nodezxr10 | |||
| 1.3.6.1.4.1.3902.3.202 | Nodezxr10MGMT | |||
| 1.3.6.1.4.1.3902.3.202.1 | Identityzxr10ConfigCopyMIB | This MIB facilitates writing of configuration files of an SNMP Agent running ZTE's ROS in the following ways: to and from the net, copying running configuratio… | ||
| 1.3.6.1.4.1.3902.3.202.1.1 | Nodezxr10ConfigCopyMIBObjects | |||
| 1.3.6.1.4.1.3902.3.202.1.1.1 | Nodezxr10Copy | |||
| 1.3.6.1.4.1.3902.3.202.1.1.1.1 | Tablezxr10CopyTable | not-accessible | current | A table of config-copy requests. |
| 1.3.6.1.4.1.3902.3.202.1.1.1.1.1 | Rowzxr10CopyEntry | not-accessible | current | A config-copy request. A management station wishing to create an entry should first generate a random serial number to be used as the index to this sparse tabl… |
| 1.3.6.1.4.1.3902.3.202.1.1.1.1.1.1 | Columnzxr10CopyIndex | not-accessible | current | Object which specifies a unique entry in the copyTable. A management station wishing to initiate a config-copy operation should use a random value for this obj… |
| 1.3.6.1.4.1.3902.3.202.1.1.1.1.1.2 | Columnzxr10CopyProtocol | read-create | current | The protocol to be used for any copy. Will default to FTP if not specified. If the copy operation occurs locally on the SNMP agent (e.g. runningConfigToStartup… |
| 1.3.6.1.4.1.3902.3.202.1.1.1.1.1.3 | Columnzxr10CopySourceFileType | read-create | current | specifies the type of file to copy from. Either the copySourceFileType or the copyDestFileType (or both) must be of type runningConfig or startupConfig. Also,t… |
| 1.3.6.1.4.1.3902.3.202.1.1.1.1.1.4 | Columnzxr10CopyDestFileType | read-create | current | specifies the type of file to copy to. Either the copySourceFileType or the copyDestFileType (or both) must be of type runningConfig or startupConfig. Also, th… |
| 1.3.6.1.4.1.3902.3.202.1.1.1.1.1.5 | Columnzxr10CopyServerAddress | read-create | current | The IPv4 address of the FTP server from (or to) which to copy the configuration file. This object can not be used with zxr10CopyServerV6Address at the same tim… |
| 1.3.6.1.4.1.3902.3.202.1.1.1.1.1.6 | Columnzxr10CopySrcFileName | read-create | current | The source file name (including the path, if applicable) of the file. This object must be created when either the copySourceFileType or copyDestFileType has th… |
| 1.3.6.1.4.1.3902.3.202.1.1.1.1.1.7 | Columnzxr10CopyDstFileName | read-create | current | The destination file name (including the path, if applicable) of the file. This object must be created when either the copySourceFileType or copyDestFileType h… |
| 1.3.6.1.4.1.3902.3.202.1.1.1.1.1.8 | Columnzxr10CopyUserName | read-create | current | Remote user name for copy via FTP protocol. This object must be created when the copyProtocol is FTP. |
| 1.3.6.1.4.1.3902.3.202.1.1.1.1.1.9 | Columnzxr10CopyUserPassword | read-create | current | Password used by FTP for copying a file to/from the FTP server. This object must be created when the copyProtocol is FTP. |
| 1.3.6.1.4.1.3902.3.202.1.1.1.1.1.10 | Columnzxr10CopyNotificationOnCompletion | read-create | current | Specifies whether or not a copyCompletion notification should be issued on completion of the FTP transfer. If such a notification is desired, it is the respons… |
| 1.3.6.1.4.1.3902.3.202.1.1.1.1.1.11 | Columnzxr10CopyState | read-only | current | Specifies the state of this config-copy request. This value of this object is instantiated only after the row has been instantiated, i.e. after the copyEntryRo… |
| 1.3.6.1.4.1.3902.3.202.1.1.1.1.1.12 | Columnzxr10CopyTimeStarted | read-only | current | Specifies the time the copyState last transitioned to running, or 0 if the state has never transitioned to running (for e.g., stuck in waiting state). This obj… |
| 1.3.6.1.4.1.3902.3.202.1.1.1.1.1.13 | Columnzxr10CopyTimeCompleted | read-only | current | Specifies the time the copyState last transitioned from running to successful or failed states. This object is instantiated only after the row has been instant… |
| 1.3.6.1.4.1.3902.3.202.1.1.1.1.1.14 | Columnzxr10CopyFailCause | read-only | current | The reason why the config-copy operation failed. This object is instantiated only when the copyState for this entry is in the failed state. |
| 1.3.6.1.4.1.3902.3.202.1.1.1.1.1.15 | Columnzxr10CopyRowStatus | read-create | current | The status of this table entry. Once the entry status is set to active, the associated entry cannot be modified until the request completes (copyState transiti… |
| 1.3.6.1.4.1.3902.3.202.1.1.1.1.1.16 | Columnzxr10CopyVrfName | read-create | current | The VRF name for copy. |
| 1.3.6.1.4.1.3902.3.202.1.1.1.1.1.17 | Columnzxr10CopyMng | read-create | current | Specifies whether or not choose the mng port. |
| 1.3.6.1.4.1.3902.3.202.1.1.1.1.1.18 | Columnzxr10CopyFileCheckSumType | read-create | current | Specifies the type of file check.The value 0 means no check, 1 means checking file with MD5,2 means checking file with SHA1. |
| 1.3.6.1.4.1.3902.3.202.1.1.1.1.1.19 | Columnzxr10CopyFileCheckSumString | read-create | current | The key of check. |
| 1.3.6.1.4.1.3902.3.202.1.1.1.1.1.20 | Columnzxr10CopyServerV6Address | read-create | current | The IPv6 address of the FTP server from (or to) which to copy the configuration file. This object can not be used with zxr10CopyServerAddress at the same time. |
| 1.3.6.1.4.1.3902.3.202.1.1.1.1.1.21 | Columnzxr10CopyInterface | read-create | current | The interface name. This object is used only when the remote address is a link-local address. |
| 1.3.6.1.4.1.3902.3.202.1.1.1.1.1.22 | Columnzxr10CopyProgress | read-only | current | The progress of copy operation. |
| 1.3.6.1.4.1.3902.3.202.1.1.1.1.1.23 | Columnzxr10CopyFinishRemainTime | read-only | current | Remaining time of copy completion. |
| 1.3.6.1.4.1.3902.3.202.1.1.1.2 | Tablezxr10TFTPCopyTable | not-accessible | current | A table of tftp copy requests. |
| 1.3.6.1.4.1.3902.3.202.1.1.1.2.1 | Rowzxr10TFTPCopyEntry | not-accessible | current | A tftp copy request. A management station wishing to create an entry should first generate a random serial number to be used as the index to this sparse table.… |
| 1.3.6.1.4.1.3902.3.202.1.1.1.2.1.1 | Columnzxr10TFTPCopyIndex | not-accessible | current | Object which specifies a unique entry in the copyTable. A management station wishing to initiate a tftp copy operation should use a random value for this objec… |
| 1.3.6.1.4.1.3902.3.202.1.1.1.2.1.2 | Columnzxr10TFTPCopySourceFileType | read-create | current | specifies the type of file to copy from. Either the copySourceFileType or the copyDestFileType (or both) must be of type runningConfig or startupConfig. Also, … |
| 1.3.6.1.4.1.3902.3.202.1.1.1.2.1.3 | Columnzxr10TFTPCopyDestFileType | read-create | current | specifies the type of file to copy to. Either the copySourceFileType or the copyDestFileType (or both) must be of type runningConfig or startupConfig. Also, th… |
| 1.3.6.1.4.1.3902.3.202.1.1.1.2.1.4 | Columnzxr10TFTPCopyServerAddress | read-create | current | The IPv4 address of the TFTP server from (or to) which to copy the configuration file. This object can not be used with zxr10TFTPCopyServerV6Address at the sam… |
| 1.3.6.1.4.1.3902.3.202.1.1.1.2.1.5 | Columnzxr10TFTPCopySrcFileName | read-create | current | The source file name (including the path, if applicable) of the file. This object must be created when either the copySourceFileType or copyDestFileType has th… |
| 1.3.6.1.4.1.3902.3.202.1.1.1.2.1.6 | Columnzxr10TFTPCopyDstFileName | read-create | current | The destination file name (including the path, if applicable) of the file. This object must be created when either the copySourceFileType or copyDestFileType h… |
| 1.3.6.1.4.1.3902.3.202.1.1.1.2.1.7 | Columnzxr10TFTPCopyFinishNotify | read-create | current | Specifies whether or not a copyCompletion notification should be issued on completion of the TFTP transfer. If such a notification is desired, it is the respon… |
| 1.3.6.1.4.1.3902.3.202.1.1.1.2.1.8 | Columnzxr10TFTPCopyState | read-only | current | Specifies the state of this tftp copy request. This value of this object is instantiated only after the row has been instantiated, i.e. after the copyEntryRowS… |
| 1.3.6.1.4.1.3902.3.202.1.1.1.2.1.9 | Columnzxr10TFTPCopyTimeStarted | read-only | current | Specifies the time the copyState last transitioned to running, or 0 if the state has never transitioned to running (for e.g., stuck in waiting state). This obj… |
| 1.3.6.1.4.1.3902.3.202.1.1.1.2.1.10 | Columnzxr10TFTPCopyTimeCompleted | read-only | current | Specifies the time the copyState last transitioned from running to successful or failed states. This object is instantiated only after the row has been instant… |
| 1.3.6.1.4.1.3902.3.202.1.1.1.2.1.11 | Columnzxr10TFTPCopyFailCause | read-only | current | The reason why the tftp copy operation failed. This object is instantiated only when the copyState for this entry is in the failed state. |
| 1.3.6.1.4.1.3902.3.202.1.1.1.2.1.12 | Columnzxr10TFTPCopyVrfName | read-create | current | The VRF name for copy. |
| 1.3.6.1.4.1.3902.3.202.1.1.1.2.1.13 | Columnzxr10TFTPCopyMng | read-create | current | Specifies whether or not choose the mng port. |
| 1.3.6.1.4.1.3902.3.202.1.1.1.2.1.14 | Columnzxr10TFTPCopyFileCheckSumType | read-create | current | Specifies the type of file check. You can check file with MD5 or SHA1 algorithm. |
| 1.3.6.1.4.1.3902.3.202.1.1.1.2.1.15 | Columnzxr10TFTPCopyFileCheckSumString | read-create | current | The key of check. |
| 1.3.6.1.4.1.3902.3.202.1.1.1.2.1.16 | Columnzxr10TFTPCopyServerV6Address | read-create | current | The IPv6 address of the TFTP server from (or to) which to copy the configuration file. This object can not be used with zxr10CopyTFTPServerAddress at the same … |
| 1.3.6.1.4.1.3902.3.202.1.1.1.2.1.17 | Columnzxr10TFTPCopyInterface | read-create | current | The interface name. |
| 1.3.6.1.4.1.3902.3.202.1.1.1.2.1.100 | Columnzxr10TFTPCopyRowStatus | read-create | current | The status of this table entry. Once the entry status is set to active, the associated entry cannot be modified until the request completes (copyState transiti… |
| 1.3.6.1.4.1.3902.3.202.1.1.1.3 | Tablezxr10SftpCopyTable | not-accessible | current | A table of SFTP copy requests. |
| 1.3.6.1.4.1.3902.3.202.1.1.1.3.1 | Rowzxr10SftpCopyEntry | not-accessible | current | A SFTP copy request. A management station wishing to create an entry should first generate a random serial number to be used as the index to this sparse table.… |
| 1.3.6.1.4.1.3902.3.202.1.1.1.3.1.1 | Columnzxr10SftpCopyIndex | not-accessible | current | Object which specifies a unique entry in the copyTable. A management station wishing to initiate a sftp copy operation should use a random value for this objec… |
| 1.3.6.1.4.1.3902.3.202.1.1.1.3.1.2 | Columnzxr10SftpCopySourceFileType | read-create | current | specifies the type of file to copy from. Either the copySourceFileType or the copyDestFileType (or both) must be of type runningConfig or startupConfig. Also,t… |
| 1.3.6.1.4.1.3902.3.202.1.1.1.3.1.3 | Columnzxr10SftpCopyDestFileType | read-create | current | specifies the type of file to copy to. Either the copySourceFileType or the copyDestFileType (or both) must be of type runningConfig or startupConfig. Also, th… |
| 1.3.6.1.4.1.3902.3.202.1.1.1.3.1.4 | Columnzxr10SftpCopyServerAddress | read-create | current | The IP address of the SFTP server from (or to) which to copy the configuration file. This object can not be used with zxr10SftpCopyServerV6Address at the same … |
| 1.3.6.1.4.1.3902.3.202.1.1.1.3.1.5 | Columnzxr10SftpCopySrcFileName | read-create | current | The source file name (including the path, if applicable) of the file. This object must be created when either the copySourceFileType or copyDestFileType has th… |
| 1.3.6.1.4.1.3902.3.202.1.1.1.3.1.6 | Columnzxr10SftpCopyDstFileName | read-create | current | The destination file name (including the path, if applicable) of the file. This object must be created when either the copySourceFileType or copyDestFileType h… |
| 1.3.6.1.4.1.3902.3.202.1.1.1.3.1.7 | Columnzxr10SftpCopyUserName | read-create | current | Remote user name for copy via SFTP protocol. This object must be created when the copyProtocol is SFTP. |
| 1.3.6.1.4.1.3902.3.202.1.1.1.3.1.8 | Columnzxr10SftpCopyUserPassword | read-create | current | Password used by SFTP for copying a file to/from the SFTP server. This object must be created when the copyProtocol is SFTP. |
| 1.3.6.1.4.1.3902.3.202.1.1.1.3.1.10 | Columnzxr10SftpCopyState | read-only | current | Specifies the state of this sftp copy request. This value of this object is instantiated only after the row has been instantiated, i.e. after the copyEntryRowS… |
| 1.3.6.1.4.1.3902.3.202.1.1.1.3.1.11 | Columnzxr10SftpCopyTimeStarted | read-only | current | Specifies the time the copyState last transitioned to running, or 0 if the state has never transitioned to running (for e.g., stuck in waiting state). This obj… |
| 1.3.6.1.4.1.3902.3.202.1.1.1.3.1.12 | Columnzxr10SftpCopyTimeCompleted | read-only | current | Specifies the time the copyState last transitioned from running to successful or failed states. This object is instantiated only after the row has been instant… |
| 1.3.6.1.4.1.3902.3.202.1.1.1.3.1.13 | Columnzxr10SftpCopyFailCause | read-only | current | The reason why the config-copy operation failed. This object is instantiated only when the copyState for this entry is in the failed state. |
| 1.3.6.1.4.1.3902.3.202.1.1.1.3.1.14 | Columnzxr10SftpCopyVrfName | read-create | current | The VRF name for sftp copy. |
| 1.3.6.1.4.1.3902.3.202.1.1.1.3.1.15 | Columnzxr10SftpCopyMng | read-create | current | Specifies whether or not choose the mng port. |
| 1.3.6.1.4.1.3902.3.202.1.1.1.3.1.16 | Columnzxr10SftpCopyServerV6Address | read-create | current | The IPv6 address of the SFTP server from (or to) which to copy the configuration file. This object can not be used with zxr10SftpCopyServerAddress at the same … |
| 1.3.6.1.4.1.3902.3.202.1.1.1.3.1.17 | Columnzxr10SftpCopyInterface | read-create | current | The interface name. This object is used only when the remote address is a link-local address. |
| 1.3.6.1.4.1.3902.3.202.1.1.1.3.1.50 | Columnzxr10SftpCopyRowStatus | read-create | current | The status of this table entry. Once the entry status is set to active, the associated entry cannot be modified until the request completes (copyState transiti… |
| 1.3.6.1.4.1.3902.3.202.1.2 | Nodezxr10ConfigCopyMIBTrapPrefix | |||
| 1.3.6.1.4.1.3902.3.202.1.2.1 | Nodezxr10CopyMIBTraps | |||
| 1.3.6.1.4.1.3902.3.202.1.2.1.1 | Notificationzxr10CopyCompletion | current | A copyCompletion trap is sent at the completion of a config-copy request. The copyFailCause is not instantiated, and hence not included in a trap, when the cop… | |
| 1.3.6.1.4.1.3902.3.202.1.2.2 | Nodezxr10TFTPCopyMIBTraps | |||
| 1.3.6.1.4.1.3902.3.202.1.2.2.1 | Notificationzxr10TFTPCopyCompletion | current | A copyCompletion trap is sent at the completion of a tftp copy request. The copyFailCause is not instantiated, and hence not included in a trap, when the copyS… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| ChecksumType | INTEGER { none(1), md5(2), sha1(3) } | current | The various types of file check. |
| ConfigCopyFailCause | INTEGER { unknown(1), localSourceFileUnavailable(2), connectionTimeout(3), insufficientMemory(4), noConfig(5), unsupportedProtocol(6), someConfigApplyFailed(7), localDestFileExist(8), fileChecksumErr(9), ftpLoginFail(10), localDestFileCreateErr(11), serverFileAccessErr(12), serverCancelTrance(13), insufficientStorage(14), vrfInvalid(15), unsupportedChecksumType(16) } | current | The reason a copy request failed. |
| ConfigCopyProtocol | INTEGER { tftp(1), ftp(2) } | current | The protocol file transfer protocol that should be used to copy the configuration file over the network. If the config file transfer is to occur locally on the SNMP agent, the method of transfer is left upto the impleme… |
| ConfigCopyState | INTEGER { waiting(1), running(2), successful(3), failed(4) } | current | The state of a copy operation. The description of each state is given below: waiting: only one copy request can run at any time. A newly activated copy request is placed in this state if another request has already been… |
| ConfigFileType | INTEGER { networkFile(1), localFile(2), startupConfig(3), runningConfig(4), version(5) } | current | The various types of files on which a copy operation can be performed. |
| SFTPConfigFileType | INTEGER { networkFile(1), localFile(2) } | current | The various types of files on which a copy operation can be performed. |
| SFTPCopyFailCause | INTEGER { errUnknown(17), vrfInvalid(18), localFileUnavailable(19), localDestFileExist(20), localFileOperateError(21), localFileOpenError(22), fileSizeExceedLimit(23), resourceAllocFail(24), createSshError(25), setSshError(26), fileIsTransmit(27), resourceNotEnough(28), sftpLoginFail(29), serverFileAccessErr(30), inputParaError(31), transmissionAborted(32), copyNoError(255) } | current | The reason a copy request failed. |
| TFTPCopyFailCause | INTEGER { unknown(1), vrfInvalid(2), serverIPAddressInvalid(3), localFileUnavailable(4), localDestFileExist(5), localSourceFileNotExist(6), localFileOperateError(7), remotFileOperateError(8), resourceNotAvailable(9), netWorkError(10), accessViolation(11), illegalOperation(12), unknownTransferID(13), insufficientStorage(14), someConfigApplyFailed(15), fileChecksumErr(16), unsupportedChecksumType(17), transmissionAborted(18), timeoutOccurred(19), noFailCause(255) } | current | The reason a copy request failed. |