ZXR10-IF-STAT-MIB
248 objects
No module-level DESCRIPTION found.
Imported Objects
| SNMPv2-SMI | Counter32 Counter64 Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION |
| ZXR10-SMI | zxr10RosngMIB |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3902.3.6000.150 | Identityzxr10IfStatMIB | |||
| 1.3.6.1.4.1.3902.3.6000.150.1 | Tablezxr10IfTrafficStatTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.3.6000.150.1.1 | Rowzxr10IfTrafficStatEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.3.6000.150.1.1.1 | Columnzxr10IfTrafficStatIfIndex | read-only | current | Interface index |
| 1.3.6.1.4.1.3902.3.6000.150.1.1.2 | Columnzxr10IfTrafficStatIfName | read-only | current | Interface name |
| 1.3.6.1.4.1.3902.3.6000.150.1.1.3 | Columnzxr10IfTrafficStatInPkts | read-only | current | In packets |
| 1.3.6.1.4.1.3902.3.6000.150.1.1.4 | Columnzxr10IfTrafficStatOutPkts | read-only | current | Out packets |
| 1.3.6.1.4.1.3902.3.6000.150.1.1.5 | Columnzxr10IfTrafficStatInReceivesV4 | read-only | current | ipSystemStatsInReceivesV4 |
| 1.3.6.1.4.1.3902.3.6000.150.1.1.6 | Columnzxr10IfTrafficStatInOctetsV4 | read-only | current | ipSystemStatsInOctetsV4 |
| 1.3.6.1.4.1.3902.3.6000.150.1.1.7 | Columnzxr10IfTrafficStatInHdrErrorsV4 | read-only | current | ipSystemStatsInHdrErrorsV4 |
| 1.3.6.1.4.1.3902.3.6000.150.1.1.8 | Columnzxr10IfTrafficStatInAddrErrorsV4 | read-only | current | ipSystemStatsInAddrErrorsV4 |
| 1.3.6.1.4.1.3902.3.6000.150.1.1.9 | Columnzxr10IfTrafficStatInTruncatedPktsV4 | read-only | current | ipSystemStatsInTruncatedPktsV4 |
| 1.3.6.1.4.1.3902.3.6000.150.1.1.10 | Columnzxr10IfTrafficStatInBcastPktsV4 | read-only | current | ipSystemStatsInBcastPktsV4 |
| 1.3.6.1.4.1.3902.3.6000.150.1.1.11 | Columnzxr10IfTrafficStatInNoRoutesV4 | read-only | current | ipSystemStatsInNoRoutesV4 |
| 1.3.6.1.4.1.3902.3.6000.150.1.1.12 | Columnzxr10IfTrafficStatInUnknownProtosV4 | read-only | current | ipSystemStatsInUnknownProtosV4 |
| 1.3.6.1.4.1.3902.3.6000.150.1.1.13 | Columnzxr10IfTrafficStatInDiscardsV4 | read-only | current | ipSystemStatsInDiscardsV4 |
| 1.3.6.1.4.1.3902.3.6000.150.1.1.14 | Columnzxr10IfTrafficStatInForwDatagramsV4 | read-only | current | ipSystemStatsInForwDatagramsV4 |
| 1.3.6.1.4.1.3902.3.6000.150.1.1.15 | Columnzxr10IfTrafficStatInReceivesV6 | read-only | current | ipSystemStatsInReceivesV6 |
| 1.3.6.1.4.1.3902.3.6000.150.1.1.16 | Columnzxr10IfTrafficStatInOctetsV6 | read-only | current | ipSystemStatsInOctetsV6 |
| 1.3.6.1.4.1.3902.3.6000.150.1.1.17 | Columnzxr10IfTrafficStatInHdrErrorsV6 | read-only | current | ipSystemStatsInHdrErrorsV6 |
| 1.3.6.1.4.1.3902.3.6000.150.1.1.18 | Columnzxr10IfTrafficStatInTruncatedPktsV6 | read-only | current | ipSystemStatsInTruncatedPktsV6 |
| 1.3.6.1.4.1.3902.3.6000.150.1.1.19 | Columnzxr10IfTrafficStatInAddrErrorsV6 | read-only | current | ipSystemStatsInAddrErrorsV6 |
| 1.3.6.1.4.1.3902.3.6000.150.1.1.20 | Columnzxr10IfTrafficStatInBcastPktsV6 | read-only | current | ipSystemStatsInBcastPktsV6 |
| 1.3.6.1.4.1.3902.3.6000.150.1.1.21 | Columnzxr10IfTrafficStatInNoRoutesV6 | read-only | current | ipSystemStatsInNoRoutesV6 |
| 1.3.6.1.4.1.3902.3.6000.150.1.1.22 | Columnzxr10IfTrafficStatInUnknownProtosV6 | read-only | current | ipSystemStatsInUnknownProtosV6 |
| 1.3.6.1.4.1.3902.3.6000.150.1.1.23 | Columnzxr10IfTrafficStatInDiscardsV6 | read-only | current | ipSystemStatsInDiscardsV6 |
| 1.3.6.1.4.1.3902.3.6000.150.1.1.24 | Columnzxr10IfTrafficStatInForwDatagramsV6 | read-only | current | ipSystemStatsInForwDatagramsV6 |
| 1.3.6.1.4.1.3902.3.6000.150.1.1.25 | Columnzxr10IfTrafficStatOutDiscardsV4 | read-only | current | ipSystemStatsOutDiscardsV4 |
| 1.3.6.1.4.1.3902.3.6000.150.1.1.26 | Columnzxr10IfTrafficStatOutForwDatagramsV4 | read-only | current | ipSystemStatsOutForwDatagramsV4 |
| 1.3.6.1.4.1.3902.3.6000.150.1.1.27 | Columnzxr10IfTrafficStatOutFragReqdsV4 | read-only | current | ipSystemStatsOutFragReqdsV4 |
| 1.3.6.1.4.1.3902.3.6000.150.1.1.28 | Columnzxr10IfTrafficStatOutDiscardsV6 | read-only | current | ipSystemStatsOutDiscardsV6 |
| 1.3.6.1.4.1.3902.3.6000.150.1.1.29 | Columnzxr10IfTrafficStatOutForwDatagramsV6 | read-only | current | ipSystemStatsOutForwDatagramsV6 |
| 1.3.6.1.4.1.3902.3.6000.150.1.1.30 | Columnzxr10IfTrafficStatOutFragReqdsV6 | read-only | current | ipSystemStatsOutFragReqdsV6 |
| 1.3.6.1.4.1.3902.3.6000.150.1.1.31 | Columnzxr10IfTrafficStatInUpsendCarDrop | read-only | current | ipSystemStatsInUpsendCarDrop |
| 1.3.6.1.4.1.3902.3.6000.150.1.1.32 | Columnzxr10IfTrafficStatOutV4 | read-only | current | ipSystemStatsOutV4 |
| 1.3.6.1.4.1.3902.3.6000.150.1.1.33 | Columnzxr10IfTrafficStatOutOctetsV4 | read-only | current | ipSystemStatsOutOctetsV4 |
| 1.3.6.1.4.1.3902.3.6000.150.1.1.34 | Columnzxr10IfTrafficStatOutV6 | read-only | current | ipSystemStatOutV6 |
| 1.3.6.1.4.1.3902.3.6000.150.1.1.35 | Columnzxr10IfTrafficStatOutOctetsV6 | read-only | current | ipSystemStatOutOctetsV6 |
| 1.3.6.1.4.1.3902.3.6000.150.1.1.36 | Columnzxr10IfTrafficStatOutUpCarDrop | read-only | current | ipSystemStatsOutUpCarDrop |
| 1.3.6.1.4.1.3902.3.6000.150.1.1.37 | Columnzxr10IfTrafficStatInV4UrpfDrpPkts | read-only | current | ipSystemStatsInV4UrpfDrpPkts |
| 1.3.6.1.4.1.3902.3.6000.150.1.1.38 | Columnzxr10IfTrafficStatInV6UrpfDrpPkts | read-only | current | ipSystemStatsInV6UrpfDrpPkts |
| 1.3.6.1.4.1.3902.3.6000.150.2 | Tablezxr10TeIfTrafficStatTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.3.6000.150.2.1 | Rowzxr10TeIfTrafficStatEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.3.6000.150.2.1.1 | Columnzxr10TeIfTrafficStatTeTunnelID | not-accessible | current | Te tunnel ID |
| 1.3.6.1.4.1.3902.3.6000.150.2.1.2 | Columnzxr10TeIfTrafficStatIfIndex | read-only | current | Te tunnel interface index |
| 1.3.6.1.4.1.3902.3.6000.150.2.1.3 | Columnzxr10TeIfTrafficStatIfName | read-only | current | Te tunnel interface name |
| 1.3.6.1.4.1.3902.3.6000.150.2.1.4 | Columnzxr10TeIfTrafficStatOutBytes | read-only | current | Te tunnel interface out bytes |
| 1.3.6.1.4.1.3902.3.6000.150.2.1.5 | Columnzxr10TeIfTrafficStatOutPkts | read-only | current | Te tunnel interface out packets |
| 1.3.6.1.4.1.3902.3.6000.150.2.1.6 | Columnzxr10TeIfTrafficStatOutBandwidth | read-only | current | Te tunnel interface out bandwidth |
| 1.3.6.1.4.1.3902.3.6000.150.2.1.7 | Columnzxr10TeIfTrafficStatOutPri0Bytes | read-only | current | Te tunnel interface priority 0 out bytes |
| 1.3.6.1.4.1.3902.3.6000.150.2.1.8 | Columnzxr10TeIfTrafficStatOutPri0Pkts | read-only | current | Te tunnel interface priority 0 out packets |
| 1.3.6.1.4.1.3902.3.6000.150.2.1.9 | Columnzxr10TeIfTrafficStatOutPri0Bandwidth | read-only | current | Te tunnel interface priority 0 out bandwidth |
| 1.3.6.1.4.1.3902.3.6000.150.2.1.10 | Columnzxr10TeIfTrafficStatOutPri1Bytes | read-only | current | Te tunnel interface priority 1 out bytes |
| 1.3.6.1.4.1.3902.3.6000.150.2.1.11 | Columnzxr10TeIfTrafficStatOutPri1Pkts | read-only | current | Te tunnel interface priority 1 out packets |
| 1.3.6.1.4.1.3902.3.6000.150.2.1.12 | Columnzxr10TeIfTrafficStatOutPri1Bandwidth | read-only | current | Te tunnel interface priority 1 out bandwidth |
| 1.3.6.1.4.1.3902.3.6000.150.2.1.13 | Columnzxr10TeIfTrafficStatOutPri2Bytes | read-only | current | Te tunnel interface priority 2 out bytes |
| 1.3.6.1.4.1.3902.3.6000.150.2.1.14 | Columnzxr10TeIfTrafficStatOutPri2Pkts | read-only | current | Te tunnel interface priority 2 out packets |
| 1.3.6.1.4.1.3902.3.6000.150.2.1.15 | Columnzxr10TeIfTrafficStatOutPri2Bandwidth | read-only | current | Te tunnel interface priority 2 out bandwidth |
| 1.3.6.1.4.1.3902.3.6000.150.2.1.16 | Columnzxr10TeIfTrafficStatOutPri3Bytes | read-only | current | Te tunnel interface priority 3 out bytes |
| 1.3.6.1.4.1.3902.3.6000.150.2.1.17 | Columnzxr10TeIfTrafficStatOutPri3Pkts | read-only | current | Te tunnel interface priority 3 out packets |
| 1.3.6.1.4.1.3902.3.6000.150.2.1.18 | Columnzxr10TeIfTrafficStatOutPri3Bandwidth | read-only | current | Te tunnel interface priority 3 out bandwidth |
| 1.3.6.1.4.1.3902.3.6000.150.2.1.19 | Columnzxr10TeIfTrafficStatOutPri4Bytes | read-only | current | Te tunnel interface priority 4 out bytes |
| 1.3.6.1.4.1.3902.3.6000.150.2.1.20 | Columnzxr10TeIfTrafficStatOutPri4Pkts | read-only | current | Te tunnel interface priority 4 out packets |
| 1.3.6.1.4.1.3902.3.6000.150.2.1.21 | Columnzxr10TeIfTrafficStatOutPri4Bandwidth | read-only | current | Te tunnel interface priority 4 out bandwidth |
| 1.3.6.1.4.1.3902.3.6000.150.2.1.22 | Columnzxr10TeIfTrafficStatOutPri5Bytes | read-only | current | Te tunnel interface priority 5 out bytes |
| 1.3.6.1.4.1.3902.3.6000.150.2.1.23 | Columnzxr10TeIfTrafficStatOutPri5Pkts | read-only | current | Te tunnel interface priority 5 out packets |
| 1.3.6.1.4.1.3902.3.6000.150.2.1.24 | Columnzxr10TeIfTrafficStatOutPri5Bandwidth | read-only | current | Te tunnel interface priority 5 out bandwidth |
| 1.3.6.1.4.1.3902.3.6000.150.2.1.25 | Columnzxr10TeIfTrafficStatOutPri6Bytes | read-only | current | Te tunnel interface priority 6 out bytes |
| 1.3.6.1.4.1.3902.3.6000.150.2.1.26 | Columnzxr10TeIfTrafficStatOutPri6Pkts | read-only | current | Te tunnel interface priority 6 out packets |
| 1.3.6.1.4.1.3902.3.6000.150.2.1.27 | Columnzxr10TeIfTrafficStatOutPri6Bandwidth | read-only | current | Te tunnel interface priority 6 out bandwidth |
| 1.3.6.1.4.1.3902.3.6000.150.2.1.28 | Columnzxr10TeIfTrafficStatOutPri7Bytes | read-only | current | Te tunnel interface priority 7 out bytes |
| 1.3.6.1.4.1.3902.3.6000.150.2.1.29 | Columnzxr10TeIfTrafficStatOutPri7Pkts | read-only | current | Te tunnel interface priority 7 out packets |
| 1.3.6.1.4.1.3902.3.6000.150.2.1.30 | Columnzxr10TeIfTrafficStatOutPri7Bandwidth | read-only | current | Te tunnel interface priority 7 out bandwidth |
| 1.3.6.1.4.1.3902.3.6000.150.2.1.31 | Columnzxr10TeIfTrafficStatInBytes | read-only | current | Te tunnel interface in bytes |
| 1.3.6.1.4.1.3902.3.6000.150.2.1.32 | Columnzxr10TeIfTrafficStatInPkts | read-only | current | Te tunnel interface in packets |
| 1.3.6.1.4.1.3902.3.6000.150.2.1.33 | Columnzxr10TeIfTrafficStatInDiscBytes | read-only | current | Te tunnel interface in discard bytes |
| 1.3.6.1.4.1.3902.3.6000.150.2.1.34 | Columnzxr10TeIfTrafficStatInDiscPkts | read-only | current | Te tunnel interface in discard packets |
| 1.3.6.1.4.1.3902.3.6000.150.2.1.35 | Columnzxr10TeIfTrafficStatOutDiscBytes | read-only | current | Te tunnel interface out discard bytes |
| 1.3.6.1.4.1.3902.3.6000.150.2.1.36 | Columnzxr10TeIfTrafficStatOutDiscPkts | read-only | current | Te tunnel interface out discard packets |
| 1.3.6.1.4.1.3902.3.6000.150.2.1.37 | Columnzxr10TeIfTrafficStatInPNBytes | read-only | current | Te tunnel interface reverse receiving bytes of Node-P |
| 1.3.6.1.4.1.3902.3.6000.150.2.1.38 | Columnzxr10TeIfTrafficStatInPNPkts | read-only | current | Te tunnel interface reverse receiving packets of Node-P |
| 1.3.6.1.4.1.3902.3.6000.150.2.1.39 | Columnzxr10TeIfTrafficStatOutPNBytes | read-only | current | Te tunnel interface reverse sending bytes of Node-P |
| 1.3.6.1.4.1.3902.3.6000.150.2.1.40 | Columnzxr10TeIfTrafficStatOutPNPkts | read-only | current | Te tunnel interface reverse sending packets of Node-P |
| 1.3.6.1.4.1.3902.3.6000.150.3 | Nodezxr10IfPerfGlobalSwitchObject | |||
| 1.3.6.1.4.1.3902.3.6000.150.3.1 | Scalarzxr10IfPerfGlobalEnableFlag | read-write | current | Interface performance global switch,1(enable),0(disable),default is 1. |
| 1.3.6.1.4.1.3902.3.6000.150.3.2 | Scalarzxr10IfPerf1MinPeakClearIfName | read-write | current | Interface name for clear one minute peak. |
| 1.3.6.1.4.1.3902.3.6000.150.3.3 | Scalarzxr10IfPerf1MinPeakClearAllIntf | read-write | current | Clear all interface one minute peak,255 is valid,0 is invalid. Value of read is 0. |
| 1.3.6.1.4.1.3902.3.6000.150.3.4 | Scalarzxr10IfPerfValueClearIfName | read-write | current | Interface name for clear performance value.Value of read is string which length is 0. |
| 1.3.6.1.4.1.3902.3.6000.150.3.5 | Scalarzxr10IfPerfValueClearAllIntf | read-write | current | Clear all interface performance value,255 is valid,0 is invalid. Value of read is 0. |
| 1.3.6.1.4.1.3902.3.6000.150.3.6 | Scalarzxr10IfPerfGlobalRateStatPeriod | read-write | current | The interface rate count period.Rate period which is a multiple of 10 (sec). |
| 1.3.6.1.4.1.3902.3.6000.150.4 | Tablezxr10IfPerfSwitchTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.3.6000.150.4.1 | Rowzxr10IfPerfSwitchEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.3.6000.150.4.1.1 | Columnzxr10IfPerfSwitchIfName | not-accessible | current | Interface name. |
| 1.3.6.1.4.1.3902.3.6000.150.4.1.2 | Columnzxr10IfPerfSwitchEnable | read-create | current | Interface performance switch,1(enable).This config can be deleted by row status destroy(6). |
| 1.3.6.1.4.1.3902.3.6000.150.4.1.100 | Columnzxr10IfPerfSwitchRowStatus | read-create | current | Row status.active(1),notInService(2),notReady(3),createAndGo(4), createAndWait(5),destroy(6). |
| 1.3.6.1.4.1.3902.3.6000.150.5 | Tablezxr10IfPerfSpecialIfSwitchTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.3.6000.150.5.1 | Rowzxr10IfPerfSpecialIfSwitchEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.3.6000.150.5.1.1 | Columnzxr10IfPerfSpecialIfSwitchIfName | not-accessible | current | Interface name. |
| 1.3.6.1.4.1.3902.3.6000.150.5.1.2 | Columnzxr10IfPerfSpecialIfSwitchEnable | read-create | current | Interface performance switch,1(enable).This config can be deleted by row status destroy(6). |
| 1.3.6.1.4.1.3902.3.6000.150.5.1.100 | Columnzxr10IfPerfSpecialIfSwitchRowStatus | read-create | current | Row status.active(1),notInService(2),notReady(3),createAndGo(4), createAndWait(5),destroy(6). |
| 1.3.6.1.4.1.3902.3.6000.150.6 | Tablezxr10IfPerf1MinPeakTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.3.6000.150.6.1 | Rowzxr10IfPerf1MinPeakEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.3.6000.150.6.1.1 | Columnzxr10IfPerf1MinPeakIfName | not-accessible | current | Interface name.This must be blank when zxr10IfPerf1MinPeakAllIntf is valid. |
| 1.3.6.1.4.1.3902.3.6000.150.6.1.2 | Columnzxr10IfPerf1MinPeakAllIntf | not-accessible | current | Clear all interface one minute peak,valid for all interface when this item is 255 and zxr10IfPerf1MinPeakIfName is blank. If zxr10IfPerf1MinPeakAllIntf is 0,on… |
| 1.3.6.1.4.1.3902.3.6000.150.6.1.3 | Columnzxr10IfPerf1MinPeakEnable | read-create | current | One minute peak switch.This config can be deleted by row status destroy(6). |
| 1.3.6.1.4.1.3902.3.6000.150.6.1.100 | Columnzxr10IfPerf1MinPeakRowStatus | read-create | current | Row status.active(1),notInService(2),notReady(3),createAndGo(4), createAndWait(5),destroy(6). |
| 1.3.6.1.4.1.3902.3.6000.150.7 | Tablezxr10IfPerfLimitTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.3.6000.150.7.1 | Rowzxr10IfPerfLimitEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.3.6000.150.7.1.1 | Columnzxr10IfPerfLimitIfName | not-accessible | current | Interface name.This can set performance limit for physical interface or son interface. |
| 1.3.6.1.4.1.3902.3.6000.150.7.1.2 | Columnzxr10IfPerfLimitType | not-accessible | current | Performance limit type.Value range of physical interface is from 1 to 4.1 is InputRatio limit,2 is OutputRatio limit,3 is FcserrCount limit,4 is FcserrRatio.Va… |
| 1.3.6.1.4.1.3902.3.6000.150.7.1.3 | Columnzxr10IfPerfLimitRatioLow | read-create | current | Performance ratio low limit.Value range is from 0 to 99,default is 0.It can not be set when zxr10IfPerfLimitType is 3. |
| 1.3.6.1.4.1.3902.3.6000.150.7.1.4 | Columnzxr10IfPerfLimitRatioHigh | read-create | current | Performance ratio high limit.Value range is from 1 to 100,default is 100.It can not be set when zxr10IfPerfLimitType is 3. |
| 1.3.6.1.4.1.3902.3.6000.150.7.1.5 | Columnzxr10IfPerfLimitCountLow | read-create | current | Performance count low limit.Value range is from 0 to 4294967294. It can not be set when zxr10IfPerfLimitType is 1 or 2 or 4. |
| 1.3.6.1.4.1.3902.3.6000.150.7.1.6 | Columnzxr10IfPerfLimitCountHigh | read-create | current | Performance count high limit.Value range is from 1 to 4294967295. It can not be set when zxr10IfPerfLimitType is 1 or 2 or 4. |
| 1.3.6.1.4.1.3902.3.6000.150.7.1.100 | Columnzxr10IfPerfLimitRowStatus | read-create | current | Row status.active(1),notInService(2),notReady(3),createAndGo(4), createAndWait(5),destroy(6). |
| 1.3.6.1.4.1.3902.3.6000.150.8 | Tablezxr10IfPerfSubIfLimitTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.3.6000.150.8.1 | Rowzxr10IfPerfSubIfLimitEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.3.6000.150.8.1.1 | Columnzxr10IfPerfSubIfLimitIfName | not-accessible | current | Physical interface name. |
| 1.3.6.1.4.1.3902.3.6000.150.8.1.2 | Columnzxr10IfPerfSubIfLimitType | not-accessible | current | Performance limit type.Value range is from 1 to 2.1 is InputRatio limit,2 is OutputRatio limit. |
| 1.3.6.1.4.1.3902.3.6000.150.8.1.3 | Columnzxr10IfPerfSubIfLimitRatioLow | read-create | current | Performance ratio low limit.Value range is from 0 to 99,default is 0. |
| 1.3.6.1.4.1.3902.3.6000.150.8.1.4 | Columnzxr10IfPerfSubIfLimitRatioHigh | read-create | current | Performance ratio high limit.Value range is from 1 to 100,default is 100. |
| 1.3.6.1.4.1.3902.3.6000.150.8.1.100 | Columnzxr10IfPerfSubIfLimitRowStatus | read-create | current | Row status.active(1),notInService(2),notReady(3),createAndGo(4), createAndWait(5),destroy(6). |
| 1.3.6.1.4.1.3902.3.6000.150.9 | Tablezxr10IfIPv6StatsTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.3.6000.150.9.1 | Rowzxr10IfIPv6StatsEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.3.6000.150.9.1.1 | Columnzxr10IfIPv6StatsIfName | not-accessible | current | Interface name. |
| 1.3.6.1.4.1.3902.3.6000.150.9.1.2 | Columnzxr10IfIPv6StatsInBytesSpeed | read-only | current | IPv6 traffic receiving bytes rate. |
| 1.3.6.1.4.1.3902.3.6000.150.9.1.3 | Columnzxr10IfIPv6StatsOutBytesSpeed | read-only | current | IPv6 traffic sending bytes rate. |
| 1.3.6.1.4.1.3902.3.6000.150.9.1.4 | Columnzxr10IfIPv6StatsInPktsSpeed | read-only | current | IPv6 traffic receiving package rate. |
| 1.3.6.1.4.1.3902.3.6000.150.9.1.5 | Columnzxr10IfIPv6StatsOutPktsSpeed | read-only | current | IPv6 traffic sending package rate. |
| 1.3.6.1.4.1.3902.3.6000.150.9.1.6 | Columnzxr10IfIPv6StatsInDiscPktsRatio | read-only | current | IPv6 traffic receiving discarded package ratio. |
| 1.3.6.1.4.1.3902.3.6000.150.9.1.7 | Columnzxr10IfIPv6StatsOutDiscPktsRatio | read-only | current | IPv6 traffic sending discarded package ratio. |
| 1.3.6.1.4.1.3902.3.6000.150.9.1.8 | Columnzxr10IfIPv6StatsInUtilization | read-only | current | IPv6 traffic receiving bandwidth utilization. |
| 1.3.6.1.4.1.3902.3.6000.150.9.1.9 | Columnzxr10IfIPv6StatsOutUtilization | read-only | current | IPv6 traffic sending bandwidth utilization. |
| 1.3.6.1.4.1.3902.3.6000.150.9.1.10 | Columnzxr10IfIPv6StatsSystemUpTime | read-only | current | IPv6 traffic system up time. |
| 1.3.6.1.4.1.3902.3.6000.150.10 | Tablezxr10IfHwCountersTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.3.6000.150.10.1 | Rowzxr10IfHwCountersEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.3.6000.150.10.1.1 | Columnzxr10IfHwCountersIfName | not-accessible | current | Interface name. |
| 1.3.6.1.4.1.3902.3.6000.150.10.1.2 | Columnzxr10IfHwCountersInCrcRatio | read-only | current | Receiving CRC errors ratio of hardware counters. |
| 1.3.6.1.4.1.3902.3.6000.150.10.1.3 | Columnzxr10IfHwCountersOutCrcRatio | read-only | current | Sending CRC errors ratio of hardware counters. |
| 1.3.6.1.4.1.3902.3.6000.150.11 | Tablezxr10WlanBssCountersTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.3.6000.150.11.1 | Rowzxr10WlanBssCountersEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.3.6000.150.11.1.1 | Columnzxr10WlanBssCountersIfName | not-accessible | current | Interface name. |
| 1.3.6.1.4.1.3902.3.6000.150.11.1.2 | Columnzxr10WlanBssCountersInBytes | read-only | current | Wlan Bss interface in bytes. |
| 1.3.6.1.4.1.3902.3.6000.150.11.1.3 | Columnzxr10WlanBssCountersInPkts | read-only | current | Wlan Bss interface in packets. |
| 1.3.6.1.4.1.3902.3.6000.150.11.1.4 | Columnzxr10WlanBssCountersInErrs | read-only | current | Wlan Bss interface in Errors. |
| 1.3.6.1.4.1.3902.3.6000.150.11.1.5 | Columnzxr10WlanBssCountersInDrop | read-only | current | Wlan Bss interface in drop counters. |
| 1.3.6.1.4.1.3902.3.6000.150.11.1.6 | Columnzxr10WlanBssCountersInOverFlow | read-only | current | Wlan Bss interface in fifo overflow counters. |
| 1.3.6.1.4.1.3902.3.6000.150.11.1.7 | Columnzxr10WlanBssCountersOutBytes | read-only | current | Wlan Bss interface in drop counters. |
| 1.3.6.1.4.1.3902.3.6000.150.11.1.8 | Columnzxr10WlanBssCountersOutPkts | read-only | current | Wlan Bss interface out packets. |
| 1.3.6.1.4.1.3902.3.6000.150.11.1.9 | Columnzxr10WlanBssCountersOutErrs | read-only | current | Wlan Bss interface out errors. |
| 1.3.6.1.4.1.3902.3.6000.150.11.1.10 | Columnzxr10WlanBssCountersOutDrop | read-only | current | Wlan Bss interface out drop counters. |
| 1.3.6.1.4.1.3902.3.6000.150.12 | Tablezxr10GreTunnelStatTable | not-accessible | current | A list of GRE tunnel statistices entries. |
| 1.3.6.1.4.1.3902.3.6000.150.12.1 | Rowzxr10GreTunnelStatEntry | not-accessible | current | An entry containing statistices information of a GRE tunnel. |
| 1.3.6.1.4.1.3902.3.6000.150.12.1.1 | Columnzxr10GreTunnelStatIfName | not-accessible | current | GRE tunnel name. |
| 1.3.6.1.4.1.3902.3.6000.150.12.1.2 | Columnzxr10GreTunnelStatInBytes | read-only | current | GRE tunnel in bytes. |
| 1.3.6.1.4.1.3902.3.6000.150.12.1.3 | Columnzxr10GreTunnelStatInPkts | read-only | current | GRE tunnel in packets. |
| 1.3.6.1.4.1.3902.3.6000.150.12.1.4 | Columnzxr10GreTunnelStatOutBytes | read-only | current | GRE tunnel out bytes. |
| 1.3.6.1.4.1.3902.3.6000.150.12.1.5 | Columnzxr10GreTunnelStatOutPkts | read-only | current | GRE tunnel out packets. |
| 1.3.6.1.4.1.3902.3.6000.150.12.1.6 | Columnzxr10GreTunnelStatInDropBytes | read-only | current | GRE tunnel in drop bytes. |
| 1.3.6.1.4.1.3902.3.6000.150.12.1.7 | Columnzxr10GreTunnelStatInDropPkts | read-only | current | GRE tunnel in drop packets. |
| 1.3.6.1.4.1.3902.3.6000.150.12.1.8 | Columnzxr10GreTunnelStatOutDropBytes | read-only | current | GRE tunnel out drop bytes. |
| 1.3.6.1.4.1.3902.3.6000.150.12.1.9 | Columnzxr10GreTunnelStatOutDropPkts | read-only | current | GRE tunnel out drop packets. |
| 1.3.6.1.4.1.3902.3.6000.150.13 | Tablezxr10PhyIfStatTable | not-accessible | current | PhySical Interface statistics Table |
| 1.3.6.1.4.1.3902.3.6000.150.13.1 | Rowzxr10PhyIfStatEntry | not-accessible | current | PhySical Interface statistics Table Entry |
| 1.3.6.1.4.1.3902.3.6000.150.13.1.1 | Columnzxr10PhyIfName | not-accessible | current | Interface name |
| 1.3.6.1.4.1.3902.3.6000.150.13.1.2 | Columnzxr10PhyIfInOctets | read-only | current | The total number of octets received on the interface, including framing characters. |
| 1.3.6.1.4.1.3902.3.6000.150.13.1.3 | Columnzxr10PhyIfInUcastPkts | read-only | current | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer. |
| 1.3.6.1.4.1.3902.3.6000.150.13.1.5 | Columnzxr10PhyIfInDiscards | read-only | current | The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer pr… |
| 1.3.6.1.4.1.3902.3.6000.150.13.1.6 | Columnzxr10PhyIfInErrors | read-only | current | For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For char… |
| 1.3.6.1.4.1.3902.3.6000.150.13.1.7 | Columnzxr10PhyIfInUnknownProtos | read-only | current | For packet-oriented interfaces, the number of packets received via the interface which were discarded because of an unknown or unsupported protocol. For charac… |
| 1.3.6.1.4.1.3902.3.6000.150.13.1.8 | Columnzxr10PhyIfOutOctets | read-only | current | The total number of octets transmitted out of the interface, including framing characters. |
| 1.3.6.1.4.1.3902.3.6000.150.13.1.9 | Columnzxr10PhyIfOutUcastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-… |
| 1.3.6.1.4.1.3902.3.6000.150.13.1.11 | Columnzxr10PhyIfOutDiscards | read-only | current | The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reaso… |
| 1.3.6.1.4.1.3902.3.6000.150.13.1.12 | Columnzxr10PhyIfOutErrors | read-only | current | For packet-oriented interfaces, the number of outbound packets that could not be transmitted because of errors. For character-oriented or fixed-length interfac… |
| 1.3.6.1.4.1.3902.3.6000.150.14 | Tablezxr10IPLogicIfStatTable | not-accessible | current | IPv4/v6 Interface statistics Table |
| 1.3.6.1.4.1.3902.3.6000.150.14.1 | Rowzxr10IPLogicIfStatEntry | not-accessible | current | IPv4/v6 Interface statistics Table Entry |
| 1.3.6.1.4.1.3902.3.6000.150.14.1.1 | Columnzxr10IPLogicIfName | not-accessible | current | Interface name |
| 1.3.6.1.4.1.3902.3.6000.150.14.1.2 | Columnzxr10IPLogicIfInOctets | read-only | current | The total number of octets received on the interface, including framing characters. |
| 1.3.6.1.4.1.3902.3.6000.150.14.1.3 | Columnzxr10IPLogicIfInUcastPkts | read-only | current | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer. |
| 1.3.6.1.4.1.3902.3.6000.150.14.1.5 | Columnzxr10IPLogicIfInDiscards | read-only | current | The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer pr… |
| 1.3.6.1.4.1.3902.3.6000.150.14.1.6 | Columnzxr10IPLogicIfInErrors | read-only | current | For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For char… |
| 1.3.6.1.4.1.3902.3.6000.150.14.1.7 | Columnzxr10IPLogicIfInUnknownProtos | read-only | current | For packet-oriented interfaces, the number of packets received via the interface which were discarded because of an unknown or unsupported protocol. For charac… |
| 1.3.6.1.4.1.3902.3.6000.150.14.1.8 | Columnzxr10IPLogicIfOutOctets | read-only | current | The total number of octets transmitted out of the interface, including framing characters. |
| 1.3.6.1.4.1.3902.3.6000.150.14.1.9 | Columnzxr10IPLogicIfOutUcastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-… |
| 1.3.6.1.4.1.3902.3.6000.150.14.1.11 | Columnzxr10IPLogicIfOutDiscards | read-only | current | The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reaso… |
| 1.3.6.1.4.1.3902.3.6000.150.14.1.12 | Columnzxr10IPLogicIfOutErrors | read-only | current | For packet-oriented interfaces, the number of outbound packets that could not be transmitted because of errors. For character-oriented or fixed-length interfac… |
| 1.3.6.1.4.1.3902.3.6000.150.15 | Tablezxr10NoIPLogicIfStatTable | not-accessible | current | No IPv4/v6 Interface statistics Table |
| 1.3.6.1.4.1.3902.3.6000.150.15.1 | Rowzxr10NoIPLogicIfStatEntry | not-accessible | current | No IPv4/v6 Interface statistics Table Entry |
| 1.3.6.1.4.1.3902.3.6000.150.15.1.1 | Columnzxr10NoIPLogicIfName | not-accessible | current | Interface name |
| 1.3.6.1.4.1.3902.3.6000.150.15.1.2 | Columnzxr10NoIPLogicIfInOctets | read-only | current | The total number of octets received on the interface, including framing characters. |
| 1.3.6.1.4.1.3902.3.6000.150.15.1.3 | Columnzxr10NoIPLogicIfInUcastPkts | read-only | current | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer. |
| 1.3.6.1.4.1.3902.3.6000.150.15.1.5 | Columnzxr10NoIPLogicIfInDiscards | read-only | current | The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer pr… |
| 1.3.6.1.4.1.3902.3.6000.150.15.1.6 | Columnzxr10NoIPLogicIfInErrors | read-only | current | For packet-oriented interfaces, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For char… |
| 1.3.6.1.4.1.3902.3.6000.150.15.1.7 | Columnzxr10NoIPLogicIfInUnknownProtos | read-only | current | For packet-oriented interfaces, the number of packets received via the interface which were discarded because of an unknown or unsupported protocol. For charac… |
| 1.3.6.1.4.1.3902.3.6000.150.15.1.8 | Columnzxr10NoIPLogicIfOutOctets | read-only | current | The total number of octets transmitted out of the interface, including framing characters. |
| 1.3.6.1.4.1.3902.3.6000.150.15.1.9 | Columnzxr10NoIPLogicIfOutUcastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-… |
| 1.3.6.1.4.1.3902.3.6000.150.15.1.11 | Columnzxr10NoIPLogicIfOutDiscards | read-only | current | The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reaso… |
| 1.3.6.1.4.1.3902.3.6000.150.15.1.12 | Columnzxr10NoIPLogicIfOutErrors | read-only | current | For packet-oriented interfaces, the number of outbound packets that could not be transmitted because of errors. For character-oriented or fixed-length interfac… |
| 1.3.6.1.4.1.3902.3.6000.150.16 | Tablezxr10IfRatioGatherTable | not-accessible | current | Interface RatioGather Table |
| 1.3.6.1.4.1.3902.3.6000.150.16.1 | Rowzxr10IfRatioGatherEntry | not-accessible | current | Interface RatioGather Table Entry |
| 1.3.6.1.4.1.3902.3.6000.150.16.1.1 | Columnzxr10IfRatioGatherIfName | not-accessible | current | Interface name |
| 1.3.6.1.4.1.3902.3.6000.150.16.1.2 | Columnzxr10IfRatioGatherInErrPkts | read-only | current | Interface Received Ratio of Error Packets |
| 1.3.6.1.4.1.3902.3.6000.150.16.1.3 | Columnzxr10IfRatioGatherOutErrPkts | read-only | current | Interface Sent Ratio of Error Packets |
| 1.3.6.1.4.1.3902.3.6000.150.16.1.4 | Columnzxr10IfRatioGatherInDrpPkts | read-only | current | Interface Received Ratio of Discards Packets |
| 1.3.6.1.4.1.3902.3.6000.150.16.1.5 | Columnzxr10IfRatioGatherOutDrpPkts | read-only | current | Interface Sent Ratio of Discards Packets |
| 1.3.6.1.4.1.3902.3.6000.150.16.1.6 | Columnzxr10IfRatioGatherInUtilization | read-only | current | Interface Utilization of Received Packets |
| 1.3.6.1.4.1.3902.3.6000.150.16.1.7 | Columnzxr10IfRatioGatherOutUtilization | read-only | current | Interface Utilization of Sent Packets |
| 1.3.6.1.4.1.3902.3.6000.150.17 | Tablezxr10IfSpeedGatherTable | not-accessible | current | Interface SpeedGather Table |
| 1.3.6.1.4.1.3902.3.6000.150.17.1 | Rowzxr10IfSpeedGatherEntry | not-accessible | current | Interface SpeedGather Table Entry |
| 1.3.6.1.4.1.3902.3.6000.150.17.1.1 | Columnzxr10IfSpeedGatherIfName | not-accessible | current | Interface name |
| 1.3.6.1.4.1.3902.3.6000.150.17.1.2 | Columnzxr10IfSpeedGatherInByteSpeed | read-only | current | Interface Received Rate of Bytes |
| 1.3.6.1.4.1.3902.3.6000.150.17.1.3 | Columnzxr10IfSpeedGatherOutByteSpeed | read-only | current | Interface Sent Rate of Bytes |
| 1.3.6.1.4.1.3902.3.6000.150.17.1.4 | Columnzxr10IfSpeedGatherInPktsSpeed | read-only | current | Interface Received Rate of Packets |
| 1.3.6.1.4.1.3902.3.6000.150.17.1.5 | Columnzxr10IfSpeedGatherOutPktsSpeed | read-only | current | Interface Sent Rate of Packets |
| 1.3.6.1.4.1.3902.3.6000.150.17.1.6 | Columnzxr10IfSpeedGatherInBPeakSpeed | read-only | current | Interface Received Peak Rate of Bytes |
| 1.3.6.1.4.1.3902.3.6000.150.17.1.7 | Columnzxr10IfSpeedGatherInBPeakTime | read-only | current | Interface Received Peak Rate Time of Bytes |
| 1.3.6.1.4.1.3902.3.6000.150.17.1.8 | Columnzxr10IfSpeedGatherOutBPeakSpeed | read-only | current | Interface Sent Peak Rate of Bytes |
| 1.3.6.1.4.1.3902.3.6000.150.17.1.9 | Columnzxr10IfSpeedGatherOutBPeakTime | read-only | current | Interface Sent Peak Rate Time of Bytes |
| 1.3.6.1.4.1.3902.3.6000.150.17.1.10 | Columnzxr10IfSpeedGatherInBitSpeed | read-only | current | Interface Received Rate of Bits |
| 1.3.6.1.4.1.3902.3.6000.150.17.1.11 | Columnzxr10IfSpeedGatherOutBitSpeed | read-only | current | Interface Sent Rate of Bits |
| 1.3.6.1.4.1.3902.3.6000.150.18 | Tablezxr10VxLanTunnelStatTable | not-accessible | current | A list of VxLan tunnel statistices entries. |
| 1.3.6.1.4.1.3902.3.6000.150.18.1 | Rowzxr10VxLanTunnelStatEntry | not-accessible | current | An entry containing statistices information of a VxLan tunnel. |
| 1.3.6.1.4.1.3902.3.6000.150.18.1.1 | Columnzxr10VxLanTunnelStatIfName | not-accessible | current | VxLan Tunnel name. |
| 1.3.6.1.4.1.3902.3.6000.150.18.1.2 | Columnzxr10VxLanTunnelStatInBytes | read-only | current | VxLan Tunnel in bytes. |
| 1.3.6.1.4.1.3902.3.6000.150.18.1.3 | Columnzxr10VxLanTunnelStatInPkts | read-only | current | VxLan Tunnel in packets. |
| 1.3.6.1.4.1.3902.3.6000.150.18.1.4 | Columnzxr10VxLanTunnelStatOutBytes | read-only | current | VxLan Tunnel out bytes. |
| 1.3.6.1.4.1.3902.3.6000.150.18.1.5 | Columnzxr10VxLanTunnelStatOutPkts | read-only | current | VxLan Tunnel out packets. |
| 1.3.6.1.4.1.3902.3.6000.150.18.1.6 | Columnzxr10VxLanTunnelStatInDropBytes | read-only | current | VxLan Tunnel in drop bytes. |
| 1.3.6.1.4.1.3902.3.6000.150.18.1.7 | Columnzxr10VxLanTunnelStatInDropPkts | read-only | current | VxLan Tunnel in drop packets. |
| 1.3.6.1.4.1.3902.3.6000.150.18.1.8 | Columnzxr10VxLanTunnelStatOutDropBytes | read-only | current | VxLan Tunnel out drop bytes. |
| 1.3.6.1.4.1.3902.3.6000.150.18.1.9 | Columnzxr10VxLanTunnelStatOutDropPkts | read-only | current | VxLan Tunnel out drop packets. |
| 1.3.6.1.4.1.3902.3.6000.150.19 | Tablezxr10SpiStatTable | not-accessible | current | A list of Spi statistices entries. |
| 1.3.6.1.4.1.3902.3.6000.150.19.1 | Rowzxr10SpiStatEntry | not-accessible | current | An entry containing statistices information of a spi. |
| 1.3.6.1.4.1.3902.3.6000.150.19.1.1 | Columnzxr10SpiStatIfName | not-accessible | current | Spi name. |
| 1.3.6.1.4.1.3902.3.6000.150.19.1.2 | Columnzxr10SpiStatInBytes | read-only | current | Spi in bytes. |
| 1.3.6.1.4.1.3902.3.6000.150.19.1.3 | Columnzxr10SpiStatInPkts | read-only | current | Spi in packets. |
| 1.3.6.1.4.1.3902.3.6000.150.19.1.4 | Columnzxr10SpiStatInCRCErrorPkts | read-only | current | Spi in CRC-ERROR packets. |
| 1.3.6.1.4.1.3902.3.6000.150.19.1.5 | Columnzxr10SpiStatOutBytes | read-only | current | Spi out bytes. |
| 1.3.6.1.4.1.3902.3.6000.150.19.1.6 | Columnzxr10SpiStatOutPkts | read-only | current | Spi out packets. |
| 1.3.6.1.4.1.3902.3.6000.150.19.1.7 | Columnzxr10SpiStatInDropPkts | read-only | current | Spi in drop packets. |
| 1.3.6.1.4.1.3902.3.6000.150.19.1.8 | Columnzxr10SpiStatOutDropPkts | read-only | current | Spi out drop packets. |
| 1.3.6.1.4.1.3902.3.6000.150.20 | Tablezxr10IfRateStatTable | not-accessible | current | A list of interface rate statistices configuration entries. |
| 1.3.6.1.4.1.3902.3.6000.150.20.1 | Rowzxr10IfRateStatEntry | not-accessible | current | An entry containing interface rate statistices configuration. |
| 1.3.6.1.4.1.3902.3.6000.150.20.1.1 | Columnzxr10IfRateStatIfName | not-accessible | current | Interface name. |
| 1.3.6.1.4.1.3902.3.6000.150.20.1.2 | Columnzxr10IfRateStatPeriod | read-create | current | Interface rate period. Rate period which is a multiple of 10 (sec). |
| 1.3.6.1.4.1.3902.3.6000.150.20.1.100 | Columnzxr10IfRateStatRowStatus | read-create | current | Row status.active(1),notInService(2),notReady(3),createAndGo(4), createAndWait(5),destroy(6). |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| InterfaceIndex | Integer32 (1..2147483647) | current | A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub-layer must re… |
| Switch | INTEGER{disable(0),enable(1)} | current | A switching value, the value of 0 indicates that the closure, the value of 1 indicates that the open. |