ZXR10-L2VPN-MIB
132 objects
This MIB contains managed object definitions for the ZXROSng L2vpn
Imported Objects
| SNMPv2-SMI | Counter32 enterprises Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3902 | Identityzte | This MIB contains managed object definitions for the ZXROSng L2vpn | ||
| 1.3.6.1.4.1.3902.3 | Nodezxr10 | |||
| 1.3.6.1.4.1.3902.3.104 | Nodezxr10l2vpn | |||
| 1.3.6.1.4.1.3902.3.104.10 | Nodezxr10l2vpnObjects | |||
| 1.3.6.1.4.1.3902.3.104.10.1 | Tablezxr10L2vpnSduTable | not-accessible | current | Sdu Table. This table contains one entry per sdu table. |
| 1.3.6.1.4.1.3902.3.104.10.1.1 | Rowzxr10L2vpnSduEntry | not-accessible | current | The parameter of a Sdu entity containing |
| 1.3.6.1.4.1.3902.3.104.10.1.1.1 | Columnzxr10L2vpnSduServiceName | read-only | current | The name of the service instance.It consists of 'Forwarder' modules connected by pseudowires and Attach Circuit. |
| 1.3.6.1.4.1.3902.3.104.10.1.1.2 | Columnzxr10L2vpnSduName | read-only | current | The name of Service Distribution Unit (SDU). |
| 1.3.6.1.4.1.3902.3.104.10.1.1.3 | Columnzxr10L2vpnSduServiceType | read-only | current | The type of service instance.There are several types of L2VPNs:(1)Virtual Private LAN Service(VPLS), and (2)Ethernet over PW,and (3)Multi-segment Pseudowire(MS… |
| 1.3.6.1.4.1.3902.3.104.10.1.1.4 | Columnzxr10L2vpnSduRedandancyMgrName | read-only | current | The name of Redundency-manager. |
| 1.3.6.1.4.1.3902.3.104.10.1.1.5 | Columnzxr10L2vpnSduRedundancyPrimaryPwPeer | read-only | current | The PW's remote endpoint address. |
| 1.3.6.1.4.1.3902.3.104.10.1.1.6 | Columnzxr10L2vpnSduRedundancyPrimaryPwVcid | read-only | current | A non-zero 32-bit connection ID that, together with the PW type, identifies a particular PW. Note that the PW ID and the PW type MUST be the same at both endpo… |
| 1.3.6.1.4.1.3902.3.104.10.1.1.7 | Columnzxr10L2vpnSduRedundancyPrimaryPwVcType | read-only | current | A 15-bit quantity containing a value that represents the type of PW. Assigned values are specified in 'IANA Allocations for Pseudowire Edge to Edge Emulation (… |
| 1.3.6.1.4.1.3902.3.104.10.1.1.8 | Columnzxr10L2vpnSduRedundancyBackupPwPeer | read-only | current | The PW's remote endpoint address. |
| 1.3.6.1.4.1.3902.3.104.10.1.1.9 | Columnzxr10L2vpnSduRedundancyBackupPwVcid | read-only | current | A non-zero 32-bit connection ID that, together with the PW type, identifies a particular PW. Note that the PW ID and the PW type MUST be the same at both endpo… |
| 1.3.6.1.4.1.3902.3.104.10.1.1.10 | Columnzxr10L2vpnSduRedundancyBackupPwVcType | read-only | current | A 15-bit quantity containing a value that represents the type of PW. Assigned values are specified in 'IANA Allocations for Pseudowire Edge to Edge Emulation (… |
| 1.3.6.1.4.1.3902.3.104.10.2 | Tablezxr10L2vpnSacTable | not-accessible | current | Sac Table. This table contains one entry per Sac table. |
| 1.3.6.1.4.1.3902.3.104.10.2.1 | Rowzxr10L2vpnSacEntry | not-accessible | current | The parameter of a Sac entity containing |
| 1.3.6.1.4.1.3902.3.104.10.2.1.1 | Columnzxr10L2vpnSacServiceName | read-only | current | The name of the service instance.It consists of 'Forwarder' modules connected by pseudowires and Attach Circuit. |
| 1.3.6.1.4.1.3902.3.104.10.2.1.2 | Columnzxr10L2vpnSacName | read-only | current | The name of Service Attachment Circuit(SAC). |
| 1.3.6.1.4.1.3902.3.104.10.2.1.3 | Columnzxr10L2vpnSacServiceType | read-only | current | The type of service instance.There are several types of L2VPNs:(1)Virtual Private LAN Service(VPLS), and (2)Virtual Private Wire Service(VPWS),and (3)Virtual L… |
| 1.3.6.1.4.1.3902.3.104.10.2.1.4 | Columnzxr10L2vpnSacServiceDefine | read-only | current | The parameter of service accesse.There are several parameters of service accesse:(1)ethernt,(2)tdm, (3)ppp,(4)hdlc,(5)fr. |
| 1.3.6.1.4.1.3902.3.104.10.2.1.5 | Columnzxr10L2vpnSacEthSwitchSplitHorizone | read-only | current | Split-horizon attribute which used in E-tree service includes two types client/server |
| 1.3.6.1.4.1.3902.3.104.10.2.1.20 | Columnzxr10L2vpnSacEthIngressAdjustType | read-only | current | The Type of VLAN tag ingress-adjustment.It consists of (1)needless,(2)push,(3)pop-outermost,(4)rewrite |
| 1.3.6.1.4.1.3902.3.104.10.2.1.21 | Columnzxr10L2vpnSacEthPushedTag | read-only | current | A service-delimiting tag which pushed onto the incoming packets. |
| 1.3.6.1.4.1.3902.3.104.10.2.1.22 | Columnzxr10L2vpnSacEthRewriteTargetTag | read-only | current | A VLAN tag which rewirted to replace the service-delimiting tags. |
| 1.3.6.1.4.1.3902.3.104.10.2.1.23 | Columnzxr10L2vpnSacTdmJitterBuffer | read-only | current | The jitter-buffer size of TDM emulation. |
| 1.3.6.1.4.1.3902.3.104.10.2.1.24 | Columnzxr10L2vpnSacTdmDistributePeriod | read-only | current | Tthe period of distributing TDM packets to remote end-point. |
| 1.3.6.1.4.1.3902.3.104.10.2.1.25 | Columnzxr10L2vpnSacTdmTimeslots | read-only | current | The time of TDM slots. |
| 1.3.6.1.4.1.3902.3.104.10.2.1.26 | Columnzxr10L2vpnSacTdmStructureType | read-only | current | The structure type of TDM emulation. |
| 1.3.6.1.4.1.3902.3.104.10.2.1.27 | Columnzxr10L2vpnSacEthSwitchGroupID | read-only | current | Split-horizon-Group attribute. |
| 1.3.6.1.4.1.3902.3.104.10.2.1.28 | Columnzxr10L2vpnSacInterworking | read-only | current | The name of SacInterworking. |
| 1.3.6.1.4.1.3902.3.104.10.2.1.29 | Columnzxr10L2vpnSacInterworkingIpLocalCeMac | read-only | current | The LocalCeMac of SacInterworking. |
| 1.3.6.1.4.1.3902.3.104.10.3 | Tablezxr10L2vpnRedundancyTable | not-accessible | current | Redundancy Table. This table contains one entry per Redundancy table. |
| 1.3.6.1.4.1.3902.3.104.10.3.1 | Rowzxr10L2vpnRedundancyEntry | not-accessible | current | The parameter of a Redundancy entity containing |
| 1.3.6.1.4.1.3902.3.104.10.3.1.1 | Columnzxr10L2vpnRedundancyName | read-only | current | The name of redundency-management. |
| 1.3.6.1.4.1.3902.3.104.10.3.1.2 | Columnzxr10L2vpnRedundancySduName | read-only | current | The name of Service Distribution Unit (SDU) belongs to the exact redundency-management instance. |
| 1.3.6.1.4.1.3902.3.104.10.3.1.3 | Columnzxr10L2vpnRedundancyProtectMode | read-only | current | The protectmode of redundency-management instance. There are two modes: (1)oneByOne, (2)onePlusOne |
| 1.3.6.1.4.1.3902.3.104.10.3.1.4 | Columnzxr10L2vpnRedundancyPfsNegoMode | read-only | current | Configure the negotiation mode which include four modes :(1) unsupported, (2)independent, (3)master, (4)slave. |
| 1.3.6.1.4.1.3902.3.104.10.3.1.5 | Columnzxr10L2vpnRedundancyProtectPolicy | read-only | current | The protect-policy of transforming primary-pw into backup-pw.There are two policies:(1)immediately, (2)delayed. |
| 1.3.6.1.4.1.3902.3.104.10.3.1.6 | Columnzxr10L2vpnRedundancyProtectDelayTime | read-only | current | The time of transforming primary-pw into backup-pw. |
| 1.3.6.1.4.1.3902.3.104.10.3.1.7 | Columnzxr10L2vpnRedundancyRevertPolicy | read-only | current | The protectpolicy of transforming primary-pw from backup-pw. There are two policies:(1)immediately, (2)delayed. |
| 1.3.6.1.4.1.3902.3.104.10.3.1.8 | Columnzxr10L2vpnRedundancyRevertDelayTime | read-only | current | The time of transforming primary-pw from backup-pw. |
| 1.3.6.1.4.1.3902.3.104.10.3.1.9 | Columnzxr10L2vpnRedundancyActivePWs | read-only | current | The statues of current active-pws.There are three statues:(1)primary,(2)backup,(3)none. |
| 1.3.6.1.4.1.3902.3.104.10.3.1.10 | Columnzxr10L2vpnRedundancyStandbyPWs | read-only | current | The statues of current standby-pws.There are three statues:(1)primary,(2)backup,(3)none. |
| 1.3.6.1.4.1.3902.3.104.10.3.1.11 | Columnzxr10L2vpnRedundancyInvalidPWs | read-only | current | The statues of current invalid-pws.There are three statues:(1)primary,(2)backup,(3)none. |
| 1.3.6.1.4.1.3902.3.104.10.3.1.12 | Columnzxr10L2vpnRedundancyProtectionCount | read-only | current | The total number of the pws switchover. Transforming primary-pw into backup-pw or transforming primary-pw from backup-pw means one. |
| 1.3.6.1.4.1.3902.3.104.10.3.1.13 | Columnzxr10L2vpnRedundancyLastProtectionTime | read-only | current | The time of the last switchover, which ransform primary-pw into backup-pw or transform primary-pw from backup-pw. |
| 1.3.6.1.4.1.3902.3.104.10.4 | Tablezxr10L2vpnPwTable | not-accessible | current | Pw Table. This table contains one entry per pw table. |
| 1.3.6.1.4.1.3902.3.104.10.4.1 | Rowzxr10L2vpnPwEntry | not-accessible | current | The parameter of a pw entity containing statistics information about a particular PW. |
| 1.3.6.1.4.1.3902.3.104.10.4.1.1 | Columnzxr10L2vpnPwPeer | read-only | current | The PW's remote endpoint address. |
| 1.3.6.1.4.1.3902.3.104.10.4.1.2 | Columnzxr10L2vpnPwVcid | read-only | current | A non-zero 32-bit connection ID that, together with the PW type, identifies a particular PW. Note that the PW ID and the PW type MUST be the same at both endpo… |
| 1.3.6.1.4.1.3902.3.104.10.4.1.3 | Columnzxr10L2vpnPwVcType | read-only | current | A 15-bit quantity containing a value that represents the type of PW. Assigned values are specified in 'IANA Allocations for Pseudowire Edge to Edge Emulation (… |
| 1.3.6.1.4.1.3902.3.104.10.4.1.4 | Columnzxr10L2vpnPwSduName | read-only | current | The name of Service Distribution Unit (SDU). |
| 1.3.6.1.4.1.3902.3.104.10.4.1.5 | Columnzxr10L2vpnPwServiceName | read-only | current | The name of the service instance.It consists of 'Forwarder' modules connected by pseudowires and Attach Circuit. |
| 1.3.6.1.4.1.3902.3.104.10.4.1.6 | Columnzxr10L2vpnPwServiceType | read-only | current | The type of service instance.There are several types of L2VPNs:(1)Virtual Private LAN Service(VPLS), and (2)Ethernet over PW,and (3)Multi-segment Pseudowire(MS… |
| 1.3.6.1.4.1.3902.3.104.10.4.1.7 | Columnzxr10L2vpnPwIsMspwSegment | read-only | current | The MSPW's ability weather the PW is MSPW's member. |
| 1.3.6.1.4.1.3902.3.104.10.4.1.8 | Columnzxr10L2vpnPwLocalLabel | read-only | current | The PW's local label.When egress LER receives a packet over a pseudowire,the PW's local label must be able to determine that the packet was in fact received ov… |
| 1.3.6.1.4.1.3902.3.104.10.4.1.9 | Columnzxr10L2vpnPwRemoteLabel | read-only | current | The PW's remote label.When ingress LER sends a Layer 2 PDU to remote egress LER,it creates an MPLS packets by adding the PW's remote label to the packet,thus c… |
| 1.3.6.1.4.1.3902.3.104.10.4.1.10 | Columnzxr10L2vpnPwSignalType | read-only | current | The type of signaling,including (1)static PW,and (2) the Pwid FEC Element(FEC type 128),and the Generlized Pwid FEC Element(FEC type 129). |
| 1.3.6.1.4.1.3902.3.104.10.4.1.11 | Columnzxr10L2vpnPwLocalGroupId | read-only | current | The PW's local GroupId value.It is an arbitrary 32-bit value that represents a group of PWs that is used to create groups in the PW space.The group ID is inten… |
| 1.3.6.1.4.1.3902.3.104.10.4.1.12 | Columnzxr10L2vpnPwLocalCbit | read-only | current | The PW's local ability weather it is supporting CBit. The bit (C) is used to flag the presence of a control word as follows:C = 1 Control word present on this … |
| 1.3.6.1.4.1.3902.3.104.10.4.1.13 | Columnzxr10L2vpnPwLocalMTU | read-only | current | The PW's local MTU value.This is the Maximum Transmission Unit, excluding encapsulation overhead, of the egresspacket interface that will be transmitting the d… |
| 1.3.6.1.4.1.3902.3.104.10.4.1.14 | Columnzxr10L2vpnPwLocalDescription | read-only | current | The PW's local descripton. This arbitrary, and OPTIONAL, interface description string is used to send a human-readable administrative string describing the int… |
| 1.3.6.1.4.1.3902.3.104.10.4.1.15 | Columnzxr10L2vpnPwLocalStatusWord | read-only | current | The PW's local status value. Each bit in the status code field can be used to indicate a single failure or an event. When a PW is first set up, the PEs MUST at… |
| 1.3.6.1.4.1.3902.3.104.10.4.1.16 | Columnzxr10L2vpnPwLocalStatusSignalAbility | read-only | current | The PW's local status signal ability. Osbits represents support pw operational status notification, PFSbit represents support preferred forwarding status notif… |
| 1.3.6.1.4.1.3902.3.104.10.4.1.17 | Columnzxr10L2vpnPwRemoteGroupId | read-only | current | The PW's remote GroupId value.It is an arbitrary 32-bit value that represents a group of PWs that is used to create groups in the PW space.The group ID is inte… |
| 1.3.6.1.4.1.3902.3.104.10.4.1.18 | Columnzxr10L2vpnPwRemoteCbit | read-only | current | The PW's remote ability weather it is supporting CBit. The bit (C) is used to flag the presence of a control word as follows:C = 1 Control word present on this… |
| 1.3.6.1.4.1.3902.3.104.10.4.1.19 | Columnzxr10L2vpnPwRemoteMTU | read-only | current | The PW's remote MTU value.This is the Maximum Transmission Unit, excluding encapsulation overhead, of the egresspacket interface that will be transmitting the … |
| 1.3.6.1.4.1.3902.3.104.10.4.1.20 | Columnzxr10L2vpnPwRemoteDescription | read-only | current | The PW's remote descripton. This arbitrary, and OPTIONAL, interface description string is used to send a human-readable administrative string describing the in… |
| 1.3.6.1.4.1.3902.3.104.10.4.1.21 | Columnzxr10L2vpnPwRemoteStatusWord | read-only | current | The PW's remote status value. Each bit in the status code field can be used to indicate a single failure or an event. When a PW is first set up, the PEs MUST a… |
| 1.3.6.1.4.1.3902.3.104.10.4.1.22 | Columnzxr10L2vpnPwRemoteStatusSignalAbility | read-only | current | The PW's remote status signal ability. Osbits represents support pw operational status notification, PFSbit represents support preferred forwarding status noti… |
| 1.3.6.1.4.1.3902.3.104.10.4.1.23 | Columnzxr10L2vpnPwNegoedCbit | read-only | current | The PW's negotiated ability weather it is supporting CBit. The bit (C) is used to flag the presence of a control word as follows:C = 1 Control word present on … |
| 1.3.6.1.4.1.3902.3.104.10.4.1.24 | Columnzxr10L2vpnPwNegoedMTU | read-only | current | The PW's negotiated MTU value.This is the Maximum Transmission Unit, excluding encapsulation overhead, of the egresspacket interface that will be transmitting … |
| 1.3.6.1.4.1.3902.3.104.10.4.1.25 | Columnzxr10L2vpnPwNegoedStatusSignalAbility | read-only | current | The PW's negotiated status signal ability. Osbits represents support pw operational status notification, PFSbit represents support preferred forwarding status … |
| 1.3.6.1.4.1.3902.3.104.10.4.1.26 | Columnzxr10L2vpnPwSignalState | read-only | current | The PW's signal state on protocol level. |
| 1.3.6.1.4.1.3902.3.104.10.4.1.27 | Columnzxr10L2vpnPwVccvLocalParas | read-only | current | The PW's local VCCV value. This VCCV capability information indicates to the receiving PE which combinations of Control Channel (CC) andConnectivity Verificati… |
| 1.3.6.1.4.1.3902.3.104.10.4.1.28 | Columnzxr10L2vpnPwVccvRemoteParas | read-only | current | The PW's remote VCCV value. This VCCV capability information indicates to the receiving PE which combinations of Control Channel (CC) andConnectivity Verificat… |
| 1.3.6.1.4.1.3902.3.104.10.4.1.29 | Columnzxr10L2vpnPwVccvNegoedParas | read-only | current | The PW's negotiated VCCV value. This VCCV capability information indicates to the receiving PE which combinations of Control Channel (CC) andConnectivity Verif… |
| 1.3.6.1.4.1.3902.3.104.10.4.1.30 | Columnzxr10L2vpnPwPsnOutLabelDepth | read-only | current | The layer of MPLS label in the packet when it crosses Core Network. |
| 1.3.6.1.4.1.3902.3.104.10.4.1.31 | Columnzxr10L2vpnPwPsnOutLabel1 | read-only | current | A 20-bit quantity containing a value that represents the botton of MPLS label stack.In L2VPN network, this label means the VC label. |
| 1.3.6.1.4.1.3902.3.104.10.4.1.32 | Columnzxr10L2vpnPwPsnOutLabel2 | read-only | current | A 20-bit quantity containing a value that represents the second layer of MPLS label stack from the bottom of MPLS label. |
| 1.3.6.1.4.1.3902.3.104.10.4.1.33 | Columnzxr10L2vpnPwPsnOutLabel3 | read-only | current | A 20-bit quantity containing a value that represents the third layer of MPLS label stack from the bottom of MPLS label. |
| 1.3.6.1.4.1.3902.3.104.10.4.1.34 | Columnzxr10L2vpnPwPsnTunnelType | read-only | current | The tunnel type of Core Network,including (1)LDP label (2)TE label,and (3)BGP label. |
| 1.3.6.1.4.1.3902.3.104.10.4.1.35 | Columnzxr10L2vpnPwPsnTunnelId | read-only | current | The tunnel ID number of Core Network. |
| 1.3.6.1.4.1.3902.3.104.10.4.1.36 | Columnzxr10L2vpnPwSwitchMacWithdraw | read-only | current | The PW's local ability,whether the PW can send Mac-withdraw message.The bit is used to flag the presence as follows:Switch = 1 can send mac-withdraw message on… |
| 1.3.6.1.4.1.3902.3.104.10.4.1.37 | Columnzxr10L2vpnPwServiceState | read-only | current | The service-state of PW ,including (1)down, and (2) up,and (3)unknown. |
| 1.3.6.1.4.1.3902.3.104.10.4.1.38 | Columnzxr10L2vpnPwWorkState | read-only | current | The work-state of PW ,including (1)down, and (2) active,and (3)standby,and (4)unknown. |
| 1.3.6.1.4.1.3902.3.104.10.4.1.39 | Columnzxr10L2vpnPwSwitchSplitHorizone | read-only | current | Split-horizon attribute which used in E-tree service includes two types on/off |
| 1.3.6.1.4.1.3902.3.104.10.4.1.40 | Columnzxr10L3vpnPwSwitchGroupID | read-only | current | Split-horizon-Group attribute . |
| 1.3.6.1.4.1.3902.3.104.10.5 | Tablezxr10L2vpnServiceTable | not-accessible | current | Service Table. This table contains one entry per Service table. |
| 1.3.6.1.4.1.3902.3.104.10.5.1 | Rowzxr10L2vpnServiceEntry | not-accessible | current | The parameter of a Service entity containing |
| 1.3.6.1.4.1.3902.3.104.10.5.1.1 | Columnzxr10L2vpnServiceName | read-only | current | The name of the service instance.It consists of 'Forwarder' modules connected by pseudowires and Attach Circuit. |
| 1.3.6.1.4.1.3902.3.104.10.5.1.2 | Columnzxr10L2vpnServiceType | read-only | current | The type of service instance.There are several types of L2VPNs:(1)Virtual Private LAN Service(VPLS), and (2)Virtual Private Wire Service(VPWS) (3)Multi-segment… |
| 1.3.6.1.4.1.3902.3.104.10.5.1.3 | Columnzxr10L2vpnServiceSac1Name | read-only | current | The first name of Service Attachment Circuit(SAC). |
| 1.3.6.1.4.1.3902.3.104.10.5.1.4 | Columnzxr10L2vpnServiceSac2Name | read-only | current | The second name of Service Attachment Circuit(SAC). |
| 1.3.6.1.4.1.3902.3.104.10.5.1.5 | Columnzxr10L2vpnServiceSdu1Name | read-only | current | The first name of Service Distribution Unit (SDU). |
| 1.3.6.1.4.1.3902.3.104.10.5.1.6 | Columnzxr10L2vpnServiceSdu2Name | read-only | current | The second name of Service Distribution Unit (SDU). |
| 1.3.6.1.4.1.3902.3.104.10.5.1.7 | Columnzxr10L2vpnServiceMTU | read-only | current | The VPLS's MTU value.This is the Maximum Transmission Unit,excluding encapsulation overhead, of the egresspacket interface that will be transmitting the decaps… |
| 1.3.6.1.4.1.3902.3.104.10.5.1.8 | Columnzxr10L2vpnServiceMspwFirstPwPeer | read-only | current | The PW's remote endpoint address. |
| 1.3.6.1.4.1.3902.3.104.10.5.1.9 | Columnzxr10L2vpnServiceMspwFirstPwVcid | read-only | current | A non-zero 32-bit connection ID that, together with the PW type, identifies a particular PW. Note that the PW ID and the PW type MUST be the same at both endpo… |
| 1.3.6.1.4.1.3902.3.104.10.5.1.10 | Columnzxr10L2vpnServiceMspwFirstPWVcType | read-only | current | A 15-bit quantity containing a value that represents the type of PW. Assigned values are specified in 'IANA Allocations for Pseudowire Edge to Edge Emulation (… |
| 1.3.6.1.4.1.3902.3.104.10.5.1.11 | Columnzxr10L2vpnServiceMspwSecondPwPeer | read-only | current | The PW's remote endpoint address. |
| 1.3.6.1.4.1.3902.3.104.10.5.1.12 | Columnzxr10L2vpnServiceMspwSecondPwVcid | read-only | current | A non-zero 32-bit connection ID that, together with the PW type, identifies a particular PW. Note that the PW ID and the PW type MUST be the same at both endpo… |
| 1.3.6.1.4.1.3902.3.104.10.5.1.13 | Columnzxr10L2vpnServiceMspwSecondPwVcType | read-only | current | A 15-bit quantity containing a value that represents the type of PW. Assigned values are specified in 'IANA Allocations for Pseudowire Edge to Edge Emulation (… |
| 1.3.6.1.4.1.3902.3.104.10.6 | Tablezxr10L2vpnVplsTable | not-accessible | current | Vpls Table. This table contains one entry per Vpls table. |
| 1.3.6.1.4.1.3902.3.104.10.6.1 | Rowzxr10L2vpnVplsEntry | not-accessible | current | The parameter of a Vpls entity containing |
| 1.3.6.1.4.1.3902.3.104.10.6.1.1 | Columnzxr10L2vpnVplsName | read-only | current | The name of VPLS instance. |
| 1.3.6.1.4.1.3902.3.104.10.6.1.2 | Columnzxr10L2vpnVplsApplication | read-only | current | The type of service instance.There are several types of L2VPNs:(1)Virtual Private LAN Service(VPLS), and (2)Enhanced-Virtual Private LAN Service(Enhanced-VPLS)… |
| 1.3.6.1.4.1.3902.3.104.10.6.1.3 | Columnzxr10L2vpnVplsModelType | read-only | current | The model of the instance.It consists of (1)rfc4447model2(0) and (2)rfc4447model3(1). |
| 1.3.6.1.4.1.3902.3.104.10.6.1.4 | Columnzxr10L2vpnVplsServiceMTU | read-only | current | The VPLS's MTU value.This is the Maximum Transmission Unit,excluding encapsulation overhead, of the egresspacket interface that will be transmitting the decaps… |
| 1.3.6.1.4.1.3902.3.104.10.6.1.5 | Columnzxr10L2vpnVplsSwitchMacLearning | read-only | current | L2vpn VPLS MAC learning switch. |
| 1.3.6.1.4.1.3902.3.104.10.6.1.6 | Columnzxr10L2vpnVplsSwitchMacAging | read-only | current | L2vpn VPLS MAC aging time switch. |
| 1.3.6.1.4.1.3902.3.104.10.6.1.7 | Columnzxr10L2vpnVplsSwitchStatistics | read-only | current | L2vpn VPLS MAC statistics time switch. |
| 1.3.6.1.4.1.3902.3.104.10.6.1.8 | Columnzxr10L2vpnVplsSwitchMacWithdraw | read-only | current | L2vpn VPLS MAC withdraw time switch. |
| 1.3.6.1.4.1.3902.3.104.10.6.1.9 | Columnzxr10L2vpnVplsTimerMacAging | read-only | current | L2vpn VPLS MAC aging timer. |
| 1.3.6.1.4.1.3902.3.104.10.6.1.10 | Columnzxr10L2vpnVplsAntimovePolicy | read-only | current | L2vpn VPLS anitmove policy. |
| 1.3.6.1.4.1.3902.3.104.10.6.1.11 | Columnzxr10L2vpnVplsL2ptPolicyLACP | read-only | current | L2vpn VPLS L2pt policy for LACP. |
| 1.3.6.1.4.1.3902.3.104.10.6.1.12 | Columnzxr10L2vpnVplsL2ptPolicyDot1X | read-only | current | L2vpn VPLS L2pt policy for Dot1x. |
| 1.3.6.1.4.1.3902.3.104.10.6.1.13 | Columnzxr10L2vpnVplsL2ptPolicyGARP | read-only | current | L2vpn VPLS L2pt policy for GARP. |
| 1.3.6.1.4.1.3902.3.104.10.6.1.14 | Columnzxr10L2vpnVplsL2ptPolicySTP | read-only | current | L2vpn VPLS L2pt policy for STP. |
| 1.3.6.1.4.1.3902.3.104.10.6.1.15 | Columnzxr10L2vpnVplsL2ptPolicyLLDP | read-only | current | L2vpn VPLS L2pt policy for LLDP. |
| 1.3.6.1.4.1.3902.3.104.10.6.1.16 | Columnzxr10L2vpnVplsL2ptPolicyDot3X | read-only | current | L2vpn VPLS L2pt policy for Dot3X. |
| 1.3.6.1.4.1.3902.3.104.10.6.1.17 | Columnzxr10L2vpnVplsL2ptPolicyALL | read-only | current | L2vpn VPLS L2pt policy for ALL. |
| 1.3.6.1.4.1.3902.3.104.10.6.1.18 | Columnzxr10L2vpnVplsL2ptPolicyAllBridgeMulticast | read-only | current | L2vpn VPLS L2pt policy for AllBridgeMulticast. |
| 1.3.6.1.4.1.3902.3.104.10.6.1.19 | Columnzxr10L2vpnVplsL2ptPolicyZDPZTP | read-only | current | L2vpn VPLS L2pt policy for ZDPZTP. |
| 1.3.6.1.4.1.3902.3.104.10.10 | Nodezxr10l2vpnGlobalPara | |||
| 1.3.6.1.4.1.3902.3.104.10.10.1 | Scalarzxr10L2vpnGlobalPWCapatity | read-only | current | The summary information about max_num of PWs'configuration. |
| 1.3.6.1.4.1.3902.3.104.10.10.2 | Scalarzxr10L2vpnGlobalPWUsed | read-only | current | The summary information about current_num of PWs'configuration. |
| 1.3.6.1.4.1.3902.3.104.10.20 | Scalarzxr10L2vpnEnable | read-only | current | Enable L2VPN service. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| L2vpnPWType | INTEGER { unknown(0), fr-dlci-martini(1), aal5-sdu(2), atm-cell(3), vlan(4), ethernet(5), hdlc(6), ppp(7), sdh-cesom(8), atm-vccn(9), atm-vpcn(10), ip(11), atm-vcc1(12), atm-vpc1(13), aal5-pdu(14), fr-port(15), sdh-ceop(16), e1(17), t1-ds1(18), e3(19), t3-ds3(20), cesopsn(21), tdm-aal1(22), tdm-with-cas(23), tdm-aal2(24), fr-dlct(25) } | current | L2vpn PW Type. Assigned values are specified in 'IANA Allocations for Pseudowire Edge to Edge Emulation (PWE3) |
| L2vpnVplsPolicy | INTEGER { tunnelling(1), discarding(2), terminating(3), tunnellingMonitor(4) } | current | L2vpn Vpls Policy. |