ZXR10-MPLS-LDP-MIB
188 objects
This MIB contains managed object definitions for the 'Multiprotocol Label Switching, Label Distribution Protocol, LDP' document.
Imported Objects
| INET-ADDRESS-MIB | InetAddress InetAddressPrefixLength InetAddressType |
| MPLS-TC-STD-MIB | MplsLdpIdentifier |
| SNMPv2-SMI | Counter32 Counter64 enterprises IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString TimeStamp |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3902 | Nodezte | |||
| 1.3.6.1.4.1.3902.3 | Nodezxr10 | |||
| 1.3.6.1.4.1.3902.3.314 | Nodezxr10MplsLdp | |||
| 1.3.6.1.4.1.3902.3.314.1 | Identityzxr10mplsLdpMIB | from | to | This MIB contains managed object definitions for the 'Multiprotocol Label Switching, Label Distribution Protocol, LDP' document. |
| 1.3.6.1.4.1.3902.3.314.1.5 | Nodezxr10LdpTrapVarsObject | |||
| 1.3.6.1.4.1.3902.3.314.1.5.1 | Scalarzxr10LdpLspFec | accessible-for-notify | current | The LSP FEC in IP address format. |
| 1.3.6.1.4.1.3902.3.314.1.5.2 | Scalarzxr10LdpLspFecLen | accessible-for-notify | current | The length in bits of the LSP FEC prefix. |
| 1.3.6.1.4.1.3902.3.314.1.5.3 | Scalarzxr10LdpLspDownReason | accessible-for-notify | current | The reason why the LSP went down. Can be one of the following: the topology changed, the neighbor withdrew the label, the neighbor went down, the filter change… |
| 1.3.6.1.4.1.3902.3.314.1.5.4 | Scalarzxr10LdpRtrid | accessible-for-notify | current | The router id of the sending router. |
| 1.3.6.1.4.1.3902.3.314.1.5.5 | Scalarzxr10LdpSesDownReason | accessible-for-notify | current | The reason why the session transitioned to nonexistent state. Can be one of the following: unknown reason, hold time expired, connection time expired, all adja… |
| 1.3.6.1.4.1.3902.3.314.1.5.6 | Scalarzxr10LdpOutIfName | accessible-for-notify | current | The name of the interface. |
| 1.3.6.1.4.1.3902.3.314.1.5.7 | Scalarzxr10LdpLspFecAddrType | accessible-for-notify | current | The Internet address type of the LSP FEC . |
| 1.3.6.1.4.1.3902.3.314.1.5.8 | Scalarzxr10LdpRtridAddrType | accessible-for-notify | current | The Internet address type of the router id . |
| 1.3.6.1.4.1.3902.3.314.1.6 | Tablezxr10LdpFecTable | not-accessible | current | Fec Table. This table contains one entry per fec table. |
| 1.3.6.1.4.1.3902.3.314.1.6.1 | Rowzxr10LdpFecEntry | not-accessible | current | The parameter of a fec entity containing statistics information about a particular LDP FEC. |
| 1.3.6.1.4.1.3902.3.314.1.6.1.1 | Columnzxr10LdpFecIndex | read-only | current | The index which uniquely identifies this entry. |
| 1.3.6.1.4.1.3902.3.314.1.6.1.2 | Columnzxr10LdpFecType | read-only | current | The type of this LDP FEC. If the value of this object is 'indirect (0)' then the FEC type described by this row is for address prefixes and not included in loc… |
| 1.3.6.1.4.1.3902.3.314.1.6.1.3 | Columnzxr10LdpFecAddrType | read-only | current | The value of this object is the type of the Internet address. The value of this object, decides how the value of the zxr10LdpFecAddr object is interpreted. |
| 1.3.6.1.4.1.3902.3.314.1.6.1.4 | Columnzxr10LdpFecAddr | read-only | current | LDP FEC address. |
| 1.3.6.1.4.1.3902.3.314.1.6.1.5 | Columnzxr10LdpFecAddrLength | read-only | current | The LDP FEC length (in bits). |
| 1.3.6.1.4.1.3902.3.314.1.6.1.6 | Columnzxr10LdpFecState | read-only | current | The state of this LDP FEC. If the FEC exists with the local popular tag and the outgoing label then the value of this object is 'ok(1)'. If the FEC exists with… |
| 1.3.6.1.4.1.3902.3.314.1.6.1.7 | Columnzxr10LdpIngressOctets | read-only | current | The number of octets of traffic originated on this box, forwarded over the current LDP FEC. The number reported is not realtime and may be subject to several m… |
| 1.3.6.1.4.1.3902.3.314.1.6.1.8 | Columnzxr10LdpIngressPackets | read-only | current | The number of packets of traffic originated on this box, forwarded over the current LDP FEC. The number reported is not realtime and may be subject to several … |
| 1.3.6.1.4.1.3902.3.314.1.6.1.9 | Columnzxr10LdpTransitOctets | read-only | current | The number of octets of traffic destined to this FEC, originated on a different box, forwarded over the current LDP FEC. The number reported is not realtime an… |
| 1.3.6.1.4.1.3902.3.314.1.6.1.10 | Columnzxr10LdpTransitPackets | read-only | current | The number of packets of traffic destined to this FEC, originated on a different box, forwarded over the current LDP FEC. The number reported is not realtime a… |
| 1.3.6.1.4.1.3902.3.314.1.6.1.11 | Columnzxr10LdpFecLspUp | read-only | current | The value of sysUpTime at the time of the most recent change in state of LSP about FEC from down to up. If no such changes have occurred since the last re-init… |
| 1.3.6.1.4.1.3902.3.314.1.6.1.12 | Columnzxr10LdpFecLspDown | read-only | current | The value of sysUpTime at the time of the most recent change in state of LSP about FEC from up to down. If no such changes have occurred since the last re-init… |
| 1.3.6.1.4.1.3902.3.314.1.6.1.13 | Columnzxr10LdpFecLspDownReason | read-only | current | The reason why the LSP went down about the most recent change in state of LSP from up to down. Can be one of the following: the topology changed, the neighbor … |
| 1.3.6.1.4.1.3902.3.314.1.6.1.14 | Columnzxr10LdpLostIngressOctets | read-only | current | The number of octets of traffic lost on this box, forwarded over the current LDP FEC. The number reported is not realtime and may be subject to several minutes… |
| 1.3.6.1.4.1.3902.3.314.1.6.1.15 | Columnzxr10LdpLostIngressPackets | read-only | current | The number of packets of traffic lost on this box, forwarded over the current LDP FEC. The number reported is not realtime and may be subject to several minute… |
| 1.3.6.1.4.1.3902.3.314.1.6.1.16 | Columnzxr10LdpLostTransitOctets | read-only | current | The number of lost octets of traffic destined to this FEC, originated on a different box, forwarded over the current LDP FEC. The number reported is not realti… |
| 1.3.6.1.4.1.3902.3.314.1.6.1.17 | Columnzxr10LdpLostTransitPackets | read-only | current | The number of lost packets of traffic destined to this FEC, originated on a different box, forwarded over the current LDP FEC. The number reported is not realt… |
| 1.3.6.1.4.1.3902.3.314.1.7 | Tablezxr10LdpBfdTable | not-accessible | current | Bfd Table. This table contains one entry per bfd table. |
| 1.3.6.1.4.1.3902.3.314.1.7.1 | Rowzxr10LdpBfdEntry | not-accessible | current | The parameter of a bfd entity. |
| 1.3.6.1.4.1.3902.3.314.1.7.1.1 | Columnzxr10LdpBfdAddrType | not-accessible | current | The value of this object is the type of the Internet address. The value of this object, decides how the value of the zxr10LdpBfdDstAddr object is interpreted. |
| 1.3.6.1.4.1.3902.3.314.1.7.1.2 | Columnzxr10LdpBfdDstAddr | not-accessible | current | The address about FEC related to BFD. |
| 1.3.6.1.4.1.3902.3.314.1.7.1.3 | Columnzxr10LdpBfdPrefixLength | not-accessible | current | The mask length of the FEC related to BFD. |
| 1.3.6.1.4.1.3902.3.314.1.7.1.4 | Columnzxr10LdpBfdMinTxInterval | read-only | current | The time span that two control package is send. |
| 1.3.6.1.4.1.3902.3.314.1.7.1.5 | Columnzxr10LdpBfdMinRxInterval | read-only | current | The time span that two control package is received. |
| 1.3.6.1.4.1.3902.3.314.1.7.1.6 | Columnzxr10LdpBfdMult | read-only | current | If this parameter multiply zxr10LdpBfdMinRxInterval a control message is no received it means the lsp has some problem. |
| 1.3.6.1.4.1.3902.3.314.1.7.1.7 | Columnzxr10LdpBfdLspEffect | read-only | current | A fec needs bfd protection. |
| 1.3.6.1.4.1.3902.3.314.1.7.1.8 | Columnzxr10LdpBfdIfUp | read-only | current | If the bfd is up. |
| 1.3.6.1.4.1.3902.3.314.1.7.1.9 | Columnzxr10LdpBfdSrcAddr | read-only | current | The source address specified with package of LSP PING. |
| 1.3.6.1.4.1.3902.3.314.1.7.1.10 | Columnzxr10LdpBfdProtectBind | read-only | current | FRR or ECMP protect bind flag. If the value is 1,then not support protect bind. If the value is 2,then support protect bind. |
| 1.3.6.1.4.1.3902.3.314.1.8 | Tablezxr10LdpGrTable | not-accessible | current | GR Table. This table contains one entry per GR table. |
| 1.3.6.1.4.1.3902.3.314.1.8.1 | Rowzxr10LdpGrEntry | not-accessible | current | The parameter of a GR entity about session. |
| 1.3.6.1.4.1.3902.3.314.1.8.1.1 | Columnzxr10LdpGrSessLocalId | read-only | current | The identifier of local lsr used to identify a session relating GR. |
| 1.3.6.1.4.1.3902.3.314.1.8.1.2 | Columnzxr10LdpGrSessPeerId | read-only | current | The identifier of peer lsr used to identify a session relating GR. |
| 1.3.6.1.4.1.3902.3.314.1.8.1.3 | Columnzxr10LdpGrSessRestart | read-only | current | If the session supports GR. |
| 1.3.6.1.4.1.3902.3.314.1.8.1.4 | Columnzxr10LdpGrSessNeighborLiveTime | read-only | current | The max time(seconds) of the lsr can wait to reconnect with peer lsr in GR process. |
| 1.3.6.1.4.1.3902.3.314.1.8.1.5 | Columnzxr10LdpGrSessMaxRecoveryTime | read-only | current | The max time(seconds) of the session mapping the label from the peer lsr after reconnect with peer lsr in GR process. |
| 1.3.6.1.4.1.3902.3.314.1.8.1.6 | Columnzxr10LdpSessIsInGr | read-only | current | If the session is in GR process. |
| 1.3.6.1.4.1.3902.3.314.1.8.1.7 | Columnzxr10LdpGrSessState | read-only | current | Indicates the status of the GR session. |
| 1.3.6.1.4.1.3902.3.314.1.8.1.8 | Columnzxr10LdpGrSessWaitTime | read-only | current | The remaining time(seconds) of waiting for session reconnection and recovering in GR process. If the value of zxr10LdpSessIsInGr is false, then the value of th… |
| 1.3.6.1.4.1.3902.3.314.1.9 | Tablezxr10LdpInterfaceTable | not-accessible | current | Interface Table. This table contains one entry per interface table. |
| 1.3.6.1.4.1.3902.3.314.1.9.1 | Rowzxr10LdpInterfaceEntry | not-accessible | current | The parameter of an interface entity relating LDP. |
| 1.3.6.1.4.1.3902.3.314.1.9.1.1 | Columnzxr10LdpInterfaceType | read-only | current | The value of this object is the type of the Internet address. The value of this object, decides how the value of the zxr10LdpInterfaceAddr object is interprete… |
| 1.3.6.1.4.1.3902.3.314.1.9.1.2 | Columnzxr10LdpInterfaceIndex | read-only | current | The index of the interface. |
| 1.3.6.1.4.1.3902.3.314.1.9.1.3 | Columnzxr10LdpInterfaceName | read-only | current | The name of the interface. |
| 1.3.6.1.4.1.3902.3.314.1.9.1.4 | Columnzxr10LdpInterfaceAddr | read-only | current | The host ip address of the interface. |
| 1.3.6.1.4.1.3902.3.314.1.9.1.5 | Columnzxr10LdpInterfaceAdminStatus | read-only | current | The administer status of the interface. |
| 1.3.6.1.4.1.3902.3.314.1.9.1.6 | Columnzxr10LdpInterfaceOperStatus | read-only | current | The optrater status of the interface. |
| 1.3.6.1.4.1.3902.3.314.1.9.1.7 | Columnzxr10LdpInterfaceTransAddress | read-only | current | IP address to use for LDP transport address. |
| 1.3.6.1.4.1.3902.3.314.1.9.1.8 | Columnzxr10LdpInterfaceTransAddrType | read-only | current | The value of this object is the type of the Internet address. The value of this object, decides how the value of the zxr10LdpInterfaceTransAddress object is in… |
| 1.3.6.1.4.1.3902.3.314.1.10 | Tablezxr10LdpLabelAdvertiseTable | not-accessible | current | Acl Table. This table contains one entry per acl table. |
| 1.3.6.1.4.1.3902.3.314.1.10.1 | Rowzxr10LdpLabelAdvertiseEntry | not-accessible | current | The parameter of an acl entry relating label advertisement. |
| 1.3.6.1.4.1.3902.3.314.1.10.1.1 | Columnzxr10LdpLabelAdvertiseForACL | read-only | current | The acl number used to filtrate which labels is acceptable. |
| 1.3.6.1.4.1.3902.3.314.1.10.1.2 | Columnzxr10LdpLabelAdvertiseToAcl | read-only | current | The acl number used to filtrate destination of the label sent. |
| 1.3.6.1.4.1.3902.3.314.1.11 | Tablezxr10LdpEntityHelloIntervTable | not-accessible | current | Hello Table. This table contains one entry per hello table. |
| 1.3.6.1.4.1.3902.3.314.1.11.1 | Rowzxr10LdpEntityHelloIntervEntry | not-accessible | current | The parameter of a hello entity entry. |
| 1.3.6.1.4.1.3902.3.314.1.11.1.1 | Columnzxr10LdpEntityHelloLocalId | read-only | current | The identifier of local lsr used to identify a session. |
| 1.3.6.1.4.1.3902.3.314.1.11.1.2 | Columnzxr10LdpEntityHelloPeerId | read-only | current | The identifier of peer lsr used to identify a session. |
| 1.3.6.1.4.1.3902.3.314.1.11.1.3 | Columnzxr10LdpEntityHelloMibIndex | read-only | current | An identifier for this specific adjacency. |
| 1.3.6.1.4.1.3902.3.314.1.11.1.4 | Columnzxr10LdpEntityHelloIfIndex | read-only | current | The index of interface about hello. If the value is 0xFFFFFFFF then the hello type is targeted-hello. |
| 1.3.6.1.4.1.3902.3.314.1.11.1.5 | Columnzxr10LdpEntityHelloNexthopAddrType | read-only | current | The value of this object is the type of the Internet address. The value of this object, decides how the value of the zxr10LdpEntityHelloNexthopAddr object is i… |
| 1.3.6.1.4.1.3902.3.314.1.11.1.6 | Columnzxr10LdpEntityHelloNexthopAddr | read-only | current | The Nexthop Address about hello. |
| 1.3.6.1.4.1.3902.3.314.1.11.1.7 | Columnzxr10LdpEntityHelloHoldTimer | read-only | current | The max time between two recving hello message. |
| 1.3.6.1.4.1.3902.3.314.1.11.1.8 | Columnzxr10LdpEntityHelloSendTimer | read-only | current | The time span between two sending hello message. |
| 1.3.6.1.4.1.3902.3.314.1.12 | Tablezxr10LdpMd5Table | not-accessible | current | Ldp MD5 Table. This table contains one entry per MD5 table. |
| 1.3.6.1.4.1.3902.3.314.1.12.1 | Rowzxr10LdpMd5Entry | not-accessible | current | The parameter of a MD5 entry containing information about the session set password. |
| 1.3.6.1.4.1.3902.3.314.1.12.1.1 | Columnzxr10LdpMd5NeighborAddr | read-only | current | The peer address as the index of MD5. |
| 1.3.6.1.4.1.3902.3.314.1.12.1.2 | Columnzxr10LdpMd5PwdFlag | read-only | current | If the MD5 is successfully registered. |
| 1.3.6.1.4.1.3902.3.314.1.12.1.3 | Columnzxr10LdpMd5Pwd | read-only | current | The password used for communication between lsrs. |
| 1.3.6.1.4.1.3902.3.314.1.12.1.4 | Columnzxr10LdpMd5Encrypt | read-only | current | The password is encrypted. |
| 1.3.6.1.4.1.3902.3.314.1.13 | Tablezxr10LdpSessTable | not-accessible | current | Ldp Session Table. This table contains one entry per session if it is successfully registered. |
| 1.3.6.1.4.1.3902.3.314.1.13.1 | Rowzxr10LdpSessEntry | not-accessible | current | The parameter of a session entry containing information about the session. |
| 1.3.6.1.4.1.3902.3.314.1.13.1.1 | Columnzxr10LdpSessLocalId | read-only | current | The identifier of local lsr used to identify a session. |
| 1.3.6.1.4.1.3902.3.314.1.13.1.2 | Columnzxr10LdpSessPeerId | read-only | current | The identifier of peer lsr used to identify a session. |
| 1.3.6.1.4.1.3902.3.314.1.13.1.3 | Columnzxr10LdpSessHelloNumber | read-only | current | The hello adjacency numbers of the session. |
| 1.3.6.1.4.1.3902.3.314.1.13.1.4 | Columnzxr10LdpSessKeepAlive | read-only | current | The time show how long the session should be keep alive if no ldp message or the session disappeared. |
| 1.3.6.1.4.1.3902.3.314.1.13.1.5 | Columnzxr10LdpSessCurBkoff | read-only | current | The time shows how long the session should wait to try to reconnect with peer lsr. |
| 1.3.6.1.4.1.3902.3.314.1.13.1.6 | Columnzxr10LdpSessTcpRetry | read-only | current | The time of the lsr retry to create a session with peer lsr. |
| 1.3.6.1.4.1.3902.3.314.1.13.1.7 | Columnzxr10LdpSessLife | read-only | current | The time after the session receive last ldp message. |
| 1.3.6.1.4.1.3902.3.314.1.13.1.8 | Columnzxr10LdpSessState | read-only | current | Indicates the status of the session. |
| 1.3.6.1.4.1.3902.3.314.1.13.1.9 | Columnzxr10LdpSessIfName | read-only | current | The name of the interface about session up or down. And the value of object is 'null' When target session sets up. |
| 1.3.6.1.4.1.3902.3.314.1.13.1.10 | Columnzxr10LdpSessionUp | read-only | current | The value of sysUpTime at the time of the most recent change in state of session from openrec(3) or opensent(4) to operational(5). If no such changes have occu… |
| 1.3.6.1.4.1.3902.3.314.1.13.1.11 | Columnzxr10LdpSessionDown | read-only | current | The value of sysUpTime at the time of the most recent change in state of session from operational(5) to nonexistent(1). If no such changes have occurred since … |
| 1.3.6.1.4.1.3902.3.314.1.13.1.12 | Columnzxr10LdpSessionDownReason | read-only | current | The reason why the session transitioned from operational to nonexistent state. Can be one of the following: unknown reason, hold time expired, connection time … |
| 1.3.6.1.4.1.3902.3.314.1.14 | Nodezxr10LdpLsrAttrObjects | |||
| 1.3.6.1.4.1.3902.3.314.1.14.1 | Scalarzxr10LdpLsrId | read-only | current | The router id of the LSR. |
| 1.3.6.1.4.1.3902.3.314.1.14.2 | Scalarzxr10LdpInstanceName | read-only | current | The name of the VPN instance. |
| 1.3.6.1.4.1.3902.3.314.1.14.3 | Scalarzxr10LdpMplsIp | read-only | current | Show if the mpls ldp is up. |
| 1.3.6.1.4.1.3902.3.314.1.14.4 | Scalarzxr10LdpTrap | read-create | current | If the value of this object is 1, then the function of Ldp Trap is enable. |
| 1.3.6.1.4.1.3902.3.314.1.14.5 | Scalarzxr10LdpAccessFecACL | read-only | current | The ACL name about LDP fec filter. |
| 1.3.6.1.4.1.3902.3.314.1.14.6 | Scalarzxr10LdpAccessFecBgp | read-only | current | If the value of this object is 1, then access bgp route as fec. |
| 1.3.6.1.4.1.3902.3.314.1.14.7 | Scalarzxr10LdpAccessFecHost | read-only | current | If the value of this object is 1, then access host route as fec only. |
| 1.3.6.1.4.1.3902.3.314.1.14.8 | Scalarzxr10LdpDirectHelloHoldTime | read-only | current | LDP discovery direct hello holdtime. A value of 0 means the default, which is 15 seconds for Link Hellos and 45 seconds for Targeted Hellos. A value of 65535 i… |
| 1.3.6.1.4.1.3902.3.314.1.14.9 | Scalarzxr10LdpDirectHelloInterTime | read-only | current | LDP discovery direct hello interval. A value of 0 means the default, which is 5 seconds for Link Hellos and 15 seconds for Targeted Hellos. A value of 65535 in… |
| 1.3.6.1.4.1.3902.3.314.1.14.10 | Scalarzxr10LdpTargetHelloHoldTime | read-only | current | LDP discovery target hello holdtime. A value of 0 means the default, which is 15 seconds for Link Hellos and 45 seconds for Targeted Hellos. A value of 65535 i… |
| 1.3.6.1.4.1.3902.3.314.1.14.11 | Scalarzxr10LdpTargetHelloInterTime | read-only | current | LDP discovery target hello interval. A value of 0 means the default, which is 5 seconds for Link Hellos and 15 seconds for Targeted Hellos. A value of 65535 in… |
| 1.3.6.1.4.1.3902.3.314.1.14.12 | Scalarzxr10LdpBackoffInitialTime | read-only | current | Initial session backoff time in seconds. A value of 0 means the default, which is 15 seconds for Initial backoff time and 120 seconds for Maximum backoff time.… |
| 1.3.6.1.4.1.3902.3.314.1.14.13 | Scalarzxr10LdpBackoffMaximumTime | read-only | current | Maximum session backoff time in seconds. A value of 0 means the default, which is 15 seconds for Initial backoff time and 120 seconds for Maximum backoff time.… |
| 1.3.6.1.4.1.3902.3.314.1.14.14 | Scalarzxr10LdpEgressFor | read-only | current | Acl specifying controls on destination prefixes. |
| 1.3.6.1.4.1.3902.3.314.1.14.15 | Scalarzxr10LdpEgressNextHop | read-only | current | Acl specifying controls on nexthop. |
| 1.3.6.1.4.1.3902.3.314.1.14.16 | Scalarzxr10LdpConnWithDod | read-only | obsolete | If the value of this object is 1, then the LDP connect with dod mode LSR is enable. |
| 1.3.6.1.4.1.3902.3.314.1.14.17 | Scalarzxr10LdpExplicitNull | read-only | current | If the value of this object is 1, then advertise explicit null label in place of implicit null. |
| 1.3.6.1.4.1.3902.3.314.1.14.18 | Scalarzxr10LdpExplicitNullFor | read-only | current | Acl specifying controls on destination prefixes. |
| 1.3.6.1.4.1.3902.3.314.1.14.19 | Scalarzxr10LdpExplicitNullTo | read-only | current | Acl specifying controls on LDP peers. |
| 1.3.6.1.4.1.3902.3.314.1.14.20 | Scalarzxr10LdpHoldTime | read-only | current | LDP session holdtime is set. A value of 0 means the default, which is 15 seconds for session holdtime. A value of 65535 indicates an infinite hold time. |
| 1.3.6.1.4.1.3902.3.314.1.14.21 | Scalarzxr10LdpLabelRequestFor | read-only | current | ACL name about specify acceptable downstream on demand dest. |
| 1.3.6.1.4.1.3902.3.314.1.14.22 | Scalarzxr10LdpLabelAdvertise | read-only | current | If the value of this object is 1, then label advertise is enable. |
| 1.3.6.1.4.1.3902.3.314.1.14.23 | Scalarzxr10LdpLabelAdvertiseOldStyle | read-only | current | If the value of this object is 1, then label advertise use old style(TDP) method for matching prefix acl. |
| 1.3.6.1.4.1.3902.3.314.1.14.24 | Scalarzxr10LdpStyle | read-only | current | If the value of this object is 1, then the new style to reset keepalive timer is enable. |
| 1.3.6.1.4.1.3902.3.314.1.14.25 | Scalarzxr10LdpDebugAdvertisements | read-only | current | If the value of this object is 1, then LDP debug information of label and address advertisements could be get. |
| 1.3.6.1.4.1.3902.3.314.1.14.26 | Scalarzxr10LdpDebugBindings | read-only | current | If the value of this object is 1, then LDP debug information of Label bindings and other label Information base (LIB) changes could be get. |
| 1.3.6.1.4.1.3902.3.314.1.14.27 | Scalarzxr10LdpDebugMessagesReceived | read-only | current | If the value of this object is 1, then LDP debug information of LDP received messages, including periodic keep alive could be get. |
| 1.3.6.1.4.1.3902.3.314.1.14.28 | Scalarzxr10LdpDebugMessagesSent | read-only | current | If the value of this object is 1, then LDP debug information of LDP sent messages, including periodic keep alive could be get. |
| 1.3.6.1.4.1.3902.3.314.1.14.29 | Scalarzxr10LdpDebugSessionIO | read-only | current | If the value of this object is 1, then LDP debug information of session could be get. |
| 1.3.6.1.4.1.3902.3.314.1.14.30 | Scalarzxr10LdpDebugSessionStateMachine | read-only | current | If the value of this object is 1, then LDP debug information of session state machine could be get. |
| 1.3.6.1.4.1.3902.3.314.1.14.31 | Scalarzxr10LdpDebugTransportConnections | read-only | current | If the value of this object is 1, then LDP debug information of transport and discovery connections could be get. |
| 1.3.6.1.4.1.3902.3.314.1.14.32 | Scalarzxr10LdpDebugTransportEvents | read-only | current | If the value of this object is 1, then LDP debug information of transport and discovery events could be get. |
| 1.3.6.1.4.1.3902.3.314.1.14.33 | Scalarzxr10LdpInstanceNo | read-only | current | The Number of the LDP instance. If the value of this object is 0, then don't exist LDP public instance |
| 1.3.6.1.4.1.3902.3.314.1.14.34 | Scalarzxr10LdpRouterIdIf | read-only | current | The interface selected to prefer for LDP identifier address. |
| 1.3.6.1.4.1.3902.3.314.1.15 | Nodezxr10LdpNotify | |||
| 1.3.6.1.4.1.3902.3.314.1.15.1 | Notificationzxr10LdpSesUp | current | The SNMP trap that is generated when the value of 'zxr10MplsLdpSesState' enters the 'operational(5) state. | |
| 1.3.6.1.4.1.3902.3.314.1.15.2 | Notificationzxr10LdpSesDown | current | The SNMP trap that is generated when the value of 'zxr10MplsLdpSesState' leaves the 'operational(5) state. The value of zxr10LdpSesDownIf is one of the neighbo… | |
| 1.3.6.1.4.1.3902.3.314.1.15.3 | Notificationzxr10LdpLspUp | current | The SNMP trap that is generated when an LSP comes up. | |
| 1.3.6.1.4.1.3902.3.314.1.15.4 | Notificationzxr10LdpLspDown | current | The SNMP trap that is generated when the LSP goes down. | |
| 1.3.6.1.4.1.3902.3.314.1.15.5 | Notificationzxr10LdpLspPathUp | current | An mplsLspPathUp trap signifies that the specified path mplsPathName for the specified LSP mplsLspName came up. | |
| 1.3.6.1.4.1.3902.3.314.1.15.6 | Notificationzxr10LdpLspPathDown | current | An mplsLspPathDown trap signifies that the specified path mplsPathName for the specified LSP mplsLspName went down. | |
| 1.3.6.1.4.1.3902.3.314.1.15.7 | Notificationzxr10LdpLspChange | current | An mplsLspChange trap signifies that the specified LSP has switched traffic to the new active path 'toLspPath'. The LSP maintains up state before and after the… | |
| 1.3.6.1.4.1.3902.3.314.1.16 | Tablezxr10LdpInstCfgTable | not-accessible | current | Ldp Instance Table. This table contains one entry per instance table. |
| 1.3.6.1.4.1.3902.3.314.1.16.1 | Rowzxr10LdpInstCfgEntry | not-accessible | current | The parameter of an instance entity about ldp instance. |
| 1.3.6.1.4.1.3902.3.314.1.16.1.1 | Columnzxr10LdpInstNo | not-accessible | current | The Number of the LDP instance. If the value of this object is 0, then don't exist LDP public instance |
| 1.3.6.1.4.1.3902.3.314.1.16.1.2 | Columnzxr10LdpFilterPaketFor | read-only | current | ACL name about specify filter packet on source address. |
| 1.3.6.1.4.1.3902.3.314.1.16.1.3 | Columnzxr10LdpGr | read-only | current | Show if the mpls ldp graceful-restart is enabled. |
| 1.3.6.1.4.1.3902.3.314.1.16.1.4 | Columnzxr10LdpGrMaxRecoveryTime | read-only | current | LDP session max recovery time is set. Default is 120 seconds. |
| 1.3.6.1.4.1.3902.3.314.1.16.1.5 | Columnzxr10LdpGrNeiLivenessTime | read-only | current | LDP session keeps its stale label-FEC bindings is set. Default is 120 seconds. |
| 1.3.6.1.4.1.3902.3.314.1.16.1.6 | Columnzxr10LdpLabelRetentionMode | read-only | current | Show the mpls ldp label retention mode. |
| 1.3.6.1.4.1.3902.3.314.1.16.1.7 | Columnzxr10LdpLspControlMode | read-only | current | Show the mpls ldp lsp control mode. |
| 1.3.6.1.4.1.3902.3.314.1.16.1.8 | Columnzxr10LdpTrafficCntAcl | read-only | current | ACL name about specify IPv4 fec want to get traffic count. |
| 1.3.6.1.4.1.3902.3.314.1.16.1.9 | Columnzxr10LdpGlblAutoCfgMode | read-only | current | Show the mpls ldp IPv4 interface global auto config mode. |
| 1.3.6.1.4.1.3902.3.314.1.16.1.10 | Columnzxr10LdpV6TrafficCntAcl | read-only | current | ACL name about specify IPv6 fec want to get traffic count. |
| 1.3.6.1.4.1.3902.3.314.1.16.1.11 | Columnzxr10LdpV6GlblAutoCfgMode | read-only | current | Show the mpls ldp IPv6 interface global auto config mode. |
| 1.3.6.1.4.1.3902.3.314.1.17 | Tablezxr10LdpV4IntfCfgTable | not-accessible | current | Ipv4 Ldp Interface Table. This table contains one entry per v4 interface table. |
| 1.3.6.1.4.1.3902.3.314.1.17.1 | Rowzxr10LdpV4IntfCfgEntry | not-accessible | current | The parameter of a v4 interface entity. |
| 1.3.6.1.4.1.3902.3.314.1.17.1.1 | Columnzxr10LdpV4IntfLdpInstNo | not-accessible | current | The Number of the LDP instance. If the value of this object is 0, then don't exist LDP public instance |
| 1.3.6.1.4.1.3902.3.314.1.17.1.2 | Columnzxr10LdpV4IntfName | not-accessible | current | The name of the interface. |
| 1.3.6.1.4.1.3902.3.314.1.17.1.3 | Columnzxr10LdpV4IntfLblDistributeMode | read-only | current | The distribution mode of the interface. |
| 1.3.6.1.4.1.3902.3.314.1.17.1.4 | Columnzxr10LdpV4IntfGtsm | read-only | current | The gtsm of the interface. |
| 1.3.6.1.4.1.3902.3.314.1.18 | Tablezxr10LdpV6IntfCfgTable | not-accessible | current | Ipv6 Ldp Interface Table. This table contains one entry per v6 interface table. |
| 1.3.6.1.4.1.3902.3.314.1.18.1 | Rowzxr10LdpV6IntfCfgEntry | not-accessible | current | The parameter of a v6 interface entity. |
| 1.3.6.1.4.1.3902.3.314.1.18.1.1 | Columnzxr10LdpV6IntfLdpInstNo | not-accessible | current | The Number of the LDP instance. If the value of this object is 0, then don't exist LDP public instance |
| 1.3.6.1.4.1.3902.3.314.1.18.1.2 | Columnzxr10LdpV6IntfName | not-accessible | current | The name of the interface. |
| 1.3.6.1.4.1.3902.3.314.1.18.1.3 | Columnzxr10LdpV6IntfLblDistributeMode | read-only | current | The distribution mode of the interface. |
| 1.3.6.1.4.1.3902.3.314.1.19 | Tablezxr10LdpGtsmTable | not-accessible | current | Gtsm Table. This table contains one entry per gtsm table. |
| 1.3.6.1.4.1.3902.3.314.1.19.1 | Rowzxr10LdpGtsmEntry | not-accessible | current | The parameter of a gtsm entity. |
| 1.3.6.1.4.1.3902.3.314.1.19.1.1 | Columnzxr10LdpGtsmLdpInstNo | not-accessible | current | The Number of the LDP instance. If the value of this object is 0, then don't exist LDP public instance |
| 1.3.6.1.4.1.3902.3.314.1.19.1.2 | Columnzxr10LdpGtsmPeerLsrId | not-accessible | current | The identifier of peer lsr used to identify a session. |
| 1.3.6.1.4.1.3902.3.314.1.19.1.3 | Columnzxr10LdpGtsmHopCount | read-only | current | The gtsm hop count of the ldp hello. |
| 1.3.6.1.4.1.3902.3.314.1.20 | Tablezxr10LdpPeerBfdTable | not-accessible | current | LDP Peer Bfd Table. This table contains one entry per peer bfd table. |
| 1.3.6.1.4.1.3902.3.314.1.20.1 | Rowzxr10LdpPeerBfdEntry | not-accessible | current | The parameter of a peer bfd entity containing statistics information about a particular peer bfd. |
| 1.3.6.1.4.1.3902.3.314.1.20.1.1 | Columnzxr10LdpPeerBfdLdpInstNo | not-accessible | current | The Number of the LDP instance. If the value of this object is 0, then don't exist LDP public instance |
| 1.3.6.1.4.1.3902.3.314.1.20.1.2 | Columnzxr10LdpPeerBfdRemoteLsrId | not-accessible | current | The identifier of peer lsr used to identify a session. |
| 1.3.6.1.4.1.3902.3.314.1.20.1.3 | Columnzxr10LdpPeerBfdDelay | read-only | current | If the value of this object is 1, then the Ldp Peer Bfd Creat Delay is enable, the default delay time is 60 seconds. IF the value of this object is 2, then the… |
| 1.3.6.1.4.1.3902.3.314.1.20.1.4 | Columnzxr10LdpPeerBfdTime | read-only | current | Set delay time, the prerequisite is the value of zxr10LdpPeerBfdDelay is 1. |
| 1.3.6.1.4.1.3902.3.314.1.21 | Tablezxr10LdpV4DisAutoCfgIntTable | not-accessible | current | Ldp Ipv4 Dis-auto-config Interface Table. This table contains one entry per v4 dis-auto-config interface table. |
| 1.3.6.1.4.1.3902.3.314.1.21.1 | Rowzxr10LdpV4DisAutoCfgIntEntry | not-accessible | current | The parameter of a v4 dis-auto-config interface entity. |
| 1.3.6.1.4.1.3902.3.314.1.21.1.1 | Columnzxr10LdpV4DisACIntfInstNo | not-accessible | current | The Number of the LDP instance. If the value of this object is 0, then don't exist LDP public instance |
| 1.3.6.1.4.1.3902.3.314.1.21.1.2 | Columnzxr10LdpV4DisACIntfName | read-only | current | The name of the dis-auto-config interface. |
| 1.3.6.1.4.1.3902.3.314.1.22 | Tablezxr10LdpV6DisAutoCfgIntTable | not-accessible | current | Ldp IPv6 Dis-auto-config Interface Table. This table contains one entry per V6 dis-auto-config interface table. |
| 1.3.6.1.4.1.3902.3.314.1.22.1 | Rowzxr10LdpV6DisAutoCfgIntEntry | not-accessible | current | The parameter of a V6 dis-auto-config interface entity. |
| 1.3.6.1.4.1.3902.3.314.1.22.1.1 | Columnzxr10LdpV6DisACIntfInstNo | not-accessible | current | The Number of the LDP instance. If the value of this object is 0, then don't exist LDP public instance |
| 1.3.6.1.4.1.3902.3.314.1.22.1.2 | Columnzxr10LdpV6DisACIntfName | read-only | current | The name of the dis-auto-config interface. |
| 1.3.6.1.4.1.3902.3.314.1.23 | Tablezxr10LdpIgpSyncIntTable | not-accessible | current | Ldp Enable Igp Synchronization Interface Table. This table contains one entry per igp sync interface table. |
| 1.3.6.1.4.1.3902.3.314.1.23.1 | Rowzxr10LdpIgpSyncIntEntry | not-accessible | current | The parameter of a igp synchronization interface entity. |
| 1.3.6.1.4.1.3902.3.314.1.23.1.1 | Columnzxr10LdpIgpSyncIntfInstNo | not-accessible | current | The Number of the LDP instance. If the value of this object is 0, then don't exist LDP public instance |
| 1.3.6.1.4.1.3902.3.314.1.23.1.2 | Columnzxr10LdpIgpSyncIntfName | read-only | current | The name of enable igp synchronization interface. |