ZXR10-MPLS-TE-FRR-MIB
74 objects
Copyright (C) 2008 The IETF Trust. This version of this MIB module is part of RFC xxxx; See the RFC itself for full legal notices. This MIB module contains object definitions for MPLS Traffic Engineering facility backup method for Fast Reroute as defined in RFC4090.
Imported Objects
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString |
| ZXR10-SMI | zxr10MplsTeFrr |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3902.3.316.1 | Identityzxr10MplsTeFrrMIB | Copyright (C) 2008 The IETF Trust. This version of this MIB module is part of RFC xxxx; See the RFC itself for full legal notices. This MIB module contains obj… | ||
| 1.3.6.1.4.1.3902.3.316.1.1 | NodemplsFrrGeneralScalars | |||
| 1.3.6.1.4.1.3902.3.316.1.1.2 | ScalarmplsFrrHelloEnabled | read-only | obsolete | Enables or disables hello message in global-configuration mode which is defined in RFC3209. |
| 1.3.6.1.4.1.3902.3.316.1.2 | NodemplsFrrFacilityObjects | |||
| 1.3.6.1.4.1.3902.3.316.1.2.1 | TablemplsFrrFacilityIfTable | not-accessible | current | The mplsFrrFacilityInfTable provides information about the interface as specified by mplsFrrFacilityProtectedIfIndex. Each entry belongs to a protected interfa… |
| 1.3.6.1.4.1.3902.3.316.1.2.1.1 | RowmplsFrrFacilityIfEntry | not-accessible | current | An entry in the mplsFrrFacilityInfTable represents the statistical attributes of a FRR-configured interface. |
| 1.3.6.1.4.1.3902.3.316.1.2.1.1.1 | ColumnmplsFrrFacilityConfigIfIndex | read-only | current | Uniquely identifies the interface configured for FRR protection. If this object is set to 0, this indicates that the remaining indexing combinations for this r… |
| 1.3.6.1.4.1.3902.3.316.1.2.1.1.2 | ColumnmplsFrrFacilityDBNumProtectingTunnelOnIf | read-only | current | The number of backup tunnels protecting the interface specified by mplsFrrFacilityProtectedIfIndex. |
| 1.3.6.1.4.1.3902.3.316.1.2.1.1.3 | ColumnmplsFrrFacilityDBNumProtectedLspOnIf | read-only | current | The number of LSPs currently being protected on the interface specified by mplsFrrFacilityProtectedIfIndex. |
| 1.3.6.1.4.1.3902.3.316.1.2.1.1.4 | ColumnmplsFrrFacilityDBNumProtectedTunnels | read-only | current | The number of tunnels protected on the interface specified by mplsFrrFacilityProtectedIfIndex. |
| 1.3.6.1.4.1.3902.3.316.1.2.1.1.5 | ColumnmplsFrrFacilityProtectingTunnelIndex | read-only | current | Uniquely identifies the mplsTunnelEntry primary index for the tunnel head interface designated to protect the interface as specified in the mplsFrrFacilityProt… |
| 1.3.6.1.4.1.3902.3.316.1.2.1.1.8 | ColumnmplsFrrFacilityConfigIfName | read-only | current | The name of interface configured for FRR protection. |
| 1.3.6.1.4.1.3902.3.316.1.2.2 | TablemplsFrrFacilityDBTable | not-accessible | current | The mplsFrrFacilityDBTable provides summary information about the fast reroute database which indicates information of primary LSPs protected by the LSP as spe… |
| 1.3.6.1.4.1.3902.3.316.1.2.2.1 | RowmplsFrrFacilityDBEntry | not-accessible | current | An entry in the mplsFrrFacilityDBTable represents a single protected LSP, protected by a backup tunnel on a specific protected interface. |
| 1.3.6.1.4.1.3902.3.316.1.2.2.1.1 | ColumnmplsFrrFacilityProtectedIfIndex | read-only | current | Uniquely identifies the interface configured for FRR protection. If this object is set to 0, this indicates that the remaining indexing combinations for this r… |
| 1.3.6.1.4.1.3902.3.316.1.2.2.1.2 | ColumnmplsFrrFacilityPrimaryTunnelIndex | read-only | current | Uniquely identifies the mplsTunnelEntry primary index for the TE tunnel LSP being protected on the interface as specified by mplsFrrFacilityProtectedIfIndex. |
| 1.3.6.1.4.1.3902.3.316.1.2.2.1.3 | ColumnmplsFrrFacilityPrimaryTunnelIngressLSRId | read-only | current | Uniquely identifies the mplsTunnelEntry third index for the TE tunnel LSP being protected on the interface as specified by mplsFrrFacilityProtectedIfIndex. |
| 1.3.6.1.4.1.3902.3.316.1.2.2.1.4 | ColumnmplsFrrFacilityPrimaryTunnelEgressLSRId | read-only | current | Uniquely identifies the mplsTunnelEntry fourth index for the TE tunnel LSP being protected on the interface as specified by mplsFrrFacilityProtectedIfIndex. |
| 1.3.6.1.4.1.3902.3.316.1.2.2.1.5 | ColumnmplsFrrFacilityPrimaryTunnelInstance | read-only | current | Uniquely identifies the mplsTunnelEntry secondary index for the TE tunnel LSP being protected on the interface as specified by mplsFrrFacilityProtectedIfIndex. |
| 1.3.6.1.4.1.3902.3.316.1.2.2.1.6 | ColumnmplsFrrFacilityProtectingTunIdx | read-only | current | Uniquely identifies the mplsTunnelEntry primary index for the tunnel head interface designated to protect the interface as specified in the mplsFrrFacilityProt… |
| 1.3.6.1.4.1.3902.3.316.1.2.2.1.7 | ColumnmplsFrrFacilityProtectedIfName | read-only | current | The name of interface configured for FRR protection. |
| 1.3.6.1.4.1.3902.3.316.1.2.2.1.8 | ColumnmplsFrrFacilityProtectingTunnelStatus | read-only | current | Specifies the state of the protecting tunnel as specified by mplsFrrFacilityProtectingTunnelIndex. active This tunnel's label has been placed in the LFIB and i… |
| 1.3.6.1.4.1.3902.3.316.1.3 | NodemplsFrrHelloObjects | |||
| 1.3.6.1.4.1.3902.3.316.1.3.1 | TablemplsFrrHelloStatusTable | not-accessible | current | The mplsFrrHelloStatusTable provides information about the hello status database. |
| 1.3.6.1.4.1.3902.3.316.1.3.1.1 | RowmplsFrrHelloStatusEntry | not-accessible | current | An entry in the mplsFrrHelloStatusTable represents a single hello enabled interface on local node for timely neighbor failure detection. |
| 1.3.6.1.4.1.3902.3.316.1.3.1.1.1 | ColumnmplsFrrHelloEnabledIfIndex | read-only | current | Uniquely identifies the hello enabled interface on the local node. |
| 1.3.6.1.4.1.3902.3.316.1.3.1.1.2 | ColumnmplsFrrHelloLocalAddress | read-only | current | Uniquely identifies the local address on which hello enabled interfaces are configured for neighbor failure detection. |
| 1.3.6.1.4.1.3902.3.316.1.3.1.1.3 | ColumnmplsFrrHelloNeighborAddress | read-only | current | Uniquely identifies the neighboring address whose status is being tracked. |
| 1.3.6.1.4.1.3902.3.316.1.3.1.1.4 | ColumnmplsFrrHelloNeighborState | read-only | current | Specifies the state of neighbor node as specified by mplsFrrHelloNeighborLSRID. |
| 1.3.6.1.4.1.3902.3.316.1.3.1.1.5 | ColumnmplsFrrHelloType | read-only | current | Indicates the way the hello enabled interface processes hello messages. active(1) : initiate to detect the state of neighbor with hello request message. passiv… |
| 1.3.6.1.4.1.3902.3.316.1.3.1.1.6 | ColumnmplsFrrHelloSrcInstance | read-only | current | Represents the sender's instance. |
| 1.3.6.1.4.1.3902.3.316.1.3.1.1.7 | ColumnmplsFrrHelloDstInstance | read-only | current | The most recently received Src_Instance value as specified by mplsFrrHelloSrcInstance received from the neighbor. This field MUST be set to zero (0) when no va… |
| 1.3.6.1.4.1.3902.3.316.1.3.1.1.8 | ColumnmplsFrrHelloRefreshInterval | read-only | obsolete | Represents the periodicity in which hello message is issued. |
| 1.3.6.1.4.1.3902.3.316.1.3.1.1.9 | ColumnmplsFrrHelloNumRefreshMisses | read-only | obsolete | Represents the allowed max miss number of hello instances after which the node treat the neighbor communication has been lost. |
| 1.3.6.1.4.1.3902.3.316.1.3.1.1.10 | ColumnmplsFrrHelloNumLosses | read-only | current | Represents the lost count of hello instances. |
| 1.3.6.1.4.1.3902.3.316.1.3.1.1.11 | ColumnmplsFrrHelloNumProtectedLsps | read-only | current | Represents the number of protected LSPs. |
| 1.3.6.1.4.1.3902.3.316.1.3.1.1.12 | ColumnmplsFrrHelloEnabledIfName | read-only | current | Hello enabled interface name. |
| 1.3.6.1.4.1.3902.3.316.1.3.2 | TablemplsFrrHelloConfigTable | not-accessible | obsolete | The mplsFrrHelloConfigTable provides information about the hello configuration info on interfaces. |
| 1.3.6.1.4.1.3902.3.316.1.3.2.1 | RowmplsFrrHelloConfigEntry | not-accessible | obsolete | An entry in the mplsFrrHelloConfigTable represents a single hello configuration info of hello enabled interface. |
| 1.3.6.1.4.1.3902.3.316.1.3.2.1.1 | ColumnmplsFrrHelloConfigIfIndex | read-only | obsolete | The index of interface which enables FRR hello. |
| 1.3.6.1.4.1.3902.3.316.1.3.2.1.2 | ColumnmplsFrrHelloConfigRefreshInterval | read-only | obsolete | FRR Hello refresh interval on this interface. |
| 1.3.6.1.4.1.3902.3.316.1.3.2.1.3 | ColumnmplsFrrHelloConfigRefreshMisses | read-only | obsolete | FRR Hello refresh misses on this interface. |
| 1.3.6.1.4.1.3902.3.316.1.3.2.1.4 | ColumnmplsFrrHelloConfigIfName | read-only | obsolete | The name of interface which enables FRR hello. |
| 1.3.6.1.4.1.3902.3.316.1.4 | NodemplsFrrDetourObjects | |||
| 1.3.6.1.4.1.3902.3.316.1.4.1 | TablemplsFrrDetourDBTable | not-accessible | current | The mplsFrrDetourDBTable provides summary information about the fast reroute database which indicates information of tunnels protected by detour LSP. The entri… |
| 1.3.6.1.4.1.3902.3.316.1.4.1.1 | RowmplsFrrDetourDBEntry | not-accessible | current | An entry in the mplsFrrDetourDBEntry represents a single protected LSP, protected by a detour lsp. |
| 1.3.6.1.4.1.3902.3.316.1.4.1.1.1 | ColumnmplsFrrDetourTunnelIndex | read-only | current | Uniquely identifies the mplsTunnelEntry index for the TE tunnel LSP being protected by detour Lsp with the same tunnel index. |
| 1.3.6.1.4.1.3902.3.316.1.4.1.1.2 | ColumnmplsFrrDetourTunnelInstance | read-only | current | Uniquely identifies the mplsTunnelEntry secondary index for the TE tunnel LSP being protected by detour Lsp with the same tunnel instance. |
| 1.3.6.1.4.1.3902.3.316.1.4.1.1.3 | ColumnmplsFrrDetourTunnelIngressLSRId | read-only | current | Uniquely identifies the mplsTunnelEntry third index for the TE tunnel LSP being protected by detour Lsp. |
| 1.3.6.1.4.1.3902.3.316.1.4.1.1.4 | ColumnmplsFrrDetourTunnelEgressLSRId | read-only | current | Uniquely identifies the mplsTunnelEntry fourth index for the TE tunnel LSP being protected by detour Lsp. |
| 1.3.6.1.4.1.3902.3.316.1.4.1.1.5 | ColumnmplsFrrDetourPrimaryLspInIntf | read-only | current | Indicates the index of in interface of primary lsp on this node. |
| 1.3.6.1.4.1.3902.3.316.1.4.1.1.6 | ColumnmplsFrrDetourPrimaryLspInLable | read-only | current | Indicates the in lable of primary lsp on this node. |
| 1.3.6.1.4.1.3902.3.316.1.4.1.1.7 | ColumnmplsFrrDetourPrimaryLspOutIntf | read-only | current | Indicates the index of out interface of primary lsp on this node. |
| 1.3.6.1.4.1.3902.3.316.1.4.1.1.8 | ColumnmplsFrrDetourPrimaryLspOutLable | read-only | current | Indicates the out lable of primary lsp on this node. |
| 1.3.6.1.4.1.3902.3.316.1.4.1.1.9 | ColumnmplsFrrDetourBackupLspInLable | read-only | current | Indicates the in lable of detour lsp on this node. |
| 1.3.6.1.4.1.3902.3.316.1.4.1.1.10 | ColumnmplsFrrDetourBackupLspInIntf | read-only | current | Indicates the index of in interface of detour lsp on this node. |
| 1.3.6.1.4.1.3902.3.316.1.4.1.1.11 | ColumnmplsFrrDetourBackupLspOutLable | read-only | current | Indicates the out lable of detour lsp on this node. |
| 1.3.6.1.4.1.3902.3.316.1.4.1.1.12 | ColumnmplsFrrDetourBackupLspOutIntf | read-only | current | Indicates the index of out interface of detour lsp on this node. |
| 1.3.6.1.4.1.3902.3.316.1.4.1.1.13 | ColumnmplsFrrDetourBackupLspNextHop | read-only | current | Indicates the next hop address of detour Lsp . |
| 1.3.6.1.4.1.3902.3.316.1.4.1.1.14 | ColumnmplsFrrDetourProtectingLspStatus | read-only | current | Specifies the state of the detour lsp. active This lsp's label has been placed in the LFIB and is ready to be applied to incoming packets. ready - This lsp's l… |
| 1.3.6.1.4.1.3902.3.316.1.4.1.1.15 | ColumnmplsFrrDetourProtecttype | read-only | current | This object indicates the protection type provided by detour lsp. node The detour lsp is NNHop protection. link The detour lsp id NHop protection. |
| 1.3.6.1.4.1.3902.3.316.1.4.2 | TablemplsFrrDetourLspTable | not-accessible | current | The mplsFrrDetourLspTable provides summary information about the detour LSP. The entries of this table are present in all LSRs on the path of the detour LSP. |
| 1.3.6.1.4.1.3902.3.316.1.4.2.1 | RowmplsFrrDetourLspEntry | not-accessible | current | An entry in this table represents a detour. An entry in this table is only created by an SNMP agent as instructed by an MPLS signaling protocol. |
| 1.3.6.1.4.1.3902.3.316.1.4.2.1.1 | ColumnmplsFrrDetourLspIndex | read-only | current | Uniquely identifies the mplsTunnelEntry index for the detour Lsp which is the same as th TE tunnel LSP being protected. |
| 1.3.6.1.4.1.3902.3.316.1.4.2.1.2 | ColumnmplsFrrDetourLspInstance | read-only | current | Uniquely identifies the mplsTunnelEntry secondary index for the detour Lsp which is the same as th TE tunnel LSP being protected. |
| 1.3.6.1.4.1.3902.3.316.1.4.2.1.3 | ColumnmplsFrrDetourLspIngressLSRId | read-only | current | Uniquely identifies the mplsTunnelEntry third index for the detour Lsp which is the same as th TE tunnel LSP being protected. |
| 1.3.6.1.4.1.3902.3.316.1.4.2.1.4 | ColumnmplsFrrDetourLspEgressLSRId | read-only | current | Uniquely identifies the mplsTunnelEntry fourth index for the detour Lsp which is the same as th TE tunnel LSP being protected. |
| 1.3.6.1.4.1.3902.3.316.1.4.2.1.5 | ColumnmplsFrrDetourLspInInterface | read-only | current | Indicates the index of in interface of the detour lsp on this node. |
| 1.3.6.1.4.1.3902.3.316.1.4.2.1.6 | ColumnmplsFrrDetourLspOutInterface | read-only | current | Indicates the index of out interface of the detour lsp on this node. |
| 1.3.6.1.4.1.3902.3.316.1.4.2.1.7 | ColumnmplsFrrDetourLspType | read-only | current | This object indicates the lsp type. plrlsp The detour lsp originated from this node. dtrLsp The detour lsp through this node. |
| 1.3.6.1.4.1.3902.3.316.1.4.2.1.8 | ColumnmplsFrrDetourMergeType | read-only | current | This value represents whether or not this detour is merged. notmerged This detour is not merged. mergedwithdtr-lsp This detour is merged into another detour pr… |
| 1.3.6.1.4.1.3902.3.316.1.4.2.1.9 | ColumnmplsFrrDetourLspPLRLSRId | read-only | current | The IP address of the PLR which has initiated the detour LSP. |
| 1.3.6.1.4.1.3902.3.316.1.4.2.1.10 | ColumnmplsFrrDetourLspAviodLSRId | read-only | current | The IP address of the node that this PLR tries to avoid. |
| 1.3.6.1.4.1.3902.3.316.1.4.2.1.11 | ColumnmplsFrrDetourLspBandwidth | read-only | current | The maximum bandwidth specifically reserved for the detour LSP, in units of thousands of bits per second (Kbps). |