ZXR10-MPLS-TE-MIB
248 objects
Copyright (C) The Internet Society (2004). The initial version of this MIB module was published in RFC 3812. For full legal notices see the RFC itself or see: http://www.ietf.org/copyrights/ianamib.html This MIB module contains managed object definitions for MPLS Traffic Engineering (TE) as defined in: 1. Extensions to RSVP for LSP Tunnels, Awduche et al, RFC 3209, December 20012. Constraint-Based LSP Setup using LDP, Jamoussi (Editor), RFC 3212, January 2002 3. Requirements for Traffic Engineering Over MPLS, Awduche, D., Malcolm, J., Agogbua, J., O Dell, M., and J. McManus, [RFC2702], September 1999
Imported Objects
| SNMPv2-SMI | Counter32 Counter64 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus StorageType TimeStamp |
| ZXR10-SMI | zxr10MplsTe |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3902.3.315.1 | Identityzxr10MplsTeMIB | Copyright (C) The Internet Society (2004). The initial version of this MIB module was published in RFC 3812. For full legal notices see the RFC itself or see: … | ||
| 1.3.6.1.4.1.3902.3.315.1.0 | Nodezxr10MplsTeNotifications | |||
| 1.3.6.1.4.1.3902.3.315.1.0.1 | Notificationzxr10MplsTunnelUp | current | This notification is generated when a zxr10MplsTunnelOperStatus object for one of the configured tunnels is about to leave the down state and transition into u… | |
| 1.3.6.1.4.1.3902.3.315.1.0.2 | Notificationzxr10MplsTunnelDown | current | This notification is generated when a zxr10MplsTunnelOperStatus object for one of the configured tunnels is about to leave the up state and transition into dow… | |
| 1.3.6.1.4.1.3902.3.315.1.0.3 | Notificationzxr10MplsLspUp | current | This notification is generated when a zxr10MplsTunnelOperStatus object for one of the LSPs is about to leave the down state and transition into up state. | |
| 1.3.6.1.4.1.3902.3.315.1.0.4 | Notificationzxr10MplsLspDown | current | This notification is generated when a zxr10MplsTunnelOperStatus object for one of the LSPs is about to leave the up state and transition into down state. | |
| 1.3.6.1.4.1.3902.3.315.1.0.5 | Notificationzxr10MplsLspChange | current | This notification is generated when a tunnel is MBB. | |
| 1.3.6.1.4.1.3902.3.315.1.0.6 | Notificationzxr10MplsTunnelUpcallNetmng | current | This notification is generated when tunnel state changed, for example tunnel hotstandby bind or delete,tunnel creat successs, tunnel config success or fail... | |
| 1.3.6.1.4.1.3902.3.315.1.1 | Nodezxr10MplsTeScalars | |||
| 1.3.6.1.4.1.3902.3.315.1.1.1 | Scalarzxr10MplsTunnelEnable | read-only | obsolete | If this object is true, then it enables the zxr10MplsTunnel. |
| 1.3.6.1.4.1.3902.3.315.1.1.2 | Scalarzxr10MplsTunnelConfiguredNum | read-only | current | The number of tunnels configured on this device. A tunnel is considered configured if the zxr10MplsTunnelRowStatus is active(1). |
| 1.3.6.1.4.1.3902.3.315.1.1.3 | Scalarzxr10MplsTunnelTEDistProto | read-only | current | The traffic engineering distribution protocol(s) used by this LSR. Note that an LSR may support more than one distribution protocol simultaneously. |
| 1.3.6.1.4.1.3902.3.315.1.1.4 | Scalarzxr10MplsTunnelImplicitNullEnable | read-only | obsolete | If this object is true, then it enables the ImplicitNull. |
| 1.3.6.1.4.1.3902.3.315.1.1.5 | Scalarzxr10MplsTunnelGrEnable | read-only | obsolete | If this object is true, then it enables the GR. |
| 1.3.6.1.4.1.3902.3.315.1.1.6 | Scalarzxr10MplsTunnelGrRefreshInterval | read-only | obsolete | Graceful-restart interval time 10~30000. |
| 1.3.6.1.4.1.3902.3.315.1.1.7 | Scalarzxr10MplsTunnelGrRefreshMisses | read-only | obsolete | Graceful-restart miss number 4~10. |
| 1.3.6.1.4.1.3902.3.315.1.1.8 | Scalarzxr10MplsTunnelGrRecoveryTime | read-only | obsolete | Graceful-restart RecoveryTime 0~300000. |
| 1.3.6.1.4.1.3902.3.315.1.1.9 | Scalarzxr10MplsTunnelGrRestartTime | read-only | obsolete | Graceful-restart time 0~300000. |
| 1.3.6.1.4.1.3902.3.315.1.1.10 | Scalarzxr10MplsTunnelSignallingRefreshInterval | read-only | obsolete | RefreshInterval 5000~65535000 |
| 1.3.6.1.4.1.3902.3.315.1.1.11 | Scalarzxr10MplsTunnelSignallingRefreshMisses | read-only | obsolete | SignallingRefreshMisses 2~10 |
| 1.3.6.1.4.1.3902.3.315.1.1.12 | Scalarzxr10MplsVersion | read-only | current | MPLS version number. |
| 1.3.6.1.4.1.3902.3.315.1.1.13 | Scalarzxr10MplsActiveLsps | read-only | current | Number of active LSPs. |
| 1.3.6.1.4.1.3902.3.315.1.1.16 | Scalarzxr10MplsAutobakTunnelMinID | read-only | obsolete | The Min tunnelID can be used by Auto baktunnel. |
| 1.3.6.1.4.1.3902.3.315.1.1.17 | Scalarzxr10MplsAutobakTunnelMaxID | read-only | obsolete | The Max tunnelID can be used by Auto baktunnel. |
| 1.3.6.1.4.1.3902.3.315.1.1.18 | Scalarzxr10MplsRouterID | read-only | obsolete | TE_Routerid with interface name. |
| 1.3.6.1.4.1.3902.3.315.1.2 | Nodezxr10MplsTeTunnelObjects | |||
| 1.3.6.1.4.1.3902.3.315.1.2.1 | Tablezxr10MplsTunnelTable | not-accessible | current | The mplsTunnelTable allows new MPLS tunnels to be created between an LSR and a remote endpoint, and existing tunnels to be reconfigured or removed. Note that o… |
| 1.3.6.1.4.1.3902.3.315.1.2.1.1 | Rowzxr10MplsTunnelEntry | not-accessible | current | An entry in this table represents an MPLS tunnel. An entry can be created by a network administrator or by an SNMP agent as instructed by an MPLS signalling pr… |
| 1.3.6.1.4.1.3902.3.315.1.2.1.1.1 | Columnzxr10MplsTunnelIndex | read-only | current | Uniquely identifies a set of tunnel instances between a pair of ingress and egress LSRs. Managers should obtain new values for row creation in this table by re… |
| 1.3.6.1.4.1.3902.3.315.1.2.1.1.2 | Columnzxr10MplsTunnelInstance | read-only | current | Uniquely identifies a particular instance of a tunnel between a pair of ingress and egress LSRs. It is useful to identify multiple instances of tunnels for the… |
| 1.3.6.1.4.1.3902.3.315.1.2.1.1.3 | Columnzxr10MplsTunnelIngressLSRId | read-only | current | Identity of the ingress LSR associated with this tunnel instance. When the MPLS signalling protocol is rsvp(2) this value SHOULD be equal to the Tunnel Sender … |
| 1.3.6.1.4.1.3902.3.315.1.2.1.1.4 | Columnzxr10MplsTunnelEgressLSRId | read-only | current | Identity of the egress LSR associated with this tunnel instance. |
| 1.3.6.1.4.1.3902.3.315.1.2.1.1.5 | Columnzxr10MplsTunnelOutLabel | read-only | current | Out label of local tunnel. |
| 1.3.6.1.4.1.3902.3.315.1.2.1.1.6 | Columnzxr10MplsTunnelOutIntf | read-only | current | The name of out interface that local tunnel transits. |
| 1.3.6.1.4.1.3902.3.315.1.2.1.1.7 | Columnzxr10MplsTunnelName | read-only | current | The canonical name assigned to the tunnel. This name can be used to refer to the tunnel on the LSR's console port. If zxr10MplsTunnelIsIf is set to true then t… |
| 1.3.6.1.4.1.3902.3.315.1.2.1.1.8 | Columnzxr10MplsTunnelDescr | read-only | current | A textual string containing information about the tunnel. If there is no description this object contains a zero length string. This object is may not be signa… |
| 1.3.6.1.4.1.3902.3.315.1.2.1.1.9 | Columnzxr10MplsTunnelIsIf | read-only | obsolete | Denotes whether or not this tunnel corresponds to an interface represented in the interfaces group table. Note that if this variable is set to true then the if… |
| 1.3.6.1.4.1.3902.3.315.1.2.1.1.10 | Columnzxr10MplsTunnelIfIndex | read-only | current | If zxr10MplsTunnelIsIf is set to true, then this value contains the LSR-assigned ifIndex which corresponds to an entry in the interfaces table. Otherwise this … |
| 1.3.6.1.4.1.3902.3.315.1.2.1.1.11 | Columnzxr10MplsTunnelIfType | read-only | current | Type of tunnel interface. |
| 1.3.6.1.4.1.3902.3.315.1.2.1.1.12 | Columnzxr10MplsTunnelIfAddrOrName | read-only | current | Ip address or loopback name of tunnel interface. |
| 1.3.6.1.4.1.3902.3.315.1.2.1.1.13 | Columnzxr10MplsTunnelIfMaskOrIndex | read-only | current | Subnet mask or loopback interface index of tunnel interface |
| 1.3.6.1.4.1.3902.3.315.1.2.1.1.14 | Columnzxr10MplsTunnelOwner | read-only | current | Denotes the entity that created and is responsible for managing this tunnel. This column isau tomatically filled by the agent on creation of a ow. |
| 1.3.6.1.4.1.3902.3.315.1.2.1.1.15 | Columnzxr10MplsTunnelRole | read-only | current | This value signifies the role that this tunnel entry/instance represents. This value MUST be set to head(1) at the originating point of the tunnel. This value … |
| 1.3.6.1.4.1.3902.3.315.1.2.1.1.16 | Columnzxr10MplsTunnelSignallingProto | read-only | current | The signalling protocol, if any, used to setup this tunnel. |
| 1.3.6.1.4.1.3902.3.315.1.2.1.1.17 | Columnzxr10MplsTunnelSetupPrio | read-only | current | Indicates the setup priority of this tunnel. |
| 1.3.6.1.4.1.3902.3.315.1.2.1.1.18 | Columnzxr10MplsTunnelHoldingPrio | read-only | current | Indicates the holding priority for this tunnel. |
| 1.3.6.1.4.1.3902.3.315.1.2.1.1.19 | Columnzxr10MplsTunnelSessionAttributes | read-only | current | This bit mask indicates optional session values for this tunnel. |
| 1.3.6.1.4.1.3902.3.315.1.2.1.1.20 | Columnzxr10MplsTunnelFrrEnable | read-only | obsolete | If this tunnel enables FRR,this value is true,otherwise it is false. |
| 1.3.6.1.4.1.3902.3.315.1.2.1.1.21 | Columnzxr10MplsTunnelResourcePointer | read-only | current | This variable represents a pointer to the traffic parameter specification for this tunnel. This value may point at an entry in the zxr10MplsTunnelResourceEntry… |
| 1.3.6.1.4.1.3902.3.315.1.2.1.1.22 | Columnzxr10MplsTunnelPrimaryInstance | read-only | current | Specifies the instance index of the primary instance of this tunnel. More details of the definition of tunnel instances and the primary tunnel instance can be … |
| 1.3.6.1.4.1.3902.3.315.1.2.1.1.23 | Columnzxr10MplsTunnelInstancePriority | read-only | current | This value indicates which priority, in descending order, with 0 indicating the lowest priority, within a group of tunnel instances. A group of tunnel instance… |
| 1.3.6.1.4.1.3902.3.315.1.2.1.1.24 | Columnzxr10MplsTunnelHopTableIndex | read-only | current | Index into the zxr10MplsTunnelHopTable entry that specifies the explicit route hops for this tunnel. This object is meaningful only at the head-end of the tunn… |
| 1.3.6.1.4.1.3902.3.315.1.2.1.1.25 | Columnzxr10MplsTunnelPathInUse | read-only | current | This value denotes the configured path that was chosen for this tunnel. This value reflects the secondary index into zxr10MplsTunnelHopTable. This path may not… |
| 1.3.6.1.4.1.3902.3.315.1.2.1.1.26 | Columnzxr10MplsTunnelARHopTableIndex | read-only | current | Index into the zxr10MplsTunnelARHopTable entry that specifies the actual hops traversed by the tunnel. This is automatically updated by the agent when the actu… |
| 1.3.6.1.4.1.3902.3.315.1.2.1.1.27 | Columnzxr10MplsTunnelCHopTableIndex | read-only | current | Index into the zxr10MplsTunnelCHopTable entry that specifies the computed hops traversed by the tunnel. This is automatically updated by the agent when compute… |
| 1.3.6.1.4.1.3902.3.315.1.2.1.1.28 | Columnzxr10MplsTunnelTotalUpTime | read-only | current | This value represents the aggregate up time for all instances of this tunnel, if available. If this value is unavailable, it MUST return a value of 0. |
| 1.3.6.1.4.1.3902.3.315.1.2.1.1.29 | Columnzxr10MplsTunnelInstanceUpTime | read-only | current | This value identifies the total time that this tunnel instance's operStatus has been Up(1). |
| 1.3.6.1.4.1.3902.3.315.1.2.1.1.30 | Columnzxr10MplsTunnelPrimaryUpTime | read-only | current | Specifies the total time the primary instance of this tunnel has been active. The primary instance of this tunnel is defined in zxr10MplsTunnelPrimaryInstance. |
| 1.3.6.1.4.1.3902.3.315.1.2.1.1.31 | Columnzxr10MplsTunnelPathChanges | read-only | current | Specifies the number of times the actual path for this tunnel instance has changed. |
| 1.3.6.1.4.1.3902.3.315.1.2.1.1.32 | Columnzxr10MplsTunnelLastPathChange | read-only | current | Specifies the time since the last change to the actual path for this tunnel instance. |
| 1.3.6.1.4.1.3902.3.315.1.2.1.1.33 | Columnzxr10MplsTunnelCreationTime | read-only | current | Specifies the value of SysUpTime when the first instance of this tunnel came into existence. That is, when the value of zxr10MplsTunnelOperStatus was first set… |
| 1.3.6.1.4.1.3902.3.315.1.2.1.1.34 | Columnzxr10MplsTunnelStateTransitions | read-only | current | Specifies the number of times the state (zxr10MplsTunnelOperStatus) of this tunnel instance has changed. |
| 1.3.6.1.4.1.3902.3.315.1.2.1.1.35 | Columnzxr10MplsTunnelAdminStatus | read-only | current | Indicates the desired operational status of this tunnel. |
| 1.3.6.1.4.1.3902.3.315.1.2.1.1.36 | Columnzxr10MplsTunnelOperStatus | read-only | current | Indicates the actual operational status of this tunnel, which is typically but not limited to, a function of the state of individual segments of this tunnel. |
| 1.3.6.1.4.1.3902.3.315.1.2.1.1.37 | Columnzxr10MplsTunnelRowStatus | read-only | current | This variable is used to create, modify, and/or delete a row in this table. When a row in this table is in active(1) state, no objects in that row can be modif… |
| 1.3.6.1.4.1.3902.3.315.1.2.1.1.38 | Columnzxr10MplsTunnelStorageType | read-only | current | The storage type for this tunnel entry. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. |
| 1.3.6.1.4.1.3902.3.315.1.2.1.1.39 | Columnzxr10MplsTunnelAutorouteEnable | read-only | obsolete | If this object is true, then it enables the Autoroute. |
| 1.3.6.1.4.1.3902.3.315.1.2.1.1.40 | Columnzxr10MplsTunnelAutorouteMetricType | read-only | obsolete | Indicates the autoroute metric type over this tunnel. |
| 1.3.6.1.4.1.3902.3.315.1.2.1.1.41 | Columnzxr10MplsTunnelAutorouteMetricRelativeValue | read-only | obsolete | Indicates the value that adjust metric for autoroutes relative to IGP. |
| 1.3.6.1.4.1.3902.3.315.1.2.1.1.42 | Columnzxr10MplsTunnelAutorouteMetricAbsoluteValue | read-only | obsolete | Indicates the value for all autoroutes over tunnel. |
| 1.3.6.1.4.1.3902.3.315.1.2.1.1.43 | Columnzxr10MplsTunnelRecordRouteEnable | read-only | obsolete | If this object is true, then it enables the RecordRoute |
| 1.3.6.1.4.1.3902.3.315.1.2.1.1.44 | Columnzxr10MplsTunnelCACStatus | read-only | current | CAC switch status |
| 1.3.6.1.4.1.3902.3.315.1.2.1.1.45 | Columnzxr10MplsTunnelLspOctets | read-only | current | The number of octets that have been forwarded over current LSP active path. The number reported is not realtime, may subject to several minutes delay. The dela… |
| 1.3.6.1.4.1.3902.3.315.1.2.1.1.46 | Columnzxr10MplsTunnelLspPackets | read-only | current | The number of packets that have been forwarded over current LSP active path. The number reported is not realtime, may subject to several minutes delay. The del… |
| 1.3.6.1.4.1.3902.3.315.1.2.1.1.47 | Columnzxr10MplsTunnelLspLastTransition | read-only | current | The time in 10-millisecond units since the last transition occurred on this LSP. |
| 1.3.6.1.4.1.3902.3.315.1.2.1.1.48 | Columnzxr10MplsTunnelLspConfiguredPaths | read-only | current | The number of paths configured for this LSP. |
| 1.3.6.1.4.1.3902.3.315.1.2.1.1.49 | Columnzxr10MplsTunnelPathType | read-only | current | The type of path that is active, i.e., a primary path, a standby path, or a generic secondary path. This field is meaningless unless mplsPathName is not empty |
| 1.3.6.1.4.1.3902.3.315.1.2.1.1.50 | Columnzxr10MplsTunnelPathExplicitRoute | read-only | current | The explicit route used to set up this LSP. This may either be the route configured by the user, or a route automatically computed to satisfy constraints set b… |
| 1.3.6.1.4.1.3902.3.315.1.2.1.1.51 | Columnzxr10MplsTunnelPathRecordRoute | read-only | current | The route actually used for this path, as recorded by the signaling protocol. This field is a displayable string in the format of XXX.XXX.XXX.XXX <space> repea… |
| 1.3.6.1.4.1.3902.3.315.1.2.1.1.52 | Columnzxr10MplsTunnelPathCOS | read-only | current | The configured Class Of Service on this path. If the value is between 0 and 7 inclusive, this value will be inserted in the 3 bit COS field in the label. If th… |
| 1.3.6.1.4.1.3902.3.315.1.2.1.1.53 | Columnzxr10MplsTunnelPathInclude | read-only | current | This is a configured set of colors (administrative groups) specified as a bit vector (i.e., bit n is 1 if color n is in the set, where n = 0 is the LSB). For e… |
| 1.3.6.1.4.1.3902.3.315.1.2.1.1.54 | Columnzxr10MplsTunnelPathExclude | read-only | current | This is a configured set of colors (administrative groups) specified as a bit vector (i.e., bit n is 1 if color n is in the set, where n = 0 is the LSB). For e… |
| 1.3.6.1.4.1.3902.3.315.1.2.1.1.55 | Columnzxr10MplsTunnelHotStandbyEnable | read-only | obsolete | If this object is true, then it enables hotstandby. |
| 1.3.6.1.4.1.3902.3.315.1.2.1.1.56 | Columnzxr10MplsTunnelHotStandbyPrimaryPathOption | read-only | obsolete | Specifies the pathOption of protected LSP. |
| 1.3.6.1.4.1.3902.3.315.1.2.1.1.57 | Columnzxr10MplsTunnelHotStandbySecondaryPathOption | read-only | obsolete | Specifies the pathOption of hotstandby LSP. |
| 1.3.6.1.4.1.3902.3.315.1.2.1.1.58 | Columnzxr10MplsTunnelHotStandbyInstance | read-only | current | Uniquely identifies the tunnel instance of hotstandby lsp. |
| 1.3.6.1.4.1.3902.3.315.1.2.1.1.59 | Columnzxr10MplsTunnelHotStandbyState | read-only | current | Specifies the hotstandby state of the tunnel. |
| 1.3.6.1.4.1.3902.3.315.1.2.1.1.60 | Columnzxr10MplsTunnelBfdEnable | read-only | obsolete | If this object is true, then it enables bfd on the tunnel. |
| 1.3.6.1.4.1.3902.3.315.1.2.1.1.61 | Columnzxr10MplsTunnelBFDmult | read-only | obsolete | The detecting multiple of receive/send CONTROL message. |
| 1.3.6.1.4.1.3902.3.315.1.2.1.1.62 | Columnzxr10MplsTunnelBFDminTxInterval | read-only | obsolete | The minimal time to send CONTROL message. |
| 1.3.6.1.4.1.3902.3.315.1.2.1.1.63 | Columnzxr10MplsTunnelBFDminRxInterval | read-only | obsolete | The minimal time to receive CONTROL message. |
| 1.3.6.1.4.1.3902.3.315.1.2.1.1.64 | Columnzxr10MplsTunnelBFDstatus | read-only | current | The status of bfd. |
| 1.3.6.1.4.1.3902.3.315.1.2.1.1.65 | Columnzxr10MplsTunnelFrrProtectionMethod | read-only | obsolete | Indicates which protection method is used for fast reroute on this device. unknown(0) indicates no FRR protection exists. facilityBackup(1) indicates bypass pr… |
| 1.3.6.1.4.1.3902.3.315.1.2.1.1.66 | Columnzxr10MplsTunnelBandwidth | read-only | current | Specifies the bandwidth of the tunnel. |
| 1.3.6.1.4.1.3902.3.315.1.2.1.1.67 | Columnzxr10MplsTunnelSubPoolBandwidth | read-only | current | Specifies the sub pool bandwidth of the tunnel. |
| 1.3.6.1.4.1.3902.3.315.1.2.1.1.68 | Columnzxr10MplsTunnelIgpMetric | read-only | current | The value of igp metric is used for build tunnel. |
| 1.3.6.1.4.1.3902.3.315.1.2.1.1.69 | Columnzxr10MplsTunnelTeMetric | read-only | current | The value of te metric is used for build tunnel. |
| 1.3.6.1.4.1.3902.3.315.1.2.1.1.70 | Columnzxr10MplsTunnelBFDSlaveStatus | read-only | current | The status of slave lsp bfd. |
| 1.3.6.1.4.1.3902.3.315.1.2.1.1.71 | Columnzxr10MplsTunnelAssociateStatus | read-only | current | The associate bidirect status of this tunnel. |
| 1.3.6.1.4.1.3902.3.315.1.3 | Nodezxr10MplsTeRemoteTunnelObjects | |||
| 1.3.6.1.4.1.3902.3.315.1.3.1 | Tablezxr10MplsRemoteTunnelTable | not-accessible | current | The Mpls Remote Tunnel Table |
| 1.3.6.1.4.1.3902.3.315.1.3.1.1 | Rowzxr10MplsRemoteTunnelEntry | not-accessible | current | An entry in this table represents an MPLS remote tunnel. |
| 1.3.6.1.4.1.3902.3.315.1.3.1.1.1 | Columnzxr10MplsRemoteTunnelIndex | read-only | current | Uniquely identifies a set of tunnel instances between a pair of ingress and egress LSRs. |
| 1.3.6.1.4.1.3902.3.315.1.3.1.1.2 | Columnzxr10MplsRemoteTunnelInstance | read-only | current | Uniquely identifies a particular instance of a tunnel between a pair of ingress and egress LSRs. It is useful to identify multiple instances of tunnels for the… |
| 1.3.6.1.4.1.3902.3.315.1.3.1.1.3 | Columnzxr10MplsRemoteTunnelIngressLSRId | read-only | current | Identity of the ingress LSR associated with this tunnel instance. |
| 1.3.6.1.4.1.3902.3.315.1.3.1.1.4 | Columnzxr10MplsRemoteTunnelEgressLSRId | read-only | current | Identity of the egress LSR associated with this tunnel instance. |
| 1.3.6.1.4.1.3902.3.315.1.3.1.1.5 | Columnzxr10MplsRemoteTunnelInLabel | read-only | current | In label of Remote tunnel. |
| 1.3.6.1.4.1.3902.3.315.1.3.1.1.6 | Columnzxr10MplsRemoteTunnelOutLabel | read-only | current | Out label of Remote tunnel. |
| 1.3.6.1.4.1.3902.3.315.1.3.1.1.7 | Columnzxr10MplsRemoteTunnelInIntf | read-only | current | The name of in interface that remote tunnel transits. |
| 1.3.6.1.4.1.3902.3.315.1.3.1.1.8 | Columnzxr10MplsRemoteTunnelOutIntf | read-only | current | The name of out interface that remote tunnel transits. |
| 1.3.6.1.4.1.3902.3.315.1.3.1.1.9 | Columnzxr10MplsRemoteTunnelName | read-only | current | The canonical name assigned to the tunnel. This name can be used to refer to the tunnel on the LSR's console port. If zxr10MplsRemoteTunnelIsIf is set to true … |
| 1.3.6.1.4.1.3902.3.315.1.3.1.1.11 | Columnzxr10MplsRemoteTunnelIsIf | read-only | current | Denotes whether or not this tunnel corresponds to an interface represented in the interfaces group table. Note that if this variable is set to true then the if… |
| 1.3.6.1.4.1.3902.3.315.1.3.1.1.12 | Columnzxr10MplsRemoteTunnelOwner | read-only | current | Denotes the entity that created and is responsible for managing this tunnel. This column isau tomatically filled by the agent on creation of a ow. |
| 1.3.6.1.4.1.3902.3.315.1.3.1.1.13 | Columnzxr10MplsRemoteTunnelRole | read-only | current | This value signifies the role that this tunnel entry/instance represents. This value MUST be set to head(1) at the originating point of the tunnel. This value … |
| 1.3.6.1.4.1.3902.3.315.1.3.1.1.14 | Columnzxr10MplsRemoteTunnelSignallingProto | read-only | current | The signalling protocol, if any, used to setup this tunnel. |
| 1.3.6.1.4.1.3902.3.315.1.3.1.1.15 | Columnzxr10MplsRemoteTunnelSetupPrio | read-only | current | Indicates the setup priority of this tunnel. |
| 1.3.6.1.4.1.3902.3.315.1.3.1.1.16 | Columnzxr10MplsRemoteTunnelHoldingPrio | read-only | current | Indicates the holding priority for this tunnel. |
| 1.3.6.1.4.1.3902.3.315.1.3.1.1.17 | Columnzxr10MplsRemoteTunnelSessionAttributes | read-only | current | This bit mask indicates optional session values for this tunnel. |
| 1.3.6.1.4.1.3902.3.315.1.3.1.1.18 | Columnzxr10MplsRemoteTunnelLocalProtectInUse | read-only | current | Indicates that the local repair mechanism is in use to maintain this tunnel (usually in the face of an outage of the link it was previously routed over). |
| 1.3.6.1.4.1.3902.3.315.1.3.1.1.19 | Columnzxr10MplsRemoteTunnelPrimaryInstance | read-only | current | Specifies the instance index of the primary instance of this tunnel. More details of the definition of tunnel instances and the primary tunnel instance can be … |
| 1.3.6.1.4.1.3902.3.315.1.3.1.1.20 | Columnzxr10MplsRemoteTunnelInstancePriority | read-only | current | This value indicates which priority, in descending order, with 0 indicating the lowest priority, within a group of tunnel instances. A group of tunnel instance… |
| 1.3.6.1.4.1.3902.3.315.1.3.1.1.21 | Columnzxr10MplsRemoteTunnelTotalUpTime | read-only | current | This value represents the aggregate up time for all instances of this tunnel, if available. If this value is unavailable, it MUST return a value of 0. |
| 1.3.6.1.4.1.3902.3.315.1.3.1.1.22 | Columnzxr10MplsRemoteTunnelInstanceUpTime | read-only | current | This value identifies the total time that this tunnel instance's operStatus has been Up(1). |
| 1.3.6.1.4.1.3902.3.315.1.3.1.1.23 | Columnzxr10MplsRemoteTunnelPrimaryUpTime | read-only | current | Specifies the total time the primary instance of this tunnel has been active. The primary instance of this tunnel is defined in zxr10MplsRemoteTunnelPrimaryIns… |
| 1.3.6.1.4.1.3902.3.315.1.3.1.1.26 | Columnzxr10MplsRemoteTunnelCreationTime | read-only | current | Specifies the value of SysUpTime when the first instance of this tunnel came into existence. That is, when the value of zxr10MplsRemoteTunnelOperStatus was fir… |
| 1.3.6.1.4.1.3902.3.315.1.3.1.1.28 | Columnzxr10MplsRemoteTunnelAdminStatus | read-only | current | Indicates the desired operational status of this tunnel. |
| 1.3.6.1.4.1.3902.3.315.1.3.1.1.29 | Columnzxr10MplsRemoteTunnelOperStatus | read-only | current | Indicates the actual operational status of this tunnel, which is typically but not limited to, a function of the state of individual segments of this tunnel. |
| 1.3.6.1.4.1.3902.3.315.1.3.1.1.30 | Columnzxr10MplsRemoteTunnelRowStatus | read-only | current | This variable is used to create, modify, and/or delete a row in this table. When a row in this table is in active(1) state, no objects in that row can be modif… |
| 1.3.6.1.4.1.3902.3.315.1.3.1.1.31 | Columnzxr10MplsRemoteTunnelStorageType | read-only | current | The storage type for this tunnel entry. Conceptual rows having the value 'permanen' need not allow write-access to any columnar objects in the row. |
| 1.3.6.1.4.1.3902.3.315.1.3.1.1.32 | Columnzxr10MplsRemoteTunnelPathExplicitRoute | read-only | current | The explicit route used to set up this LSP. This may either be the route configured by the user, or a route automatically computed to satisfy constraints set b… |
| 1.3.6.1.4.1.3902.3.315.1.3.1.1.33 | Columnzxr10MplsRemoteTunnelPathRecordRoute | read-only | current | The route actually used for this path, as recorded by the signaling protocol. This field is a displayable string in the format of XXX.XXX.XXX.XXX <space> repea… |
| 1.3.6.1.4.1.3902.3.315.1.3.1.1.34 | Columnzxr10MplsRemoteTunnelFrrProtectionMethod | read-only | current | Indicates which protection method is used for fast reroute on this device. unknown(0) indicates no FRR protection exists. facilityBackup(1) indicates bypass pr… |
| 1.3.6.1.4.1.3902.3.315.1.3.1.1.35 | Columnzxr10MplsRemoteTunnelARHopTableIndex | read-only | current | Index into the zxr10MplsTunnelARHopTable entry that specifies the actual hops traversed by the remote tunnel. This is automatically updated by the agent when t… |
| 1.3.6.1.4.1.3902.3.315.1.3.1.1.36 | Columnzxr10MplsRemoteTunnelLspInOctets | read-only | current | The number of octets that have been forwarded over current LSP active path. The number reported is not realtime, may subject to several minutes delay. The dela… |
| 1.3.6.1.4.1.3902.3.315.1.3.1.1.37 | Columnzxr10MplsRemoteTunnelLspInPackets | read-only | current | The number of packets that have been forwarded over current LSP active path. The number reported is not realtime, may subject to several minutes delay. The del… |
| 1.3.6.1.4.1.3902.3.315.1.4 | Nodezxr10MplsTeHopObjects | |||
| 1.3.6.1.4.1.3902.3.315.1.4.1 | Tablezxr10MplsTunnelHopTable | not-accessible | current | The zxr10MplsTunnelHopTable is used to indicate the hops, strict or loose, for an instance of an MPLS tunnel defined in zxr10MplsTunnelTable, when it is establ… |
| 1.3.6.1.4.1.3902.3.315.1.4.1.1 | Rowzxr10MplsTunnelHopEntry | not-accessible | current | An entry in this table represents a tunnel hop. An entry is created by a network administrator for signaled ERLSP set up by an MPLS signalling protocol. |
| 1.3.6.1.4.1.3902.3.315.1.4.1.1.1 | Columnzxr10MplsTunnelHopListIndex | read-only | current | Primary index into this table identifying a particular explicit route object. |
| 1.3.6.1.4.1.3902.3.315.1.4.1.1.2 | Columnzxr10MplsTunnelHopPathOptionIndex | read-only | current | Secondary index into this table identifying a particular group of hops representing a particular configured path. This is otherwise known as a path option. |
| 1.3.6.1.4.1.3902.3.315.1.4.1.1.3 | Columnzxr10MplsTunnelHopIndex | read-only | current | Tertiary index into this table identifying a particular hop. |
| 1.3.6.1.4.1.3902.3.315.1.4.1.1.4 | Columnzxr10MplsTunnelHopAddrType | read-only | current | The Hop Address Type of this tunnel hop. |
| 1.3.6.1.4.1.3902.3.315.1.4.1.1.5 | Columnzxr10MplsTunnelHopIpAddr | read-only | current | The Tunnel Hop Address for this tunnel hop. |
| 1.3.6.1.4.1.3902.3.315.1.4.1.1.6 | Columnzxr10MplsTunnelHopIpPrefixLen | read-only | current | If zxr10MplsTunnelHopAddrType is set to ipv4(1) or ipv6(2), then this value will contain an appropriate prefix length for the IP address in object zxr10MplsTun… |
| 1.3.6.1.4.1.3902.3.315.1.4.1.1.7 | Columnzxr10MplsTunnelHopAsNumber | read-only | current | If zxr10MplsTunnelHopAddrType is set to asnumber(3), then this value will contain the AS number of this hop. Otherwise the agent should set this object to zero… |
| 1.3.6.1.4.1.3902.3.315.1.4.1.1.8 | Columnzxr10MplsTunnelHopAddrUnnum | read-only | current | If zxr10MplsTunnelHopAddrType is set to unnum(4), then this value will contain the interface identifier of the unnumbered interface for this hop. This object s… |
| 1.3.6.1.4.1.3902.3.315.1.4.1.1.9 | Columnzxr10MplsTunnelHopLspId | read-only | current | If zxr10MplsTunnelHopAddrType is set to lspid(5), then this value will contain the LSPID of a tunnel of this hop. The present tunnel being configured is tunnel… |
| 1.3.6.1.4.1.3902.3.315.1.4.1.1.10 | Columnzxr10MplsTunnelHopType | read-only | current | Denotes whether this tunnel hop is routed in a strict or loose fashion. The value of this object has no meaning if the zxr10MplsTunnelHopInclude object is set … |
| 1.3.6.1.4.1.3902.3.315.1.4.1.1.11 | Columnzxr10MplsTunnelHopInclude | read-only | current | If this value is set to true, then this indicates that this hop must be included in the tunnel's path. If this value is set to 'false', then this hoph must be … |
| 1.3.6.1.4.1.3902.3.315.1.4.1.1.12 | Columnzxr10MplsTunnelHopPathOptionName | read-only | current | The description of this series of hops as they relate to the specified path option. The value of this object SHOULD be the same for each hop in the series that… |
| 1.3.6.1.4.1.3902.3.315.1.4.1.1.13 | Columnzxr10MplsTunnelHopEntryPathComp | read-only | current | If this value is set to dynamic, then the user should only specify the source and destination of the path and expect that the CSPF will calculate the remainder… |
| 1.3.6.1.4.1.3902.3.315.1.4.1.1.14 | Columnzxr10MplsTunnelHopRowStatus | read-only | current | This variable is used to create, modify, and/or delete a row in this table. When a row in this table is in active(1) state, no objects in that row can be modif… |
| 1.3.6.1.4.1.3902.3.315.1.4.1.1.15 | Columnzxr10MplsTunnelHopStorageType | read-only | current | The storage type for this Hop entry. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row. |
| 1.3.6.1.4.1.3902.3.315.1.5 | Nodezxr10MplsTeResourceObjects | |||
| 1.3.6.1.4.1.3902.3.315.1.5.1 | Tablezxr10MplsTunnelResourceTable | not-accessible | current | The zxr10MplsTunnelResourceTable allows a manager to specify which resources are desired for an MPLS tunnel. This table also allows several tunnels to point to… |
| 1.3.6.1.4.1.3902.3.315.1.5.1.1 | Rowzxr10MplsTunnelResourceEntry | not-accessible | current | An entry in this table represents a set of resources for an MPLS tunnel. An entry can be created by a network administrator or by an SNMP agent as instructed b… |
| 1.3.6.1.4.1.3902.3.315.1.5.1.1.1 | Columnzxr10MplsTunnelResourceIndex | read-only | current | Uniquely identifies this row. |
| 1.3.6.1.4.1.3902.3.315.1.5.1.1.2 | Columnzxr10MplsTunnelResourceMaxRate | read-only | current | The maximum rate in bits/second. Note that setting zxr10MplsTunnelResourceMaxRate, zxr10MplsTunnelResourceMeanRate, and zxr10MplsTunnelResourceMaxBurstSize to … |
| 1.3.6.1.4.1.3902.3.315.1.5.1.1.3 | Columnzxr10MplsTunnelResourceMeanRate | read-only | current | This object is copied into an instance of mplsTrafficParamMeanRate in the mplsTrafficParamTable. The OID of this table entry is then copied into the correspond… |
| 1.3.6.1.4.1.3902.3.315.1.5.1.1.4 | Columnzxr10MplsTunnelResourceMaxBurstSize | read-only | current | The maximum burst size in bytes. |
| 1.3.6.1.4.1.3902.3.315.1.5.1.1.5 | Columnzxr10MplsTunnelResourceMeanBurstSize | read-only | current | The mean burst size in bytes. The implementations which do not implement this variable must return noSuchObject exception for this object and must not allow a … |
| 1.3.6.1.4.1.3902.3.315.1.5.1.1.6 | Columnzxr10MplsTunnelResourceRowStatus | read-only | current | This variable is used to create, modify, and/or delete a row in this table. When a row in this table is in active(1) state, no objects in that row can be modif… |
| 1.3.6.1.4.1.3902.3.315.1.5.1.1.7 | Columnzxr10MplsTunnelResourceStorageType | read-only | current | The storage type for this Hop entry. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects Srinivasan, et al. Standa… |
| 1.3.6.1.4.1.3902.3.315.1.6 | Nodezxr10MplsTeCHopObjects | |||
| 1.3.6.1.4.1.3902.3.315.1.6.1 | Tablezxr10MplsTunnelCHopTable | not-accessible | current | The zxr10MplsTunnelCHopTable is used to indicate the hops, strict or loose, for an MPLS tunnel defined in zxr10MplsTunnelTable, as computed by a constraintbase… |
| 1.3.6.1.4.1.3902.3.315.1.6.1.1 | Rowzxr10MplsTunnelCHopEntry | not-accessible | current | An entry in this table represents a tunnel hop. An entry in this table is created by a path computation engine using CSPF techniques applied to he information … |
| 1.3.6.1.4.1.3902.3.315.1.6.1.1.1 | Columnzxr10MplsTunnelCHopListIndex | read-only | current | Primary index into this table identifying a particular computed hop list. |
| 1.3.6.1.4.1.3902.3.315.1.6.1.1.2 | Columnzxr10MplsTunnelCHopIndex | read-only | current | Secondary index into this table identifying the particular hop. |
| 1.3.6.1.4.1.3902.3.315.1.6.1.1.3 | Columnzxr10MplsTunnelCHopAddrType | read-only | current | The Hop Address Type of this tunnel hop. Note that lspid(5) is a valid option only for tunnels signaled via CRLDP. |
| 1.3.6.1.4.1.3902.3.315.1.6.1.1.4 | Columnzxr10MplsTunnelCHopIpAddr | read-only | current | The Tunnel Hop Address for this tunnel hop. The type of this address is determined by the value of the corresponding zxr10MplsTunnelCHopAddrType. If zxr10MplsT… |
| 1.3.6.1.4.1.3902.3.315.1.6.1.1.5 | Columnzxr10MplsTunnelCHopIpPrefixLen | read-only | current | If zxr10MplsTunnelCHopAddrType is set to ipv4(1) or ipv6(2), then this value will contain an appropriate prefix length for the IP address in object zxr10MplsTu… |
| 1.3.6.1.4.1.3902.3.315.1.6.1.1.6 | Columnzxr10MplsTunnelCHopAsNumber | read-only | current | If zxr10MplsTunnelCHopAddrType is set to asnumber(3), then this value will contain the AS number of this hop. Otherwise the agent should set this object to zer… |
| 1.3.6.1.4.1.3902.3.315.1.6.1.1.7 | Columnzxr10MplsTunnelCHopAddrUnnum | read-only | current | If zxr10MplsTunnelCHopAddrType is set to unnum(4), then this value will contain the unnumbered interface identifier of this hop. This object should be used in … |
| 1.3.6.1.4.1.3902.3.315.1.6.1.1.8 | Columnzxr10MplsTunnelCHopLspId | read-only | current | If zxr10MplsTunnelCHopAddrType is set to lspid(5), then his value will contain the LSP ID of this hop. his object is otherwise insignificant and should contain… |
| 1.3.6.1.4.1.3902.3.315.1.6.1.1.9 | Columnzxr10MplsTunnelCHopType | read-only | current | Denotes whether this is tunnel hop is routed in a strict or loose fashion. |
| 1.3.6.1.4.1.3902.3.315.1.7 | Nodezxr10MplsTeARHopObjects | |||
| 1.3.6.1.4.1.3902.3.315.1.7.1 | Tablezxr10MplsTunnelARHopTable | not-accessible | current | The zxr10MplsTunnelARHopTable is used to indicate the hops for an MPLS tunnel defined in zxr10MplsTunnelTable, as reported by the MPLS signalling protocol. Thu… |
| 1.3.6.1.4.1.3902.3.315.1.7.1.1 | Rowzxr10MplsTunnelARHopEntry | not-accessible | current | An entry in this table represents a tunnel hop. An entry is created by the agent for signaled ERLSP set up by an MPLS signalling protocol. |
| 1.3.6.1.4.1.3902.3.315.1.7.1.1.1 | Columnzxr10MplsTunnelARHopListIndex | read-only | current | Primary index into this table identifying a particular recorded hop list. |
| 1.3.6.1.4.1.3902.3.315.1.7.1.1.2 | Columnzxr10MplsTunnelARHopIndex | read-only | current | Secondary index into this table identifying the particular hop. |
| 1.3.6.1.4.1.3902.3.315.1.7.1.1.3 | Columnzxr10MplsTunnelARHopAddrType | read-only | current | The Hop Address Type of this tunnel hop. ote that lspid(5) is a valid option only for tunnels signaled via CRLDP. |
| 1.3.6.1.4.1.3902.3.315.1.7.1.1.4 | Columnzxr10MplsTunnelARHopIpAddr | read-only | current | The Tunnel Hop Address for this tunnel hop. The type of this address is determined by the value of the corresponding zxr10MplsTunnelARHopAddrType. If zxr10Mpls… |
| 1.3.6.1.4.1.3902.3.315.1.7.1.1.5 | Columnzxr10MplsTunnelARHopAddrUnnum | read-only | current | If zxr10MplsTunnelARHopAddrType is set to unnum(4), then this value will contain the interface identifier of the unnumbered interface for this hop. This object… |
| 1.3.6.1.4.1.3902.3.315.1.7.1.1.6 | Columnzxr10MplsTunnelARHopLspId | read-only | current | If zxr10MplsTunnelARHopAddrType is set to lspid(5), then this value will contain the LSP ID of this hop. This object is otherwise insignificant and should cont… |
| 1.3.6.1.4.1.3902.3.315.1.8 | Nodezxr10MplsTeInterfaceObjects | |||
| 1.3.6.1.4.1.3902.3.315.1.8.1 | Tablezxr10MplsInterfaceTable | not-accessible | obsolete | A list of mpls traffic-eng interface entries. |
| 1.3.6.1.4.1.3902.3.315.1.8.1.1 | Rowzxr10MplsInterfaceEntry | not-accessible | obsolete | An entry containing mpls traffic-eng interface. |
| 1.3.6.1.4.1.3902.3.315.1.8.1.1.1 | Columnzxr10MplsInterfaceIndex | read-only | obsolete | A unique value, greater than zero, for each interface whitch enables mpls traffic-eng. |
| 1.3.6.1.4.1.3902.3.315.1.8.1.1.2 | Columnzxr10MplsInterfaceName | read-only | obsolete | The name of this interface. |
| 1.3.6.1.4.1.3902.3.315.1.8.1.1.3 | Columnzxr10MplsInterfaceIpAddr | read-only | obsolete | The ip address of this interface. |
| 1.3.6.1.4.1.3902.3.315.1.8.1.1.4 | Columnzxr10MplsInterfaceMask | read-only | obsolete | The subnet mask of this interface. |
| 1.3.6.1.4.1.3902.3.315.1.8.1.1.5 | Columnzxr10MplsInterfaceBfdEnable | read-only | obsolete | If this interface enables bfd,this value is true,otherwise it is false. |
| 1.3.6.1.4.1.3902.3.315.1.8.1.1.6 | Columnzxr10MplsInterfaceAuthEnable | read-only | obsolete | If this interface enables RSVP cryptographic authentication, this value is true,otherwise it is false. |
| 1.3.6.1.4.1.3902.3.315.1.8.1.1.7 | Columnzxr10MplsInterfaceAuthChallengeEnable | read-only | obsolete | If this interface as a receiver enables rsvp authentication challenge,this value is true,otherwise it is false. |
| 1.3.6.1.4.1.3902.3.315.1.8.1.1.8 | Columnzxr10MplsInterfaceAuthChallengeImpEnable | read-only | obsolete | If this interface as a sender enables rsvp authentication challenge,this value is true,otherwise it is false. |
| 1.3.6.1.4.1.3902.3.315.1.8.1.1.9 | Columnzxr10MplsInterfaceAuthLifeTime | read-only | obsolete | Specifies maximum lifetime of neighbor authentication state on this interface |
| 1.3.6.1.4.1.3902.3.315.1.8.1.1.10 | Columnzxr10MplsInterfaceAuthKey | read-only | obsolete | Specifies shared secret for all neighbors on this interface. |
| 1.3.6.1.4.1.3902.3.315.1.8.1.1.11 | Columnzxr10MplsInterfaceAuthType | read-only | obsolete | Specifies the type of authentication algorithm on this interface. |
| 1.3.6.1.4.1.3902.3.315.1.8.1.1.12 | Columnzxr10MplsInterfaceAuthWinSize | read-only | obsolete | Specifies received window size for authenticated messages on this interface. |
| 1.3.6.1.4.1.3902.3.315.1.8.1.1.13 | Columnzxr10MplsInterfaceTotalBandwidth | read-only | obsolete | Specifies reservable total bandwidth on this interface. |
| 1.3.6.1.4.1.3902.3.315.1.8.1.1.14 | Columnzxr10MplsInterfaceAvailableBandwidth | read-only | obsolete | Specifies available bandwidth on this interface. |
| 1.3.6.1.4.1.3902.3.315.1.8.1.1.15 | Columnzxr10MplsInterfaceMetric | read-only | obsolete | The config metric of mpls te interface. |
| 1.3.6.1.4.1.3902.3.315.1.8.1.1.16 | Columnzxr10MplsInterfaceAutobakTunnelEnable | read-only | obsolete | If this object is true, then it prefers NODE_PROTECT to LINK_PROTECT by autobackup tunnel. |
| 1.3.6.1.4.1.3902.3.315.1.8.1.1.17 | Columnzxr10MplsInterfaceAutobakTunnelNhoponly | read-only | obsolete | If this object is true, then it only requires LINK_PROTECT by autobackup tunnel. |
| 1.3.6.1.4.1.3902.3.315.1.8.1.1.18 | Columnzxr10MplsInterfaceSrlgs | read-only | obsolete | Specifies srlgs on this interface. |
| 1.3.6.1.4.1.3902.3.315.1.8.1.1.19 | Columnzxr10MplsInterfaceAttributeFlags | read-only | obsolete | Specifies attribute flags on this interface. |
| 1.3.6.1.4.1.3902.3.315.1.9 | Nodezxr10MplsIpExplicitObjects | |||
| 1.3.6.1.4.1.3902.3.315.1.9.1 | Tablezxr10MplsIpExplicitTable | not-accessible | obsolete | Explicit-path table is user configured,the user should specify the entire path for the tunnel to take. This path may contain strict or loose hops. Each hop alo… |
| 1.3.6.1.4.1.3902.3.315.1.9.1.1 | Rowzxr10MplsIpExplicitEntry | not-accessible | obsolete | Explicit-path table entry. |
| 1.3.6.1.4.1.3902.3.315.1.9.1.1.1 | Columnzxr10MplsIpExplicitNameType | read-only | obsolete | First index of Explicit-path table. |
| 1.3.6.1.4.1.3902.3.315.1.9.1.1.2 | Columnzxr10MplsIpExplicitName | read-only | obsolete | Secondary index of Explicit-path table.If the explicit name type is explicitId then this value is a number, or it is a string. |
| 1.3.6.1.4.1.3902.3.315.1.9.1.1.3 | Columnzxr10MplsIpExplicitType | read-only | obsolete | router type string list 1:strict 2:loose 3:exclude intf 4:exclude router-id eg. 1.4.3.2 |
| 1.3.6.1.4.1.3902.3.315.1.9.1.1.4 | Columnzxr10MplsIpExplicitNextIpAddr | read-only | obsolete | Identify the next hop IP address,This field is a displayable string in the format of 'XXX.XXX.XXX.XXX,' repeated.Example:1.1.1.1,1.1.1.2,... |
| 1.3.6.1.4.1.3902.3.315.1.9.1.1.5 | Columnzxr10MplsIpExplicitIndex | read-only | obsolete | ip addr index,This field is a displayable string in the format of '1,2,...'. |
| 1.3.6.1.4.1.3902.3.315.1.10 | Nodezxr10MplsPathOptObjects | |||
| 1.3.6.1.4.1.3902.3.315.1.10.1 | Tablezxr10MplsPathOptTable | not-accessible | obsolete | Path option Table. |
| 1.3.6.1.4.1.3902.3.315.1.10.1.1 | Rowzxr10MplsPathOptEntry | not-accessible | obsolete | Path option Table entry. |
| 1.3.6.1.4.1.3902.3.315.1.10.1.1.1 | Columnzxr10MplsPathOptIndex | read-only | obsolete | The index of path option whitch equals to tunnel index. |
| 1.3.6.1.4.1.3902.3.315.1.10.1.1.2 | Columnzxr10MplsPathOptValue | read-only | obsolete | Secondary index whitch identifies the configure value of path option . |
| 1.3.6.1.4.1.3902.3.315.1.10.1.1.3 | Columnzxr10MplsPathOptType | read-only | obsolete | If this value is dynamic ,indicates that user only specify the source and destination of the path and the CSPF will calculate the remainder of the path. If thi… |
| 1.3.6.1.4.1.3902.3.315.1.10.1.1.4 | Columnzxr10MplsPathOptName | read-only | obsolete | This value identifier the name of the path-option,when the type of the path-option is explicitName,the other times the value is null. |
| 1.3.6.1.4.1.3902.3.315.1.10.1.1.5 | Columnzxr10MplsPathOptHotStandbyType | read-only | obsolete | Specifies the hotstandby protect type of the path-option. |
| 1.3.6.1.4.1.3902.3.315.1.10.1.1.6 | Columnzxr10MplsPathOptHotStandbyBackupPathName | read-only | obsolete | The name of Backup path.If the type of hotstandby protection is dynamic,then this value is '1'; if the type is dynamic prefer,then this value is '2'; if the ty… |
| 1.3.6.1.4.1.3902.3.315.1.11 | Nodezxr10MplsAdminGroupListObjects | |||
| 1.3.6.1.4.1.3902.3.315.1.11.1 | Tablezxr10MplsAdminGroupListTable | not-accessible | obsolete | List of configured administrative groups. Administrative groups are used to label links in the Traffic Engineering topology in order to place constraints (incl… |
| 1.3.6.1.4.1.3902.3.315.1.11.1.1 | Rowzxr10MplsAdminGroupListEntry | not-accessible | obsolete | A mapping between a configured group number and its human-readable name. The group number should be between 0 and 31, inclusive. |
| 1.3.6.1.4.1.3902.3.315.1.11.1.1.1 | Columnzxr10MplsAdminGroupNumber | read-only | obsolete | Index of the administrative group. |
| 1.3.6.1.4.1.3902.3.315.1.11.1.1.2 | Columnzxr10MplsAdminGroupName | read-only | obsolete | Name of the administrative group. |
| 1.3.6.1.4.1.3902.3.315.1.12 | Nodezxr10MplsHotStandbyLspObjects | |||
| 1.3.6.1.4.1.3902.3.315.1.12.1 | Tablezxr10MplsHotStandbyLspTable | not-accessible | current | |
| 1.3.6.1.4.1.3902.3.315.1.12.1.1 | Rowzxr10MplsHotStandbyLspEntry | not-accessible | current | |
| 1.3.6.1.4.1.3902.3.315.1.12.1.1.1 | Columnzxr10MplsHotTunnelIndex | read-only | current | Uniquely identifies a set of tunnel instances between a pair of ingress and egress LSRs. Managers should obtain new values for row creation in this table by re… |
| 1.3.6.1.4.1.3902.3.315.1.12.1.1.2 | Columnzxr10MplsHotTunnelInstance | read-only | current | Uniquely identifies a particular instance of a tunnel between a pair of ingress and egress LSRs. It is useful to identify multiple instances of tunnels for the… |
| 1.3.6.1.4.1.3902.3.315.1.12.1.1.3 | Columnzxr10MplsHotTunnelIngressLSRId | read-only | current | Identity of the ingress LSR associated with this tunnel instance. When the MPLS signalling protocol is rsvp(2) this value SHOULD be equal to the Tunnel Sender … |
| 1.3.6.1.4.1.3902.3.315.1.12.1.1.4 | Columnzxr10MplsHotTunnelEgressLSRId | read-only | current | Identity of the egress LSR associated with this tunnel instance. |
| 1.3.6.1.4.1.3902.3.315.1.12.1.1.5 | Columnzxr10MplsHotTunnelOutLabel | read-only | current | Out label of hotstandby tunnel. |
| 1.3.6.1.4.1.3902.3.315.1.12.1.1.6 | Columnzxr10MplsHotTunnelOutIntf | read-only | current | The name of out interface that hotstandby tunnel transits. |
| 1.3.6.1.4.1.3902.3.315.1.12.1.1.7 | Columnzxr10MplsHotTunnelRole | read-only | current | This value signifies the role that this tunnel entry/instance represents. This value MUST be set to head(1) at the originating point of the tunnel. This value … |
| 1.3.6.1.4.1.3902.3.315.1.12.1.1.8 | Columnzxr10MplsHotTunnelSessionAttributes | read-only | current | This bit mask indicates optional session values for this tunnel. |
| 1.3.6.1.4.1.3902.3.315.1.12.1.1.9 | Columnzxr10MplsHotTunnelResourcePointer | read-only | current | This variable represents a pointer to the traffic parameter specification for this tunnel. This value may point at an entry in the zxr10MplsTunnelResourceEntry… |
| 1.3.6.1.4.1.3902.3.315.1.12.1.1.10 | Columnzxr10MplsHotTunnelInstancePriority | read-only | current | This value indicates which priority, in descending order, with 0 indicating the lowest priority, within a group of tunnel instances. A group of tunnel instance… |
| 1.3.6.1.4.1.3902.3.315.1.12.1.1.11 | Columnzxr10MplsHotTunnelHopTableIndex | read-only | current | Index into the zxr10MplsTunnelHopTable entry that specifies the explicit route hops for this tunnel. This object is meaningful only at the head-end of the tunn… |
| 1.3.6.1.4.1.3902.3.315.1.12.1.1.12 | Columnzxr10MplsHotTunnelPathInUse | read-only | current | This value denotes the configured path that was chosen for this tunnel. This value reflects the secondary index into zxr10MplsTunnelHopTable. This path may not… |
| 1.3.6.1.4.1.3902.3.315.1.12.1.1.13 | Columnzxr10MplsHotTunnelARHopTableIndex | read-only | current | Index into the zxr10MplsTunnelARHopTable entry that specifies the actual hops traversed by the tunnel. This is automatically updated by the agent when the actu… |
| 1.3.6.1.4.1.3902.3.315.1.12.1.1.14 | Columnzxr10MplsHotTunnelCHopTableIndex | read-only | current | Index into the zxr10MplsTunnelCHopTable entry that specifies the computed hops traversed by the tunnel. This is automatically updated by the agent when compute… |
| 1.3.6.1.4.1.3902.3.315.1.12.1.1.15 | Columnzxr10MplsHotTunnelInstanceUpTime | read-only | current | This value identifies the total time that this tunnel instance's operStatus has been Up(1). |
| 1.3.6.1.4.1.3902.3.315.1.12.1.1.16 | Columnzxr10MplsHotTunnelOperStatus | read-only | current | Indicates the actual operational status of this tunnel, which is typically but not limited to, a function of the state of individual segments of this tunnel. |
| 1.3.6.1.4.1.3902.3.315.1.12.1.1.17 | Columnzxr10MplsHotTunnelRowStatus | read-only | current | This variable is used to create, modify, and/or delete a row in this table. When a row in this table is in active(1) state, no objects in that row can be modif… |