ZXR10-ROUTE-MAP-MIB
571 objects
The MIB module to describe the RMAP protocol.
Imported Objects
| IPV6-TC | Ipv6Address |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 enterprises Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress RowStatus TEXTUAL-CONVENTION TruthValue |
| ZXR10-SMI | zxr10 zxr10RosngMIB |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3902.3.6000.604 | Identityzxr10RMAPMIB | The MIB module to describe the RMAP protocol. | ||
| 1.3.6.1.4.1.3902.3.6000.604.1 | Nodezxr10RMAPGlobalObjects | |||
| 1.3.6.1.4.1.3902.3.6000.604.2 | Nodezxr10RMAPObjects | |||
| 1.3.6.1.4.1.3902.3.6000.604.2.1 | Nodezxr10RMAPRuleObjects | |||
| 1.3.6.1.4.1.3902.3.6000.604.2.1.1 | Tablezxr10RMAPNameTable | not-accessible | current | Route-map Name Table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.1.1 | Rowzxr10RMAPNameEntry | not-accessible | current | Route-map Name |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.1.1.1 | Columnzxr10RMAPName | not-accessible | current | Name of Route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.1.1.2 | Columnzxr10RMAPSequence | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.1.1.3 | Columnzxr10RMAPAction | read-create | current | permit:Match success deny :Match failed |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.1.1.100 | Columnzxr10RMAPRowStatus | read-create | current | RowStatus |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.2 | Tablezxr10RMAPMatchAspathTable | not-accessible | current | Route-map Match Aspath Table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.2.1 | Rowzxr10RMAPMatchAspathEntry | not-accessible | current | Match BGP as-path list |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.2.1.1 | Columnzxr10RMAPAspathName | not-accessible | current | Name of Route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.2.1.2 | Columnzxr10RMAPAspathSequence | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.2.1.3 | Columnzxr10RMAPAspathNo | not-accessible | current | Aspath List Number. The range of config is 0 to 199. Each sequence has 10 match aspath items at most |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.2.1.4 | Columnzxr10RMAPAspathMatchName | not-accessible | current | Name of Aspath (0-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.2.1.100 | Columnzxr10RMAPAspathRowStatus | read-create | current | RowStatus |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.3 | Tablezxr10RMAPMatchCommunityTable | not-accessible | current | Route-map Match Community Table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.3.1 | Rowzxr10RMAPMatchCommunityEntry | not-accessible | current | Match BGP community list |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.3.1.1 | Columnzxr10RMAPCommunityName | not-accessible | current | Name of Route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.3.1.2 | Columnzxr10RMAPCommunitySequence | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.3.1.3 | Columnzxr10RMAPCommunityNo | not-accessible | current | Community list number. The range of config is 0 to 499. Each sequence has 10 match community items at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.3.1.4 | Columnzxr10RMAPCommunityMatchName | not-accessible | current | Name of Community (0-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.3.1.100 | Columnzxr10RMAPCommunityRowStatus | read-create | current | RowStatus |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.4 | Tablezxr10RMAPMatchExtCommunityTable | not-accessible | current | Route-map Match ExtCommunity Table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.4.1 | Rowzxr10RMAPMatchExtCommunityEntry | not-accessible | current | Match BGP extcommunity list |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.4.1.1 | Columnzxr10RMAPExtCommunityName | not-accessible | current | Name of Route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.4.1.2 | Columnzxr10RMAPExtCommunitySequence | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.4.1.3 | Columnzxr10RMAPExtCommunityNo | not-accessible | current | ExtCommunity list number. The range of config is 0 to 500. Each sequence has 10 match extcommunity items at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.4.1.4 | Columnzxr10RMAPExtCommunityMatchName | not-accessible | current | Name of ExtCommunity (0-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.4.1.100 | Columnzxr10RMAPExtCommunityRowStatus | read-create | current | RowStatus |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.5 | Tablezxr10RMAPMatchInterfaceTable | not-accessible | current | Route-map Match Interface Table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.5.1 | Rowzxr10RMAPMatchInterfaceEntry | not-accessible | current | Match first hop interface of route |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.5.1.1 | Columnzxr10RMAPInterfaceName | not-accessible | current | Name of Route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.5.1.2 | Columnzxr10RMAPInterfaceSequence | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.5.1.3 | Columnzxr10RMAPInterface | not-accessible | current | Interface Name(1-31 characters). Each sequence has 10 match interface items at most. This match item supports these types of interface: [PORT-CLASS-FEI, PORT-C… |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.5.1.100 | Columnzxr10RMAPInterfaceRowStatus | read-create | current | RowStatus |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.6 | Tablezxr10RMAPMatchIpAddressAclTable | not-accessible | current | Route-map Match IpAddress Table(match ip address by acl). |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.6.1 | Rowzxr10RMAPMatchIpAddressAclEntry | not-accessible | current | Match address of route or match packet. This match item sets the route-map name with ipv4 type. It conflicts with other match or set items which set the route-… |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.6.1.1 | Columnzxr10RMAPMatchAclName | not-accessible | current | Name of Route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.6.1.2 | Columnzxr10RMAPMatchAclSequence | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.6.1.3 | Columnzxr10RMAPAclName | not-accessible | current | Name of an access-list(1-31 characters). Each sequence has 10 match ip address items at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.6.1.4 | Columnzxr10RMAPIsConfigAcl | not-accessible | current | It expresses that this config is match ip address by acl. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.6.1.100 | Columnzxr10RMAPMatchAclRowStatus | read-create | current | RowStatus |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.7 | Tablezxr10RMAPMatchIpAddressPflTable | not-accessible | current | Route-map Match IpAddress Table(match ip address by pfl) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.7.1 | Rowzxr10RMAPMatchIpAddressPflEntry | not-accessible | current | Match address of route or match packet. This match item sets the route-map name with ipv4 type. It conflicts with other match or set items which set the route-… |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.7.1.1 | Columnzxr10RMAPMatchPflName | not-accessible | current | Name of Route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.7.1.2 | Columnzxr10RMAPMatchPflSequence | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.7.1.3 | Columnzxr10RMAPPflName | not-accessible | current | Name of a prefix list (1-31 characters). Each sequence has 10 match ip address items at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.7.1.4 | Columnzxr10RMAPIsConfigPfl | not-accessible | current | It expresses that this config is match ip address by pfl. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.7.1.100 | Columnzxr10RMAPMatchPflRowStatus | read-create | current | RowStatus |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.8 | Tablezxr10RMAPMatchIpMetricTable | not-accessible | current | Route-map Match IpMetric Table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.8.1 | Rowzxr10RMAPMatchIpMetricEntry | not-accessible | current | Match metric of route. This match item sets the route-map name with ipv4 type. It conflicts with other match or set items which set the route-map name with ipv… |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.8.1.1 | Columnzxr10RMAPIpMetricName | not-accessible | current | Name of Route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.8.1.2 | Columnzxr10RMAPIpMetricSequence | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.8.1.3 | Columnzxr10RMAPIpMetric | not-accessible | current | Metric Value. The range of config is 0 to 4294967295. Each sequence has 10 match ip metric items at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.8.1.100 | Columnzxr10RMAPIpMetricRowStatus | read-create | current | RowStatus |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.9 | Tablezxr10RMAPMatchIpNextHopTable | not-accessible | current | Route-map Match IpNextHop Table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.9.1 | Rowzxr10RMAPMatchIpNextHopEntry | not-accessible | current | Match next-hop address of route. This match item sets the route-map name with ipv4 type. It conflicts with other match or set items which set the route-map nam… |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.9.1.1 | Columnzxr10RMAPIpNextHopName | not-accessible | current | Name of Route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.9.1.2 | Columnzxr10RMAPIpNextHopSequence | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.9.1.3 | Columnzxr10RMAPIpNextHop | not-accessible | current | Name of an access-list(1-31 characters). Each sequence has 10 match ip next-hop items at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.9.1.100 | Columnzxr10RMAPIpNextHopRowStatus | read-create | current | RowStatus |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.10 | Tablezxr10RMAPMatchIpTagTable | not-accessible | current | Route-map Match IpTag Table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.10.1 | Rowzxr10RMAPMatchIpTagEntry | not-accessible | current | Match tag of route. This match item sets the route-map name with ipv4 type. It conflicts with other match or set items which set the route-map name with ipv6 t… |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.10.1.1 | Columnzxr10RMAPIpTagName | not-accessible | current | Name of Route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.10.1.2 | Columnzxr10RMAPIpTagSequence | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.10.1.3 | Columnzxr10RMAPIpTag | not-accessible | current | Tag Value. The range of config is 0 to 4294967295. Each sequence has 10 match ip tag items at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.10.1.100 | Columnzxr10RMAPIpTagRowStatus | read-create | current | RowStatus |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.11 | Tablezxr10RMAPMatchIpv6AddressTable | not-accessible | obsolete | Route-map Match Ipv6Address Table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.11.1 | Rowzxr10RMAPMatchIpv6AddressEntry | not-accessible | obsolete | Match address of route or match packet. This match item sets the route-map name with ipv6 type. It conflicts with other match or set items which set the route-… |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.11.1.1 | Columnzxr10RMAPIpv6AddressName | not-accessible | obsolete | Name of Route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.11.1.2 | Columnzxr10RMAPIpv6AddressSequence | not-accessible | obsolete | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.11.1.3 | Columnzxr10RMAPIpv6Address | not-accessible | obsolete | Name of an access-list(1-31 characters). Each sequence has 10 match ipv6 address items at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.11.1.100 | Columnzxr10RMAPIpv6AddressRowStatus | read-create | obsolete | RowStatus |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.12 | Tablezxr10RMAPMatchIpv6MetricTable | not-accessible | current | Route-map Match Ipv6Metric Table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.12.1 | Rowzxr10RMAPMatchIpv6MetricEntry | not-accessible | current | Match metric of route. This match item sets the route-map name with ipv6 type. It conflicts with other match or set items which set the route-map name with ipv… |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.12.1.1 | Columnzxr10RMAPIpv6MetricName | not-accessible | current | Name of Route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.12.1.2 | Columnzxr10RMAPIpv6MetricSequence | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.12.1.3 | Columnzxr10RMAPIpv6Metric | not-accessible | current | Metric Value. The range of config is 0 to 4294967295. Each sequence has 10 match ipv6 metric items at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.12.1.100 | Columnzxr10RMAPIpv6MetricRowStatus | read-create | current | RowStatus |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.13 | Tablezxr10RMAPMatchIpv6NextHopTable | not-accessible | current | Route-map Match Ipv6NextHop Table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.13.1 | Rowzxr10RMAPMatchIpv6NextHopEntry | not-accessible | current | Match next-hop address of route. This match item sets the route-map name with ipv6 type. It conflicts with other match or set items which set the route-map nam… |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.13.1.1 | Columnzxr10RMAPIpv6NextHopName | not-accessible | current | Name of Route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.13.1.2 | Columnzxr10RMAPIpv6NextHopSequence | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.13.1.3 | Columnzxr10RMAPIpv6NextHop | not-accessible | current | Name of an access-list(1-31 characters). Each sequence has 10 match ipv6 next-hop items at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.13.1.100 | Columnzxr10RMAPIpv6NextHopRowStatus | read-create | current | RowStatus |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.14 | Tablezxr10RMAPMatchIpv6TagTable | not-accessible | current | Route-map Match Ipv6Tag Table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.14.1 | Rowzxr10RMAPMatchIpv6TagEntry | not-accessible | current | Match tag of route. This match item sets the route-map name with ipv6 type. It conflicts with other match or set items which set the route-map name with ipv4 t… |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.14.1.1 | Columnzxr10RMAPIpv6TagName | not-accessible | current | Name of Route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.14.1.2 | Columnzxr10RMAPIpv6TagSequence | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.14.1.3 | Columnzxr10RMAPIpv6Tag | not-accessible | current | Tag Value. The range of config is 0 to 4294967295. Each sequence has 10 match ipv6 tag items at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.14.1.100 | Columnzxr10RMAPIpv6TagRowStatus | read-create | current | RowStatus |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.15 | Tablezxr10RMAPMatchRdTable | not-accessible | current | Route-map Match Rd Table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.15.1 | Rowzxr10RMAPMatchRdEntry | not-accessible | current | Match BGP/VPN rd list |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.15.1.1 | Columnzxr10RMAPMatchRdName | not-accessible | current | Name of Route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.15.1.2 | Columnzxr10RMAPMatchRdSequence | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.15.1.3 | Columnzxr10RMAPMatchRd | not-accessible | current | Rd-list number. The range of config is 1 to 500. 0 is invalid value. Each sequence has 10 match rd-list items at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.15.1.100 | Columnzxr10RMAPMatchRdRowStatus | read-create | current | RowStatus |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.16 | Tablezxr10RMAPMatchRouteTypeTable | not-accessible | current | Route-map Match RouteType Table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.16.1 | Rowzxr10RMAPMatchRouteTypeEntry | not-accessible | current | Match route-type of route |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.16.1.1 | Columnzxr10RMAPMatchRouteTypeName | not-accessible | current | Name of Route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.16.1.2 | Columnzxr10RMAPMatchRouteTypeSequence | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.16.1.3 | Columnzxr10RMAPMatchRouteType | not-accessible | current | local Locally generated route.Value is 1. internal Internal route (including OSPF intra/inter area).Value is 2. level-1 IS-IS level-1 route.Value is 3. level-2… |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.16.1.4 | Columnzxr10RMAPMatchExternType | not-accessible | current | type-1 OSPF external type 1 route.Value is 6. type-2 OSPF external type 2 route.Value is 7. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.16.1.100 | Columnzxr10RMAPMatchRouteTypeRowStatus | read-create | current | RowStatus |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.17 | Tablezxr10RMAPSetAspathTable | not-accessible | current | Route-map Set Aspath Table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.17.1 | Rowzxr10RMAPSetAspathEntry | not-accessible | current | Set prepend string for a BGP as-path attribute. 0 is invalid value. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.17.1.1 | Columnzxr10RMAPSetAspathName | not-accessible | current | Name of Route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.17.1.2 | Columnzxr10RMAPSetAspathSequence | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.17.1.3 | Columnzxr10RMAPSetAspathAsnd1 | read-create | current | AS number. The range of config is 1 to 4294967295. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.17.1.4 | Columnzxr10RMAPSetAspathAsnd2 | read-create | current | AS number. The range of config is 1 to 4294967295. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.17.1.5 | Columnzxr10RMAPSetAspathAsnd3 | read-create | current | AS number. The range of config is 1 to 4294967295. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.17.1.6 | Columnzxr10RMAPSetAspathAsnd4 | read-create | current | AS number. The range of config is 1 to 4294967295. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.17.1.7 | Columnzxr10RMAPSetAspathAsnd5 | read-create | current | AS number. The range of config is 1 to 4294967295. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.17.1.8 | Columnzxr10RMAPSetAspathAsnd6 | read-create | current | AS number. The range of config is 1 to 4294967295. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.17.1.9 | Columnzxr10RMAPSetAspathAsnd7 | read-create | current | AS number. The range of config is 1 to 4294967295. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.17.1.10 | Columnzxr10RMAPSetAspathAsnd8 | read-create | current | AS number. The range of config is 1 to 4294967295. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.17.1.11 | Columnzxr10RMAPSetAspathAsnd9 | read-create | current | AS number. The range of config is 1 to 4294967295. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.17.1.12 | Columnzxr10RMAPSetAspathAsnd10 | read-create | current | AS number. The range of config is 1 to 4294967295. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.17.1.13 | Columnzxr10RMAPSetAspathPrepOrRep | read-create | current | Set aspath prepend or replace,prepend is 1,replace is 2 |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.17.1.100 | Columnzxr10RMAPSetAspathRowStatus | read-create | current | RowStatus |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.18 | Tablezxr10RMAPSetCommunityConstTable | not-accessible | current | Route-map Set Community Table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.18.1 | Rowzxr10RMAPSetCommunityConstEntry | not-accessible | current | Set BGP community attribute. The value of config includes: internet Internet(Well known community) no-advertise Do not advertise to any peer no-export Do not e… |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.18.1.1 | Columnzxr10RMAPSetCommName | not-accessible | current | Name of Route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.18.1.2 | Columnzxr10RMAPSetCommSequence | not-accessible | current | Sequence of Route-map. The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.18.1.3 | Columnzxr10RMAPSetCommIsAddtive | not-accessible | current | additive Add to the existing community. Value is 5. none No community attribute. Value is 6. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.18.1.4 | Columnzxr10RMAPSetCommConstVal | not-accessible | current | internet Internet(Well known community). Value is 4. no-advertise Do not advertise to any peer. Value is 2. no-export Do not export to next AS. Value is 1. no-… |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.18.1.100 | Columnzxr10RMAPSetCommConstRowStatus | read-create | current | RowStatus |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.19 | Tablezxr10RMAPSetCommunityAsnnTable | not-accessible | current | Route-map Set Community Table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.19.1 | Rowzxr10RMAPSetCommunityAsnnEntry | not-accessible | current | Set BGP community attribute in aa:nn format. If set community has been setted with attribute addtive, other configs of set community can't be setted without at… |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.19.1.1 | Columnzxr10RMAPSetCommAsnnName | not-accessible | current | Name of Route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.19.1.2 | Columnzxr10RMAPSetCommAsnnSequence | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.19.1.3 | Columnzxr10RMAPSetCommAsnnIsAddtive | not-accessible | current | additive Add to the existing community. Value is 5. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.19.1.4 | Columnzxr10RMAPSetCommAsnn | not-accessible | current | Community number in aa:nn format. The range of aa is 0 to 65535. The range of nn is 0 to 65535. The ASCII code of : is 58. The ASCII code from 1 to 9 is 49 to … |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.19.1.100 | Columnzxr10RMAPSetCommAsnnRowStatus | read-create | current | RowStatus |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.20 | Tablezxr10RMAPSetCommunityUintTable | not-accessible | current | Route-map Set Community Table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.20.1 | Rowzxr10RMAPSetCommunityUintEntry | not-accessible | current | Set BGP community attribute in Unsigned32 format. If set community has been setted with addtive attribute, other configs of set community can't be setted witho… |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.20.1.1 | Columnzxr10RMAPSetCommUintName | not-accessible | current | Name of Route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.20.1.2 | Columnzxr10RMAPSetCommUintSequence | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.20.1.3 | Columnzxr10RMAPSetCommUintIsAddtive | not-accessible | current | additive Add to the existing community. Value is 5. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.20.1.4 | Columnzxr10RMAPSetCommUint | not-accessible | current | Community number in unsigned32 format. The range of config is 1 to 4294967295. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.20.1.100 | Columnzxr10RMAPSetCommUintRowStatus | read-create | current | RowStatus |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.21 | Tablezxr10RMAPSetDampeningTable | not-accessible | current | Route-map Set Dampening Table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.21.1 | Rowzxr10RMAPSetDampeningEntry | not-accessible | current | Set BGP route flap dampening parameters |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.21.1.1 | Columnzxr10RMAPSetDampeningName | not-accessible | current | Name of Route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.21.1.2 | Columnzxr10RMAPSetDampeningSequence | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.21.1.3 | Columnzxr10RMAPSetDampeningHalfLife | read-create | current | Half-life time for the penalty. The range of config is 1 to 45. The value for half-life should be smaller than max duration to suppress. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.21.1.4 | Columnzxr10RMAPSetDampeningReuse | read-create | current | Penalty to start reusing a route. The range of config is 1 to 20000. The value for reusing should be smaller than the value for suppressing. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.21.1.5 | Columnzxr10RMAPSetDampeningSuppress | read-create | current | Penalty to start suppressing a route. The range of config is 1 to 20000. The value for suppressing should be larger than the value for reusing. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.21.1.6 | Columnzxr10RMAPSetDampeningMaxSupTime | read-create | current | Maximum duration to suppress a stable route. The range of config is 1 to 255. The value for max duration to suppress should be larger than half-life. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.21.1.100 | Columnzxr10RMAPSetDampeningRowStatus | read-create | current | RowStatus |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.22 | Tablezxr10RMAPSetDscpTable | not-accessible | current | Route-map Set Dscp Table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.22.1 | Rowzxr10RMAPSetDscpEntry | not-accessible | current | Set DSCP for PBR. This set item conflicts with these items below: set ip precedence set ip tos set ipv6 precedence set ipv6 traffic-class |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.22.1.1 | Columnzxr10RMAPSetDscpName | not-accessible | current | Name of Route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.22.1.2 | Columnzxr10RMAPSetDscpSequence | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.22.1.3 | Columnzxr10RMAPSetDscp | read-create | current | Type of service value. The range of config is 0 to 63. 255 is invalid value. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.22.1.100 | Columnzxr10RMAPSetDscpRowStatus | read-create | current | RowStatus |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.23 | Tablezxr10RMAPSetRtTable | not-accessible | current | Route-map Set Rt Table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.23.1 | Rowzxr10RMAPSetRtEntry | not-accessible | current | Set Transitive Route Target extended community. If set extcommunity rt-trans remove has been setted, other types of set extcommunity can't be setted. If set ex… |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.23.1.1 | Columnzxr10RMAPSetRtName | not-accessible | current | Name of Route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.23.1.2 | Columnzxr10RMAPSetRtSequence | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.23.1.3 | Columnzxr10RMAPSetRtAsnn | not-accessible | current | VPN extended community. This config includes 3 formats. 1.ASNN(X:Y) The range of X is 0 to 65535. The range of X is 0 to 4294967295. 2.ASNDot(X.Y:Z) The range … |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.23.1.4 | Columnzxr10RMAPSetRtReOrAdd | not-accessible | current | additive Add to the existing extcommunity.Value is 6. remove Remove the existing extcommunity.Value is 7. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.23.1.100 | Columnzxr10RMAPSetRtRowStatus | read-create | current | RowStatus |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.24 | Tablezxr10RMAPSetSooTable | not-accessible | current | Route-map Set Soo Table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.24.1 | Rowzxr10RMAPSetSooEntry | not-accessible | current | Transitive Site-of-Origin extended community. If set extcommunity soo-trans remove has been setted, other types of set extcommunity can't be setted. The ASCII … |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.24.1.1 | Columnzxr10RMAPSetSooName | not-accessible | current | Name of Route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.24.1.2 | Columnzxr10RMAPSetSooSequence | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.24.1.3 | Columnzxr10RMAPSetSooAsnn | read-create | current | VPN extended community. This config includes 3 formats. 1.ASNN(X:Y) The range of X is 0 to 65535. The range of X is 0 to 4294967295. 2.ASNDot(X.Y:Z) The range … |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.24.1.4 | Columnzxr10RMAPSetSooRemove | read-create | current | Remove the existing extcommunity.Value is 7 |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.24.1.100 | Columnzxr10RMAPSetSooRowStatus | read-create | current | RowStatus |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.25 | Tablezxr10RMAPSetGlobalTable | not-accessible | current | Route-map Set Global Table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.25.1 | Rowzxr10RMAPSetGlobalEntry | not-accessible | current | Set global route for PBR. This set item sets the route-map name with ipv4 type. It conflicts with other match or set items which set the route-map name with ip… |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.25.1.1 | Columnzxr10RMAPSetGlobalName | not-accessible | current | Name of Route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.25.1.2 | Columnzxr10RMAPSetGlobalSequence | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.25.1.3 | Columnzxr10RMAPSetGlobal | read-create | current | It expresses that whether this config is setted or not. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.25.1.4 | Columnzxr10RMAPSetGlobalIPAddr | read-create | current | IP address of next hop. This attribut may be setted or not. 0 is invaid value. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.25.1.5 | Columnzxr10RMAPSetGlobalIpConst | read-create | current | If zxr10RMAPSetGlobalIPAddr is setted, this attribut should be setted with value 3 |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.25.1.6 | Columnzxr10RMAPSetGlobalNextHopConst | read-create | current | If zxr10RMAPSetGlobalIPAddr is setted, this attribut should be setted with value 1 |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.25.1.100 | Columnzxr10RMAPSetGlobalRowStatus | read-create | current | RowStatus |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.26 | Tablezxr10RMAPSetInterfaceTable | not-accessible | current | Route-map Set Interface Table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.26.1 | Rowzxr10RMAPSetInterfaceEntry | not-accessible | current | Set output interface. Each sequence has 10 set interface items at most. This set item supports these types of interface: [PORT-CLASS-OC, PORT-TYPE-OC48] [PORT-… |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.26.1.1 | Columnzxr10RMAPSetInterfaceName | not-accessible | current | Name of Route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.26.1.2 | Columnzxr10RMAPSetInterfaceSequence | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.26.1.3 | Columnzxr10RMAPSetInterface | not-accessible | current | Interface Name. Each sequence has 10 set interface items at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.26.1.100 | Columnzxr10RMAPSetInterfaceRowStatus | read-create | current | RowStatus |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.27 | Tablezxr10RMAPSetIpMetricTable | not-accessible | current | Route-map Set IpMetric Table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.27.1 | Rowzxr10RMAPSetIpMetricEntry | not-accessible | current | Set metric value for destination routing protocol. This set item sets the route-map name with ipv4 type. It conflicts with other match or set items which set t… |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.27.1.1 | Columnzxr10RMAPSetIpMetricName | not-accessible | current | Name of Route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.27.1.2 | Columnzxr10RMAPSetIpMetricSequence | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.27.1.3 | Columnzxr10RMAPSetIpMetricAct | read-create | current | plus :Add metric.Value is 1. minus:Del metric.Value is 2. unset:No Action.Value is 0. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.27.1.4 | Columnzxr10RMAPSetIpMetricValue | read-create | current | Metric value. The range of config is 0 to 4294967295 |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.27.1.100 | Columnzxr10RMAPSetIpMetricRowStatus | read-create | current | RowStatus |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.28 | Tablezxr10RMAPSetIpMetricTypeTable | not-accessible | current | Route-map Set IpMetricType Table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.28.1 | Rowzxr10RMAPSetIpMetricTypeEntry | not-accessible | current | Set type of metric for destination routing protocol. This set item sets the route-map name with ipv4 type. It conflicts with other match or set items which set… |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.28.1.1 | Columnzxr10RMAPSetIpMetricTypeName | not-accessible | current | Name of Route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.28.1.2 | Columnzxr10RMAPSetIpMetricTypeSequence | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.28.1.3 | Columnzxr10RMAPSetIpMetricType | read-create | current | external IS-IS external metric.Value is 2. internal IS-IS internal metric.Value is 1. type-1 OSPF external type 1 metric.Value is 3. type-2 OSPF external type … |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.28.1.100 | Columnzxr10RMAPSetIpMetricTypeRowStat | read-create | current | RowStatus |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.29 | Tablezxr10RMAPSetIpNextHopTable | not-accessible | current | Route-map Set IpNextHop Table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.29.1 | Rowzxr10RMAPSetIpNextHopEntry | not-accessible | current | Set Next hop address. This set item sets the route-map name with ipv4 type. It conflicts with other match or set items which set the route-map name with ipv6 t… |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.29.1.1 | Columnzxr10RMAPSetIpNextHopName | not-accessible | current | Name of Route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.29.1.2 | Columnzxr10RMAPSetIpNextHopSequence | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.29.1.3 | Columnzxr10RMAPSetIpNextHop | not-accessible | current | IP address of next hop. 0 is invalid value. Each sequence has 10 set ip next-hop items at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.29.1.4 | Columnzxr10RMAPSetIpNextHopSqa | read-create | current | Track name. This attribut may be setted or not. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.29.1.100 | Columnzxr10RMAPSetIpNextHopRowStatus | read-create | current | RowStatus |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.30 | Tablezxr10RMAPSetIpPathTable | not-accessible | current | Route-map Set IpPath Table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.30.1 | Rowzxr10RMAPSetIpPathEntry | not-accessible | current | Set output interface. This set item supports these types of interface: [PORT-CLASS-FEI,PORT-CLASS-GEI-END]. This set item sets the route-map name with ipv4 typ… |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.30.1.1 | Columnzxr10RMAPIpPathName | not-accessible | current | Name of Route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.30.1.2 | Columnzxr10RMAPIpPathSequence | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.30.1.3 | Columnzxr10RMAPSetIpPathIntf | read-create | current | Name of Interface (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.30.1.4 | Columnzxr10RMAPSetIpPathNextHop | read-create | current | IP address of next hop.0 is invalid value. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.30.1.100 | Columnzxr10RMAPSetIpPathRowStatus | read-create | current | RowStatus |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.31 | Tablezxr10RMAPSetIpPrecTable | not-accessible | current | Route-map Set IpPrec Table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.31.1 | Rowzxr10RMAPSetIpPrecEntry | not-accessible | current | Set precedence field. This set item sets the route-map name with ipv4 type. It conflicts with other match or set items which set the route-map name with ipv6 t… |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.31.1.1 | Columnzxr10RMAPSetIpPrecName | not-accessible | current | Name of Route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.31.1.2 | Columnzxr10RMAPSetIpPrecSequence | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.31.1.3 | Columnzxr10RMAPSetIpPrec | read-create | current | Precedence value. The range of config is 0 to 7. 255 is invalid value. If zxr10RMAPSetIpPrec is setted with valid value, zxr10RMAPSetIpPrecMap should be setted… |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.31.1.4 | Columnzxr10RMAPSetIpPrecMap | read-create | current | critical Set critical precedence (6) flash Set flash precedence (4) flash-override Set flash override precedence (5) immediate Set immediate precedence (3) int… |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.31.1.100 | Columnzxr10RMAPSetIpPrecRowStatus | read-create | current | RowStatus |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.32 | Tablezxr10RMAPSetIpTagTable | not-accessible | current | Route-map Set IpTag Table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.32.1 | Rowzxr10RMAPSetIpTagEntry | not-accessible | current | Set tag value for destination routing protocol. This set item sets the route-map name with ipv4 type. It conflicts with other match or set items which set the … |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.32.1.1 | Columnzxr10RMAPSetIpTagName | not-accessible | current | Name of Route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.32.1.2 | Columnzxr10RMAPSetIpTagSequence | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.32.1.3 | Columnzxr10RMAPSetIpTag | read-create | current | Set tag value for destination routing protocol. The range of config is 0 to 4294967295. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.32.1.100 | Columnzxr10RMAPSetIpTagRowStatus | read-create | current | RowStatus |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.33 | Tablezxr10RMAPSetIpTosTable | not-accessible | current | Route-map Set IpTos Table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.33.1 | Rowzxr10RMAPSetIpTosEntry | not-accessible | current | Set type of service field. This set item sets the route-map name with ipv4 type. It conflicts with other match or set items which set the route-map name with i… |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.33.1.1 | Columnzxr10RMAPSetIpTosName | not-accessible | current | Name of Route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.33.1.2 | Columnzxr10RMAPSetIpTosSequence | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.33.1.3 | Columnzxr10RMAPSetIpTos | read-create | current | Type of service value. The range of config is 0 to 15. 255 is invalid value. If zxr10RMAPSetIpTos is setted with valid value, zxr10RMAPSetIpTosMap should be se… |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.33.1.4 | Columnzxr10RMAPSetIpTosMap | read-create | current | max-reliability Set max reliable TOS (3) max-throughput Set max throughput TOS (4) min-delay Set min delay TOS (5) min-monetary-cost Set min monetary cost TOS … |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.33.1.100 | Columnzxr10RMAPSetIpTosRowStatus | read-create | current | RowStatus |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.34 | Tablezxr10RMAPSetIpv6MetricTable | not-accessible | current | Route-map Set Ipv6Metric Table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.34.1 | Rowzxr10RMAPSetIpv6MetricEntry | not-accessible | current | Set metric value for destination routing protocol. This set item sets the route-map name with ipv6 type. It conflicts with other match or set items which set t… |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.34.1.1 | Columnzxr10RMAPSetIpv6MetricName | not-accessible | current | Name of Route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.34.1.2 | Columnzxr10RMAPSetIpv6MetricSequence | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.34.1.3 | Columnzxr10RMAPSetIpv6MetricAct | read-create | current | plus :Add metric.Value is 1. minus:Del metric.Value is 2. unset:No Action.Value is 0. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.34.1.4 | Columnzxr10RMAPSetIpv6MetricValue | read-create | current | Metric value. The range of config is 0 to 4294967295. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.34.1.100 | Columnzxr10RMAPSetIpv6MetricRowStatus | read-create | current | RowStatus |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.35 | Tablezxr10RMAPSetIpv6MetricTypeTable | not-accessible | current | Route-map Set Ipv6MetricType Table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.35.1 | Rowzxr10RMAPSetIpv6MetricTypeEntry | not-accessible | current | Set type of metric for destination routing protocol. This set item sets the route-map name with ipv6 type. It conflicts with other match or set items which set… |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.35.1.1 | Columnzxr10RMAPSetIpv6MetricTypeName | not-accessible | current | Name of Route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.35.1.2 | Columnzxr10RMAPSetIpv6MetricTypeSeq | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.35.1.3 | Columnzxr10RMAPSetIpv6MetricType | read-create | current | external IS-IS external metric.Value is 2. internal IS-IS internal metric.Value is 1. type-1 OSPF external type 1 metric.Value is 3. type-2 OSPF external type … |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.35.1.100 | Columnzxr10RMAPSetIpv6MetricTypeRowSta | read-create | current | RowStatus |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.36 | Tablezxr10RMAPSetIpv6NextHopTable | not-accessible | current | Route-map Set IpNextHop Table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.36.1 | Rowzxr10RMAPSetIpv6NextHopEntry | not-accessible | current | Set Next hop address. This set item sets the route-map name with ipv6 type. It conflicts with other match or set items which set the route-map name with ipv4 t… |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.36.1.1 | Columnzxr10RMAPSetIpv6NextHopName | not-accessible | current | Name of Route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.36.1.2 | Columnzxr10RMAPSetIpv6NextHopSequence | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.36.1.3 | Columnzxr10RMAPSetIpv6NextHop | not-accessible | current | <X:X::X:X> IPv6 address of next hop. 0 is invalid value. Each sequence has 10 set ipv6 next-hop items at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.36.1.100 | Columnzxr10RMAPSetIpv6NextHopRowStatus | read-create | current | RowStatus |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.37 | Tablezxr10RMAPSetIpv6PathTable | not-accessible | current | Route-map Set Ipv6Path Table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.37.1 | Rowzxr10RMAPSetIpv6PathEntry | not-accessible | current | Set output interface. This set item supports these types of interface: [PORT-CLASS-FEI,PORT-CLASS-GEI-END]. This set item sets the route-map name with ipv6 typ… |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.37.1.1 | Columnzxr10RMAPSetIpv6PathName | not-accessible | current | Name of Route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.37.1.2 | Columnzxr10RMAPSetIpv6PathSequence | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.37.1.3 | Columnzxr10RMAPSetIpv6PathIntf | read-create | current | Name of Interface (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.37.1.4 | Columnzxr10RMAPSetIpv6PathNextHop | read-create | current | <X:X::X:X> IPv6 address of next hop.0 is invalid value. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.37.1.100 | Columnzxr10RMAPSetIpv6PathRowStatus | read-create | current | RowStatus |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.38 | Tablezxr10RMAPSetIpv6PrecTable | not-accessible | current | Route-map Set Ipv6Prec Table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.38.1 | Rowzxr10RMAPSetIpv6PrecEntry | not-accessible | current | Set precedence field. This set item sets the route-map name with ipv6 type. It conflicts with other match or set items which set the route-map name with ipv4 t… |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.38.1.1 | Columnzxr10RMAPSetIpv6precName | not-accessible | current | Name of Route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.38.1.2 | Columnzxr10RMAPSetIpv6precSequence | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.38.1.3 | Columnzxr10RMAPSetIpv6prec | read-create | current | Precedence value. 255 is invalid. The range of config is 0 to 7. If zxr10RMAPSetIpv6prec is setted with valid value, zxr10RMAPSetIpv6precMap should be setted w… |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.38.1.4 | Columnzxr10RMAPSetIpv6precMap | read-create | current | critical Set critical precedence (6) flash Set flash precedence (4) flash-override Set flash override precedence (5) immediate Set immediate precedence (3) int… |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.38.1.100 | Columnzxr10RMAPSetIpv6precRowStatus | read-create | current | RowStatus |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.39 | Tablezxr10RMAPSetIpv6TagTable | not-accessible | current | Route-map Set Ipv6Tag Table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.39.1 | Rowzxr10RMAPSetIpv6TagEntry | not-accessible | current | Set tag value for destination routing protocol. This set item sets the route-map name with ipv6 type. It conflicts with other match or set items which set the … |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.39.1.1 | Columnzxr10RMAPSetIpv6TagName | not-accessible | current | Name of Route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.39.1.2 | Columnzxr10RMAPSetIpv6TagSequence | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.39.1.3 | Columnzxr10RMAPSetIpv6Tag | read-create | current | Precedence value. The range of config is 0 to 4294967295. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.39.1.100 | Columnzxr10RMAPSetIpv6TagRowStatus | read-create | current | RowStatus |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.40 | Tablezxr10RMAPSetIpv6TrafficTable | not-accessible | current | Route-map Set Ipv6Traffic Table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.40.1 | Rowzxr10RMAPSetIpv6TrafficEntry | not-accessible | current | Set IPv6 traffic-class. This set item sets the route-map name with ipv6 type. It conflicts with other match or set items which set the route-map name with ipv4… |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.40.1.1 | Columnzxr10RMAPSetIpv6TrafficName | not-accessible | current | Name of Route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.40.1.2 | Columnzxr10RMAPSetIpv6TrafficSequence | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.40.1.3 | Columnzxr10RMAPSetIpv6Traffic | read-create | current | Value of IPv6 traffic-class. The range of config is 0 to 255. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.40.1.100 | Columnzxr10RMAPSetIpv6TrafficRowStatus | read-create | current | RowStatus |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.41 | Tablezxr10RMAPSetLevelTable | not-accessible | current | Route-map Set Level Table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.41.1 | Rowzxr10RMAPSetLevelEntry | not-accessible | current | Set where to import route |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.41.1.1 | Columnzxr10RMAPSetLevelName | not-accessible | current | Name of Route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.41.1.2 | Columnzxr10RMAPSetLevelSequence | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.41.1.3 | Columnzxr10RMAPSetLevel | read-create | current | level-1 Import into a level-1 area.Value is 1. level-1-2 Import into level-1 and level-2.Value is 3. level-2 Import into level-2 sub-domain.Value is 2. 0 is in… |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.41.1.100 | Columnzxr10RMAPSetLevelRowStatus | read-create | current | RowStatus |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.42 | Tablezxr10RMAPSetLocalPreTable | not-accessible | current | Route-map Set LocalPreference Table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.42.1 | Rowzxr10RMAPSetLocalPreEntry | not-accessible | current | Set BGP local preference path attribute. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.42.1.1 | Columnzxr10RMAPSetLocalPreName | not-accessible | current | Name of Route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.42.1.2 | Columnzxr10RMAPSetLocalPreSequence | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.42.1.3 | Columnzxr10RMAPSetLocalPre | read-create | current | Preference value. The range of config is 0 to 4294967295. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.42.1.100 | Columnzxr10RMAPSetLocalPreRowStatus | read-create | current | RowStatus |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.43 | Tablezxr10RMAPSetMplsTable | not-accessible | current | Route-map Set Mpls-label Table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.43.1 | Rowzxr10RMAPSetMplsEntry | not-accessible | current | Set MPLS label for prefix |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.43.1.1 | Columnzxr10RMAPSetMplsName | not-accessible | current | Name of Route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.43.1.2 | Columnzxr10RMAPSetMplsSequence | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.43.1.3 | Columnzxr10RMAPSetMpls | read-create | current | Set MPLS label for prefix. It expresses that whether this config is valid or not. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.43.1.100 | Columnzxr10RMAPSetMplsRowStatus | read-create | current | RowStatus |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.44 | Tablezxr10RMAPSetNextHopTable | not-accessible | current | Route-map Set NextHop Table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.44.1 | Rowzxr10RMAPSetNextHopEntry | not-accessible | current | Set IP address of next hop. It conflicts with these set items below: set vrf set global |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.44.1.1 | Columnzxr10RMAPSetNextHopName | not-accessible | current | Name of Route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.44.1.2 | Columnzxr10RMAPSetNextHopSequence | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.44.1.3 | Columnzxr10RMAPSetNextHop | not-accessible | current | IP address of next hop. 0 is invalid value. Each sequence has 10 set next-hop items at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.44.1.100 | Columnzxr10RMAPSetNextHopRowStatus | read-create | current | RowStatus |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.45 | Tablezxr10RMAPSetOriginTable | not-accessible | current | Route-map Set Origin Table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.45.1 | Rowzxr10RMAPSetOriginEntry | not-accessible | current | Set BGP origin code |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.45.1.1 | Columnzxr10RMAPSetOriginName | not-accessible | current | Name of Route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.45.1.2 | Columnzxr10RMAPSetOriginSequence | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.45.1.3 | Columnzxr10RMAPSetOrigin | read-create | current | egp Remote EGP.Value is 2. igp Local IGP.Value is 1. incomplete Unknown heritage.Value is 3. 0 is invalid value. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.45.1.100 | Columnzxr10RMAPSetOriginRowStatus | read-create | current | RowStatus |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.46 | Tablezxr10RMAPSetQosIdTable | not-accessible | current | Route-map Set QosId Table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.46.1 | Rowzxr10RMAPSetQosIdEntry | not-accessible | current | Set QoS ID of routing |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.46.1.1 | Columnzxr10RMAPSetQosIdName | not-accessible | current | Name of Route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.46.1.2 | Columnzxr10RMAPSetQosIdSequence | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.46.1.3 | Columnzxr10RMAPSetQosId | read-create | current | QoS ID. The range of config is 1 to 16000. 0 is invalid value. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.46.1.100 | Columnzxr10RMAPSetQosIdRowStatus | read-create | current | RowStatus |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.47 | Tablezxr10RMAPSetVrfTable | not-accessible | current | Route-map Set Vrf Table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.47.1 | Rowzxr10RMAPSetVrfEntry | not-accessible | current | Set virtual route forwarding name. This set item sets the route-map name with ipv4 type. It conflicts with other match or set items which set the route-map nam… |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.47.1.1 | Columnzxr10RMAPSetVrfName | not-accessible | current | Name of Route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.47.1.2 | Columnzxr10RMAPSetVrfSequence | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.47.1.3 | Columnzxr10RMAPSetVrf | read-create | current | Virtual route forwarding name |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.47.1.4 | Columnzxr10RMAPSetVrfNextHop | read-create | current | IP address of next hop. 0 is invalid value. This attribut may be setted or not. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.47.1.5 | Columnzxr10RMAPSetVrfSqa | read-create | current | Track name. This attribut may be setted or not. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.47.1.6 | Columnzxr10RMAPSetVrfIpConst | read-create | current | If zxr10RMAPSetVrfNextHop is setted, this attribute should be setted with value 1. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.47.1.7 | Columnzxr10RMAPSetVrfNextHopConst | read-create | current | If zxr10RMAPSetVrfNextHop is setted, this attribute should be setted with value 2. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.47.1.100 | Columnzxr10RMAPSetVrfRowStatus | read-create | current | RowStatus |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.48 | Tablezxr10RMAPMatchAsLenTable | not-accessible | current | Route-map Match As-path-length Table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.48.1 | Rowzxr10RMAPMatchAsLenEntry | not-accessible | current | Match BGP as-path-length |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.48.1.1 | Columnzxr10RMAPMatchAsLenName | not-accessible | current | Name of Route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.48.1.2 | Columnzxr10RMAPMatchAsLenSequence | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.48.1.3 | Columnzxr10RMAPMatchAsLenAlg | read-create | current | eq Equal as-path length to be matched.Value is 1. ge Minimum as-path length to be matched.Value is 2. le Maximun as-path length to be matched.Value is 3. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.48.1.4 | Columnzxr10RMAPMatchAsLen | read-create | current | As-path length. The range of config is 0 to 255. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.48.1.100 | Columnzxr10RMAPMatchAsLenRowStatus | read-create | current | RowStatus |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.49 | Tablezxr10RMAPMatchAsUnqLenTable | not-accessible | current | Route-map Match As-path-unique-length Table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.49.1 | Rowzxr10RMAPMatchAsUnqLenEntry | not-accessible | current | Match BGP as-path-unique-length |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.49.1.1 | Columnzxr10RMAPMatchAsUnqLenName | not-accessible | current | Name of Route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.49.1.2 | Columnzxr10RMAPMatchAsUnqLenSequence | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.49.1.3 | Columnzxr10RMAPMatchAsUnqLenAlg | read-create | current | eq Equal as-path length to be matched.Value is 1. ge Minimum as-path length to be matched.Value is 2. le Maximun as-path length to be matched.Value is 3. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.49.1.4 | Columnzxr10RMAPMatchAsUnqLen | read-create | current | As-path unique length. The range of config is 0 to 255. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.49.1.100 | Columnzxr10RMAPMatchAsUnqLenRowStatus | read-create | current | RowStatus |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.50 | Tablezxr10RMAPMatchIpSourceAclTable | not-accessible | current | Route-map Match IpSource Table(match ip source by acl). |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.50.1 | Rowzxr10RMAPMatchIpSourceAclEntry | not-accessible | current | Match source ip address of route or match packet. This match item sets the route-map name with ipv4 type. It conflicts with other match or set items which set … |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.50.1.1 | Columnzxr10RMAPMatchSourceAclName | not-accessible | current | Name of Route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.50.1.2 | Columnzxr10RMAPMatchSourceAclSequence | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.50.1.3 | Columnzxr10RMAPSourceAclName | not-accessible | current | Name of an access-list(1-31 characters). Each sequence has 10 match ip source items at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.50.1.4 | Columnzxr10RMAPSourceIsConfigAcl | not-accessible | current | It expresses that this config is match ip source by acl. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.50.1.100 | Columnzxr10RMAPMatchSourceAclRowStatus | read-create | current | RowStatus |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.51 | Tablezxr10RMAPMatchIpSourcePflTable | not-accessible | current | Route-map Match IpSource Table(match ip source by pfl) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.51.1 | Rowzxr10RMAPMatchIpSourcePflEntry | not-accessible | current | Match Source ip address of route or match packet. This match item sets the route-map name with ipv4 type. It conflicts with other match or set items which set … |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.51.1.1 | Columnzxr10RMAPMatchSourcePflName | not-accessible | current | Name of Route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.51.1.2 | Columnzxr10RMAPMatchSourcePflSequence | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.51.1.3 | Columnzxr10RMAPSourcePflName | not-accessible | current | Name of a prefix list (1-31 characters). Each sequence has 10 match ip source items at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.51.1.4 | Columnzxr10RMAPSourceIsConfigPfl | not-accessible | current | It expresses that this config is match ip source by pfl. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.51.1.100 | Columnzxr10RMAPMatchSourcePflRowStatus | read-create | current | RowStatus |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.52 | Tablezxr10RMAPMatchLocalPrefTable | not-accessible | current | Route-map Match local-preference Table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.52.1 | Rowzxr10RMAPMatchLocalPrefEntry | not-accessible | current | Match BGP local preference path attribute |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.52.1.1 | Columnzxr10RMAPMatchLocalPrefName | not-accessible | current | Name of Route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.52.1.2 | Columnzxr10RMAPMatchLocalPrefSequence | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.52.1.3 | Columnzxr10RMAPMatchLocalPrefAlg | read-create | current | eq Equal as-path length to be matched.Value is 1. ge Minimum as-path length to be matched.Value is 2. le Maximun as-path length to be matched.Value is 3. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.52.1.4 | Columnzxr10RMAPMatchLocalPref | read-create | current | Preference value. The range of config is 0 to 4294967295. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.52.1.100 | Columnzxr10RMAPMatchLocalPrefRowStatus | read-create | current | RowStatus |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.53 | Tablezxr10RMAPMatchOriginTable | not-accessible | current | Route-map Match Origin Table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.53.1 | Rowzxr10RMAPMatchOriginEntry | not-accessible | current | Match BGP origin code |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.53.1.1 | Columnzxr10RMAPMatchOriginName | not-accessible | current | Name of Route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.53.1.2 | Columnzxr10RMAPMatchOriginSequence | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.53.1.3 | Columnzxr10RMAPMatchOrigin | read-create | current | egp Remote EGP.Value is 2. igp Local IGP.Value is 1. incomplete Unknown heritage.Value is 3. 0 is invalid value. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.53.1.100 | Columnzxr10RMAPMatchOriginRowStatus | read-create | current | RowStatus |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.54 | Tablezxr10RMAPSetPathSelTable | not-accessible | current | Route-map Set Path-selection Table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.54.1 | Rowzxr10RMAPSetPathSelEntry | not-accessible | current | Set BGP path-selection |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.54.1.1 | Columnzxr10RMAPSetPathSelName | not-accessible | current | Name of Route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.54.1.2 | Columnzxr10RMAPSetPathSelSequence | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.54.1.3 | Columnzxr10RMAPSetPathSelPath | read-create | current | all Path for imitating iBGP full-mesh.Value is 1. backup Path for rapid convergence.Value is 2. best-path Path for load sharing.Value is 3. group-best Path for… |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.54.1.4 | Columnzxr10RMAPSetPathSelNum | read-create | current | Path numbers. The range of config is 1 to 32. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.54.1.5 | Columnzxr10RMAPSetPathSelInstall | read-create | current | Manner of sending to forwarding table. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.54.1.6 | Columnzxr10RMAPSetPathSelMulpro | read-create | current | Manner of sending to forwarding table. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.54.1.7 | Columnzxr10RMAPSetPathSelAdvertise | read-create | current | Advertising the path selected outward. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.54.1.100 | Columnzxr10RMAPSetPathSelRowStatus | read-create | current | RowStatus |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.55 | Tablezxr10RMAPSetPolicyPrioTable | not-accessible | current | Route-map Set Policy-priority Table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.55.1 | Rowzxr10RMAPSetPolicyPrioEntry | not-accessible | current | Set policy priority for PBR |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.55.1.1 | Columnzxr10RMAPSetPolicyPrioName | not-accessible | current | Name of Route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.55.1.2 | Columnzxr10RMAPSetPolicyPrioSequence | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.55.1.3 | Columnzxr10RMAPSetPolicyPrio | read-create | current | Value of policy priority. The range of config is 0 to 7. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.55.1.100 | Columnzxr10RMAPSetPolicyPrioRowStatus | read-create | current | RowStatus |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.56 | Tablezxr10RMAPMatchIpAlgMetricTable | not-accessible | current | Route-map Match Ip Metric Table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.56.1 | Rowzxr10RMAPMatchIpAlgMetricEntry | not-accessible | current | Match address of route or match packet. This match item sets the route-map with ipv4 type. It conflicts with other match or set items which set the route-map n… |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.56.1.1 | Columnzxr10RMAPMatchIpAlgMetricName | not-accessible | current | Name of Route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.56.1.2 | Columnzxr10RMAPMatchIpAlgMetricSeq | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.56.1.3 | Columnzxr10RMAPMatchIpAlgMetricAlg | read-create | current | eq Equal matric length to be matched.Value is 1. ge Minimum matric length to be matched.Value is 2. le Maximun matric length to be matched.Value is 3. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.56.1.4 | Columnzxr10RMAPMatchIpAlgMetric | read-create | current | Metric value. The range of config is 0 to 4294967295. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.56.1.100 | Columnzxr10RMAPIpAlgMetricRowStatus | read-create | current | RowStatus |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.57 | Tablezxr10RMAPMatchIpv6AlgMetricTable | not-accessible | current | Route-map Match Ipv6 Metric Table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.57.1 | Rowzxr10RMAPMatchIpv6AlgMetricEntry | not-accessible | current | Match address of route or match packet. This match item sets the route-map with ipv6 type. It conflicts with other match or set items which set the route-map n… |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.57.1.1 | Columnzxr10RMAPMatchIpv6AlgMetricName | not-accessible | current | Name of Route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.57.1.2 | Columnzxr10RMAPMatchIpv6AlgMetricSeq | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.57.1.3 | Columnzxr10RMAPMatchIpv6AlgMetricAlg | read-create | current | eq Equal matric length to be matched.Value is 1. ge Minimum matric length to be matched.Value is 2. le Maximun matric length to be matched.Value is 3. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.57.1.4 | Columnzxr10RMAPMatchIpv6AlgMetric | read-create | current | Metric value. The range of config is 0 to 4294967295. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.57.1.100 | Columnzxr10RMAPIpv6AlgMetricRowStatus | read-create | current | RowStatus |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.58 | Tablezxr10RMAPSetTraffIdxTable | not-accessible | current | Route-map Set Traffic-index Table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.58.1 | Rowzxr10RMAPSetTraffIdxEntry | not-accessible | current | Set BGP traffic index |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.58.1.1 | Columnzxr10RMAPSetTraffIdxName | not-accessible | current | Name of Route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.58.1.2 | Columnzxr10RMAPSetTraffIdxSequence | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.58.1.3 | Columnzxr10RMAPSetTraffIdx | read-create | current | Traffic-index number. The range of config is 1 to 63. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.58.1.100 | Columnzxr10RMAPSetTraffIdxRowStatus | read-create | current | RowStatus |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.59 | Tablezxr10RMAPMatchIpv6AddrPflTable | not-accessible | current | Route-map Match Ipv6Address pfl Table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.59.1 | Rowzxr10RMAPMatchIpv6AddrPflEntry | not-accessible | current | Match address of route or match packet. This match item sets the route-map name with ipv6 type. It conflicts with other match or set items which set the route-… |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.59.1.1 | Columnzxr10RMAPIpv6AddrPflName | not-accessible | current | Name of Route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.59.1.2 | Columnzxr10RMAPIpv6AddrPflSequence | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.59.1.3 | Columnzxr10RMAPIpv6AddrPfl | not-accessible | current | Name of an access-list(1-31 characters). Each sequence has 10 match ipv6 address items at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.59.1.4 | Columnzxr10RMAPIpv6IsConfigPfl | not-accessible | current | It expresses that this config is match ipv6 address by pfl. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.59.1.100 | Columnzxr10RMAPIpv6AddrPflRowStatus | read-create | current | RowStatus |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.60 | Tablezxr10RMAPSetNextHopPeerAddrTable | not-accessible | current | Route-map Set NextHop Table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.60.1 | Rowzxr10RMAPSetNextHopPeerAddrEntry | not-accessible | current | Set IP address of next hop. It conflicts with these set items below: set vrf set global |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.60.1.1 | Columnzxr10RMAPSetNextHopPeerAddrName | not-accessible | current | Name of Route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.60.1.2 | Columnzxr10RMAPSetNextHopPeerAddrSeq | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.60.1.3 | Columnzxr10RMAPSetNextHopAddr | not-accessible | current | IP address of next hop. 0 is invalid value. Each sequence has 10 set next-hop items at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.60.1.4 | Columnzxr10RMAPSetNextHopPeerAddr | not-accessible | current | Peer address for BGP. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.60.1.100 | Columnzxr10RMAPSetNHorPeerAddRowStatus | read-create | current | RowStatus |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.61 | Tablezxr10RMAPSetIpv6NHorPeerAddTable | not-accessible | current | Route-map Set IpNextHop Table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.61.1 | Rowzxr10RMAPSetIpv6NHorPeerAddEntry | not-accessible | current | Set Next hop address. This set item sets the route-map name with ipv6 type. It conflicts with other match or set items which set the route-map name with ipv4 t… |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.61.1.1 | Columnzxr10RMAPSetIpv6NHorPeerAddName | not-accessible | current | Name of Route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.61.1.2 | Columnzxr10RMAPSetIpv6NHorPeerAddSeq | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.61.1.3 | Columnzxr10RMAPSetIpv6NextHopAddr | not-accessible | current | <X:X::X:X> IPv6 address of next hop. 0 is invalid value. Each sequence has 10 set ipv6 next-hop items at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.61.1.4 | Columnzxr10RMAPSetIpv6NextHopPeerAddr | not-accessible | current | Peer address for BGP. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.61.1.100 | Columnzxr10RMAPSetv6NHorPeerRowStatus | read-create | current | RowStatus |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.62 | Tablezxr10RMAPMatchEvpnTable | not-accessible | current | Route-map match EVPN table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.62.1 | Rowzxr10RMAPMatchEvpnEntry | not-accessible | current | Match BGP EVPN route |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.62.1.1 | Columnzxr10RMAPMatchEvpnName | not-accessible | current | Name of route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.62.1.2 | Columnzxr10RMAPMatchEvpnSequence | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.62.1.3 | Columnzxr10RMAPMatchEvpn | not-accessible | current | EVPN route type. 1: Ethernet Auto-Discovery (A-D) route; 2: MAC/IP Advertisement route; 3: Inclusive Multicast Ethernet Tag route; 4: Ethernet Segment route; 5… |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.62.1.100 | Columnzxr10RMAPMatchEvpnRowStatus | read-create | current | Row status |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.63 | Tablezxr10RMAPBlackHoleRouteTable | not-accessible | current | Route-map black hole route table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.63.1 | Rowzxr10RMAPBlackHoleRouteEntry | not-accessible | current | Black hole route which outcoming interface is null. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.63.1.1 | Columnzxr10RMAPBlackHoleRouteName | not-accessible | current | Name of route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.63.1.2 | Columnzxr10RMAPBlackHoleRouteSequence | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.63.1.3 | Columnzxr10RMAPBlackHoleRouteEnable | read-create | current | Black hole route enable. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.63.1.100 | Columnzxr10RMAPBlackHoleRouteRowStatus | read-create | current | Row status |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.64 | Tablezxr10RMAPDefaultRouteTable | not-accessible | current | Route-map default route table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.64.1 | Rowzxr10RMAPDefaultRouteEntry | not-accessible | current | Default route |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.64.1.1 | Columnzxr10RMAPDefaultRouteName | not-accessible | current | Name of route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.64.1.2 | Columnzxr10RMAPDefaultRouteSequence | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.64.1.3 | Columnzxr10RMAPDefaultRouteEnable | read-create | current | Default route enable. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.64.1.100 | Columnzxr10RMAPDefaultRouteRowStatus | read-create | current | Row status |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.65 | Tablezxr10RMAPStrictPolicyTable | not-accessible | current | Route-map strict policy table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.65.1 | Rowzxr10RMAPStrictPolicyEntry | not-accessible | current | Strict policy |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.65.1.1 | Columnzxr10RMAPStrictPolicyName | not-accessible | current | Name of route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.65.1.2 | Columnzxr10RMAPStrictPolicySequence | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.65.1.3 | Columnzxr10RMAPStrictPolicyEnable | read-create | current | Strict policy enable. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.65.1.100 | Columnzxr10RMAPStrictPolicyRowStatus | read-create | current | Row status |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.66 | Tablezxr10RMAPSetPathListTable | not-accessible | current | Route-map set IPv4 path list table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.66.1 | Rowzxr10RMAPSetPathListEntry | not-accessible | current | Set output interfaces. This set item supports these types of interface: [PORT-CLASS-FEI,PORT-CLASS-GEI-END]. This set item sets the route-map name with IPv4 ty… |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.66.1.1 | Columnzxr10RMAPSetPathListName | not-accessible | current | Name of route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.66.1.2 | Columnzxr10RMAPSetPathListSequence | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.66.1.3 | Columnzxr10RMAPSetPathListIntf | not-accessible | current | Name of interface (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.66.1.4 | Columnzxr10RMAPSetPathListNextHop | not-accessible | current | IP address of next hop.0 is invalid value. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.66.1.100 | Columnzxr10RMAPSetPathListRowStatus | read-create | current | Row status |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.67 | Tablezxr10RMAPSetPathList6Table | not-accessible | current | Route-map set Ipv6 path list table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.67.1 | Rowzxr10RMAPSetPathList6Entry | not-accessible | current | Set output interface. This set item supports these types of interface: [PORT-CLASS-FEI,PORT-CLASS-GEI-END]. This set item sets the route-map name with ipv6 typ… |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.67.1.1 | Columnzxr10RMAPSetPathList6Name | not-accessible | current | Name of route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.67.1.2 | Columnzxr10RMAPSetPathList6Sequence | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.67.1.3 | Columnzxr10RMAPSetPathList6Intf | not-accessible | current | Name of interface (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.67.1.4 | Columnzxr10RMAPSetPathList6NextHop | not-accessible | current | <X:X::X:X> IPv6 address of next hop.0 is invalid value. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.67.1.100 | Columnzxr10RMAPSetPathList6RowStatus | read-create | current | Row status |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.68 | Tablezxr10RMAPSetVxlanTunnelSrcTable | not-accessible | current | Route-map set VXLAN tunnel source table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.68.1 | Rowzxr10RMAPSetVxlanTunnelSrcEntry | not-accessible | current | Route-map set VXLAN tunnel source entry |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.68.1.1 | Columnzxr10RMAPSetVxlanTunnelSrcName | not-accessible | current | Name of route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.68.1.2 | Columnzxr10RMAPSetVxlanTunnelSrcSeq | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.68.1.3 | Columnzxr10RMAPSetVxlanTunnelSrcAddr | read-create | current | IP address of VXLAN tunnel source. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.68.1.100 | Columnzxr10RMAPVxlanTunnelSrcRowStatus | read-create | current | Row status |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.69 | Tablezxr10RMAPSetEvpnMacIntfTable | not-accessible | current | Route-map set EVPN router's MAC interface table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.69.1 | Rowzxr10RMAPSetEvpnMacIntfEntry | not-accessible | current | Route-map set EVPN router's MAC interface entry |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.69.1.1 | Columnzxr10RMAPSetEvpnMacIntfName | not-accessible | current | Name of route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.69.1.2 | Columnzxr10RMAPSetEvpnMacIntfSequence | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.69.1.3 | Columnzxr10RMAPSetEvpnMacIntf | read-create | current | Name of interface (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.69.1.100 | Columnzxr10RMAPSetEvpnMacIntfRowStatus | read-create | current | Row status |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.70 | Tablezxr10RMAPSetL2vniLabelTable | not-accessible | current | Route-map set l2-vni label table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.70.1 | Rowzxr10RMAPSetL2vniLabelEntry | not-accessible | current | Route-map set l2-vni label entry |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.70.1.1 | Columnzxr10RMAPSetL2vniLabelName | not-accessible | current | Name of route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.70.1.2 | Columnzxr10RMAPSetL2vniLabelSequence | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.70.1.3 | Columnzxr10RMAPSetL2vniLabel | read-create | current | The value of l2-vni label. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.70.1.100 | Columnzxr10RMAPSetL2vniLabelRowStatus | read-create | current | Row status |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.71 | Tablezxr10RMAPSetL3vniLabelTable | not-accessible | current | Route-map set l3-vni label table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.71.1 | Rowzxr10RMAPSetL3vniLabelEntry | not-accessible | current | Route-map set l3-vni label entry |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.71.1.1 | Columnzxr10RMAPSetL3vniLabelName | not-accessible | current | Name of route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.71.1.2 | Columnzxr10RMAPSetL3vniLabelSequence | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.71.1.3 | Columnzxr10RMAPSetL3vniLabel | read-create | current | The value of l3-vni label. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.71.1.100 | Columnzxr10RMAPSetL3vniLabelRowStatus | read-create | current | Row status |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.72 | Tablezxr10RMAPMatchL3VniLabelTable | not-accessible | current | Route-map match l3-vni label table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.72.1 | Rowzxr10RMAPMatchL3VniLabelEntry | not-accessible | current | Route-map match l3-vni label entry |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.72.1.1 | Columnzxr10RMAPMatchL3VniLabelName | not-accessible | current | Name of route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.72.1.2 | Columnzxr10RMAPMatchL3VniLabelSequence | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.72.1.3 | Columnzxr10RMAPMatchL3VniLabel | read-create | current | The value of l3-vni label. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.72.1.100 | Columnzxr10RMAPMatchL3VniLabelStatus | read-create | current | Row status |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.73 | Tablezxr10RMAPMatchL2VniLabelTable | not-accessible | current | Route-map match l2-vni label table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.73.1 | Rowzxr10RMAPMatchL2VniLabelEntry | not-accessible | current | Route-map match l2-vni label entry |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.73.1.1 | Columnzxr10RMAPMatchL2VniLabelName | not-accessible | current | Name of route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.73.1.2 | Columnzxr10RMAPMatchL2VniLabelSequence | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.73.1.3 | Columnzxr10RMAPMatchL2VniLabel | read-create | current | The value of l2-vni label. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.73.1.100 | Columnzxr10RMAPMatchL2VniLabelStatus | read-create | current | Row status |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.74 | Tablezxr10RMAPMatchPlyRtIdTable | not-accessible | current | Route-map match policy-route-id table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.74.1 | Rowzxr10RMAPMatchPlyRtIdEntry | not-accessible | current | Route-map match policy-route-id entry |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.74.1.1 | Columnzxr10RMAPMatchPlyRtIdName | not-accessible | current | Name of route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.74.1.2 | Columnzxr10RMAPMatchPlyRtIdSequence | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.74.1.3 | Columnzxr10RMAPMatchPlyRtId | not-accessible | current | The value of policy-route-id. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.74.1.4 | Columnzxr10RMAPMatchPlyRtIdDeriction | not-accessible | current | The deriction of policy-route-id. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.74.1.100 | Columnzxr10RMAPMatchPlyRtIdStatus | read-create | current | Row status |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.75 | Tablezxr10RMAPMatchIpv6PlyRtIdTable | not-accessible | current | Route-map match ipv6 policy-route-id table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.75.1 | Rowzxr10RMAPMatchIpv6PlyRtIdEntry | not-accessible | current | Route-map match ipv6 policy-route-id entry |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.75.1.1 | Columnzxr10RMAPMatchIpv6PlyRtIdName | not-accessible | current | Name of route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.75.1.2 | Columnzxr10RMAPMatchIpv6PlyRtIdSeq | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.75.1.3 | Columnzxr10RMAPMatchIpv6PlyRtId | not-accessible | current | The value of policy-route-id. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.75.1.4 | Columnzxr10RMAPMatchIpv6PlyRtIdDerict | not-accessible | current | The deriction of policy-route-id. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.75.1.100 | Columnzxr10RMAPMatchIpv6PlyRtIdStatus | read-create | current | Row status |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.76 | Tablezxr10RMAPSetPlyRtIdTable | not-accessible | current | Route-map set policy-route-id table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.76.1 | Rowzxr10RMAPSetPlyRtIdEntry | not-accessible | current | Route-map set policy-route-id entry |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.76.1.1 | Columnzxr10RMAPSetPlyRtIdName | not-accessible | current | Name of route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.76.1.2 | Columnzxr10RMAPSetPlyRtIdSequence | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.76.1.3 | Columnzxr10RMAPSetPlyRtId | read-create | current | The value of policy-route-id. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.76.1.100 | Columnzxr10RMAPSetPlyRtIdStatus | read-create | current | Row status |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.77 | Tablezxr10RMAPSetMonitorGroupIdTable | not-accessible | current | Route-map set monitor-group-id table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.77.1 | Rowzxr10RMAPSetMonitorGroupIdEntry | not-accessible | current | Route-map set monitor-group-id entry |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.77.1.1 | Columnzxr10RMAPSetMonitorGroupIdName | not-accessible | current | Name of route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.77.1.2 | Columnzxr10RMAPSetMonitorGroupIdSeq | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.77.1.3 | Columnzxr10RMAPSetMonitorGroupId | read-create | current | The value of policy-route-id. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.77.1.100 | Columnzxr10RMAPSetMonitorGroupIdStatus | read-create | current | Row status |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.78 | Tablezxr10RMAPLoadShareTable | not-accessible | current | Route-map load share table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.78.1 | Rowzxr10RMAPLoadShareEntry | not-accessible | current | Load share |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.78.1.1 | Columnzxr10RMAPLoadShareName | not-accessible | current | Name of route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.78.1.2 | Columnzxr10RMAPLoadShareSequence | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.78.1.3 | Columnzxr10RMAPLoadShareEnable | read-create | current | Load share enable. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.78.1.100 | Columnzxr10RMAPLoadShareStatus | read-create | current | Row status |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.79 | Tablezxr10RMAPContinueTable | not-accessible | current | Route-map continue table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.79.1 | Rowzxr10RMAPContinueEntry | not-accessible | current | Route-map continue entry |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.79.1.1 | Columnzxr10RMAPContinueName | not-accessible | current | Name of route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.79.1.2 | Columnzxr10RMAPContinueSequence | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.79.1.3 | Columnzxr10RMAPContinue | read-create | current | The value of continue sequence. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.79.1.4 | Columnzxr10RMAPContinueNext | read-create | current | Continue next. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.79.1.100 | Columnzxr10RMAPContinueStatus | read-create | current | Row status |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.80 | Tablezxr10RMAPTimeRangeTable | not-accessible | current | Route-map Match IpNextHop Table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.80.1 | Rowzxr10RMAPTimeRangeEntry | not-accessible | current | Route-map time range. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.80.1.1 | Columnzxr10RMAPTimeRangeName | not-accessible | current | Name of Route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.80.1.2 | Columnzxr10RMAPTimeRangeSequence | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.80.1.3 | Columnzxr10RMAPTimeRange | read-create | current | Name of time range(1-31 characters). |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.80.1.100 | Columnzxr10RMAPTimeRangeStatus | read-create | current | RowStatus |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.81 | Tablezxr10RMAPSetCommunityNameTable | not-accessible | current | Route-map Set Community Table |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.81.1 | Rowzxr10RMAPSetCommunityNameEntry | not-accessible | current | Set BGP community name. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.81.1.1 | Columnzxr10RMAPSetCommunityName | not-accessible | current | Name of Route-map (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.81.1.2 | Columnzxr10RMAPSetCommunitySequence | not-accessible | current | The sequence of a route-map. The range of config is 0 to 65535. Each name of route-map has 100 sequences at most. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.81.1.3 | Columnzxr10RMAPSetCommunityIsAddtive | not-accessible | current | additive Add to the existing community. Value is 5. |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.81.1.4 | Columnzxr10RMAPSetCommunityListName | not-accessible | current | Community list name (1-31 characters) |
| 1.3.6.1.4.1.3902.3.6000.604.2.1.81.1.100 | Columnzxr10RMAPSetCommunityRowStatus | read-create | current | RowStatus |
| 1.3.6.1.4.1.3902.3.6000.604.3 | Nodezxr10RMAPNotifications | |||
| 1.3.6.1.4.1.3902.3.6000.604.4 | Nodezxr10RMAPConformance |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| RmapMatchAlg | INTEGER{eq(1),ge(2),le(3)} | current | eq = 1,ge = 2,le = 3. |
| RmapMatchRouteType | INTEGER{local(1),internal(2),level-1(3),level-2(4),external(5), type-1(6),type-2(7),ebgp(8),ibgp(9),static(10),bgp-agg(11)} | current | local Locally generated route.Value is 1. internal Internal route (including OSPF intra/inter area).Value is 2. level-1 IS-IS level-1 route.Value is 3. level-2 IS-IS level-2 route.Value is 4. external External route (OS… |
| RmapPermitDeny | INTEGER{permit(1),deny(2)} | current | permit = 0,deny = 1. |
| RmapPrependReplace | INTEGER{prepend(1),replace(2)} | current | prepend = 1,replace = 2. |
| RmapSetComm | INTEGER{no-export(1),no-advertise(2),no-export-subconfed(3), internet(4),additive(5),none(6)} | current | additive Add to the existing community. Value is 5. internet Internet(Well known community). Value is 4. no-advertise Do not advertise to any peer. Value is 2. no-export Do not export to next AS. Value is 1. no-export-s… |
| RmapSetGlobalIpConst | INTEGER{ipconst(3)} | current | The Value is 3. |
| RmapSetGlobalNextHopConst | INTEGER{nexthopconst(1)} | current | The Value is 1. |
| RmapSetLevel | INTEGER{level-1(1),level-2(2),level-1-2(3)} | current | level-1 Import into a level-1 area level-1-2 Import into level-1 and level-2 level-2 Import into level-2 sub-domain |
| RmapSetMetricAct | INTEGER{plus(1),minus(2)} | current | plus(+) = 1,minus(-) = 2. |
| RmapSetMetricType | INTEGER{internal(1),external(2),type-1(3),type-2(4)} | current | external IS-IS external metric internal IS-IS internal metric type-1 OSPF external type 1 metric type-2 OSPF external type 2 metric |
| RmapSetOrigin | INTEGER{igp(1),egp(2),incomplete(3)} | current | egp(1) Remote EGP igp(0) Local IGP incomplete(2) Unknown heritage |
| RmapSetPath | INTEGER{all(1),backup(2),best-path(3),group-best(4)} | current | all Path for imitating iBGP full-mesh backup Path for rapid convergence best-path Path for load sharing group-best Path for elimination of routing oscillation |
| RmapSetPathAdvertise | INTEGER{advertise(3)} | current | The Value is 3. |
| RmapSetPathInstall | INTEGER{install(1)} | current | The Value is 1. |
| RmapSetPathMulpro | INTEGER{multipath-protect(2)} | current | The Value is 2. |
| RmapSetPrec | INTEGER{routine(1),priority(2),immediate(3), flash(4),flash-override(5),critical(6),internet(7),network(8)} | current | critical Set critical precedence (6) flash Set flash precedence (4) flash-override Set flash override precedence (5) immediate Set immediate precedence (3) internet Set internetwork control precedence (7) network Set ne… |
| RmapSetRt | INTEGER{additive(6),remove(7)} | current | additive Add to the existing extcommunity.Value is 6. remove Remove the existing extcommunity.Value is 7. |
| RmapSetTos | INTEGER{normal(1),min-monetary-cost(2),max-reliability(3),max-throughput(4),min-delay(5)} | current | max-reliability Set max reliable TOS (3) max-throughput Set max throughput TOS (4) min-delay Set min delay TOS (5) min-monetary-cost Set min monetary cost TOS (2) normal Set normal TOS (1) |
| RmapSetVrfIpConst | INTEGER{vrfipconst(1)} | current | The Value is 1. |
| RmapSetVrfNextHopConst | INTEGER{vrfnexthopconst(2)} | current | The Value is 2. |