ZXR10-TWAMP-MIB
88 objects
ZXROS SMI MIB
Imported Objects
| SNMPv2-SMI | Counter32 Counter64 enterprises IpAddress MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3902 | Nodezte | |||
| 1.3.6.1.4.1.3902.3 | Nodezxr10 | |||
| 1.3.6.1.4.1.3902.3.6000 | NodetwampMib | |||
| 1.3.6.1.4.1.3902.3.6000.134 | Identityzxr10twampMIB | ZXROS SMI MIB | ||
| 1.3.6.1.4.1.3902.3.6000.134.1 | Tablezxr10twampConnectionTable | not-accessible | current | The configuration table of TWAMP connection. |
| 1.3.6.1.4.1.3902.3.6000.134.1.1 | Rowzxr10twampConnectionEntry | not-accessible | current | An entry containing configuration informations which apply to the particular connection of TWAMP. |
| 1.3.6.1.4.1.3902.3.6000.134.1.1.1 | Columnzxr10twampConnectionId | not-accessible | current | Connection ID used to identify the TWAMP connection. |
| 1.3.6.1.4.1.3902.3.6000.134.1.1.2 | Columnzxr10twampConnectionSvrAddress | read-create | current | The server IP address which is specified by TWAMP connection. |
| 1.3.6.1.4.1.3902.3.6000.134.1.1.3 | Columnzxr10twampConnectionSvrPort | read-create | current | The server TCP port which is specified by TWAMP connection. |
| 1.3.6.1.4.1.3902.3.6000.134.1.1.4 | Columnzxr10twampConnectionVrfName | read-create | current | The VRF name of TWAMP connection. |
| 1.3.6.1.4.1.3902.3.6000.134.1.1.5 | Columnzxr10twampConnectionReCount | read-create | current | The failed repetition number of TWAMP connection.(default :10) |
| 1.3.6.1.4.1.3902.3.6000.134.1.1.6 | Columnzxr10twampConnectionReInterval | read-create | current | The failed repetition interval of TWAMP connection.(default :30s) |
| 1.3.6.1.4.1.3902.3.6000.134.1.1.7 | Columnzxr10twampConnectionRowStatus | read-create | current | Row status |
| 1.3.6.1.4.1.3902.3.6000.134.2 | Tablezxr10twampSessionTable | not-accessible | current | The configuration table of TWAMP session. |
| 1.3.6.1.4.1.3902.3.6000.134.2.1 | Rowzxr10twampSessionEntry | not-accessible | current | An entry containing configuration informations which apply to the particular session of TWAMP. |
| 1.3.6.1.4.1.3902.3.6000.134.2.1.1 | Columnzxr10twampSessionConnectionId | not-accessible | current | The connection ID applies to the session of TWAMP. |
| 1.3.6.1.4.1.3902.3.6000.134.2.1.2 | Columnzxr10twampSessionId | not-accessible | current | The identity of the TWAMP session. |
| 1.3.6.1.4.1.3902.3.6000.134.2.1.3 | Columnzxr10twampSessionSenderAddress | read-create | current | The sender IP address of TWAMP session. |
| 1.3.6.1.4.1.3902.3.6000.134.2.1.4 | Columnzxr10twampSessionSenderPort | read-create | current | The sender UDP port of TWAMP session. |
| 1.3.6.1.4.1.3902.3.6000.134.2.1.5 | Columnzxr10twampSessionRcvAddress | read-create | current | The receiver IP address of TWAMP session. |
| 1.3.6.1.4.1.3902.3.6000.134.2.1.6 | Columnzxr10twampSessionRcvPort | read-create | current | The receiver UDP port of TWAMP session. |
| 1.3.6.1.4.1.3902.3.6000.134.2.1.7 | Columnzxr10twampSessionVrfName | read-create | current | The VRF name of TWAMP session. |
| 1.3.6.1.4.1.3902.3.6000.134.2.1.8 | Columnzxr10twampSessionDetectPath | read-create | current | The detect path type of TWAMP session.(default :down) |
| 1.3.6.1.4.1.3902.3.6000.134.2.1.9 | Columnzxr10twampSessionInboundIf | read-create | current | The inbound-interface of TWAMP session, and it applies to condition when the detect path type is up. |
| 1.3.6.1.4.1.3902.3.6000.134.2.1.10 | Columnzxr10twampSessionDscp | read-create | current | The DSCP value of TWAMP session.(default :0) |
| 1.3.6.1.4.1.3902.3.6000.134.2.1.11 | Columnzxr10twampSessionPaddinglength | read-create | current | The length of packet padding, and the upper limit of this parameter depends on the device.(default :27bytes) |
| 1.3.6.1.4.1.3902.3.6000.134.2.1.12 | Columnzxr10twampSessionTimeOut | read-create | current | Timeout ranges from 1s to 10s. Within this time, the server needs to reflect the test message, otherwise the message is discarded.(default :5s) |
| 1.3.6.1.4.1.3902.3.6000.134.2.1.13 | Columnzxr10twampSessionDurationMode | read-create | current | The sending packet mode: continuous:In this mode,the test packets will always be sent until the user stops. packets:In this mode,the test will be stopped until… |
| 1.3.6.1.4.1.3902.3.6000.134.2.1.14 | Columnzxr10twampSessionSendPktCount | read-create | current | The number of sending packet which applies to condition when the sending packet mode is packets.The test will be stopped until the number of sending packet rea… |
| 1.3.6.1.4.1.3902.3.6000.134.2.1.15 | Columnzxr10twampSessionSendTime | read-create | current | Sending time of packets which applies to condition when the sending packet mode is seconds. The test will be stopped until the time of sending packets reaches … |
| 1.3.6.1.4.1.3902.3.6000.134.2.1.16 | Columnzxr10twampSessionIntervalUnit | read-create | current | The unit of sending interval which including second, millisecond and microsecond.(default :second) |
| 1.3.6.1.4.1.3902.3.6000.134.2.1.17 | Columnzxr10twampSessionInterval | read-create | current | Packet sending interval: If the unit is assigned second,it ranges from 1 to 60. If the unit is assigned millisecond,it ranges from 1 to 1000. If the unit is as… |
| 1.3.6.1.4.1.3902.3.6000.134.2.1.18 | Columnzxr10twampSessionStatInterval | read-create | current | The statistics interval,ranges from 5s to 60s.(default :15s) |
| 1.3.6.1.4.1.3902.3.6000.134.2.1.19 | Columnzxr10twampSessionRowStatus | read-create | current | Row status |
| 1.3.6.1.4.1.3902.3.6000.134.3 | Tablezxr10twampProOperationTable | not-accessible | current | The configuration table of proactive TWAMP test. |
| 1.3.6.1.4.1.3902.3.6000.134.3.1 | Rowzxr10twampProOperationEntry | not-accessible | current | An entry containing configuration information applicable to a particular proactive test of TWAMP. |
| 1.3.6.1.4.1.3902.3.6000.134.3.1.1 | Columnzxr10twampProOperationId | not-accessible | current | The connection ID applies to the proactive test of TWAMP. |
| 1.3.6.1.4.1.3902.3.6000.134.3.1.2 | Columnzxr10twampProOperation | read-write | current | The proactive operation type which including start and stop. (default :stop) |
| 1.3.6.1.4.1.3902.3.6000.134.4 | Tablezxr10twampOdOperationTable | not-accessible | current | The configuration table of on-demand TWAMP test. |
| 1.3.6.1.4.1.3902.3.6000.134.4.1 | Rowzxr10twampOdOperationEntry | not-accessible | current | An entry containing configuration information applicable to a particular on-demand test of TWAMP. |
| 1.3.6.1.4.1.3902.3.6000.134.4.1.1 | Columnzxr10twampOdOperationId | not-accessible | current | The connection ID applies to the on-demand test of TWAMP. |
| 1.3.6.1.4.1.3902.3.6000.134.4.1.2 | Columnzxr10twampOdOperation | read-write | current | The on-demand operation type which including start and stop. (default :stop) |
| 1.3.6.1.4.1.3902.3.6000.134.5 | Nodezxr10twampServer | |||
| 1.3.6.1.4.1.3902.3.6000.134.5.1 | Scalarzxr10twampSvrStatus | read-write | current | The status of TWAMP server,including enable and disable. (default: disable) |
| 1.3.6.1.4.1.3902.3.6000.134.5.2 | Scalarzxr10twampSvrInactiveTimeOut | read-write | current | Inactivity timeout,ranges from 10s to 1800s.(default: 900) |
| 1.3.6.1.4.1.3902.3.6000.134.5.3 | Scalarzxr10twampSvrMaxConDuration | read-write | current | The maximum duration of connection,ranges from 0h to 24h. If this node is assigned 0,it means permanence connection unless stopped manually.If it is assigned 1… |
| 1.3.6.1.4.1.3902.3.6000.134.5.4 | Scalarzxr10twampSvrMaxConnection | read-write | current | The maximum number of connections which the minimum value is 1, and the maximum value of this parameter depends on the device. (default: 64) |
| 1.3.6.1.4.1.3902.3.6000.134.5.5 | Scalarzxr10twampSvrMaxSession | read-write | current | The maximum number of sessions which the minimum value is 1, and the maximum value of this parameter depends on the device. (default: 128) |
| 1.3.6.1.4.1.3902.3.6000.134.5.6 | Scalarzxr10twampSvrMaxSePerConn | read-write | current | The maximum session number of each connection which the minimum value is 1, and the maximum value of this parameter depends on the device.(default: 8) |
| 1.3.6.1.4.1.3902.3.6000.134.5.7 | Scalarzxr10twampSvrPort | read-write | current | The port number of server, ranges from 1025 to 65535, or 862. (default: 862) |
| 1.3.6.1.4.1.3902.3.6000.134.5.8 | Scalarzxr10twampSvrIgnoreVrf | read-write | current | The ignore-vrf status,including enable and disable. (default value depends on the device) |
| 1.3.6.1.4.1.3902.3.6000.134.5.9 | Scalarzxr10twampSvrClientListStatus | read-write | current | The status of client list, including enable and disable. (default: disable) |
| 1.3.6.1.4.1.3902.3.6000.134.6 | Tablezxr10twampClientListTable | not-accessible | current | The configuration table of TWAMP client list. |
| 1.3.6.1.4.1.3902.3.6000.134.6.1 | Rowzxr10twampClientListEntry | not-accessible | current | An entry containing configuration information applicable to a particular client list of TWAMP |
| 1.3.6.1.4.1.3902.3.6000.134.6.1.1 | Columnzxr10twampClientListMember | not-accessible | current | IP address of the white list. |
| 1.3.6.1.4.1.3902.3.6000.134.6.1.2 | Columnzxr10twampClientListRowStatus | read-create | current | Row status |
| 1.3.6.1.4.1.3902.3.6000.134.7 | Tablezxr10twampResultTable | not-accessible | current | The result table of TWAMP detecting. |
| 1.3.6.1.4.1.3902.3.6000.134.7.1 | Rowzxr10twampResultEntry | not-accessible | current | An entry containing result information applicable to TWAMP detecting. |
| 1.3.6.1.4.1.3902.3.6000.134.7.1.1 | Columnzxr10twampResultConnectionId | not-accessible | current | The connection ID,ranges from 1 to 65535. |
| 1.3.6.1.4.1.3902.3.6000.134.7.1.2 | Columnzxr10twampResultSessionId | not-accessible | current | The session ID,ranges from 1 to 65535. |
| 1.3.6.1.4.1.3902.3.6000.134.7.1.3 | Columnzxr10twampResultPktSendNum | read-only | current | The count of sending packets. |
| 1.3.6.1.4.1.3902.3.6000.134.7.1.4 | Columnzxr10twampResultPktRcvNum | read-only | current | The count of receiving packets. |
| 1.3.6.1.4.1.3902.3.6000.134.7.1.5 | Columnzxr10twampResultPktLossNum | read-only | current | The count of lossing packets. |
| 1.3.6.1.4.1.3902.3.6000.134.7.1.6 | Columnzxr10twampResultPktLossRatio | read-only | current | The packet loss ratio which the precision is 1/1000000. |
| 1.3.6.1.4.1.3902.3.6000.134.7.1.7 | Columnzxr10twampResultTwDelay | read-only | current | Two way delay.(unit: ns) |
| 1.3.6.1.4.1.3902.3.6000.134.7.1.8 | Columnzxr10twampResultTwDelayMin | read-only | current | The minimum of two way delay.(unit: ns) |
| 1.3.6.1.4.1.3902.3.6000.134.7.1.9 | Columnzxr10twampResultTwDelayMax | read-only | current | The maximum of two way delay.(unit: ns) |
| 1.3.6.1.4.1.3902.3.6000.134.7.1.10 | Columnzxr10twampResultTwDelayAvg | read-only | current | The average of two way delay.(unit: ns) |
| 1.3.6.1.4.1.3902.3.6000.134.7.1.11 | Columnzxr10twampResultTwJitter | read-only | current | Delay jitter of two way packet.(unit: ns) |
| 1.3.6.1.4.1.3902.3.6000.134.7.1.12 | Columnzxr10twampResultTwJitterMin | read-only | current | The minimum delay jitter of two way packet.(unit: ns) |
| 1.3.6.1.4.1.3902.3.6000.134.7.1.13 | Columnzxr10twampResultTwJitterMax | read-only | current | The maximum delay jitter of two way packet.(unit: ns) |
| 1.3.6.1.4.1.3902.3.6000.134.7.1.14 | Columnzxr10twampResultTwJitterAvg | read-only | current | The average delay jitter of two way packet.(unit: ns) |
| 1.3.6.1.4.1.3902.3.6000.134.7.1.15 | Columnzxr10twampResultFwdDelay | read-only | current | The forward packet delay.(unit: ns) |
| 1.3.6.1.4.1.3902.3.6000.134.7.1.16 | Columnzxr10twampResultFwdDelayMin | read-only | current | The minimum of forward packet delay.(unit: ns) |
| 1.3.6.1.4.1.3902.3.6000.134.7.1.17 | Columnzxr10twampResultFwdDelayMax | read-only | current | The maximum of forward packet delay.(unit: ns) |
| 1.3.6.1.4.1.3902.3.6000.134.7.1.18 | Columnzxr10twampResultFwdDelayAvg | read-only | current | The average of forward packet delay.(unit: ns) |
| 1.3.6.1.4.1.3902.3.6000.134.7.1.19 | Columnzxr10twampResultFwdJitter | read-only | current | Delay jitter of the forward packet.(unit: ns) |
| 1.3.6.1.4.1.3902.3.6000.134.7.1.20 | Columnzxr10twampResultFwdJitterMin | read-only | current | The minimum of delay jitter of the forward packet.(unit: ns) |
| 1.3.6.1.4.1.3902.3.6000.134.7.1.21 | Columnzxr10twampResultFwdJitterMax | read-only | current | The maximum of delay jitter of the forward packet.(unit: ns) |
| 1.3.6.1.4.1.3902.3.6000.134.7.1.22 | Columnzxr10twampResultFwdJitterAvg | read-only | current | The average of delay jitter of the forward packet.(unit: ns) |
| 1.3.6.1.4.1.3902.3.6000.134.7.1.23 | Columnzxr10twampResultRvsDelay | read-only | current | The reverse packet delay.(unit: ns) |
| 1.3.6.1.4.1.3902.3.6000.134.7.1.24 | Columnzxr10twampResultRvsDelayMin | read-only | current | The minimum of reverse packet delay.(unit: ns) |
| 1.3.6.1.4.1.3902.3.6000.134.7.1.25 | Columnzxr10twampResultRvsDelayMax | read-only | current | The maximum of reverse packet delay.(unit: ns) |
| 1.3.6.1.4.1.3902.3.6000.134.7.1.26 | Columnzxr10twampResultRvsDelayAvg | read-only | current | The average of reverse packet delay.(unit: ns) |
| 1.3.6.1.4.1.3902.3.6000.134.7.1.27 | Columnzxr10twampResultRvsJitter | read-only | current | The reverse packet delay jitter.(unit: ns) |
| 1.3.6.1.4.1.3902.3.6000.134.7.1.28 | Columnzxr10twampResultRvsJitterMin | read-only | current | The minimum of delay jitter of the reverse packet.(unit: ns) |
| 1.3.6.1.4.1.3902.3.6000.134.7.1.29 | Columnzxr10twampResultRvsJitterMax | read-only | current | The maximum of delay jitter of the reverse packet.(unit: ns) |
| 1.3.6.1.4.1.3902.3.6000.134.7.1.30 | Columnzxr10twampResultRvsJitterAvg | read-only | current | The average of delay jitter of the reverse packet.(unit: ns) |