ZXROSNG-TPOAM-MIB
189 objects
ZXROS SMI MIB
Imported Objects
| SNMPv2-SMI | Counter32 Counter64 enterprises IpAddress MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3902 | Identityzte | ZXROS SMI MIB | ||
| 1.3.6.1.4.1.3902.3 | Identityzxr10 | current | Zxr10 is the root OBJECT IDENTIFIER for ZTE routers and switches pruducts | |
| 1.3.6.1.4.1.3902.3.6000 | Identityzxr10RosngMIB | current | Subtree beneath which ROSNG MIBS were built. | |
| 1.3.6.1.4.1.3902.3.6000.202 | IdentityzxTPOAMModules | current | Subtree beneath which zxTPOAMModules MIBS were built. | |
| 1.3.6.1.4.1.3902.3.6000.202.1 | ScalarzxTPOAMChannelType | read-only | current | The identity of Y.1731 packet in G-ACH Label (default:32762). |
| 1.3.6.1.4.1.3902.3.6000.202.2 | ScalarzxTPOAMMel | read-only | current | The value of MEL field in OAM packets(default: 7). |
| 1.3.6.1.4.1.3902.3.6000.202.3 | ScalarzxTPOAMGlobalEnable | read-only | current | The global enable switch(default: enable). |
| 1.3.6.1.4.1.3902.3.6000.202.4 | ScalarzxTPOAMTc | read-only | current | The value of TC field in the label of GAL(default:7). |
| 1.3.6.1.4.1.3902.3.6000.202.5 | ScalarzxTPOAMRdiToSF | read-only | current | This switch is used to transform the RDI alarm to SF alarm (default:disable). |
| 1.3.6.1.4.1.3902.3.6000.202.6 | TablezxTPOAMSectionConfigTable | not-accessible | current | The configuration table in the instance of SECTION. |
| 1.3.6.1.4.1.3902.3.6000.202.6.1 | RowzxTPOAMSectionConfigEntry | not-accessible | current | An entry containing management information applicable to a particular instance of SECTION |
| 1.3.6.1.4.1.3902.3.6000.202.6.1.1 | ColumnzxTPOAMSectionConfigSectionID | not-accessible | current | SECTION ID used to identify the SECTION entity. |
| 1.3.6.1.4.1.3902.3.6000.202.6.1.2 | ColumnzxTPOAMSectionConfigLocalPort | read-only | current | Local port bind the SECTION,and the port support GEI/FEI/VLAN subinterface/the third layer's vlan port/sg aggregation port/sg subinterface. The limits of confi… |
| 1.3.6.1.4.1.3902.3.6000.202.6.1.3 | ColumnzxTPOAMSectionConfigPeerIp | read-only | current | Peer ip address bind the SECTION. |
| 1.3.6.1.4.1.3902.3.6000.202.6.1.4 | ColumnzxTPOAMSectionConfigSdEnable | read-only | current | SECTION layer sd enable flag:1 disable,2 enable,default value is disable. |
| 1.3.6.1.4.1.3902.3.6000.202.7 | TablezxTPOAMTunnelEntityStaConfigTable | not-accessible | current | The configuration table in the instance of TUNNEL. |
| 1.3.6.1.4.1.3902.3.6000.202.7.1 | RowzxTPOAMTunnelEntityStaConfigEntry | not-accessible | current | An entry containing management information applicable to a particular instance of TUNNEL. |
| 1.3.6.1.4.1.3902.3.6000.202.7.1.1 | ColumnzxTPOAMTunnelEntityStaCTunnelID | not-accessible | current | The TUNNEL ID only applies to the bidirectional static TUNNEL. The range of this parameter depend on the device. |
| 1.3.6.1.4.1.3902.3.6000.202.7.1.2 | ColumnzxTPOAMTunnelEntityStaCLspid | not-accessible | current | The identity of the static LSP |
| 1.3.6.1.4.1.3902.3.6000.202.7.1.3 | ColumnzxTPOAMTunnelEntityStaCMegIndex | read-only | current | MEG index corresponding to this entity.0 is invalid and it means that have not created MEG. |
| 1.3.6.1.4.1.3902.3.6000.202.7.1.4 | ColumnzxTPOAMTunnelEntityStaCPropagate | read-only | current | The propagating switch of the entity |
| 1.3.6.1.4.1.3902.3.6000.202.8 | TablezxTPOAMTunnelEntityDynConfigTable | not-accessible | current | The configuration table in the instance of dynamic TUNNEL. |
| 1.3.6.1.4.1.3902.3.6000.202.8.1 | RowzxTPOAMTunnelEntityDynConfigEntry | not-accessible | current | An entry containing management information applicable to a particular instance of dynamic TUNNEL. |
| 1.3.6.1.4.1.3902.3.6000.202.8.1.1 | ColumnzxTPOAMTunnelEntityDynCTunnelID | not-accessible | current | TUNNEL ID. The range of this parameter depend on the device. |
| 1.3.6.1.4.1.3902.3.6000.202.8.1.2 | ColumnzxTPOAMTunnelEntityDynCLspRole | not-accessible | current | The identity of dynamic LSP which including two roles: master and backup |
| 1.3.6.1.4.1.3902.3.6000.202.8.1.3 | ColumnzxTPOAMTunnelEntityDynCMegIndex | read-only | current | MEG index corresponding to this entity.0 is invalid and it means that have not created MEG. |
| 1.3.6.1.4.1.3902.3.6000.202.9 | TablezxTPOAMPWEntityConfigTable | not-accessible | current | The configuration table in the instance of PW. |
| 1.3.6.1.4.1.3902.3.6000.202.9.1 | RowzxTPOAMPWEntityConfigEntry | not-accessible | current | An entry containing management information applicable to a particular instance of PW. |
| 1.3.6.1.4.1.3902.3.6000.202.9.1.1 | ColumnzxTPOAMPWEntityPWName | not-accessible | current | The PW name |
| 1.3.6.1.4.1.3902.3.6000.202.9.1.2 | ColumnzxTPOAMPWEntityMegIndex | read-only | current | MEG index corresponding to this entity.0 is invalid and it means that have not created MEG. |
| 1.3.6.1.4.1.3902.3.6000.202.10 | TablezxTPOAMSectionEntityConfigTable | not-accessible | current | The configuration table in the instance of SECTION. |
| 1.3.6.1.4.1.3902.3.6000.202.10.1 | RowzxTPOAMSectionEntityConfigEntry | not-accessible | current | An entry containing management information applicable to a particular instance of SECTION. |
| 1.3.6.1.4.1.3902.3.6000.202.10.1.1 | ColumnzxTPOAMSectionEntitySectionID | not-accessible | current | SECTION ID |
| 1.3.6.1.4.1.3902.3.6000.202.10.1.2 | ColumnzxTPOAMSectionEntityMegIndex | read-only | current | MEG index corresponding to this entity.0 is invalid and it means that have not created MEG. |
| 1.3.6.1.4.1.3902.3.6000.202.10.1.3 | ColumnzxTPOAMSectionEntityPropagate | read-only | current | The propagating switch of the entity |
| 1.3.6.1.4.1.3902.3.6000.202.11 | TablezxTPOAMMegConfigTable | not-accessible | current | The configuration table of MEG. |
| 1.3.6.1.4.1.3902.3.6000.202.11.1 | RowzxTPOAMMegConfigEntry | not-accessible | current | An entry containing management information applicable to a particular MEG. |
| 1.3.6.1.4.1.3902.3.6000.202.11.1.1 | ColumnzxTPOAMMegConfigIndex | not-accessible | current | MEG index |
| 1.3.6.1.4.1.3902.3.6000.202.11.1.2 | ColumnzxTPOAMMegConfigMegID | read-only | current | MEG identity name |
| 1.3.6.1.4.1.3902.3.6000.202.11.1.3 | ColumnzxTPOAMMegConfigOAMEnable | read-only | current | The OAM enable switch under MEG model.(default :disable) |
| 1.3.6.1.4.1.3902.3.6000.202.11.1.4 | ColumnzxTPOAMMegConfigCCEnable | read-only | current | The CC enable switch (this switch only enable in the case of peer mep and local mep with full configuration) |
| 1.3.6.1.4.1.3902.3.6000.202.11.1.5 | ColumnzxTPOAMMegConfigCVEnable | read-only | current | The CV enable switch |
| 1.3.6.1.4.1.3902.3.6000.202.11.1.6 | ColumnzxTPOAMMegConfigCVPeriod | read-only | current | The sending period of CV packets |
| 1.3.6.1.4.1.3902.3.6000.202.11.1.7 | ColumnzxTPOAMMegConfigCVPhbName | read-only | current | The PHB value in CV sending packets.(default :cs7) |
| 1.3.6.1.4.1.3902.3.6000.202.11.1.8 | ColumnzxTPOAMMegConfigAISEnable | read-only | obsolete | The AIS enable switch(The function of AIS is enabled only in the instance of lsp or pw) |
| 1.3.6.1.4.1.3902.3.6000.202.11.1.9 | ColumnzxTPOAMMegConfigAISPhb | read-only | obsolete | The PHB value in AIS sending packets.(default :cs7) |
| 1.3.6.1.4.1.3902.3.6000.202.11.1.10 | ColumnzxTPOAMMegConfigCSFEnable | read-only | current | The switch of CSF.(The function of CSF is enabled only in the instance of pw) |
| 1.3.6.1.4.1.3902.3.6000.202.11.1.11 | ColumnzxTPOAMMegConfigCSFPhb | read-only | current | The PHB value in CSF sending packets.(default :cs7) |
| 1.3.6.1.4.1.3902.3.6000.202.11.1.12 | ColumnzxTPOAMMegConfigLocalMepType | read-only | current | Local MEP type :source MEP/destination MEP/bidirectional MEP.The configuration of MEP and MIP is mutual exclusive. |
| 1.3.6.1.4.1.3902.3.6000.202.11.1.13 | ColumnzxTPOAMMegConfigLocalMepID | read-only | current | Lhe identity of local MEP.0 is invalid and it means that have not configed MEP. |
| 1.3.6.1.4.1.3902.3.6000.202.11.1.14 | ColumnzxTPOAMMegConfigPeerMepType | read-only | current | The type of peer MEP including source MEP,destination MEP and bidirectional MEP. |
| 1.3.6.1.4.1.3902.3.6000.202.11.1.15 | ColumnzxTPOAMMegConfigPeerlMepID | read-only | current | The identity of peer MEP.0 is invalid and it means that have not configed peer MEP. |
| 1.3.6.1.4.1.3902.3.6000.202.11.1.16 | ColumnzxTPOAMMegConfigMipID | read-only | current | The identity of MIP.0 is invalid and it means that have not configed MIP. |
| 1.3.6.1.4.1.3902.3.6000.202.11.1.17 | ColumnzxTPOAMMegConfigMipUpDown | read-only | current | The MIP attribute including UP and DOWN is available only when the value of zxTPOAMMegConfigMipID is not 0 |
| 1.3.6.1.4.1.3902.3.6000.202.11.1.18 | ColumnzxTPOAMMegConfigProactiveLmEnable | read-only | current | The switch of proactive LM.(default: disable) |
| 1.3.6.1.4.1.3902.3.6000.202.11.1.19 | ColumnzxTPOAMMegConfigSdEnable | read-only | current | The switch of SD alarm function.(default :disable) (even if the loss ratio runs over the threshold, there is no SD alarm without this configuration) |
| 1.3.6.1.4.1.3902.3.6000.202.11.1.20 | ColumnzxTPOAMMegConfigLossPktThresholdMantissa | read-only | current | The configuration of loss ratio threshold(This field displays the manitissa in E-notation)(default: 5) |
| 1.3.6.1.4.1.3902.3.6000.202.11.1.21 | ColumnzxTPOAMMegConfigLossPktThresholdExponent | read-only | current | The configuration of loss ratio threshold(This field displays the exponent in E-notation)(default: 5) |
| 1.3.6.1.4.1.3902.3.6000.202.11.1.22 | ColumnzxTPOAMMegConfigLCKEnable | read-only | current | The switch of LCK.(default: disable) |
| 1.3.6.1.4.1.3902.3.6000.202.11.1.23 | ColumnzxTPOAMMegConfigTunnelID | read-only | current | The node identified the TUNNEL ID if MEG binding the static or dynamic tunnels.0 is invalid. The range of this parameter depending on the device. |
| 1.3.6.1.4.1.3902.3.6000.202.11.1.24 | ColumnzxTPOAMMegConfigLspid | read-only | current | the node identified the static tunnel if MEG binding the static tunnels.0 is invalid |
| 1.3.6.1.4.1.3902.3.6000.202.11.1.25 | ColumnzxTPOAMMegConfigLspRole | read-only | current | The node identified the dynamic tunnel if MEG binding the dynamic tunnels.The LSP acts as master or backup.0 is invalid |
| 1.3.6.1.4.1.3902.3.6000.202.11.1.26 | ColumnzxTPOAMMegConfigPWName | read-only | current | The node identified the PW name if MEG binding the instance of PW. Null is invalid |
| 1.3.6.1.4.1.3902.3.6000.202.11.1.27 | ColumnzxTPOAMMegConfigSectionID | read-only | current | The node identified the SECTION ID if MEG binding the instace of SECTION.0 is invalid |
| 1.3.6.1.4.1.3902.3.6000.202.11.1.28 | ColumnzxTPOAMMegConfigProactiveLmType | read-only | current | Proactive LM adopts protocol type: G.8114,counting the data packets; Y.1731,counting the data packets and OAM packets. |
| 1.3.6.1.4.1.3902.3.6000.202.11.1.29 | ColumnzxTPOAMMegConfigPaDMEnable | read-only | current | The switch of proactive DM.(default: disable) |
| 1.3.6.1.4.1.3902.3.6000.202.11.1.30 | ColumnzxTPOAMMegConfigPaDMType | read-only | current | The type of proactive DM.(default: oneway) |
| 1.3.6.1.4.1.3902.3.6000.202.11.1.31 | ColumnzxTPOAMMegConfigPaDMPhb | read-only | current | the PHB value in DM sending packets.(default: cs7) |
| 1.3.6.1.4.1.3902.3.6000.202.11.1.32 | ColumnzxTPOAMMegConfigPaDMSendInterval | read-only | current | Sending intervals in the function of proactive DM. (sending interval :100ms-10s,default value:1s) |
| 1.3.6.1.4.1.3902.3.6000.202.11.1.33 | ColumnzxTPOAMMegConfigPaDMTlvSize | read-only | current | The length of the TLV information in the function of proactive DM |
| 1.3.6.1.4.1.3902.3.6000.202.12 | TablezxTPOAMLbTable | not-accessible | current | The configuration table of LB detecting. |
| 1.3.6.1.4.1.3902.3.6000.202.12.1 | RowzxTPOAMLbEntry | not-accessible | current | An entry containing management information applicable to a particular LB detecting. |
| 1.3.6.1.4.1.3902.3.6000.202.12.1.1 | ColumnzxTPOAMLbMegIndex | not-accessible | current | MEG index |
| 1.3.6.1.4.1.3902.3.6000.202.12.1.2 | ColumnzxTPOAMLbSnmpIndex | not-accessible | current | Detecting instance index sending by network management by snmp. |
| 1.3.6.1.4.1.3902.3.6000.202.12.1.3 | ColumnzxTPOAMLbEnable | read-create | current | The switch of LB. |
| 1.3.6.1.4.1.3902.3.6000.202.12.1.4 | ColumnzxTPOAMLbMepID | read-create | current | Destination MEP ID in the function of LB.0 stands for the type of MIP. MEP ID and MIP ID can't be effective or invalid at the same time. |
| 1.3.6.1.4.1.3902.3.6000.202.12.1.5 | ColumnzxTPOAMLbMipID | read-create | current | Destination MIP ID in the function of LB. |
| 1.3.6.1.4.1.3902.3.6000.202.12.1.6 | ColumnzxTPOAMLbMepMode | read-create | current | The LB working model:standard model and private model of ZTE (default: private model) |
| 1.3.6.1.4.1.3902.3.6000.202.12.1.7 | ColumnzxTPOAMLbTimeOut | read-create | current | Timeout value of waiting responding packets(default: 5s) |
| 1.3.6.1.4.1.3902.3.6000.202.12.1.8 | ColumnzxTPOAMLbMipTTL | read-create | current | TTL value of the destination MIP ID in the function of LB. The node is invalid when the zxTPOAMLbLBType is MEP type. |
| 1.3.6.1.4.1.3902.3.6000.202.12.1.9 | ColumnzxTPOAMLbSendPeriod | read-create | current | Duration time in the function of LB.It ranges from 10s to 24h without the configuration of permanence detecting.If this node assigned 0,it means permanence det… |
| 1.3.6.1.4.1.3902.3.6000.202.12.1.10 | ColumnzxTPOAMLbTlvSize | read-create | current | The length of the TLV information in the function of LB(1-400). |
| 1.3.6.1.4.1.3902.3.6000.202.12.1.11 | ColumnzxTPOAMLbPhb | read-create | current | the PHB value in LB sending packets.(default: cs7) |
| 1.3.6.1.4.1.3902.3.6000.202.12.1.12 | ColumnzxTPOAMLbSendLimitFlag | read-create | current | The limit of sending speed in the function of LB. default value is 10 packets per second.It means sending at full speed when the value is 0. |
| 1.3.6.1.4.1.3902.3.6000.202.12.1.13 | ColumnzxTPOAMLbSendResultFlag | read-create | current | The flag is used to judge perserving results or not.default value is nopreserve. |
| 1.3.6.1.4.1.3902.3.6000.202.12.1.14 | ColumnzxTPOAMLbRowStatus | read-create | current | Row status |
| 1.3.6.1.4.1.3902.3.6000.202.13 | TablezxTPOAMLbResultTable | not-accessible | current | The result table of LB detecting. |
| 1.3.6.1.4.1.3902.3.6000.202.13.1 | RowzxTPOAMLbResultEntry | not-accessible | current | An entry containing result information applicable to LB detecting |
| 1.3.6.1.4.1.3902.3.6000.202.13.1.1 | ColumnzxTPOAMLbResultMegIndex | not-accessible | current | MEG index |
| 1.3.6.1.4.1.3902.3.6000.202.13.1.2 | ColumnzxTPOAMLbResultSnmpIndex | not-accessible | current | Detecting instance index sending by network management by snmp |
| 1.3.6.1.4.1.3902.3.6000.202.13.1.3 | ColumnzxTPOAMLbResultLocalMep | read-only | current | Local MEP ID |
| 1.3.6.1.4.1.3902.3.6000.202.13.1.4 | ColumnzxTPOAMLbResultDestMep | read-only | current | Destination MEP ID in the function of LB.0 stands for the type of MEP.MEP ID and MIP ID can't be effective or invalid at the same time. |
| 1.3.6.1.4.1.3902.3.6000.202.13.1.5 | ColumnzxTPOAMLbResultDestMip | read-only | current | Destination MIP ID in the function of LB.0 stands for the type of MIP. MEP ID and MIP ID can't be effective or invalid at the same time |
| 1.3.6.1.4.1.3902.3.6000.202.13.1.6 | ColumnzxTPOAMLbResultSendCount | read-only | current | The count of sending LB packets |
| 1.3.6.1.4.1.3902.3.6000.202.13.1.7 | ColumnzxTPOAMLbResultRecvCount | read-only | current | The count of receiving LB packets |
| 1.3.6.1.4.1.3902.3.6000.202.13.1.8 | ColumnzxTPOAMLbResultDiscardCount | read-only | current | The count of discarding LB packets |
| 1.3.6.1.4.1.3902.3.6000.202.13.1.9 | ColumnzxTPOAMLbResultStatus | read-only | current | The status of testing instance:not started,testing,finished |
| 1.3.6.1.4.1.3902.3.6000.202.14 | TablezxTPOAMLtTable | not-accessible | current | The configuration table of LT detecting. |
| 1.3.6.1.4.1.3902.3.6000.202.14.1 | RowzxTPOAMLtEntry | not-accessible | current | An entry containing management information applicable to a particular LT detecting. |
| 1.3.6.1.4.1.3902.3.6000.202.14.1.1 | ColumnzxTPOAMLtMegIndex | not-accessible | current | MEG index |
| 1.3.6.1.4.1.3902.3.6000.202.14.1.2 | ColumnzxTPOAMLtSnmpIndex | not-accessible | current | Detecting instance index sending by network management by snmp |
| 1.3.6.1.4.1.3902.3.6000.202.14.1.3 | ColumnzxTPOAMLtMepID | read-create | current | Destination MEP ID in the function of LT. |
| 1.3.6.1.4.1.3902.3.6000.202.14.1.4 | ColumnzxTPOAMLtEnable | read-create | current | The switch of LT. |
| 1.3.6.1.4.1.3902.3.6000.202.14.1.5 | ColumnzxTPOAMLtTimeOut | read-create | current | Timeout value of waiting responding packets.(default: 5s) |
| 1.3.6.1.4.1.3902.3.6000.202.14.1.6 | ColumnzxTPOAMLtTTL | read-create | current | Maximum of the TTL in the function of LT. |
| 1.3.6.1.4.1.3902.3.6000.202.14.1.7 | ColumnzxTPOAMLtPhb | read-create | current | The PHB value in LT sending packets.(default: cs7) |
| 1.3.6.1.4.1.3902.3.6000.202.14.1.8 | ColumnzxTPOAMLtTlvSize | read-create | current | The length of the TLV information in the function of LT. |
| 1.3.6.1.4.1.3902.3.6000.202.14.1.9 | ColumnzxTPOAMLtMode | read-create | current | The LT working model:standard model and private model of ZTE. (default: private model) |
| 1.3.6.1.4.1.3902.3.6000.202.14.1.10 | ColumnzxTPOAMLtSendResultFlag | read-create | current | The flag used to judge perserving results or not. default value is nopreserve. |
| 1.3.6.1.4.1.3902.3.6000.202.14.1.11 | ColumnzxTPOAMLtRowStatus | read-create | current | Row status |
| 1.3.6.1.4.1.3902.3.6000.202.15 | TablezxTPOAMLtResultTable | not-accessible | current | The result table of LT detecting. |
| 1.3.6.1.4.1.3902.3.6000.202.15.1 | RowzxTPOAMLtResultEntry | not-accessible | current | An entry containing result information applicable to a particular LT detecting. |
| 1.3.6.1.4.1.3902.3.6000.202.15.1.1 | ColumnzxTPOAMLtResultMegIndex | not-accessible | current | MEG index |
| 1.3.6.1.4.1.3902.3.6000.202.15.1.2 | ColumnzxTPOAMLtResultSnmpIndex | not-accessible | current | Detecting instance index sending by network management by snmp |
| 1.3.6.1.4.1.3902.3.6000.202.15.1.3 | ColumnzxTPOAMLtResultLocalMep | read-only | current | Local MEP ID |
| 1.3.6.1.4.1.3902.3.6000.202.15.1.4 | ColumnzxTPOAMLtResultProcessStatus | read-only | current | The process of LT testing:fail or success. |
| 1.3.6.1.4.1.3902.3.6000.202.15.1.5 | ColumnzxTPOAMLtResultHopCount | read-only | current | Success hops of LT testing |
| 1.3.6.1.4.1.3902.3.6000.202.15.1.6 | ColumnzxTPOAMLtResultStatus | read-only | current | The status of testing instance :not started,testing,finished |
| 1.3.6.1.4.1.3902.3.6000.202.16 | TablezxTPOAMLtResultHopTable | not-accessible | current | The hop table of LT detecting. |
| 1.3.6.1.4.1.3902.3.6000.202.16.1 | RowzxTPOAMLtResultHopEntry | not-accessible | current | An entry containing hop result information applicable to a particular LT detecting. |
| 1.3.6.1.4.1.3902.3.6000.202.16.1.1 | ColumnzxTPOAMLtResultHopMegIndex | not-accessible | current | MEG index |
| 1.3.6.1.4.1.3902.3.6000.202.16.1.2 | ColumnzxTPOAMLtResultHopSnmpIndex | not-accessible | current | Detecting instance index sending by network management by snmp |
| 1.3.6.1.4.1.3902.3.6000.202.16.1.3 | ColumnzxTPOAMLtResultHopIndex | not-accessible | current | Hop index |
| 1.3.6.1.4.1.3902.3.6000.202.16.1.4 | ColumnzxTPOAMLtResultHopType | read-only | current | Hop type:MEP or MIP |
| 1.3.6.1.4.1.3902.3.6000.202.16.1.5 | ColumnzxTPOAMLtResultHopID | read-only | current | The ID of MEP or MIP(it's invalid if the function adopt the private model of ZTE) |
| 1.3.6.1.4.1.3902.3.6000.202.17 | TablezxTPOAMTestTable | not-accessible | current | The configuration table of TEST detecting. |
| 1.3.6.1.4.1.3902.3.6000.202.17.1 | RowzxTPOAMTestEntry | not-accessible | current | An entry containing management information applicable to a particular TEST detecting. |
| 1.3.6.1.4.1.3902.3.6000.202.17.1.1 | ColumnzxTPOAMTestMegIndex | not-accessible | current | MEG index |
| 1.3.6.1.4.1.3902.3.6000.202.17.1.2 | ColumnzxTPOAMTestEnable | read-create | current | The switch of TEST. |
| 1.3.6.1.4.1.3902.3.6000.202.17.1.3 | ColumnzxTPOAMTestType | read-create | current | The type of the TEST function :source /destination /bidirectional. Now only supporting the one-way model. |
| 1.3.6.1.4.1.3902.3.6000.202.17.1.4 | ColumnzxTPOAMTestOneWayMepID | read-create | current | The MEP ID of destination MEP in the function of Unidirectional TEST. |
| 1.3.6.1.4.1.3902.3.6000.202.17.1.5 | ColumnzxTPOAMTestSendPeriod | read-create | current | Duration time in the function of TEST.It ranges from 10s to 24h without the configuration of permanence detecting.If this node assigned 0,it means permanence d… |
| 1.3.6.1.4.1.3902.3.6000.202.17.1.6 | ColumnzxTPOAMTestTlvSize | read-create | current | The length of the TLV information in the function of TEST. |
| 1.3.6.1.4.1.3902.3.6000.202.17.1.7 | ColumnzxTPOAMTestPhb | read-create | current | The PHB value in TEST sending packets.(default: cs7) |
| 1.3.6.1.4.1.3902.3.6000.202.17.1.8 | ColumnzxTPOAMTestSpeed | read-create | current | Sending ratio: default value 10000kbps |
| 1.3.6.1.4.1.3902.3.6000.202.17.1.9 | ColumnzxTPOAMTestCodeType | read-create | current | The TLV value: all 0, all 1 (default:all 0) |
| 1.3.6.1.4.1.3902.3.6000.202.17.1.10 | ColumnzxTPOAMTestRowStatus | read-create | current | Row status |
| 1.3.6.1.4.1.3902.3.6000.202.18 | TablezxTPOAMTestResultTable | not-accessible | current | The result table of TEST detecting. |
| 1.3.6.1.4.1.3902.3.6000.202.18.1 | RowzxTPOAMTestResultEntry | not-accessible | current | An entry containing result information applicable to a particular TEST detecting. |
| 1.3.6.1.4.1.3902.3.6000.202.18.1.1 | ColumnzxTPOAMTestResultMegIndex | not-accessible | current | MEG index |
| 1.3.6.1.4.1.3902.3.6000.202.18.1.2 | ColumnzxTPOAMTestResultLocalMep | read-only | current | Local MEP ID |
| 1.3.6.1.4.1.3902.3.6000.202.18.1.3 | ColumnzxTPOAMTestResultRecvCount | read-only | current | The count of sending TEST packets. |
| 1.3.6.1.4.1.3902.3.6000.202.18.1.4 | ColumnzxTPOAMTestResultBandWidth | read-only | current | The bandwidth in the function of TEST. |
| 1.3.6.1.4.1.3902.3.6000.202.18.1.5 | ColumnzxTPOAMTestResultDiscardCount | read-only | current | Discarding count in the function of TEST. |
| 1.3.6.1.4.1.3902.3.6000.202.18.1.6 | ColumnzxTPOAMTestResultStatus | read-only | current | The status of testing instance :not started,testing,finished |
| 1.3.6.1.4.1.3902.3.6000.202.19 | TablezxTPOAMLmOnDemandTable | not-accessible | current | The testing table of on-demand LM detecting. |
| 1.3.6.1.4.1.3902.3.6000.202.19.1 | RowzxTPOAMLmOnDemandEntry | not-accessible | current | An entry containing management information applicable to a particular on-demand LM detecting. |
| 1.3.6.1.4.1.3902.3.6000.202.19.1.1 | ColumnzxTPOAMLMOnDemandMegIndex | not-accessible | current | MEG index |
| 1.3.6.1.4.1.3902.3.6000.202.19.1.2 | ColumnzxTPOAMLMOnDemandEnable | read-create | current | The switch of on-demand LM. |
| 1.3.6.1.4.1.3902.3.6000.202.19.1.3 | ColumnzxTPOAMLMOnDemandSendPeriod | read-create | current | Duration time in the function of LM.It ranges from 10s to 24h without the configuration of permanence detecting.If this node assigned 0,it means permanence det… |
| 1.3.6.1.4.1.3902.3.6000.202.19.1.4 | ColumnzxTPOAMLMOnDemandLmPhb | read-create | current | The PHB value in LM sending packets. |
| 1.3.6.1.4.1.3902.3.6000.202.19.1.5 | ColumnzxTPOAMLMOnDemandSendInterval | read-create | current | Sending intervals in the function of on-demand LM. (sending interval :100ms-10s,default value:1s) |
| 1.3.6.1.4.1.3902.3.6000.202.19.1.6 | ColumnzxTPOAMLMOnDemandRowStatus | read-create | current | Row status |
| 1.3.6.1.4.1.3902.3.6000.202.19.1.7 | ColumnzxTPOAMLMOnDemandType | read-create | current | On-demand LM adopts protocol type: G.8114,counting the data packets; Y.1731,counting the data packets and OAM packets. |
| 1.3.6.1.4.1.3902.3.6000.202.20 | TablezxTPOAMLmOnDemandResultTable | not-accessible | current | The result table of on-demand LM detecting. |
| 1.3.6.1.4.1.3902.3.6000.202.20.1 | RowzxTPOAMLmOnDemandResultEntry | not-accessible | current | An entry containing result information applicable to a particular on-demand LM detecting. |
| 1.3.6.1.4.1.3902.3.6000.202.20.1.1 | ColumnzxTPOAMLmODResultLocalMegIndex | not-accessible | current | MEG index |
| 1.3.6.1.4.1.3902.3.6000.202.20.1.2 | ColumnzxTPOAMLmODResultLocalMepID | read-only | current | Local MEP ID |
| 1.3.6.1.4.1.3902.3.6000.202.20.1.3 | ColumnzxTPOAMLmODResultLocalSPktCount | read-only | current | The number of local sending packets. |
| 1.3.6.1.4.1.3902.3.6000.202.20.1.4 | ColumnzxTPOAMLmODResultLocalRPktCount | read-only | current | The number of local receiving packets. |
| 1.3.6.1.4.1.3902.3.6000.202.20.1.5 | ColumnzxTPOAMLmODResultLocalDRPktCount | read-only | current | The number of local lossing packets. |
| 1.3.6.1.4.1.3902.3.6000.202.20.1.6 | ColumnzxTPOAMLmODResultLocalDiscardRatio | read-only | current | The ratio of local lossing packets in the function of on-demand LM. |
| 1.3.6.1.4.1.3902.3.6000.202.20.1.7 | ColumnzxTPOAMLmODResultRemoteSPktCount | read-only | current | The number of remote sending packets. |
| 1.3.6.1.4.1.3902.3.6000.202.20.1.8 | ColumnzxTPOAMLmODResultRemoteRPktCount | read-only | current | The number of remote receiving packets. |
| 1.3.6.1.4.1.3902.3.6000.202.20.1.9 | ColumnzxTPOAMLmODResultRemoteDRPktCount | read-only | current | The number of remote lossing packets. |
| 1.3.6.1.4.1.3902.3.6000.202.20.1.10 | ColumnzxTPOAMLmODResultRemoteDiscardRatio | read-only | current | The ratio of remote lossing packets in the function of on-demand LM. |
| 1.3.6.1.4.1.3902.3.6000.202.20.1.11 | ColumnzxTPOAMLmODResultStatus | read-only | current | The status of testing instance :not started,testing,finished |
| 1.3.6.1.4.1.3902.3.6000.202.21 | TablezxTPOAMDMTable | not-accessible | current | The testing table of DM detecting. |
| 1.3.6.1.4.1.3902.3.6000.202.21.1 | RowzxTPOAMDMEntry | not-accessible | current | An entry containing management information applicable to a particular DM detecting. |
| 1.3.6.1.4.1.3902.3.6000.202.21.1.1 | ColumnzxTPOAMDMMegIndex | not-accessible | current | MEG index |
| 1.3.6.1.4.1.3902.3.6000.202.21.1.2 | ColumnzxTPOAMDMEnable | read-create | current | The switch of DM. |
| 1.3.6.1.4.1.3902.3.6000.202.21.1.3 | ColumnzxTPOAMDMType | read-create | current | The type of the DM function. |
| 1.3.6.1.4.1.3902.3.6000.202.21.1.4 | ColumnzxTPOAMDMSendPhb | read-create | current | the PHB value in DM sending packets. |
| 1.3.6.1.4.1.3902.3.6000.202.21.1.5 | ColumnzxTPOAMDMSendPeriod | read-create | current | Duration time in the function of DM.It ranges from 10s to 24h without the configuration of permanence detecting.If this node assigned 0,it means permanence det… |
| 1.3.6.1.4.1.3902.3.6000.202.21.1.6 | ColumnzxTPOAMDMSendInterval | read-create | current | Sending intervals in the function of DM. (sending interval :100ms-10s,default value:1s) |
| 1.3.6.1.4.1.3902.3.6000.202.21.1.7 | ColumnzxTPOAMDMRowStatus | read-create | current | row status |
| 1.3.6.1.4.1.3902.3.6000.202.21.1.8 | ColumnzxTPOAMDMTlvSize | read-create | current | The length of the TLV information in the function of DM. |
| 1.3.6.1.4.1.3902.3.6000.202.22 | TablezxTPOAMDMResultTable | not-accessible | current | The result table of DM detecting. |
| 1.3.6.1.4.1.3902.3.6000.202.22.1 | RowzxTPOAMDMResultEntry | not-accessible | current | An entry containing result information applicable to a particular DM detecting |
| 1.3.6.1.4.1.3902.3.6000.202.22.1.1 | ColumnzxTPOAMDMResultMegIndex | not-accessible | current | MEG index |
| 1.3.6.1.4.1.3902.3.6000.202.22.1.2 | ColumnzxTPOAMDMResultLocalMepID | read-only | current | Local MEP ID |
| 1.3.6.1.4.1.3902.3.6000.202.22.1.3 | ColumnzxTPOAMDMResultDelay | read-only | current | The delay value in the function of DM (ns) |
| 1.3.6.1.4.1.3902.3.6000.202.22.1.4 | ColumnzxTPOAMDMResultDelayVariationRatio | read-only | current | The delay variation ratio in the function of DM(one in a million) |
| 1.3.6.1.4.1.3902.3.6000.202.22.1.5 | ColumnzxTPOAMDMResultAvgDelay | read-only | current | The average delay value in the function of DM(ns) |
| 1.3.6.1.4.1.3902.3.6000.202.22.1.6 | ColumnzxTPOAMDMResultAvgDelayVariationRatio | read-only | current | The average delay variation ratio in the function of DM (one in a million) |
| 1.3.6.1.4.1.3902.3.6000.202.22.1.7 | ColumnzxTPOAMDMResultDelayVariation | read-only | current | The difference of delay value before and after in the function of DM(ns) |
| 1.3.6.1.4.1.3902.3.6000.202.22.1.8 | ColumnzxTPOAMDMResultAvgDelayVariation | read-only | current | The average difference of delay value before and after in the function of DM(ns) |
| 1.3.6.1.4.1.3902.3.6000.202.22.1.9 | ColumnzxTPOAMDMResultStatus | read-only | current | The status of testing instance :not started,testing,finished |
| 1.3.6.1.4.1.3902.3.6000.202.22.1.10 | ColumnzxTPOAMDMResultType | read-only | current | The type of the DM function |