Lists the path of a subrate channel within the node. The format for each segment is as follows: bytes 1-2: Node number if this is a remote address. If local address, this shall return zero. byte 3: Nest number of the segment. byte 4: Slot number of the segment. bytes 5-6: Port number of the segment. For SCFs, the most significant three bits will be set to 001. For SAFs, the most significant three bits will be set to 010. For CCFs, the most significant three bits will be set to 011. bytes 7-8: Element number of the segment. bytes 9-10: Module type of the segment. The values correspond the values of restSlotSWModuleType attribute. bytes 11-12: Channel phasor status. All bits zero indicates normal. Bit 1 indicates the least significant bit in the second octet. bit 1 - receive phasor underflow bit 2 - receive phasor overflow bit 3 - receive phasor empty bit 4 - receive phasor full bit 5 - receive phasor fifo error bit 6-7 are reserved bit 8 - receive phasor not applicable bit 9 - transmit phasor underflow bit 10 - transmit phasor overflow bit 11 - transmit phasor empty bit 12 - transmit phasor full bit 13 - transmit phasor fifo error bits 14-15 are reserved bit 16 - transmit phasor not applicable If the subrate segment does not have a channel phasor, then the value of this attribute will be x8080.