ACC-AT
170 objects
No module-level DESCRIPTION found.
Imported Objects
| ACC-MIB | accBRG DisplayString IfIndex RowStatus SmdsAddress |
| ACC-SYSTEM | accTrapLogSeqNum |
| RFC1155-SMI | Counter OBJECT-TYPE TimeTicks |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5.1.1.28 | NodeaccAt | |||
| 1.3.6.1.4.1.5.1.1.28.1 | NodeaccAtNode | |||
| 1.3.6.1.4.1.5.1.1.28.1.1 | ScalaraccAtNodeAdState | read-write | mandatory | The administrative state of the AppleTalk router. If set to on(1), AppleTalk packets will be routed on ports which have been administratively enabled. If set t… |
| 1.3.6.1.4.1.5.1.1.28.1.2 | ScalaraccAtNodeChecksum | read-write | mandatory | The AppleTalk checksum mode. If set to on(1), output packets will be generated with the standard AppleTalk checksum. If set to off(2), output packets will be g… |
| 1.3.6.1.4.1.5.1.1.28.1.3 | ScalaraccAtNodeAarpExpire | read-write | mandatory | The AARP database expiration interval. AARP database entries which are not updated within this interval of time are deleted from the database. The default valu… |
| 1.3.6.1.4.1.5.1.1.28.1.4 | ScalaraccAtNodeFfrRouting | read-write | mandatory | This object indicates whether appletalk uses a half (ACC) or full (Cisco) router model for frame relay. |
| 1.3.6.1.4.1.5.1.1.28.2 | TableaccAtAarpTable | not-accessible | mandatory | The AARP database containing AppleTalk protocol to hardware address mappings. This view of the AARP database differs from the standard view as seen from the ex… |
| 1.3.6.1.4.1.5.1.1.28.2.1 | RowaccAtAarpEntry | not-accessible | mandatory | An AARP database entry which maps a particular AppleTalk protocol address into a MAC-layer hardware address. |
| 1.3.6.1.4.1.5.1.1.28.2.1.1 | ColumnaccAtAarpTabPort | read-only | mandatory | The logical port number of a directly-connected AppleTalk network. |
| 1.3.6.1.4.1.5.1.1.28.2.1.2 | ColumnaccAtAarpTabMacAddr | read-only | mandatory | The 48-bit Ethernet or Token Ring MAC-layer address which corresponds to the AppleTalk network address. |
| 1.3.6.1.4.1.5.1.1.28.2.1.3 | ColumnaccAtAarpTabNetAddr | read-only | mandatory | The 24-bit AppleTalk network address consisting of a 16-bit network number and 8-bit node id. |
| 1.3.6.1.4.1.5.1.1.28.2.1.4 | ColumnaccAtAarpTabStatus | read-only | mandatory | The status of the entry. A status of dynamic(1) indicates the entry can be deleted when the expiration interval expires, a status of static(1) indicates the en… |
| 1.3.6.1.4.1.5.1.1.28.3 | TableaccAtAarpStatsTable | not-accessible | mandatory | AppleTalk Address Resolution Protocol (AARP) statistics maintained and reported on a per-port basis. |
| 1.3.6.1.4.1.5.1.1.28.3.1 | RowaccAtAarpStatsEntry | not-accessible | mandatory | The AARP statistics for a particular logical port. If the port is not connected to an AppleTalk network which uses AARP, all statistics will be reported with a… |
| 1.3.6.1.4.1.5.1.1.28.3.1.1 | ColumnaccAtAarpStatsInRequests | read-only | mandatory | The number of AARP request packets received. |
| 1.3.6.1.4.1.5.1.1.28.3.1.2 | ColumnaccAtAarpStatsInResponses | read-only | mandatory | The number of AARP response packets received. |
| 1.3.6.1.4.1.5.1.1.28.3.1.3 | ColumnaccAtAarpStatsInProbes | read-only | mandatory | The number of AARP probe packets received. |
| 1.3.6.1.4.1.5.1.1.28.3.1.4 | ColumnaccAtAarpStatsOutRequests | read-only | mandatory | The number of AARP request packets sent. |
| 1.3.6.1.4.1.5.1.1.28.3.1.5 | ColumnaccAtAarpStatsOutResponses | read-only | mandatory | The number of AARP response packets sent. |
| 1.3.6.1.4.1.5.1.1.28.3.1.6 | ColumnaccAtAarpStatsOutProbes | read-only | mandatory | The number of AARP probe packets sent. |
| 1.3.6.1.4.1.5.1.1.28.3.1.7 | ColumnaccAtAarpStatsNoReplys | read-only | mandatory | The number of times an AARP request packet and its subsequent retransmissions received no response. |
| 1.3.6.1.4.1.5.1.1.28.3.1.8 | ColumnaccAtAarpStatsExpires | read-only | mandatory | The number of times an entry was deleted from the AARP database because the expiration interval had expired. |
| 1.3.6.1.4.1.5.1.1.28.3.1.9 | ColumnaccAtAarpStatsDiscards | read-only | mandatory | The number of queued output packets discarded because of an unanswered AARP request. |
| 1.3.6.1.4.1.5.1.1.28.3.1.10 | ColumnaccAtAarpStatsInErrors | read-only | mandatory | The number of AARP packets received which were invalid or which could not be processed because of some internal error. |
| 1.3.6.1.4.1.5.1.1.28.3.1.11 | ColumnaccAtAarpStatsOutErrors | read-only | mandatory | The number of AARP packets which could not be sent because of some internal error. |
| 1.3.6.1.4.1.5.1.1.28.4 | NodeaccAtAdbStats | |||
| 1.3.6.1.4.1.5.1.1.28.4.1 | ScalaraccAtAdbStatsCacheds | read-only | mandatory | The number of times the desired database entry was the first entry in the hash bucket (i.e., it had already been rotated to the beginning of the list of entrie… |
| 1.3.6.1.4.1.5.1.1.28.4.2 | ScalaraccAtAdbStatsRotates | read-only | mandatory | The number of times the desired database entry was not the first entry in the hash bucket and had to be rotated to the beginning of the list. |
| 1.3.6.1.4.1.5.1.1.28.4.3 | ScalaraccAtAdbStatsNoEntries | read-only | mandatory | The number of times the desired entry was not in the AARP database. |
| 1.3.6.1.4.1.5.1.1.28.4.4 | ScalaraccAtAdbStatsAdds | read-only | mandatory | The number of times a new entry was added to the AARP database. |
| 1.3.6.1.4.1.5.1.1.28.4.5 | ScalaraccAtAdbStatsUpdates | read-only | mandatory | The number of times an existing entry was updated. |
| 1.3.6.1.4.1.5.1.1.28.4.6 | ScalaraccAtAdbStatsDeletes | read-only | mandatory | The number of times an entry was deleted from the AARP database. |
| 1.3.6.1.4.1.5.1.1.28.4.7 | ScalaraccAtAdbStatsTrims | read-only | mandatory | The number of times the AARP database was trimmed to make room for a new entry. |
| 1.3.6.1.4.1.5.1.1.28.4.8 | ScalaraccAtAdbStatsDiscards | read-only | mandatory | The number of queued output packets discarded because the anchoring database entry was deleted. |
| 1.3.6.1.4.1.5.1.1.28.5 | NodeaccAtDdpStats | |||
| 1.3.6.1.4.1.5.1.1.28.5.1 | ScalaraccAtDdpStatsNoOutRoutes | read-only | mandatory | The number of output packets generated by local protocol handlers for which there was not route to the destination network. |
| 1.3.6.1.4.1.5.1.1.28.5.2 | ScalaraccAtDdpStatsInErrors | read-only | mandatory | The number of packets received which could not be delivered because of some internal error. |
| 1.3.6.1.4.1.5.1.1.28.5.3 | ScalaraccAtDdpStatsOutErrors | read-only | mandatory | The number of packets locally generated which could not be sent because of some internal error. |
| 1.3.6.1.4.1.5.1.1.28.6 | TableaccAtNetTable | not-accessible | mandatory | AppleTalk network configuration table stored in NVM. |
| 1.3.6.1.4.1.5.1.1.28.6.1 | RowaccAtNetEntry | not-accessible | mandatory | The information stored in NVM which defines an AppleTalk network or half-router serial port. This information supplements standard configuration parameters def… |
| 1.3.6.1.4.1.5.1.1.28.6.1.1 | ColumnaccAtNetTabProtocol | read-write | mandatory | The type of data-link protocol used. These types augment the standard definitions in the experimental branch of the MIB and are used to maintain conformity wit… |
| 1.3.6.1.4.1.5.1.1.28.6.1.2 | ColumnaccAtNetTabRtmpIncr | read-write | mandatory | The RTMP hop-count increment to be applied to packets forwarded via this port or routing tuples received received on this port. |
| 1.3.6.1.4.1.5.1.1.28.6.1.3 | ColumnaccAtNetTabRtmpSend | read-write | mandatory | The RTMP send interval for routing updates sent via this port. The RTMP send interval may be set to a higher value on serial ports to limit the amount of bandw… |
| 1.3.6.1.4.1.5.1.1.28.6.1.4 | ColumnaccAtNetTabX25Addr1 | read-write | mandatory | The normal DTE address to use for sending or receiving packets via an X.25 virtual circuit. |
| 1.3.6.1.4.1.5.1.1.28.6.1.5 | ColumnaccAtNetTabX25Addr2 | read-write | mandatory | An alternate DTE address to use for receiving packets via an X.25 virtual circuit. |
| 1.3.6.1.4.1.5.1.1.28.6.1.6 | ColumnaccAtNetTabX25Idle | read-write | mandatory | The interval which governs how long an X.25 circuit can be idle before it is cleared. |
| 1.3.6.1.4.1.5.1.1.28.6.1.7 | ColumnaccAtNetTabX25PktSize | read-write | mandatory | The desired packet size to be negotiated during X.25 call establishment. pktsize1(0), pktsize2(16), pktsize3(32), pktsize4(64), pktsize5(128), pktsize6(256), p… |
| 1.3.6.1.4.1.5.1.1.28.6.1.8 | ColumnaccAtNetTabX25WinSize | read-write | mandatory | The desired window size to be negotiated during X.25 call establishment. |
| 1.3.6.1.4.1.5.1.1.28.6.1.9 | ColumnaccAtNetTabX25FacIndex | read-write | mandatory | Index of optional facility string or zero. |
| 1.3.6.1.4.1.5.1.1.28.7 | TableaccAtPortTable | not-accessible | mandatory | The AppleTalk port table stored in RAM. For each valid network table entry configured in NVM when the port table is initialized (after system reset) there is a… |
| 1.3.6.1.4.1.5.1.1.28.7.1 | RowaccAtPortEntry | not-accessible | mandatory | The information maintained in RAM for a particular logical port. |
| 1.3.6.1.4.1.5.1.1.28.7.1.1 | ColumnaccAtPortTabIndex | read-only | mandatory | The logical port number. Only ports which were defined prior to the last system reset and whose configuration entries contained valid parameters are initialize… |
| 1.3.6.1.4.1.5.1.1.28.7.1.2 | ColumnaccAtPortTabNetAddr | read-only | mandatory | The ports DDP network address consisting of a 16-bit AppleTalk network number and 8-bit node id. This address is determined dynamically during port start up an… |
| 1.3.6.1.4.1.5.1.1.28.7.1.3 | ColumnaccAtPortTabState | read-only | mandatory | The operational state of the port. |
| 1.3.6.1.4.1.5.1.1.28.7.1.4 | ColumnaccAtPortTabDescr | read-only | mandatory | Displayable text describing the type of logical port. |
| 1.3.6.1.4.1.5.1.1.28.7.1.5 | ColumnaccAtPortTabErrCode | read-only | mandatory | An error code indicating why the logical port has been disabled. This value is set when the operational state (accAtPortTabState) of a port is set to error(11)… |
| 1.3.6.1.4.1.5.1.1.28.7.1.6 | ColumnaccAtPortTabErrTime | read-only | mandatory | The time (relative to the last system reset) at which the port became disabled. |
| 1.3.6.1.4.1.5.1.1.28.7.1.7 | ColumnaccAtPortTabErrAddr | read-only | mandatory | The DDP network address of a neighboring router or AppleTalk node which was the source of information causing the port to become disabled. The DDP address cons… |
| 1.3.6.1.4.1.5.1.1.28.7.1.8 | ColumnaccAtPortTabErrDescr | read-only | mandatory | Displayable text which describes why the port has been disabled. |
| 1.3.6.1.4.1.5.1.1.28.7.1.9 | ColumnaccAtPortTabErrCount | read-only | mandatory | The number of subsequent errors which have been detected while a port is disabled. |
| 1.3.6.1.4.1.5.1.1.28.8 | TableaccAtPortStatsTable | not-accessible | mandatory | Datagram Delivery Protocol (DDP) statistics maintained and reported on a per-port basis. |
| 1.3.6.1.4.1.5.1.1.28.8.1 | RowaccAtPortStatsEntry | not-accessible | mandatory | The DDP statistics maintained for a particular logical port. |
| 1.3.6.1.4.1.5.1.1.28.8.1.1 | ColumnaccAtPortStatsInTotals | read-only | mandatory | The total number of DDP packets received via the port. |
| 1.3.6.1.4.1.5.1.1.28.8.1.2 | ColumnaccAtPortStatsInShorts | read-only | mandatory | The total number of DDP packets received with short headers. |
| 1.3.6.1.4.1.5.1.1.28.8.1.3 | ColumnaccAtPortStatsNotForMes | read-only | mandatory | The number of Phase 1 unicast packets received with a LLAP header whose destination node id did not match that of the receiving port. |
| 1.3.6.1.4.1.5.1.1.28.8.1.4 | ColumnaccAtPortStatsTooShorts | read-only | mandatory | The number of DDP packets received whose length was less than that of a DDP header or whose physical length was less than the logical length. |
| 1.3.6.1.4.1.5.1.1.28.8.1.5 | ColumnaccAtPortStatsTooLongs | read-only | mandatory | The number of of DDP packets received whose length exceeded the maximum datagram size or whose physical length was greater than the logical length. |
| 1.3.6.1.4.1.5.1.1.28.8.1.6 | ColumnaccAtPortStatsChksums | read-only | mandatory | The number of DDP packets received with an invalid checksum. |
| 1.3.6.1.4.1.5.1.1.28.8.1.7 | ColumnaccAtPortStatsNotMyNets | read-only | mandatory | The number of DDP broadcast packets received whose destination network number was within the range of the connected network but which did not match the network… |
| 1.3.6.1.4.1.5.1.1.28.8.1.8 | ColumnaccAtPortStatsInFwdReqs | read-only | mandatory | The number of DDP packets received which were not addressed to the receiving port (although some may have been addressed to another port on the same router). |
| 1.3.6.1.4.1.5.1.1.28.8.1.9 | ColumnaccAtPortStatsFwdBcasts | read-only | mandatory | The number of DDP broadcast packets receive whose destination network number was not within the range of the connected network. |
| 1.3.6.1.4.1.5.1.1.28.8.1.10 | ColumnaccAtPortStatsNoFwdRoutes | read-only | mandatory | The number of DDP packets received for which no route to the destination network existed. |
| 1.3.6.1.4.1.5.1.1.28.8.1.11 | ColumnaccAtPortStatsHopCounts | read-only | mandatory | The number of DDP packets received which were discarded because the hop count had exceeded the maximum value. |
| 1.3.6.1.4.1.5.1.1.28.8.1.12 | ColumnaccAtPortStatsReflects | read-only | mandatory | The number of DDP packets received which were addressed to another node on the same network. |
| 1.3.6.1.4.1.5.1.1.28.8.1.13 | ColumnaccAtPortStatsOutTotals | read-only | mandatory | The total number of DDP packets sent via the port. |
| 1.3.6.1.4.1.5.1.1.28.8.1.14 | ColumnaccAtPortStatsOutShorts | read-only | mandatory | The number of DDP packets send with short headers. |
| 1.3.6.1.4.1.5.1.1.28.8.1.15 | ColumnaccAtPortStatsOutFwdReqs | read-only | mandatory | The number of DDP packets forwarded to this port from all other ports. |
| 1.3.6.1.4.1.5.1.1.28.8.1.16 | ColumnaccAtPortStatsInErrors | read-only | mandatory | The number of DDP packets received which could not be processed because of some internal error. |
| 1.3.6.1.4.1.5.1.1.28.8.1.17 | ColumnaccAtPortStatsOutErrors | read-only | mandatory | The number of DDP packets which could not be sent because of some internal error. |
| 1.3.6.1.4.1.5.1.1.28.9 | NodeaccAtRtmpStats | |||
| 1.3.6.1.4.1.5.1.1.28.9.1 | ScalaraccAtRtmpStatsInRequests | read-only | mandatory | The number of RTMP request packets received. |
| 1.3.6.1.4.1.5.1.1.28.9.2 | ScalaraccAtRtmpStatsInDataReqs | read-only | mandatory | The number of RTMP route data request packets received. |
| 1.3.6.1.4.1.5.1.1.28.9.3 | ScalaraccAtRtmpStatsInResponses | read-only | mandatory | The number of RTMP response packets received. |
| 1.3.6.1.4.1.5.1.1.28.9.4 | ScalaraccAtRtmpStatsInDataResps | read-only | mandatory | The number of RTMP route data response packets received. |
| 1.3.6.1.4.1.5.1.1.28.9.5 | ScalaraccAtRtmpStatsOutRequests | read-only | mandatory | The number of RTMP request packets sent. |
| 1.3.6.1.4.1.5.1.1.28.9.6 | ScalaraccAtRtmpStatsOutDataReqs | read-only | mandatory | The number of RTMP route data request packets sent. |
| 1.3.6.1.4.1.5.1.1.28.9.7 | ScalaraccAtRtmpStatsOutResponses | read-only | mandatory | The number of RTMP response packets sent. |
| 1.3.6.1.4.1.5.1.1.28.9.8 | ScalaraccAtRtmpStatsOutDataResps | read-only | mandatory | The number of RTMP route data response packets sent. |
| 1.3.6.1.4.1.5.1.1.28.9.9 | ScalaraccAtRtmpStatsNetConflicts | read-only | mandatory | The number of RTMP packets received which conflicted with the network number range configured for the receiving port or garnered from another router. |
| 1.3.6.1.4.1.5.1.1.28.9.10 | ScalaraccAtRtmpStatsInErrors | read-only | mandatory | The number of RTMP packets received containing a format error or which could not be processed because of some internal error. |
| 1.3.6.1.4.1.5.1.1.28.9.11 | ScalaraccAtRtmpStatsOutErrors | read-only | mandatory | The number of RTMP packets which could not be sent because of some internal error. |
| 1.3.6.1.4.1.5.1.1.28.10 | NodeaccAtRdbStats | |||
| 1.3.6.1.4.1.5.1.1.28.10.1 | ScalaraccAtRdbStatsCacheds | read-only | mandatory | The number of times the desired route was already cached. |
| 1.3.6.1.4.1.5.1.1.28.10.2 | ScalaraccAtRdbStatsSearchs | read-only | mandatory | The number of times the desired route was not cached and the routing database had to be searched. |
| 1.3.6.1.4.1.5.1.1.28.10.3 | ScalaraccAtRdbStatsNoRoutes | read-only | mandatory | The number of times no route could be found to the destination network. |
| 1.3.6.1.4.1.5.1.1.28.10.4 | ScalaraccAtRdbStatsAdds | read-only | mandatory | The number of times a new network was added to the routing database. |
| 1.3.6.1.4.1.5.1.1.28.10.5 | ScalaraccAtRdbStatsUpdates | read-only | mandatory | The number of times an existing route was updated. |
| 1.3.6.1.4.1.5.1.1.28.10.6 | ScalaraccAtRdbStatsDeletes | read-only | mandatory | The number of times a route was deleted from the routing database. |
| 1.3.6.1.4.1.5.1.1.28.11 | NodeaccAtNbpStats | |||
| 1.3.6.1.4.1.5.1.1.28.11.1 | ScalaraccAtNbpStatsInBrReqs | read-only | mandatory | The number of NBP broadcast request packets received. |
| 1.3.6.1.4.1.5.1.1.28.11.2 | ScalaraccAtNbpStatsInLkUpReqs | read-only | mandatory | The number of NBP lookup request packets received. |
| 1.3.6.1.4.1.5.1.1.28.11.3 | ScalaraccAtNbpStatsInLkUpResps | read-only | mandatory | The number of NBP lookup response packets received. |
| 1.3.6.1.4.1.5.1.1.28.11.4 | ScalaraccAtNbpStatsInFwdReqs | read-only | mandatory | The number of NBP forward request packets received. |
| 1.3.6.1.4.1.5.1.1.28.11.5 | ScalaraccAtNbpStatsOutBrReqs | read-only | mandatory | The number of NBP broadcast request packets sent. |
| 1.3.6.1.4.1.5.1.1.28.11.6 | ScalaraccAtNbpStatsOutLkUpReqs | read-only | mandatory | The number of NBP lookup request packets sent. |
| 1.3.6.1.4.1.5.1.1.28.11.7 | ScalaraccAtNbpStatsOutLkUpResps | read-only | mandatory | The number of NBP lookup response packets sent. |
| 1.3.6.1.4.1.5.1.1.28.11.8 | ScalaraccAtNbpStatsOutFwdReqs | read-only | mandatory | The number of NBP forward request packets sent. |
| 1.3.6.1.4.1.5.1.1.28.11.9 | ScalaraccAtNbpStatsNoZones | read-only | mandatory | The number of NBP request packets received which referenced a zone name which was not in the zone database. |
| 1.3.6.1.4.1.5.1.1.28.11.10 | ScalaraccAtNbpStatsInErrors | read-only | mandatory | The number of NBP packets received which were invalid or which could not be processed because of some internal error. |
| 1.3.6.1.4.1.5.1.1.28.11.11 | ScalaraccAtNbpStatsOutErrors | read-only | mandatory | The number of NBP packets which could not be sent because of some internal error. |
| 1.3.6.1.4.1.5.1.1.28.12 | NodeaccAtZipStats | |||
| 1.3.6.1.4.1.5.1.1.28.12.1 | ScalaraccAtZipStatsInQuerys | read-only | mandatory | The number of ZIP zone-list-query packets received. |
| 1.3.6.1.4.1.5.1.1.28.12.2 | ScalaraccAtZipStatsInReplies | read-only | mandatory | The number of ZIP zone-list-reply packets received. |
| 1.3.6.1.4.1.5.1.1.28.12.3 | ScalaraccAtZipStatsInExtReplies | read-only | mandatory | The number of ZIP extended zone-list-reply packets received. |
| 1.3.6.1.4.1.5.1.1.28.12.4 | ScalaraccAtZipStatsInInfoReqs | read-only | mandatory | The number of ZIP get-network-information request packets received. |
| 1.3.6.1.4.1.5.1.1.28.12.5 | ScalaraccAtZipStatsInInfoReps | read-only | mandatory | The number of ZIP get-network-information reply packets received. |
| 1.3.6.1.4.1.5.1.1.28.12.6 | ScalaraccAtZipStatsInTakeDowns | read-only | mandatory | The number of ZIP take-down request packets received. |
| 1.3.6.1.4.1.5.1.1.28.12.7 | ScalaraccAtZipStatsInBringUps | read-only | mandatory | The number of ZIP bring-up request packets received. |
| 1.3.6.1.4.1.5.1.1.28.12.8 | ScalaraccAtZipStatsInNotifies | read-only | mandatory | The number of ZIP notify request packets received. |
| 1.3.6.1.4.1.5.1.1.28.12.9 | ScalaraccAtZipStatsInGetZLReqs | read-only | mandatory | The number of ZIP get-zone-list request packets received. |
| 1.3.6.1.4.1.5.1.1.28.12.10 | ScalaraccAtZipStatsInGetLZReqs | read-only | mandatory | The number of ZIP get-local-zones request packets received. |
| 1.3.6.1.4.1.5.1.1.28.12.11 | ScalaraccAtZipStatsInGetMZReqs | read-only | mandatory | The number of ZIP get-my-zone request packets received. |
| 1.3.6.1.4.1.5.1.1.28.12.12 | ScalaraccAtZipStatsOutQueries | read-only | mandatory | The number of ZIP zone-list-query packets sent. |
| 1.3.6.1.4.1.5.1.1.28.12.13 | ScalaraccAtZipStatsOutReplies | read-only | mandatory | The number of ZIP zone-list-reply packets sent. |
| 1.3.6.1.4.1.5.1.1.28.12.14 | ScalaraccAtZipStatsOutExtReplies | read-only | mandatory | The number of ZIP extended zone-list-reply packets sent. |
| 1.3.6.1.4.1.5.1.1.28.12.15 | ScalaraccAtZipStatsOutInfoReqs | read-only | mandatory | The number of ZIP get-network-information request packets sent. |
| 1.3.6.1.4.1.5.1.1.28.12.16 | ScalaraccAtZipStatsOutInfoReps | read-only | mandatory | The number of ZIP get-network-information reply packets sent. |
| 1.3.6.1.4.1.5.1.1.28.12.17 | ScalaraccAtZipStatsOutGetZLReps | read-only | mandatory | The number of get-zone-list reply packets sent. |
| 1.3.6.1.4.1.5.1.1.28.12.18 | ScalaraccAtZipStatsOutGetLZReps | read-only | mandatory | The number of get-local-zones reply packets sent. |
| 1.3.6.1.4.1.5.1.1.28.12.19 | ScalaraccAtZipStatsOutGetMZReps | read-only | mandatory | The number of get-my-zone reply packets sent. |
| 1.3.6.1.4.1.5.1.1.28.12.20 | ScalaraccAtZipStatsZoneConflicts | read-only | mandatory | The number of ZIP packets received which conflicted with zone list or default zone information configured for the receiving port or garnered from another route… |
| 1.3.6.1.4.1.5.1.1.28.12.21 | ScalaraccAtZipStatsInErrors | read-only | mandatory | The number of ZIP packets received containing a formatting error or which could not be processed because of some internal error. |
| 1.3.6.1.4.1.5.1.1.28.12.22 | ScalaraccAtZipStatsOutErrors | read-only | mandatory | The number of ZIP packets which could not be sent because of some internal error. |
| 1.3.6.1.4.1.5.1.1.28.13 | NodeaccAtAepStats | |||
| 1.3.6.1.4.1.5.1.1.28.13.1 | ScalaraccAtAepStatsInErrors | read-only | mandatory | The number of AEP packets received which were invalid or which could not be processed because of some internal error. |
| 1.3.6.1.4.1.5.1.1.28.13.2 | ScalaraccAtAepStatsOutErrors | read-only | mandatory | The number of AEP packets which could not be sent because of some internal error. |
| 1.3.6.1.4.1.5.1.1.28.14 | TableaccAtZoneListTable | not-accessible | mandatory | The zones list table for directly-connected AppleTalk networks. AppleTalk networks which are configured in the network table have their zones list configured h… |
| 1.3.6.1.4.1.5.1.1.28.14.1 | RowaccAtZoneListEntry | not-accessible | mandatory | An entry defining a zone name for some directly connected AppleTalk network. |
| 1.3.6.1.4.1.5.1.1.28.14.1.1 | ColumnaccAtZoneListPort | read-only | mandatory | The logical port number. |
| 1.3.6.1.4.1.5.1.1.28.14.1.2 | ColumnaccAtZoneListStatus | read-write | mandatory | The status of the zone list entry. If set to default(2), the entry defines the default zone. Entries are deleted by setting the entry status to invalid(3). |
| 1.3.6.1.4.1.5.1.1.28.14.1.3 | ColumnaccAtZoneListName | read-only | mandatory | The zone name. Zone names can contain up to 32 case-insensitive characters from the Apple Macintosh character set. |
| 1.3.6.1.4.1.5.1.1.28.15 | TableaccAtZoneBynameTable | not-accessible | mandatory | Used to display entries in the Zone Information Table (ZIT) which are associated with a particular zone name. |
| 1.3.6.1.4.1.5.1.1.28.15.1 | RowaccAtZoneBynameEntry | not-accessible | mandatory | An entry in the zone information table (ZIT) with a given zone name. |
| 1.3.6.1.4.1.5.1.1.28.15.1.1 | ColumnaccAtZoneBynameNetMin | read-only | mandatory | The 16-bit range start value for an AppleTalk network. |
| 1.3.6.1.4.1.5.1.1.28.15.1.2 | ColumnaccAtZoneBynameNetMax | read-only | mandatory | The 16-bit range end value for an AppleTalk network. |
| 1.3.6.1.4.1.5.1.1.28.15.1.3 | ColumnaccAtZoneBynameName | read-only | mandatory | The AppleTalk zone name. |
| 1.3.6.1.4.1.5.1.1.28.16 | TableaccAtZoneBynetTable | not-accessible | mandatory | Used to display entries in the Zone Information Table (ZIT) which are associated with a particular AppleTalk network. |
| 1.3.6.1.4.1.5.1.1.28.16.1 | RowaccAtZoneBynetEntry | not-accessible | mandatory | An entry in the zone information table (ZIT) associated with a given AppleTalk network. |
| 1.3.6.1.4.1.5.1.1.28.16.1.1 | ColumnaccAtZoneBynetNetMin | read-only | mandatory | The 16-bit range start value for an AppleTalk network. |
| 1.3.6.1.4.1.5.1.1.28.16.1.2 | ColumnaccAtZoneBynetNetMax | read-only | mandatory | The 16-bit range end value for an AppleTalk network. |
| 1.3.6.1.4.1.5.1.1.28.16.1.3 | ColumnaccAtZoneBynetName | read-only | mandatory | The AppleTalk zone name. |
| 1.3.6.1.4.1.5.1.1.28.17 | TableaccAtForwardFilterTable | not-accessible | mandatory | A list of descriptions of specific AppleTalk Filters. |
| 1.3.6.1.4.1.5.1.1.28.17.1 | RowaccAtForwardFilterEntry | not-accessible | mandatory | The parameters for a single AppleTalk Filter. |
| 1.3.6.1.4.1.5.1.1.28.17.1.1 | ColumnaccAtForwardFilterToMin | read-write | mandatory | The least value in the destination network address range. |
| 1.3.6.1.4.1.5.1.1.28.17.1.2 | ColumnaccAtForwardFilterToMax | read-write | mandatory | The greatest value in the destination network address range. |
| 1.3.6.1.4.1.5.1.1.28.17.1.3 | ColumnaccAtForwardFilterFromMin | read-write | mandatory | The least value in the source network address range. |
| 1.3.6.1.4.1.5.1.1.28.17.1.4 | ColumnaccAtForwardFilterFromMax | read-write | mandatory | The greatest value in the source network address range. |
| 1.3.6.1.4.1.5.1.1.28.17.1.5 | ColumnaccAtForwardFilterSocketMin | read-write | mandatory | The least value in the range of affected sockets. |
| 1.3.6.1.4.1.5.1.1.28.17.1.6 | ColumnaccAtForwardFilterSocketMax | read-write | mandatory | The greatest value in the range of affected sockets. |
| 1.3.6.1.4.1.5.1.1.28.17.1.7 | ColumnaccAtForwardFilterType | read-write | mandatory | The affected message types. Name Binding Protocol messages are called out separately, as some applications call for selective discrimination. |
| 1.3.6.1.4.1.5.1.1.28.17.1.8 | ColumnaccAtForwardFilterDisposition | read-write | mandatory | Upon a filter match, this specifies the action taken. |
| 1.3.6.1.4.1.5.1.1.28.17.1.9 | ColumnaccAtForwardFilterStatus | read-write | mandatory | Writing 'invalid' deletes the filter table entry. |
| 1.3.6.1.4.1.5.1.1.28.18 | TableaccAtRouteFilterTable | not-accessible | mandatory | A list of Route Filters. |
| 1.3.6.1.4.1.5.1.1.28.18.1 | RowaccAtRouteFilterEntry | not-accessible | mandatory | A single Route Filter. |
| 1.3.6.1.4.1.5.1.1.28.18.1.1 | ColumnaccAtRouteFilterRouterMin | read-write | mandatory | The least affected Router's Network Address. |
| 1.3.6.1.4.1.5.1.1.28.18.1.2 | ColumnaccAtRouteFilterRouterMax | read-write | mandatory | The greatest affected Router's Network Address. |
| 1.3.6.1.4.1.5.1.1.28.18.1.3 | ColumnaccAtRouteFilterRangeMin | read-write | mandatory | The least Network Address in this range. |
| 1.3.6.1.4.1.5.1.1.28.18.1.4 | ColumnaccAtRouteFilterRangeMax | read-write | mandatory | The greatest Network Address in this range. |
| 1.3.6.1.4.1.5.1.1.28.18.1.5 | ColumnaccAtRouteFilterDisposition | read-write | mandatory | What is to be done with matching advertisements. |
| 1.3.6.1.4.1.5.1.1.28.18.1.6 | ColumnaccAtRouteFilterStatus | read-write | mandatory | Writing 'invalid' has the effect of deleting the filter. |