ACC-ATMVP
81 objects
No module-level DESCRIPTION found.
Imported Objects
| ACC-MIB | accBRG DisplayString IfIndex RowStatus SmdsAddress |
| ACC-SYSTEM | accSysInfo accTrapLogSeqNum |
| RFC1155-SMI | Counter OBJECT-TYPE |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5.1.1.73 | NodeaccAtmVp | |||
| 1.3.6.1.4.1.5.1.1.73.1 | TableaccVpTable | not-accessible | mandatory | The Virtual port table. |
| 1.3.6.1.4.1.5.1.1.73.1.1 | RowaccVpEntry | not-accessible | mandatory | An entry in the virtual port table. |
| 1.3.6.1.4.1.5.1.1.73.1.1.1 | ColumnoVirtualPortName | read-only | mandatory | IfIndex for virtual port. |
| 1.3.6.1.4.1.5.1.1.73.1.1.2 | ColumnoVirtualPortAdminState | read-write | mandatory | The Admin state of a virtual port. |
| 1.3.6.1.4.1.5.1.1.73.1.1.3 | ColumnoVirtualPortOperState | read-only | mandatory | The operational state of a virtual port. |
| 1.3.6.1.4.1.5.1.1.73.1.1.4 | ColumnoVirtualPortProtocol | read-only | mandatory | The protocol used over a virtual port. |
| 1.3.6.1.4.1.5.1.1.73.1.1.5 | ColumnoVirtualPortQueueMode | read-only | mandatory | Queuing mode used. Currently only EXPRESS queueing. |
| 1.3.6.1.4.1.5.1.1.73.1.1.6 | ColumnoVirtualPortCongestion | read-only | mandatory | The congestion percent. |
| 1.3.6.1.4.1.5.1.1.73.1.1.7 | ColumnoVirtualPortPhysicalPort | read-only | mandatory | The physical port associated with a virtual port. |
| 1.3.6.1.4.1.5.1.1.73.2 | NodeaccAtmVpScalarGrp | |||
| 1.3.6.1.4.1.5.1.1.73.2.1 | ScalaroVirtualPortCount1483Br | read-write | mandatory | The RFC1483 virtual port count. |
| 1.3.6.1.4.1.5.1.1.73.2.2 | ScalaroVirtualPortCountCIP | read-write | mandatory | The CIP virtual port count. |
| 1.3.6.1.4.1.5.1.1.73.2.3 | ScalaroVirtualPortCountTunnel | read-write | mandatory | The Tunnel virtual port count. |
| 1.3.6.1.4.1.5.1.1.73.2.4 | ScalaroVirtualPortCountFrf | read-write | mandatory | The FRF virtual port count. |
| 1.3.6.1.4.1.5.1.1.73.2.6 | ScalaroVirtualPortCountPpp | read-write | mandatory | The PPP over ATM virtual port count. |
| 1.3.6.1.4.1.5.1.1.73.2.7 | ScalaroVirtualPortCountVFR | read-write | mandatory | The Virtual Frame Relay virtual port count. |
| 1.3.6.1.4.1.5.1.1.73.2.8 | ScalaroVirtualPortCountXOT | read-write | mandatory | The XOT virtual port count. |
| 1.3.6.1.4.1.5.1.1.73.3 | NodeaccAtmVpStatsGrp | |||
| 1.3.6.1.4.1.5.1.1.73.3.1 | TableaccVpStatTable | not-accessible | mandatory | The virtual port statistics table. |
| 1.3.6.1.4.1.5.1.1.73.3.1.1 | RowaccVpStatEntry | not-accessible | mandatory | An entry in the virtual port statistics table. |
| 1.3.6.1.4.1.5.1.1.73.3.1.1.1 | ColumnoVpStatName | read-only | mandatory | ifIndex of the Virtual port. |
| 1.3.6.1.4.1.5.1.1.73.3.1.1.2 | ColumnoVpStatInPackets | read-only | mandatory | Received packets. |
| 1.3.6.1.4.1.5.1.1.73.3.1.1.3 | ColumnoVpStatOutPackets | read-only | mandatory | Packets sent out. |
| 1.3.6.1.4.1.5.1.1.73.3.1.1.4 | ColumnoVpStatInOctets | read-only | mandatory | Octets received. |
| 1.3.6.1.4.1.5.1.1.73.3.1.1.5 | ColumnoVpStatOutOctets | read-only | mandatory | Octets sent out. |
| 1.3.6.1.4.1.5.1.1.73.3.1.1.6 | ColumnoVpStatInDiscards | read-only | mandatory | Number of receive discards. |
| 1.3.6.1.4.1.5.1.1.73.3.1.1.7 | ColumnoVpStatOutDiscards | read-only | mandatory | Number of transmit discards. |
| 1.3.6.1.4.1.5.1.1.73.3.1.1.8 | ColumnoVpStatNumChangeds | read-only | mandatory | Number of changes. |
| 1.3.6.1.4.1.5.1.1.73.3.1.1.9 | ColumnoVpStatInErrs | read-only | mandatory | Number of received packets in error. |
| 1.3.6.1.4.1.5.1.1.73.3.1.1.10 | ColumnoVpStatOutErrs | read-only | mandatory | Number of packets attempted to transmit that were in error. |
| 1.3.6.1.4.1.5.1.1.73.4 | NodeaccAtmVpFrfGrp | |||
| 1.3.6.1.4.1.5.1.1.73.4.1 | TablevpAtmFrfTable | not-accessible | mandatory | The FRF (Frame relay network interworking over ATM) table. |
| 1.3.6.1.4.1.5.1.1.73.4.1.1 | RowvpAtmFrfEntry | not-accessible | mandatory | An entry in the FRF table. |
| 1.3.6.1.4.1.5.1.1.73.4.1.1.1 | ColumnoVpAtmFrfName | read-only | mandatory | The internal name for this port |
| 1.3.6.1.4.1.5.1.1.73.4.1.1.2 | ColumnoVpAtmFrfRetryTimer | read-write | mandatory | The amount of time before retrying to reconnect the circuit |
| 1.3.6.1.4.1.5.1.1.73.4.1.1.3 | ColumnoVpAtmFrfRetryCount | read-write | mandatory | The number of times to retry the connection before declaring that the circuit is down |
| 1.3.6.1.4.1.5.1.1.73.4.1.1.4 | ColumnoVpAtmFrfDlciLimit | read-write | mandatory | The number of DLCI that can be active on this port |
| 1.3.6.1.4.1.5.1.1.73.4.1.1.5 | ColumnoVpAtmFrfAddrLength | read-write | mandatory | The Frame Relay address length for this port |
| 1.3.6.1.4.1.5.1.1.73.4.1.1.6 | ColumnoVpAtmFrfPvcDlciStart | read-write | mandatory | The starting DLCI number for this port |
| 1.3.6.1.4.1.5.1.1.73.4.1.1.7 | ColumnoVpAtmFrfPvcDlciEnd | read-write | mandatory | The ending DLCI number for this port |
| 1.3.6.1.4.1.5.1.1.73.4.1.1.8 | ColumnoVpAtmFrfPvcVpi | read-write | mandatory | The VPI for the circuit that needs to be created over this port |
| 1.3.6.1.4.1.5.1.1.73.4.1.1.9 | ColumnoVpAtmFrfPvcVci | read-write | mandatory | The VCI for the circuit that needs to be created overt his port |
| 1.3.6.1.4.1.5.1.1.73.4.1.1.10 | ColumnoVpAtmFrfCongTimeOut | read-write | mandatory | The amount of time that needs to elapse in seconds before declaring that the circuit is down due to congestion |
| 1.3.6.1.4.1.5.1.1.73.4.1.1.11 | ColumnoVpAtmFrfCellLossPrioIn | read-write | mandatory | The CLP for incoming cells |
| 1.3.6.1.4.1.5.1.1.73.4.1.1.12 | ColumnoVpAtmFrfCellLossPrioOut | read-write | mandatory | The CLP for outgoing cells |
| 1.3.6.1.4.1.5.1.1.73.4.1.1.13 | ColumnoVpAtmFrfClpMode | read-write | mandatory | The CLP mode for mapping from the DE bit |
| 1.3.6.1.4.1.5.1.1.73.5 | NodeaccAtmVpPppGrp | |||
| 1.3.6.1.4.1.5.1.1.73.5.1 | TablevpAtmPppTable | not-accessible | mandatory | The PPP over ATM configuration table. |
| 1.3.6.1.4.1.5.1.1.73.5.1.1 | RowvpAtmPppEntry | not-accessible | mandatory | An entry in the PPP over ATM configuration table. |
| 1.3.6.1.4.1.5.1.1.73.5.1.1.1 | ColumnoVpAtmPppName | read-only | mandatory | The internal name for this port |
| 1.3.6.1.4.1.5.1.1.73.5.1.1.2 | ColumnoVpAtmPppRetryTimer | read-write | mandatory | The amount of time to wait before retrying the connection |
| 1.3.6.1.4.1.5.1.1.73.5.1.1.3 | ColumnoVpAtmPppRetryCount | read-write | mandatory | The number of time to retry for the connection if it not up |
| 1.3.6.1.4.1.5.1.1.73.5.1.1.4 | ColumnoVpAtmPppVpi | read-write | mandatory | The VPI for the circuit that needs to be created over this port |
| 1.3.6.1.4.1.5.1.1.73.5.1.1.5 | ColumnoVpAtmPppVci | read-write | mandatory | The VCI for the circuit that needs to be created over this port |
| 1.3.6.1.4.1.5.1.1.73.5.1.1.6 | ColumnoVpAtmPppCongTimeOut | read-write | mandatory | The amount of time to wait for the congestion to clear out before declaring the circuit to be down |
| 1.3.6.1.4.1.5.1.1.73.5.1.1.7 | ColumnoVpAtmPppMuxType | read-write | mandatory | The multiplexing that needs to be done over this port |
| 1.3.6.1.4.1.5.1.1.73.6 | NodeaccAtmVp1483Grp | |||
| 1.3.6.1.4.1.5.1.1.73.6.1 | TablevpAtm1483Table | not-accessible | mandatory | The RFC1483 configuration table. |
| 1.3.6.1.4.1.5.1.1.73.6.1.1 | RowvpAtm1483Entry | not-accessible | mandatory | An entry in the RFC1483 configuration table. |
| 1.3.6.1.4.1.5.1.1.73.6.1.1.1 | ColumnoVpAtm1483Name | read-only | mandatory | The internal name for this port |
| 1.3.6.1.4.1.5.1.1.73.6.1.1.2 | ColumnoVpAtm1483RetryTimer | read-write | mandatory | The amount of time to wait before retrying the connection |
| 1.3.6.1.4.1.5.1.1.73.6.1.1.3 | ColumnoVpAtm1483RetryCount | read-write | mandatory | The number of time to retry for the connection if it not up |
| 1.3.6.1.4.1.5.1.1.73.6.1.1.4 | ColumnoVpAtm1483Vpi | read-write | mandatory | The VPI for the circuit that needs to be created over this port |
| 1.3.6.1.4.1.5.1.1.73.6.1.1.5 | ColumnoVpAtm1483Vci | read-write | mandatory | The VCI for the circuit that needs to be created over this port |
| 1.3.6.1.4.1.5.1.1.73.6.1.1.6 | ColumnoVpAtm1483CongTimeOut | read-write | mandatory | The amount of time to wait for the congestion to clear out before declaring the circuit to be down |
| 1.3.6.1.4.1.5.1.1.73.6.1.1.7 | ColumnoVpAtm1483MuxType | read-write | mandatory | The multiplexing that needs to be done over this port |
| 1.3.6.1.4.1.5.1.1.73.7 | NodeaccAtmVpCipGrp | |||
| 1.3.6.1.4.1.5.1.1.73.7.1 | TablevpAtmCipTable | not-accessible | mandatory | The Classical IP over ATM configuration table. |
| 1.3.6.1.4.1.5.1.1.73.7.1.1 | RowvpAtmCipEntry | not-accessible | mandatory | An entry in the CIP table. |
| 1.3.6.1.4.1.5.1.1.73.7.1.1.1 | ColumnoVpAtmCipName | read-only | mandatory | The internal name for this port |
| 1.3.6.1.4.1.5.1.1.73.7.1.1.2 | ColumnoVpAtmCipRetryTimer | read-write | mandatory | The amount of time to wait before retrying the connection |
| 1.3.6.1.4.1.5.1.1.73.7.1.1.3 | ColumnoVpAtmCipRetryCount | read-write | mandatory | The number of time to retry for the connection if it not up |
| 1.3.6.1.4.1.5.1.1.73.7.1.1.4 | ColumnoVpAtmCipMode | read-write | mandatory | The operation mode for this CIP port |
| 1.3.6.1.4.1.5.1.1.73.7.1.1.5 | ColumnoVpAtmCipAging | read-write | mandatory | The time that needs to elapse in seconds before aging this circuit |
| 1.3.6.1.4.1.5.1.1.73.7.1.1.6 | ColumnoVpAtmCipAddrType | read-write | mandatory | The type of address supported ovwer this port |
| 1.3.6.1.4.1.5.1.1.73.7.1.1.7 | ColumnoVpAtmCipLocalAddress | read-write | mandatory | The local address for this port that is used in identifying this instance on the atm network |
| 1.3.6.1.4.1.5.1.1.73.7.1.1.8 | ColumnoVpAtmCipServerAddress | read-write | mandatory | The address at which the server is reachable |
| 1.3.6.1.4.1.5.1.1.73.7.1.1.9 | ColumnoVpAtmCipServerVccType | read-write | mandatory | The curcuit types the server will be able to accept |
| 1.3.6.1.4.1.5.1.1.73.7.1.1.10 | ColumnoVpAtmCipMtu | read-write | mandatory | The MTU for this port |
| 1.3.6.1.4.1.5.1.1.73.7.1.1.11 | ColumnoVpAtmCipPcr | read-write | mandatory | The PCR to be used for the circuts over this port |