ACC-DN
78 objects
No module-level DESCRIPTION found.
Imported Objects
| ACC-MIB | accBRG DisplayString IfIndex RowStatus SmdsAddress |
| ACC-SYSTEM | accTrapLogSeqNum |
| RFC1155-SMI | Counter OBJECT-TYPE TimeTicks |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5.1.1.19 | NodeaccDn | |||
| 1.3.6.1.4.1.5.1.1.19.1 | ScalaraccDnNumber | read-only | mandatory | Number of DECNET circuits |
| 1.3.6.1.4.1.5.1.1.19.2 | ScalaraccDnID | read-write | mandatory | Node ID; Least 10 bits identify the node, six bits above that identify the area. |
| 1.3.6.1.4.1.5.1.1.19.3 | ScalaraccDnMaxNode | read-write | mandatory | Maximum node number permitted in the local area |
| 1.3.6.1.4.1.5.1.1.19.4 | ScalaraccDnMaxArea | read-write | mandatory | Maximum area number permitted |
| 1.3.6.1.4.1.5.1.1.19.5 | ScalaraccDnMaxAdjRtr | read-write | mandatory | Maximum number of adjacent routers |
| 1.3.6.1.4.1.5.1.1.19.6 | ScalaraccDnMaxEndNode | read-write | mandatory | Maximum number of broadcast endnode adjacencies |
| 1.3.6.1.4.1.5.1.1.19.7 | ScalaraccDnMaxLocHop | read-write | mandatory | Maximum number of hops allowed within this area |
| 1.3.6.1.4.1.5.1.1.19.8 | ScalaraccDnMaxLocCost | read-write | mandatory | Maximum cost allowed on a path within this area |
| 1.3.6.1.4.1.5.1.1.19.9 | ScalaraccDnMaxVisit | read-write | mandatory | Maximum number of node visits allowed for a packet |
| 1.3.6.1.4.1.5.1.1.19.10 | ScalaraccDnMaxForHop | read-write | mandatory | Maximum number of hops allowed to another area |
| 1.3.6.1.4.1.5.1.1.19.11 | ScalaraccDnMaxForCost | read-write | mandatory | Maximum cost allowed on a path to another area |
| 1.3.6.1.4.1.5.1.1.19.12 | ScalaraccDnBCT1 | read-write | mandatory | Interval between retranmissions of routing database updates on Broadcast Address |
| 1.3.6.1.4.1.5.1.1.19.13 | ScalaraccDnT1 | read-write | mandatory | Interval between retranmissions of routing database updates non-broadcast |
| 1.3.6.1.4.1.5.1.1.19.14 | ScalaraccDnMsgLev | read-write | mandatory | Message level for generation of trap messages describing DECNET operational phenonomena See Trap level for description |
| 1.3.6.1.4.1.5.1.1.19.15 | ScalaraccDnNodeState | read-write | mandatory | Operational state of the node |
| 1.3.6.1.4.1.5.1.1.19.16 | ScalaraccDnUnreachs | read-only | mandatory | Packets dropped due to node unreachable |
| 1.3.6.1.4.1.5.1.1.19.17 | ScalaraccDnVisitXcds | read-only | mandatory | Packets dropped due to visits exceeded |
| 1.3.6.1.4.1.5.1.1.19.18 | ScalaraccDnBadNodes | read-only | mandatory | Packets dropped due to illegal node number |
| 1.3.6.1.4.1.5.1.1.19.19 | ScalaraccDnPktOsizes | read-only | mandatory | Packets dropped due to oversize packet |
| 1.3.6.1.4.1.5.1.1.19.20 | ScalaraccDnFmtErrs | read-only | mandatory | Packets dropped due to packet format error |
| 1.3.6.1.4.1.5.1.1.19.21 | TableaccDnCktTable | not-accessible | mandatory | DECnet circuit table Entries are added/deleted via management action. |
| 1.3.6.1.4.1.5.1.1.19.21.1 | RowaccDnCktEntry | not-accessible | mandatory | The instance of an entry is the circuit number. Existing entries can be modified. |
| 1.3.6.1.4.1.5.1.1.19.21.1.1 | ColumnaccDnCktIndex | read-write | mandatory | Circuit number |
| 1.3.6.1.4.1.5.1.1.19.21.1.2 | ColumnaccDnCktStatus | read-write | mandatory | Administrative DECNET state of this circuit |
| 1.3.6.1.4.1.5.1.1.19.21.1.3 | ColumnaccDnCktState | read-only | mandatory | Operational DECNET state of this circuit |
| 1.3.6.1.4.1.5.1.1.19.21.1.4 | ColumnaccDnCktCost | read-write | mandatory | Administrative circuit cost Object will be set to a circuit-type dependent value if not present in entry-adding SET PDU. |
| 1.3.6.1.4.1.5.1.1.19.21.1.5 | ColumnaccDnMaxRtr | read-write | mandatory | Maximum number of routers that can be communicated with over this circuit |
| 1.3.6.1.4.1.5.1.1.19.21.1.6 | ColumnaccDnHelloInt | read-write | mandatory | Interval between transmission of Router Hello messages to other DECNET routers on this circuit |
| 1.3.6.1.4.1.5.1.1.19.21.1.7 | ColumnaccDnRtrPriority | read-write | mandatory | Priority of this Decnet router to become designated router on this circuit. |
| 1.3.6.1.4.1.5.1.1.19.21.1.8 | ColumnaccDnDesRtrId | read-only | mandatory | ID of router which is designated router on this circuit. Lower 10 bits is node number, six bits above that are area number. |
| 1.3.6.1.4.1.5.1.1.19.21.1.9 | ColumnaccDnDesRtrPrio | read-only | mandatory | Priority of router which is designated router on this circuit. |
| 1.3.6.1.4.1.5.1.1.19.21.1.10 | ColumnaccDnTrnPktRecs | read-only | mandatory | Number of transit packets received on this circuit. |
| 1.3.6.1.4.1.5.1.1.19.21.1.11 | ColumnaccDnTrnPktSnds | read-only | mandatory | Number of transit packets sent on this circuit. |
| 1.3.6.1.4.1.5.1.1.19.21.1.12 | ColumnaccDnEndNodePktRecs | read-only | mandatory | Number of end-node packets received on this circuit. |
| 1.3.6.1.4.1.5.1.1.19.21.1.13 | ColumnaccDnEndNodePktSnds | read-only | mandatory | Number of end-node packets sent on this circuit. |
| 1.3.6.1.4.1.5.1.1.19.21.1.14 | ColumnaccDnCktDowns | read-only | mandatory | Number of circuit down events noted on this circuit. |
| 1.3.6.1.4.1.5.1.1.19.21.1.15 | ColumnaccDnCktType | read-write | mandatory | Circuit type Object required in entry-adding SET PDU. |
| 1.3.6.1.4.1.5.1.1.19.21.1.16 | ColumnaccDnCktPort | read-write | mandatory | Physical port that this circuit is on Object required in entry-adding SET PDU. |
| 1.3.6.1.4.1.5.1.1.19.21.1.17 | ColumnaccDnX25InOutAddr | read-write | mandatory | X25 address for other end of circuit; we'll send to this address and will accept packets from this address for this circuit. Object required in entry-adding SE… |
| 1.3.6.1.4.1.5.1.1.19.21.1.18 | ColumnaccDnX25InAddr | read-write | mandatory | Packets from this address are accepted on this circuit. Object will be set to default value if not present in entry-adding SET PDU. |
| 1.3.6.1.4.1.5.1.1.19.21.1.19 | ColumnaccDnX25Idle | read-write | mandatory | Maximum idle time before this circuit is considered unused. Object will be set to default value if not present in entry-adding SET PDU. |
| 1.3.6.1.4.1.5.1.1.19.21.1.20 | ColumnaccDnX25PktVal | read-write | mandatory | Maximum X25 packet size Object will be set to default value if not present in entry-adding SET PDU. |
| 1.3.6.1.4.1.5.1.1.19.21.1.21 | ColumnaccDnX25PktWin | read-write | mandatory | X25 packet window Object will be set to default value if not present in entry-adding SET PDU. |
| 1.3.6.1.4.1.5.1.1.19.21.1.22 | ColumnaccDnEntryStatus | read-write | mandatory | Setting this object to invalid deletes entry |
| 1.3.6.1.4.1.5.1.1.19.21.1.23 | ColumnaccDnX25FacIndex | read-write | mandatory | Index of optional facility string or 0. |
| 1.3.6.1.4.1.5.1.1.19.22 | TableaccDnRtTable | not-accessible | mandatory | DECnet routing table |
| 1.3.6.1.4.1.5.1.1.19.22.1 | RowaccDnRtEntry | not-accessible | mandatory | Detail on specific route |
| 1.3.6.1.4.1.5.1.1.19.22.1.1 | ColumnaccDnRtNode | read-only | mandatory | Destination node |
| 1.3.6.1.4.1.5.1.1.19.22.1.2 | ColumnaccDnRtHops | read-only | mandatory | Number of hops to destination |
| 1.3.6.1.4.1.5.1.1.19.22.1.3 | ColumnaccDnRtCost | read-only | mandatory | Cost to destination |
| 1.3.6.1.4.1.5.1.1.19.22.1.4 | ColumnaccDnRtCkt | read-only | mandatory | Circuit number to use to get to destination |
| 1.3.6.1.4.1.5.1.1.19.22.1.5 | ColumnaccDnRtNextHop | read-only | mandatory | Next router along the way to destination |
| 1.3.6.1.4.1.5.1.1.19.23 | TableaccDnAreaTable | not-accessible | mandatory | DECnet area table. |
| 1.3.6.1.4.1.5.1.1.19.23.1 | RowaccDnAreaEntry | not-accessible | mandatory | Details on specific area |
| 1.3.6.1.4.1.5.1.1.19.23.1.1 | ColumnaccDnAreaArea | read-only | mandatory | Remote area |
| 1.3.6.1.4.1.5.1.1.19.23.1.2 | ColumnaccDnAreaHops | read-only | mandatory | Hops to Remote area |
| 1.3.6.1.4.1.5.1.1.19.23.1.3 | ColumnaccDnAreaCost | read-only | mandatory | Cost to Remote area |
| 1.3.6.1.4.1.5.1.1.19.23.1.4 | ColumnaccDnAreaCkt | read-only | mandatory | Circuit over which remote area can be reached. |
| 1.3.6.1.4.1.5.1.1.19.23.1.5 | ColumnaccDnAreaNextHop | read-only | mandatory | Next hop to remote area. |
| 1.3.6.1.4.1.5.1.1.19.24 | TableaccDnRouteFilterTable | not-accessible | mandatory | The DECNET IV Routes that the Network Manager wants to be careful about. |
| 1.3.6.1.4.1.5.1.1.19.24.1 | RowaccDnRouteFilterEntry | not-accessible | mandatory | A single controlled DECNET Route. |
| 1.3.6.1.4.1.5.1.1.19.24.1.1 | ColumnaccDnRouteFilterAdj | read-write | mandatory | If 0, all adjacent systems. If a DECNET Area with host id 0, all adjacent systems in that area. If a DECNET Host ID, that adjacent system. |
| 1.3.6.1.4.1.5.1.1.19.24.1.2 | ColumnaccDnRouteFilterNode | read-write | mandatory | If 0, all routing information. If a DECNET Area with Host ID 0, relevant level 2 routing information. If a DECNET Host ID, level 1 routing informa- tion for th… |
| 1.3.6.1.4.1.5.1.1.19.24.1.3 | ColumnaccDnRouteFilterDisposition | read-write | mandatory | This variable indicates what to do with the indicated routing information. Where overlaps occur ('accept no routing information from area 3.0 except from route… |
| 1.3.6.1.4.1.5.1.1.19.24.1.4 | ColumnaccDnRouteFilterEntStat | read-write | mandatory | setting this variable to 'invalid' has the ef- fect of invalidating it as of the next system reset. |
| 1.3.6.1.4.1.5.1.1.19.25 | TableaccDnForwardFilterTable | not-accessible | mandatory | The DECNET traffic that the Network Manager wants selectively treated. |
| 1.3.6.1.4.1.5.1.1.19.25.1 | RowaccDnForwardFilterEntry | not-accessible | mandatory | A single set of messages that the Network Manager wants selectively treated. |
| 1.3.6.1.4.1.5.1.1.19.25.1.1 | ColumnaccDnForwardFilterDest | read-write | mandatory | If 0, all DECNET Addresses. If an Area with Host Part 0, all traffic to that Area. If a DECNET Host ID, all traffic to that Host. |
| 1.3.6.1.4.1.5.1.1.19.25.1.2 | ColumnaccDnForwardFilterSource | read-write | mandatory | If 0, all DECNET Traffic. If an Area with Host Part 0, all traffic from that Area. If a DECNET Host ID, all traffic from that Host. |
| 1.3.6.1.4.1.5.1.1.19.25.1.3 | ColumnaccDnForwardFilterDisposition | read-write | mandatory | This variable indicates what is to be done with traffic from accDnForwardFilterSource to accDnForwardFilterDest. When overlaps occur ('discard all traffic from… |
| 1.3.6.1.4.1.5.1.1.19.25.1.4 | ColumnaccDnForwardFilterEntStat | read-write | mandatory | setting accDnForwardFilterEntStat to invalid has the effect of removing the filter on the next system reset. |
| 1.3.6.1.4.1.5.1.1.19.26 | TableaccDnAdjTable | not-accessible | mandatory | The set of systems adjacent to this router. |
| 1.3.6.1.4.1.5.1.1.19.26.1 | RowaccDnAdjEntry | not-accessible | mandatory | One of the systems adjacent to this router. |
| 1.3.6.1.4.1.5.1.1.19.26.1.1 | ColumnaccDnAdjNode | read-only | mandatory | The Host Identifier of the adjacent node. |
| 1.3.6.1.4.1.5.1.1.19.26.1.2 | ColumnaccDnAdjType | read-only | mandatory | The type of DECNET adjacency being sustained. |
| 1.3.6.1.4.1.5.1.1.19.26.1.3 | ColumnaccDnAdjCircuit | read-only | mandatory | The DECNET Circuit Number. |
| 1.3.6.1.4.1.5.1.1.19.26.1.4 | ColumnaccDnAdjState | read-only | mandatory | The state of the adjacency. |