ACC-ISDN
168 objects
No module-level DESCRIPTION found.
Imported Objects
| ACC-MIB | accBRG DisplayString IfIndex RowStatus SmdsAddress |
| ACC-SYSTEM | accTrapLogSeqNum accTrapLogSeverityType |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter Gauge IpAddress OBJECT-TYPE TimeTicks |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5.1.1.36 | NodeaccIsdn | |||
| 1.3.6.1.4.1.5.1.1.36.1 | NodeaccIsdnDsl | |||
| 1.3.6.1.4.1.5.1.1.36.1.1 | ScalaraccIsdnDslIndex | read-only | deprecated | An index instantiating a particular digital subscriber loop interface on this bridge/router terminal. |
| 1.3.6.1.4.1.5.1.1.36.2 | TableaccIsdnSubTable | not-accessible | deprecated | ISDN subscriber table containing configuration and operational parameters for all ISDN subscriber interfaces on this bridge/router terminal. |
| 1.3.6.1.4.1.5.1.1.36.2.1 | RowaccIsdnSubEntry | not-accessible | deprecated | Configuration and operational parameters for a particular ISDN subscriber interface. |
| 1.3.6.1.4.1.5.1.1.36.2.1.1 | ColumnaccIsdnSubSwitchType | read-write | deprecated | The particular type of central-office switch providing access to the ISDN network and to which this subscriber interface is connected. |
| 1.3.6.1.4.1.5.1.1.36.2.1.2 | ColumnaccIsdnSubChannelMode | read-write | deprecated | The ISDN channel configuration mode. |
| 1.3.6.1.4.1.5.1.1.36.2.1.3 | ColumnaccIsdnSubAdminStatus | read-write | deprecated | The administrative status of this subscriber interface. |
| 1.3.6.1.4.1.5.1.1.36.2.1.4 | ColumnaccIsdnSubDiagLevel | read-write | deprecated | The current diagnostic message level for this subscriber interface. |
| 1.3.6.1.4.1.5.1.1.36.2.1.5 | ColumnaccIsdnSubManualTei | read-write | deprecated | The TEI (terminal endpoint identifier) when manual TEI assignment is required. Setting this value between 0 and 63 (inclusive) specifies manual TEI assignment … |
| 1.3.6.1.4.1.5.1.1.36.3 | TableaccIsdnStatTable | not-accessible | deprecated | Statistics and operational status maintained for all ISDN subscriber interfaces on this bridge/router terminal. |
| 1.3.6.1.4.1.5.1.1.36.3.1 | RowaccIsdnStatEntry | not-accessible | deprecated | Statistics and operational status for a particular ISDN subscriber interface. |
| 1.3.6.1.4.1.5.1.1.36.3.1.1 | ColumnaccIsdnStatHdlcInPackets | read-only | deprecated | The number of packets received on the D-channel of this subscriber interface. |
| 1.3.6.1.4.1.5.1.1.36.3.1.2 | ColumnaccIsdnStatHdlcInOctets | read-only | deprecated | The number of octets received on the D-channel of this subscriber interface. |
| 1.3.6.1.4.1.5.1.1.36.3.1.3 | ColumnaccIsdnStatHdlcInErrors | read-only | deprecated | The number of input hardware errors counted by the D-channel input/output driver. |
| 1.3.6.1.4.1.5.1.1.36.3.1.4 | ColumnaccIsdnStatHdlcInDiscs | read-only | deprecated | The number of input packets discarded by the D-channel input/output driver. |
| 1.3.6.1.4.1.5.1.1.36.3.1.5 | ColumnaccIsdnStatHdlcOutPackets | read-only | deprecated | The number of packets transmitted on the D-channel of this subscriber interface. |
| 1.3.6.1.4.1.5.1.1.36.3.1.6 | ColumnaccIsdnStatHdlcOutOctets | read-only | deprecated | The number of octets transmitted on the D-channel of this subscriber interface. |
| 1.3.6.1.4.1.5.1.1.36.3.1.7 | ColumnaccIsdnStatHdlcOutErrors | read-only | deprecated | The number of output hardware errors counted by the D-channel input/output driver. |
| 1.3.6.1.4.1.5.1.1.36.3.1.8 | ColumnaccIsdnStatHdlcOutDiscs | read-only | deprecated | The number of output packets discarded by the D-channel input/output driver. |
| 1.3.6.1.4.1.5.1.1.36.3.1.9 | ColumnaccIsdnStatLapdUnsolicResps | read-only | deprecated | The number of unsolicited LAPD response frames received on all data links associated with the D-channel of this subscriber interface. |
| 1.3.6.1.4.1.5.1.1.36.3.1.10 | ColumnaccIsdnStatLapdPeerSabmes | read-only | deprecated | The number of peer SABME frames received on all data links associated with the D-channel of this subscriber interface. |
| 1.3.6.1.4.1.5.1.1.36.3.1.11 | ColumnaccIsdnStatLapdN200Errors | read-only | deprecated | The number of unsuccessful T200 timer recoveries after a frame has been retransmitted N200 times. |
| 1.3.6.1.4.1.5.1.1.36.3.1.12 | ColumnaccIsdnStatLapdNrSeqErrors | read-only | deprecated | The number of N(R) sequence errors. |
| 1.3.6.1.4.1.5.1.1.36.3.1.13 | ColumnaccIsdnStatLapdRecvdFrmrs | read-only | deprecated | The number of LAPD FRMR response frames received. |
| 1.3.6.1.4.1.5.1.1.36.3.1.14 | ColumnaccIsdnStatLapdCntlErrors | read-only | deprecated | The number of LAPD frames received with an invalid or non-implemented control field. |
| 1.3.6.1.4.1.5.1.1.36.3.1.15 | ColumnaccIsdnStatLapdInfoErrors | read-only | deprecated | The number of LAPD frames received with a non-permitted information (I) field. |
| 1.3.6.1.4.1.5.1.1.36.3.1.16 | ColumnaccIsdnStatLapdWrongSizes | read-only | deprecated | The number of LAPD frames received which were the wrong size. |
| 1.3.6.1.4.1.5.1.1.36.3.1.17 | ColumnaccIsdnStatLapdN201Errors | read-only | deprecated | The number of LAPD frames received which contained and information field which exceeded N201. |
| 1.3.6.1.4.1.5.1.1.36.3.1.18 | ColumnaccIsdnStatCallsOriginateds | read-only | deprecated | The number of outgoing calls originated on this subscriber interface. |
| 1.3.6.1.4.1.5.1.1.36.3.1.19 | ColumnaccIsdnStatCallsOfferreds | read-only | deprecated | The number of incoming calls offerred on this subscriber interface. |
| 1.3.6.1.4.1.5.1.1.36.3.1.20 | ColumnaccIsdnStatCallsAnswereds | read-only | deprecated | The number of outgoing calls originated on this subscriber interface which were answered by the destination. |
| 1.3.6.1.4.1.5.1.1.36.3.1.21 | ColumnaccIsdnStatCallsAccepteds | read-only | deprecated | The number of incoming calls offerred on this subscriber interface which were accepted for connection. |
| 1.3.6.1.4.1.5.1.1.36.3.1.22 | ColumnaccIsdnStatCallsCompleteds | read-only | deprecated | The number of outgoing and incoming calls completed (that is, the number of calls which were successfully connected). |
| 1.3.6.1.4.1.5.1.1.36.3.1.23 | ColumnaccIsdnStatCallsCleareds | read-only | deprecated | The number of outgoing and incoming calls cleared. |
| 1.3.6.1.4.1.5.1.1.36.3.1.24 | ColumnaccIsdnStatDslOperStatus | read-only | deprecated | The operation status of this interface. |
| 1.3.6.1.4.1.5.1.1.36.3.1.25 | ColumnaccIsdnStatLastCauses | read-only | deprecated | The last cause value sent or received on this subscriber interface. |
| 1.3.6.1.4.1.5.1.1.36.4 | TableaccIsdnCallTable | not-accessible | deprecated | Parameters and operational status for ISDN calls active on this bridge/router terminal. |
| 1.3.6.1.4.1.5.1.1.36.4.1 | RowaccIsdnCallEntry | not-accessible | deprecated | Parameters and operational status for a particular ISDN call which is presently active or is in the process of being established or cleared. |
| 1.3.6.1.4.1.5.1.1.36.4.1.1 | ColumnaccIsdnCallIdentifier | read-only | deprecated | The internal call control identifier for this call. |
| 1.3.6.1.4.1.5.1.1.36.4.1.2 | ColumnaccIsdnCallReference | read-only | deprecated | The Q.931 call reference value for this call. |
| 1.3.6.1.4.1.5.1.1.36.4.1.3 | ColumnaccIsdnCallChannelId | read-only | deprecated | The bearer channel interface ID allocated for this call. |
| 1.3.6.1.4.1.5.1.1.36.4.1.4 | ColumnaccIsdnCallIfIndex | read-only | deprecated | The interface index of the physical port connected by the bearer channel. |
| 1.3.6.1.4.1.5.1.1.36.4.1.5 | ColumnaccIsdnCallInfoRate | read-only | deprecated | The information transfer rate. |
| 1.3.6.1.4.1.5.1.1.36.4.1.6 | ColumnaccIsdnCallState | read-only | deprecated | The current call control state (not Q.931). |
| 1.3.6.1.4.1.5.1.1.36.4.1.7 | ColumnaccIsdnCallCause | read-only | deprecated | The last cause value associated with this call. |
| 1.3.6.1.4.1.5.1.1.36.4.1.8 | ColumnaccIsdnCallOrigin | read-only | deprecated | The originator of the call. |
| 1.3.6.1.4.1.5.1.1.36.4.1.9 | ColumnaccIsdnCallAddress | read-only | deprecated | The remote call address associated with this call. For incoming calls, this is the calling ISDN address. For outgoing calls, this is the called ISDN address. |
| 1.3.6.1.4.1.5.1.1.36.4.1.10 | ColumnaccIsdnCallDslIndex | read-only | deprecated | The interface index for the digital subscriber loop. |
| 1.3.6.1.4.1.5.1.1.36.5 | NodeaccIsdnTest | |||
| 1.3.6.1.4.1.5.1.1.36.5.1 | ScalaraccIsdnTestIfIndex | read-write | mandatory | The interface index for the physical port from which a call will be made. |
| 1.3.6.1.4.1.5.1.1.36.5.2 | ScalaraccIsdnTestAddress | read-write | mandatory | The ISDN destination call address. |
| 1.3.6.1.4.1.5.1.1.36.5.3 | ScalaraccIsdnTestCommand | read-write | mandatory | The action to be performed. |
| 1.3.6.1.4.1.5.1.1.36.5.4 | ScalaraccIsdnTestRouting | read-only | mandatory | The action to be performed for incoming calls. |
| 1.3.6.1.4.1.5.1.1.36.5.5 | ScalaraccIsdnTestRegName | read-write | mandatory | The name of the MC145474 register to write. |
| 1.3.6.1.4.1.5.1.1.36.5.6 | ScalaraccIsdnTestRegValue | read-write | mandatory | The value to write to the MC145474 register. |
| 1.3.6.1.4.1.5.1.1.36.5.7 | ScalaraccwIsdnTestBChanMode | read-write | mandatory | The action to be performed on the B-channel. |
| 1.3.6.1.4.1.5.1.1.36.5.8 | ScalaraccwIsdnTestOptions | read-write | mandatory | Test options in hex. |
| 1.3.6.1.4.1.5.1.1.36.6 | TableaccIsdnxSubTable | not-accessible | mandatory | ISDN subscriber table containing configuration and operational parameters for all ISDN subscriber interfaces on this bridge/router terminal. |
| 1.3.6.1.4.1.5.1.1.36.6.1 | RowaccIsdnxSubEntry | not-accessible | mandatory | An entry in the ISDN Subscriber Table |
| 1.3.6.1.4.1.5.1.1.36.6.1.1 | ColumnaccIsdnxSubDslIndex | read-only | mandatory | The ifIndex of an ISDN BRI, DBRI, PRI/T1 or PRI/E1 interface on this managed device. |
| 1.3.6.1.4.1.5.1.1.36.6.1.2 | ColumnaccIsdnxSubSwitchType | read-write | mandatory | The particular type of central-office switch providing access to the ISDN network and to which this subscriber interface is connected. |
| 1.3.6.1.4.1.5.1.1.36.6.1.3 | ColumnaccIsdnxSubChanConfig | read-write | mandatory | The ISDN channel configuration mode. Beginning with release 8.0, this is the number of bearer channels managed by the D channel. This object is normally read-o… |
| 1.3.6.1.4.1.5.1.1.36.6.1.4 | ColumnaccIsdnxSubAdminStatus | read-write | mandatory | The administrative status of this subscriber interface. |
| 1.3.6.1.4.1.5.1.1.36.6.1.5 | ColumnaccIsdnxSubDiagLevel | read-write | mandatory | The current diagnostic message level for this subscriber interface. |
| 1.3.6.1.4.1.5.1.1.36.6.1.6 | ColumnaccIsdnxSubManualTei | read-write | mandatory | The TEI (terminal endpoint identifier) when manual TEI assignment is required. Setting this value between 0 and 63 (inclusive) specifies manual TEI assignment … |
| 1.3.6.1.4.1.5.1.1.36.6.1.7 | ColumnaccIsdnxSubOperStatus | read-write | mandatory | The operational status of this subscriber interface. |
| 1.3.6.1.4.1.5.1.1.36.6.1.8 | ColumnaccIsdnxSubNumNfas | read-only | mandatory | Indicates the number of NFAS trunks managed by this D channel. |
| 1.3.6.1.4.1.5.1.1.36.6.1.9 | ColumnaccIsdnxSubLastCause | read-only | mandatory | The last clearing cause for a call associated with this interface. |
| 1.3.6.1.4.1.5.1.1.36.6.1.10 | ColumnaccIsdnxSubSubaddrType | read-write | mandatory | Indicates the subaddress type for the ISDN interface. |
| 1.3.6.1.4.1.5.1.1.36.6.1.11 | ColumnaccIsdnxSubVoiceOption | read-write | mandatory | Indicates whether the user is able to receive circuit mode voice calls |
| 1.3.6.1.4.1.5.1.1.36.6.1.12 | ColumnaccIsdnxSubCliOption | read-write | mandatory | Indicates whether a callers identifaction will be checked with known entries before accepting the call. |
| 1.3.6.1.4.1.5.1.1.36.6.1.13 | ColumnaccIsdnxSubEncodingMethod | read-only | mandatory | Companding algorithm to be used when initiating or answering voice calls over this interface. This is configured during initialization based on the user config… |
| 1.3.6.1.4.1.5.1.1.36.6.1.14 | ColumnaccIsdnxSubDialingMethod | read-only | mandatory | Dialing method to be used when initiating voice calls over the ISDN line. This is configured during initialization based on the user configured switch type. |
| 1.3.6.1.4.1.5.1.1.36.6.1.19 | ColumnaccIsdnxSubAutoSpid | read-write | mandatory | SR-3888 Automatic SPID detection enabled or disabled for a BRI subscriber interface. |
| 1.3.6.1.4.1.5.1.1.36.6.1.20 | ColumnaccIsdnxSubAutoSwitch | read-only | mandatory | The central-office switch type detected by the Automatic Switch detection function. |
| 1.3.6.1.4.1.5.1.1.36.7 | TableaccIsdnxStatTable | not-accessible | mandatory | Statistics and operational status maintained for all ISDN subscriber interfaces on this bridge/router terminal. |
| 1.3.6.1.4.1.5.1.1.36.7.1 | RowaccIsdnxStatEntry | not-accessible | mandatory | An entry in the ISDN Statistics Table. |
| 1.3.6.1.4.1.5.1.1.36.7.1.1 | ColumnaccIsdnxStatDslIndex | read-only | mandatory | The ifIndex of an ISDN BRI, DBRI, PRI/T1 or PRI/E1 interface on this managed device. |
| 1.3.6.1.4.1.5.1.1.36.7.1.2 | ColumnaccIsdnxStatHdlcInPackets | read-only | mandatory | The number of packets received on the D-channel of this ISDN interface. |
| 1.3.6.1.4.1.5.1.1.36.7.1.3 | ColumnaccIsdnxStatHdlcInOctets | read-only | mandatory | The number of octets received on the D-channel of this ISDN interface. |
| 1.3.6.1.4.1.5.1.1.36.7.1.4 | ColumnaccIsdnxStatHdlcInErrors | read-only | mandatory | The number of input hardware errors counted by the D-channel HDLC driver. |
| 1.3.6.1.4.1.5.1.1.36.7.1.5 | ColumnaccIsdnxStatHdlcInDiscards | read-only | mandatory | The number of input packets discarded by the D-channel HDLC driver. |
| 1.3.6.1.4.1.5.1.1.36.7.1.6 | ColumnaccIsdnxStatHdlcOutPackets | read-only | mandatory | The number of packets transmitted on the D-channel of this ISDN interface. |
| 1.3.6.1.4.1.5.1.1.36.7.1.7 | ColumnaccIsdnxStatHdlcOutOctets | read-only | mandatory | The number of octets transmitted on the D-channel of this ISDN interface. |
| 1.3.6.1.4.1.5.1.1.36.7.1.8 | ColumnaccIsdnxStatHdlcOutErrors | read-only | mandatory | The number of output hardware errors counted by the D-channel HDLC driver. |
| 1.3.6.1.4.1.5.1.1.36.7.1.9 | ColumnaccIsdnxStatHdlcOutDiscards | read-only | mandatory | The number of output packets discarded by the D-channel HDLC driver. |
| 1.3.6.1.4.1.5.1.1.36.7.1.10 | ColumnaccIsdnxStatLapdUnsolicResps | read-only | mandatory | The number of unsolicited LAPD response frames received on all data links associated with the D-channel of this ISDN interface. |
| 1.3.6.1.4.1.5.1.1.36.7.1.11 | ColumnaccIsdnxStatLapdPeerSabmes | read-only | mandatory | The number of peer SABME frames received on all data links associated with the D-channel of this ISDN interface. |
| 1.3.6.1.4.1.5.1.1.36.7.1.12 | ColumnaccIsdnxStatLapdN200Errors | read-only | mandatory | The number of unsuccessful T200 timer recoveries after a frame has been retransmitted N200 times. |
| 1.3.6.1.4.1.5.1.1.36.7.1.13 | ColumnaccIsdnxStatLapdNrSeqErrors | read-only | mandatory | The number of N(R) sequence errors. |
| 1.3.6.1.4.1.5.1.1.36.7.1.14 | ColumnaccIsdnxStatLapdRecvdFrmrs | read-only | mandatory | The number of LAPD FRMR response frames received. |
| 1.3.6.1.4.1.5.1.1.36.7.1.15 | ColumnaccIsdnxStatLapdCntlErrors | read-only | mandatory | The number of LAPD frames received with an invalid or non-implemented control field. |
| 1.3.6.1.4.1.5.1.1.36.7.1.16 | ColumnaccIsdnxStatLapdInfoErrors | read-only | mandatory | The number of LAPD frames received with a non-permitted information (I) field. |
| 1.3.6.1.4.1.5.1.1.36.7.1.17 | ColumnaccIsdnxStatLapdWrongSizes | read-only | mandatory | The number of LAPD frames received which were the wrong size. |
| 1.3.6.1.4.1.5.1.1.36.7.1.18 | ColumnaccIsdnxStatLapdN201Errors | read-only | mandatory | The number of LAPD frames received which contained and information field which exceeded N201. |
| 1.3.6.1.4.1.5.1.1.36.7.1.19 | ColumnaccIsdnxStatCallOriginateds | read-only | mandatory | The number of outgoing calls originated on this ISDN interface. |
| 1.3.6.1.4.1.5.1.1.36.7.1.20 | ColumnaccIsdnxStatCallOfferreds | read-only | mandatory | The number of incoming calls offered on this ISDN interface. |
| 1.3.6.1.4.1.5.1.1.36.7.1.21 | ColumnaccIsdnxStatCallRouteds | read-only | mandatory | The number of outgoing calls originated on this ISDN interface which were routed by the network. |
| 1.3.6.1.4.1.5.1.1.36.7.1.22 | ColumnaccIsdnxStatCallAccepteds | read-only | mandatory | The number of incoming calls offered on this ISDN interface which were accepted for connection. |
| 1.3.6.1.4.1.5.1.1.36.7.1.23 | ColumnaccIsdnxStatCallCompleteds | read-only | mandatory | The number of outgoing and incoming calls completed (that is, the number of calls which were successfully connected). |
| 1.3.6.1.4.1.5.1.1.36.7.1.24 | ColumnaccIsdnxStatCallCleareds | read-only | mandatory | The number of outgoing and incoming calls cleared. |
| 1.3.6.1.4.1.5.1.1.36.8 | TableaccIsdnxCallTable | not-accessible | mandatory | Parameters and operational status for ISDN calls in progress on this bridge/router terminal. |
| 1.3.6.1.4.1.5.1.1.36.8.1 | RowaccIsdnxCallEntry | not-accessible | mandatory | An entry in the ISDN Call Table. |
| 1.3.6.1.4.1.5.1.1.36.8.1.1 | ColumnaccIsdnxCallDslIndex | read-only | mandatory | The ifIndex of an ISDN BRI, DBRI, PRI/T1 or PRI/E1 interface on this managed device. |
| 1.3.6.1.4.1.5.1.1.36.8.1.2 | ColumnaccIsdnxCallReference | read-only | mandatory | The Q.931 call reference value for this call. |
| 1.3.6.1.4.1.5.1.1.36.8.1.3 | ColumnaccIsdnxCallOrigin | read-only | mandatory | The originator of the call. |
| 1.3.6.1.4.1.5.1.1.36.8.1.4 | ColumnaccIsdnxCallCircuitIndex | read-only | mandatory | The ifIndex for the circuit associated with this call. |
| 1.3.6.1.4.1.5.1.1.36.8.1.5 | ColumnaccIsdnxCallInfoRate | read-only | mandatory | The information transfer rate. |
| 1.3.6.1.4.1.5.1.1.36.8.1.6 | ColumnaccIsdnxCallState | read-only | mandatory | The Q.931 call control state. |
| 1.3.6.1.4.1.5.1.1.36.8.1.7 | ColumnaccIsdnxCallCause | read-only | mandatory | The last cause value associated with this call. |
| 1.3.6.1.4.1.5.1.1.36.8.1.8 | ColumnaccIsdnxCallAddress | read-only | mandatory | The remote call address associated with this call. For incoming calls, this is the calling ISDN address. For outgoing calls, this is the called ISDN address. |
| 1.3.6.1.4.1.5.1.1.36.8.1.9 | ColumnaccIsdnxCallInfoType | read-only | mandatory | The information transfer type: info-type-cmd circuit mode data, clear channel 64 kbits/s info-type-cm56 circuit mode data, rate-adapted to 56 kbits/s info-type… |
| 1.3.6.1.4.1.5.1.1.36.8.1.10 | ColumnaccIsdnxCallSlotMap | read-only | mandatory | A 31-bit mask which identifies the time-slots forming a hyperchannel. |
| 1.3.6.1.4.1.5.1.1.36.9 | TableaccIsdnSpidTable | not-accessible | mandatory | Valid SPIDs currently Registered with the CO, required for placing/accepting calls. |
| 1.3.6.1.4.1.5.1.1.36.9.1 | RowaccIsdnSpidEntry | not-accessible | mandatory | SPID information entry in the SPID Table. |
| 1.3.6.1.4.1.5.1.1.36.9.1.1 | ColumnaccIsdnSpidIndex | read-only | mandatory | An Index to Ports of B-channels. |
| 1.3.6.1.4.1.5.1.1.36.9.1.2 | ColumnaccIsdnSpidValue | read-write | mandatory | Value of SPID,Required for the terminal to be active on the S/T bus. |
| 1.3.6.1.4.1.5.1.1.36.10 | NodeaccIsdnTerm | |||
| 1.3.6.1.4.1.5.1.1.36.10.1 | ScalaraccIsdnxTermination | read-write | mandatory | ISDN Bus Termination status |
| 1.3.6.1.4.1.5.1.1.36.11 | ScalaraccIsdnxCurrCalls | read-only | mandatory | Number of active ISDN calls |
| 1.3.6.1.4.1.5.1.1.36.12 | NodeaccIsdnTraps | |||
| 1.3.6.1.4.1.5.1.1.36.12.1 | NodeaccIsdnOutGoingCallTrap | While initializing the call control block. When the call was first originated to establish the correct connection endpoint specifier to use, there is a check o… | ||
| 1.3.6.1.4.1.5.1.1.36.12.1 | ScalaraccIsdnTrapMsg | read-only | mandatory | ISDN Trap Message |
| 1.3.6.1.4.1.5.1.1.36.12.2 | NodeaccIsdnCallResetTrap | When a catestrophic event occurs, if there is no recovery because of less cblks, then the call is simply forced to clear, which is cause for this call reset tr… | ||
| 1.3.6.1.4.1.5.1.1.36.12.3 | NodeaccIsdnConnectTrap | Indication thruough this trap is a failure of Connect if the ICCB channel is present. Else deicdes there is no bearer channel and sends this trap. SEVERITY-DEF… | ||
| 1.3.6.1.4.1.5.1.1.36.12.4 | NodeaccIsdnStaleDialCntxtTrap | This trap is triggered when there is a mismatch in the Magicnumber. Treating it as a stale dial. SEVERITY-DEFAULT: Minor EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-… | ||
| 1.3.6.1.4.1.5.1.1.36.12.5 | NodeaccIsdnIncomingCallTrap | This is generated during identifying the calling party, if the call has to be refused based on the validity of the calling number. The reason is also stated in… | ||
| 1.3.6.1.4.1.5.1.1.36.12.6 | NodeaccIsdnCallTrap | This is generated during identifying the called party, if the call has to be refused based on the validity of the called number. The reason is also stated in t… | ||
| 1.3.6.1.4.1.5.1.1.36.12.7 | NodeaccIsdnApplTmrExpTrap | If the application timer expires during the call setup, then the call is aborted. This trap is sent to convey the same. SEVERITY-DEFAULT: Warning EVENTTYPE-DEF… | ||
| 1.3.6.1.4.1.5.1.1.36.12.8 | NodeaccIsdnApplTmrExpInClearTrap | If the application timer expires during the call clearing, then the call is aborted. This trap is sent to convey the same. SEVERITY-DEFAULT: Warning EVENTTYPE-… | ||
| 1.3.6.1.4.1.5.1.1.36.12.9 | NodeaccIsdnChannelRestrtTrap | While determining valid the channel stat, if the action is to restart the channel, then the appropriate B-Channel is restarted. This trap indicates such a situ… | ||
| 1.3.6.1.4.1.5.1.1.36.12.10 | NodeaccIsdnDataLnkRelTrap | If the D-channel Data Link is is to be released making Datalink down, then this trap is triggered. SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 2 ADDITIONAL-TE… | ||
| 1.3.6.1.4.1.5.1.1.36.12.11 | NodeaccIsdnDataLnkEstTrap | If the D-Channel Data Link is established making Datalink UP, then this trap is triggered. SEVERITY-DEFAULT: Clear EVENTTYPE-DEFAULT: 2 ADDITIONAL-TEXT-VARIABL… | ||
| 1.3.6.1.4.1.5.1.1.36.12.12 | NodeaccIsdnConfigStackTrap | If the ISDN stack cannot be configured because of reasons like unspecified switch type, or not supporting DCBU etc., then this trap is generated which is conve… | ||
| 1.3.6.1.4.1.5.1.1.36.12.13 | NodeaccIsdnSubscriberLoopTrap | When a catestorphic error like low cblk conditions occur, then it tries to recover by restting the subscriber's loop. That is when this trap is generated. SEVE… | ||
| 1.3.6.1.4.1.5.1.1.36.12.14 | NodeaccIsdnRegisterTrap | If the registration name is not identified and found in the list, then it sends this trap. SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARI… | ||
| 1.3.6.1.4.1.5.1.1.36.12.15 | NodeaccIsdnTrmnlRegErrTrap | If there is a error in getting the SPID indicates that the it is a unknown CES or may be a inoppurtune event has occured and hence the terminal registration er… | ||
| 1.3.6.1.4.1.5.1.1.36.12.16 | NodeaccIsdnTrmnlRegTrap | In the event SPID state being pending indicates that the the terminal registration failed. This trap indicates the same. SEVERITY-DEFAULT: Major EVENTTYPE-DEFA… | ||
| 1.3.6.1.4.1.5.1.1.36.12.17 | NodeaccIsdnAwaitDatalnkEstTrap | If the SME_TERM_REGISTER request is apparently stuck, most likely because a datalink cannot be established, then this trap is generated. SEVERITY-DEFAULT: Majo… | ||
| 1.3.6.1.4.1.5.1.1.36.12.18 | NodeaccIsdnDisconnectTrap | If the CCB state is proceeding and the ISDN CHANNEL ID is none then this trap can be triggered after which the call is abort. SEVERITY-DEFAULT: Major EVENTTYPE… | ||
| 1.3.6.1.4.1.5.1.1.36.12.19 | NodeaccIsdnOutGoingCallFailTrap | In the process of disconnect request from the RM Manager if there isn't any active call, then this trap is generated. SEVERITY-DEFAULT: Minor EVENTTYPE-DEFAULT… | ||
| 1.3.6.1.4.1.5.1.1.36.12.20 | NodeaccIsdnTrap20 | If the RM Dial manger sends the request to set up and if it fails for various reason, then this trap is generated. SEVERITY-DEFAULT: Minor EVENTTYPE-DEFAULT: 1… | ||
| 1.3.6.1.4.1.5.1.1.36.12.21 | NodeaccIsdnModuleErrTrap | If the application timer expires during the call setup, then the call is aborted. This trap is sent to convey the same. SEVERITY-DEFAULT: Minor EVENTTYPE-DEFAU… | ||
| 1.3.6.1.4.1.5.1.1.36.12.22 | NodeaccIsdnTrap22 | If the application timer expires during the call clrearing, then the call is aborted. This trap is sent to convey the same. SEVERITY-DEFAULT: Minor EVENTTYPE-D… | ||
| 1.3.6.1.4.1.5.1.1.36.12.23 | NodeaccIsdnNfasIntfTrap | If there is a application-dependent error then this trap displays the module function and the error message. SEVERITY-DEFAULT: Minor EVENTTYPE-DEFAULT: 10 ADDI… | ||
| 1.3.6.1.4.1.5.1.1.36.12.24 | NodeaccIsdnNoSpidTrap | While initialsing the layer1 task, if the interface is configured for NT mode, then this trap is generated. SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADD… | ||
| 1.3.6.1.4.1.5.1.1.36.12.25 | NodeaccIsdnSpidConflictTrap | If the trial to get the internal interface id fails it means the NFAS interface is not properly defined. SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADDITI… | ||
| 1.3.6.1.4.1.5.1.1.36.12.26 | NodeaccIsdnInvSpidTrap | While getting the SPID tries to find the port. In the process if the port is not found and a corresponding PP index is not found then this trap is generated. S… | ||
| 1.3.6.1.4.1.5.1.1.36.12.27 | NodeaccIsdnSwBldTrap | While getting the SPID, it comapres the interface flag and if there is a match, it triggers a config error, and hence the trap saying conflicting SPIDs. SEVERI… | ||
| 1.3.6.1.4.1.5.1.1.36.12.28 | NodeaccIsdnParametersTrap | If the SPID is too lengthy which is not supported then this trap is generated. SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { acc… | ||
| 1.3.6.1.4.1.5.1.1.36.12.29 | NodeaccIsdnSwitchTypeTrap | Determines whether or not operating as the network side (NT) or user side (TE) and records this in the DSL entry. And generates a trap if the hardware configur… | ||
| 1.3.6.1.4.1.5.1.1.36.12.30 | NodeaccIsdnManyIntfTrap | While initialzing the ISDN parameters, it validates from the NVM. While doing so if a error is encountered this config error trap is sent. SEVERITY-DEFAULT: Wa… | ||
| 1.3.6.1.4.1.5.1.1.36.12.31 | NodeaccIsdnPriGroupRangeTrap | Tries to make sure the switch type configured for the subscriber entry has been included in the system build. If not, generates this trap and proceeds as if th… | ||
| 1.3.6.1.4.1.5.1.1.36.12.32 | NodeaccIsdnNfasIntfPriTrap | The maximum number of DSL entries is limited at compile time by the Telenetworks code. When it exceeds this this trap is generated. SEVERITY-DEFAULT: Warning E… | ||
| 1.3.6.1.4.1.5.1.1.36.12.33 | NodeaccIsdnManyNFASIntfTrap | If during initialization a invalid group is encountered as it is out of the range, then this trap is generated. SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10… | ||
| 1.3.6.1.4.1.5.1.1.36.12.34 | NodeaccIsdnPriGroupTrap | Looks for interfaces in PRI group 0. If the interface has a signaling channel, it is assumed to be a stand-alone interface. Otherwise, it is a orphan (i.e., mi… | ||
| 1.3.6.1.4.1.5.1.1.36.12.35 | NodeaccIsdnTrap35 | In the event of making sure the PRI group has a primary signaling interface and that the group can accommodate an additional NFAS interface, if the new pri id … | ||
| 1.3.6.1.4.1.5.1.1.36.12.36 | NodeaccIsdnNoSrvcProIFTrap | No service profile identifier SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accIsdnTrapMsg } PCAUSE-DEFAULT: 7 | ||
| 1.3.6.1.4.1.5.1.1.36.12.37 | NodeaccIsdnNTBldIncmptblHWTrap | Software NT build is incompatible with harware TE mode SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accIsdnTra… | ||
| 1.3.6.1.4.1.5.1.1.36.12.38 | NodeaccIsdnRcvdSpidTrap | Received one spid SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accIsdnTrapMsg } PCAUSE-DEFAULT: 7 | ||
| 1.3.6.1.4.1.5.1.1.36.12.39 | NodeaccIsdnRcvdSpidsNWTrap | Received spids from network SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accIsdnTrapMsg } PCAUSE-DEFAULT: 7 | ||
| 1.3.6.1.4.1.5.1.1.36.12.40 | NodeaccIsdnAutoSpidFldTrap | Auto spid failed (found %d suitable SPID(s)) SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accIsdnTrapMsg } PCA… | ||
| 1.3.6.1.4.1.5.1.1.36.12.41 | NodeaccIsdnAutoSpidSccdTrap | Auto spid succeeded SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accIsdnTrapMsg } PCAUSE-DEFAULT: 7 | ||
| 1.3.6.1.4.1.5.1.1.36.12.42 | NodeaccIsdnAutoSpidFld1Trap | Auto spid failed (cause = %d) SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accIsdnTrapMsg } PCAUSE-DEFAULT: 7 | ||
| 1.3.6.1.4.1.5.1.1.36.12.43 | NodeaccIsdnAutoSwtchSccdTrap | Auto switch detection succeeded SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accIsdnTrapMsg } PCAUSE-DEFAULT: 7 | ||
| 1.3.6.1.4.1.5.1.1.36.12.44 | NodeaccIsdnAutoSwtchFldTrap | Auto switch detection failed (unspecified switch type) SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accIsdnTra… | ||
| 1.3.6.1.4.1.5.1.1.36.12.45 | NodeaccIsdnAutoSwtchFld1Trap | Auto switch detection failed SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accIsdnTrapMsg } PCAUSE-DEFAULT: 7 |