ACC-LAPB
24 objects
No module-level DESCRIPTION found.
Imported Objects
| ACC-MIB | accBRG DisplayString IfIndex RowStatus SmdsAddress |
| ACC-SYSTEM | accTrapLogSeqNum |
| RFC1155-SMI | Counter Gauge IpAddress OBJECT-TYPE TimeTicks |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5.1.1.7 | NodeaccLapb | |||
| 1.3.6.1.4.1.5.1.1.7.1 | ScalaraccLapbNum | read-only | mandatory | Number of HDLC ports |
| 1.3.6.1.4.1.5.1.1.7.2 | TableaccLapbParmTable | not-accessible | mandatory | HDLC LAPB port parameters |
| 1.3.6.1.4.1.5.1.1.7.2.1 | RowaccLapbParmEntry | not-accessible | mandatory | LAPB parameters for a port. |
| 1.3.6.1.4.1.5.1.1.7.2.1.1 | ColumnaccLapbIndex | read-only | mandatory | Physical port number of this interface. |
| 1.3.6.1.4.1.5.1.1.7.2.1.2 | ColumnaccLapbType | read-write | mandatory | LAPB station type for this interface. |
| 1.3.6.1.4.1.5.1.1.7.2.1.3 | ColumnaccLapbT1Timer | read-write | mandatory | T1 timer value (in milliseconds) for this interface. |
| 1.3.6.1.4.1.5.1.1.7.2.1.4 | ColumnaccLapbN2Count | read-write | mandatory | N2 counter (retry counter) for this interface. |
| 1.3.6.1.4.1.5.1.1.7.2.1.5 | ColumnaccLapbFrameWindow | read-write | mandatory | LAPB frame window. If a value greater than 7 is specified, modulo-128 sequencing is used instead of modulo-8 sequencing. |
| 1.3.6.1.4.1.5.1.1.7.2.1.6 | ColumnaccLapbFlags | read-write | mandatory | Number of flags to insert between frames on transmission. |
| 1.3.6.1.4.1.5.1.1.7.2.1.7 | ColumnaccHdlcRrPolling | read-write | mandatory | T3 Timer. |
| 1.3.6.1.4.1.5.1.1.7.2.1.8 | ColumnaccHdlcFCS | read-write | mandatory | FCS Mode. |
| 1.3.6.1.4.1.5.1.1.7.2.1.9 | ColumnaccHdlcCoding | read-write | mandatory | HDLC Coding type. |
| 1.3.6.1.4.1.5.1.1.7.2.1.10 | ColumnaccHdlcDuplex | read-write | mandatory | HDLC Duplex mode. |
| 1.3.6.1.4.1.5.1.1.7.2.1.11 | ColumnaccHdlcIdleFill | read-write | mandatory | Fill between frames with flags or ones |
| 1.3.6.1.4.1.5.1.1.7.3 | TableaccLapbStatTable | not-accessible | mandatory | A list of statistics for serial ports configured for LABP protocol. |
| 1.3.6.1.4.1.5.1.1.7.3.1 | RowaccLapbStatEntry | not-accessible | mandatory | LAPB statistics for a specific port. |
| 1.3.6.1.4.1.5.1.1.7.3.1.1 | ColumnaccLapbStatIndex | read-only | mandatory | Port number for this LAPB serial port |
| 1.3.6.1.4.1.5.1.1.7.3.1.2 | ColumnaccLapbStatBadFCSIns | read-only | mandatory | Number of LAPB frames received with bad frame checksum (FCS). |
| 1.3.6.1.4.1.5.1.1.7.3.1.3 | ColumnaccLapbStatFRMRIns | read-only | mandatory | Number of LAPB frames received with framing errors |
| 1.3.6.1.4.1.5.1.1.7.3.1.4 | ColumnaccLapbStatT1Timeouts | read-only | mandatory | Number of T1 timeouts detected on this port |
| 1.3.6.1.4.1.5.1.1.7.3.1.5 | ColumnaccLapbStatREJIns | read-only | mandatory | number of REJECT LAPB frames received |
| 1.3.6.1.4.1.5.1.1.7.3.1.6 | ColumnaccLapbStatREJOuts | read-only | mandatory | Number of LAPB REJECT frames transmitted |
| 1.3.6.1.4.1.5.1.1.7.3.1.7 | ColumnaccLapbStatShortIns | read-only | mandatory | Number of short LAPB frames received |