ACC-MSP
47 objects
No module-level DESCRIPTION found.
Imported Objects
| ACC-MIB | accBRG DisplayString IfIndex RowStatus SmdsAddress |
| ACC-SYSTEM | accTrapLogSeqNum |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter Gauge IpAddress OBJECT-TYPE TimeTicks |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5.1.1.76 | NodeaccMsp | |||
| 1.3.6.1.4.1.5.1.1.76.1 | NodeaccMspGeneralScalars | |||
| 1.3.6.1.4.1.5.1.1.76.1.1 | ScalaraccMspAdminState | read-write | mandatory | MSP Adminstrative state. |
| 1.3.6.1.4.1.5.1.1.76.1.2 | ScalaraccMspMode | read-write | mandatory | MSP Mode : WAIT means that MSP requires its neighbors to respond only if they want the call. ACKNOWLEDGE causes all the MSP neighbors to respond to every reque… |
| 1.3.6.1.4.1.5.1.1.76.1.3 | ScalaraccMspDelivery | read-write | mandatory | Sets the delivery mechanism for MSP packets. |
| 1.3.6.1.4.1.5.1.1.76.1.4 | ScalaraccMspGroupId | read-write | mandatory | MSP Group Identifier, should be the same value on all MSP NASs. |
| 1.3.6.1.4.1.5.1.1.76.1.5 | ScalaraccMspInterfaceAddress | read-write | mandatory | The interface address in which the MSP protocol is to operate over |
| 1.3.6.1.4.1.5.1.1.76.1.6 | ScalaraccMspUdpPort | read-write | mandatory | Changes the default UDP port number that MSP uses when sending and listening for MSP packets. |
| 1.3.6.1.4.1.5.1.1.76.1.7 | ScalaraccMspMaximumTimeout | read-write | mandatory | Maximum amount of time MSP will wait for an MSP neighbor to respond to a request. |
| 1.3.6.1.4.1.5.1.1.76.1.8 | ScalaraccMspMaximumRetransmissions | read-write | mandatory | Used to configure the maximum number of retransmissions that MSP will send to an MSP neighbor before designating the neighbors as 'non-responding'. |
| 1.3.6.1.4.1.5.1.1.76.1.9 | ScalaraccMspMaximumHistorySize | read-write | mandatory | Used to configure the maximum history buffer size. Must be in powers of 2. |
| 1.3.6.1.4.1.5.1.1.76.1.10 | ScalaraccMspMessageLevel | read-write | mandatory | Used to set the message level for MSP. 7 being most robust. |
| 1.3.6.1.4.1.5.1.1.76.1.11 | ScalaraccMspDebugMask | read-write | mandatory | Used to selectively enable and disable MSP trap messages used for debugging. The debug messages are different from regular traps. |
| 1.3.6.1.4.1.5.1.1.76.1.12 | ScalaraccMspStatInPackets | read-only | mandatory | Indicates the total number of MSP packets received from all MSP neighbors, both unicast and multicast packets. |
| 1.3.6.1.4.1.5.1.1.76.1.13 | ScalaraccMspStatOutPackets | read-only | mandatory | Indicates the total number of MSP packets sent, including both unicast and multicast packets. |
| 1.3.6.1.4.1.5.1.1.76.1.14 | ScalaraccMspStatInQueries | read-only | mandatory | Indicates the number of MSP Query Requests that have been received from MSP neighbors. |
| 1.3.6.1.4.1.5.1.1.76.1.15 | ScalaraccMspStatOutQueries | read-only | mandatory | Indicates the number of MSP Query requests that have been sent by this RAC. A MSP Query request is sent for each new Multilink call that the RAC receives. |
| 1.3.6.1.4.1.5.1.1.76.1.16 | ScalaraccMspStatInAcks | read-only | mandatory | Indicates the number of MSP acknowledge packets received by this RAC |
| 1.3.6.1.4.1.5.1.1.76.1.17 | ScalaraccMspStatOutAcks | read-only | mandatory | Indicates the number of MSP acknowledges sent by this RAC. |
| 1.3.6.1.4.1.5.1.1.76.1.18 | ScalaraccMspStatInRequests | read-only | mandatory | Indicates the number of times a MSP neighbor has requested a remote client session from this RAC. |
| 1.3.6.1.4.1.5.1.1.76.1.19 | ScalaraccMspStatOutRequests | read-only | mandatory | Indicates the number of times This RAC has requested a remote client session from a MSP neighbor. |
| 1.3.6.1.4.1.5.1.1.76.1.20 | ScalaraccMspStatInDiscards | read-only | mandatory | Indicates the number of times the local MSP protocol has discarded MSP packets.This counter increases if MSP receives a MSP packet that is not a member of its … |
| 1.3.6.1.4.1.5.1.1.76.1.21 | ScalaraccMspStatProcessingErrors | read-only | mandatory | Indicates the number of times the MSP protocol has failed to process a MSP packet. Failures arise from conditions where the packet could not be correctly proce… |
| 1.3.6.1.4.1.5.1.1.76.1.22 | ScalaraccMspStatNotForMes | read-only | mandatory | Indicates number of times an MSP acknowledgment to a query not generated by this RAC has been received by this MSP protocol entity. This is normal for piggybac… |
| 1.3.6.1.4.1.5.1.1.76.1.23 | ScalaraccMspStatProtocolErrors | read-only | mandatory | Indicates the number of times this MSP protocol entity has encountered MSP protocol errors in processing a MSP packet. |
| 1.3.6.1.4.1.5.1.1.76.1.24 | ScalaraccMspStatInQueryPiggys | read-only | mandatory | Along with Out Query Piggy, In Ack Piggy, and Out Ack Piggy indicates how well MSP is operating. As MSP activity increases, the MSP protocol is designed to pig… |
| 1.3.6.1.4.1.5.1.1.76.1.25 | ScalaraccMspStatOutQueryPiggys | read-only | mandatory | Along with Out Query Piggy, In Ack Piggy, and Out Ack Piggy indicates how well MSP is operating. As MSP activity increases, the MSP protocol is designed to pig… |
| 1.3.6.1.4.1.5.1.1.76.1.26 | ScalaraccMspStatInAckPiggys | read-only | mandatory | Along with Out Query Piggy, In Ack Piggy, and Out Ack Piggy indicates how well MSP is operating. As MSP activity increases, the MSP protocol is designed to pig… |
| 1.3.6.1.4.1.5.1.1.76.1.27 | ScalaraccMspStatOutAckPiggys | read-only | mandatory | Along with Out Query Piggy, In Ack Piggy, and Out Ack Piggy indicates how well MSP is operating. As MSP activity increases, the MSP protocol is designed to pig… |
| 1.3.6.1.4.1.5.1.1.76.1.28 | ScalaraccMspStatQueryTimeouts | read-only | mandatory | Indicates the number of times the local MSP protocol entity has timed out while waiting for a query response. This is normal in TIMEOUT mode of operation. Howe… |
| 1.3.6.1.4.1.5.1.1.76.1.29 | ScalaraccMspStatMemoryFails | read-only | mandatory | Indicates the number of times this MSP protocol entity has failed to acquire memory when performing its protocol operations. |
| 1.3.6.1.4.1.5.1.1.76.1.30 | ScalaraccMspStatAverageQueryClosure | read-only | mandatory | Indicates the average time to close a MSP Query Request. When in TIMEOUT mode, this value coincides with the configured maximum timeout parameter value. The de… |
| 1.3.6.1.4.1.5.1.1.76.1.31 | ScalaraccMspStatCurrentTimeout | read-only | mandatory | indicates the current timeout value being used. In TIMEOUT mode, this will always be the maximum timeout value. In ACKNOWLEDGE mode, this value varies, but in … |
| 1.3.6.1.4.1.5.1.1.76.2 | NodeaccMspNeighbor | |||
| 1.3.6.1.4.1.5.1.1.76.2.1 | TableaccMspNeighborTable | not-accessible | mandatory | Displays all active MSP Neighbors. |
| 1.3.6.1.4.1.5.1.1.76.2.1.1 | RowaccMspNeighborEntry | not-accessible | mandatory | |
| 1.3.6.1.4.1.5.1.1.76.2.1.1.1 | ColumnaccMspNeighborAddress | read-only | mandatory | The remote IP Address of the MSP Neighbor. |
| 1.3.6.1.4.1.5.1.1.76.2.1.1.2 | ColumnaccMspNeighborIDs | read-only | mandatory | Number of times the MSP Neighbor failed to respond to an MSP request |
| 1.3.6.1.4.1.5.1.1.76.2.1.1.3 | ColumnaccMspNeighborVersions | read-only | mandatory | |
| 1.3.6.1.4.1.5.1.1.76.2.1.1.4 | ColumnaccMspNeighborStates | read-only | mandatory | |
| 1.3.6.1.4.1.5.1.1.76.2.1.1.5 | ColumnaccMspNeighborAckTimeOuts | read-only | mandatory | |
| 1.3.6.1.4.1.5.1.1.76.2.1.1.6 | ColumnaccMspNeighborRetransmissions | read-only | mandatory | |
| 1.3.6.1.4.1.5.1.1.76.3 | NodeaccMspTraps | |||
| 1.3.6.1.4.1.5.1.1.76.3.1 | NodeaccMspIpBindTrap | When the MSP multi cast binding to a IP is attempted, if this fails then this trap is generated. SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEX… | ||
| 1.3.6.1.4.1.5.1.1.76.3.1 | ScalaraccMspTrapMsg | read-only | mandatory | Enterprise Trap Message for Msp |
| 1.3.6.1.4.1.5.1.1.76.3.2 | NodeaccMspInvIntfAddrTrap | if The MSP interface address is not 0.0.0.0 then only it is a valid interface address. So, if this check fails this trap is generated SEVERITY-DEFAULT: Warning… | ||
| 1.3.6.1.4.1.5.1.1.76.3.3 | NodeaccMspShutdownTrap | While creating a MSP neighbor, if the allocation to that fails due to allocc failure, then this is REAL bad situation as this could break the hello protocol. M… |