ACC-RADIUS
82 objects
No module-level DESCRIPTION found.
Imported Objects
| ACC-MIB | accBRG DisplayString IfIndex RowStatus SmdsAddress |
| ACC-SYSTEM | accTrapLogSeqNum |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter Gauge IpAddress OBJECT-TYPE TimeTicks |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5.1.1.44 | NodeaccRadius | |||
| 1.3.6.1.4.1.5.1.1.44.1 | ScalaraccRadiusNASIdentifier | read-write | mandatory | The string used to identify the NAS to a Radius server |
| 1.3.6.1.4.1.5.1.1.44.2 | ScalaraccRadiusInvAttribAction | read-write | mandatory | Invalid Attribute Action |
| 1.3.6.1.4.1.5.1.1.44.3 | ScalaraccRadiusMaxPort | read-write | mandatory | The maximum number of simultaneous calls that can be authenticated using the Radius protocol |
| 1.3.6.1.4.1.5.1.1.44.4 | ScalaraccRadiusPortRangeStart | read-only | mandatory | The ifIndex for the start of the Radius port range. |
| 1.3.6.1.4.1.5.1.1.44.5 | ScalaraccRadiusPortRangeEnd | read-only | mandatory | The ifIndex for the end of the Radius port range. |
| 1.3.6.1.4.1.5.1.1.44.6 | NodeaccRadiusAuth | |||
| 1.3.6.1.4.1.5.1.1.44.6.1 | TableaccRadiusAuthServTable | not-accessible | mandatory | Table of Radius authentication Server Information |
| 1.3.6.1.4.1.5.1.1.44.6.1.1 | RowaccRadiusAuthServEntry | not-accessible | mandatory | A single Radius authentication server configuration and status |
| 1.3.6.1.4.1.5.1.1.44.6.1.1.1 | ColumnaccRadiusAuthServIndex | read-write | mandatory | The index of this entry in the server table |
| 1.3.6.1.4.1.5.1.1.44.6.1.1.2 | ColumnaccRadiusAuthServAdState | read-write | mandatory | The administrative state of the server entry. Enables (and creates if not present), disables or deletes a server entry |
| 1.3.6.1.4.1.5.1.1.44.6.1.1.3 | ColumnaccRadiusAuthServAddr | read-write | mandatory | The IP address of the authentication server |
| 1.3.6.1.4.1.5.1.1.44.6.1.1.4 | ColumnaccRadiusAuthServPassword | read-write | mandatory | The secret shared between the NAS and the authentication server |
| 1.3.6.1.4.1.5.1.1.44.6.1.1.5 | ColumnaccRadiusAuthServRetryInt | read-write | mandatory | The time in seconds to wait for a reply for an access-request from sent to the authentication server |
| 1.3.6.1.4.1.5.1.1.44.6.1.1.6 | ColumnaccRadiusAuthServRetryCnts | read-write | mandatory | The number of times to attempt to send an access-request to a server |
| 1.3.6.1.4.1.5.1.1.44.6.1.1.7 | ColumnaccRadiusAuthServUDPPort | read-write | mandatory | The destination UDP port number on the server to send an access-request to |
| 1.3.6.1.4.1.5.1.1.44.6.1.1.8 | ColumnaccRadiusAuthServOpState | read-only | mandatory | The operational state of a server entry. UP for a server that has responded to the last request sent to it. DOWN for a server that did not respond to the last … |
| 1.3.6.1.4.1.5.1.1.44.6.1.1.9 | ColumnaccRadiusAuthServReqCnts | read-only | mandatory | The number of access-requests that have been sent to a server |
| 1.3.6.1.4.1.5.1.1.44.6.1.1.10 | ColumnaccRadiusAuthServAccCnts | read-only | mandatory | The number of access accepts that have been received from a server |
| 1.3.6.1.4.1.5.1.1.44.6.1.1.11 | ColumnaccRadiusAuthServRejCnts | read-only | mandatory | The number of access rejects that have ben received from a server |
| 1.3.6.1.4.1.5.1.1.44.6.1.1.12 | ColumnaccRadiusAuthServAccessPart | read-write | obsolete | The access partition associated with this authentication server. If an access partition name has been configured, this authentication server will only by used … |
| 1.3.6.1.4.1.5.1.1.44.6.1.1.13 | ColumnaccRadiusAuthServSecure | read-write | mandatory | Certain attributes are considered secure as the values set may comprimise access partitions. A server must have this object set to secure to support sending th… |
| 1.3.6.1.4.1.5.1.1.44.6.2 | ScalaraccRadiusAuthMsgLvl | read-write | mandatory | The diagnostic message level for Radius authentication. |
| 1.3.6.1.4.1.5.1.1.44.6.3 | ScalaraccRadiusAuthRecoverTO | read-write | mandatory | The time a server entry will remain in the DOWN state before transitioning to UNKNOWN |
| 1.3.6.1.4.1.5.1.1.44.6.4 | ScalaraccRadiusAuthReqDiscs | read-write | mandatory | the number of authentication server requests discarded |
| 1.3.6.1.4.1.5.1.1.44.6.5 | ScalaraccRadiusAuthRespDiscs | read-write | mandatory | the number of authentication server responses discarded |
| 1.3.6.1.4.1.5.1.1.44.6.6 | ScalaraccRadiusAuthLastUser | read-only | mandatory | The user name of the last caller we performed Radius authentication for |
| 1.3.6.1.4.1.5.1.1.44.6.7 | ScalaraccRadiusAuthLastType | read-write | mandatory | The type of the last Radius authentication frame received/transmitted |
| 1.3.6.1.4.1.5.1.1.44.6.8 | ScalaraccRadiusAuthCallsRejs | read-write | mandatory | The number of calls rejected due to no replies being received from configured servers |
| 1.3.6.1.4.1.5.1.1.44.6.9 | ScalaraccRadiusAuthConfigErrs | read-write | mandatory | the number of dynamic configuration errors |
| 1.3.6.1.4.1.5.1.1.44.6.10 | TableaccRadiusAuthDebugTable | not-accessible | mandatory | Table of Radius User Debug Sessions |
| 1.3.6.1.4.1.5.1.1.44.6.10.1 | RowaccRadiusAuthDebugEntry | not-accessible | mandatory | A single Radius authentication user debug session |
| 1.3.6.1.4.1.5.1.1.44.6.10.1.1 | ColumnaccRadiusAuthDebugName | read-write | mandatory | The name of the user to run a debug session for |
| 1.3.6.1.4.1.5.1.1.44.6.10.1.2 | ColumnaccRadiusAuthDebugMask | read-write | mandatory | The debug mask to use for the users debug session |
| 1.3.6.1.4.1.5.1.1.44.7 | NodeaccRadiusAcct | |||
| 1.3.6.1.4.1.5.1.1.44.7.1 | TableaccRadiusAcctServTable | not-accessible | mandatory | Table of Radius accounting Server Information |
| 1.3.6.1.4.1.5.1.1.44.7.1.1 | RowaccRadiusAcctServEntry | not-accessible | mandatory | A single Radius accounting server configuration and status |
| 1.3.6.1.4.1.5.1.1.44.7.1.1.1 | ColumnaccRadiusAcctServIndex | read-write | mandatory | The index of this entry in the server table |
| 1.3.6.1.4.1.5.1.1.44.7.1.1.2 | ColumnaccRadiusAcctServAdState | read-write | mandatory | The administrative state of the server entry. Enables (and creates if not present), disables or deletes a server entry |
| 1.3.6.1.4.1.5.1.1.44.7.1.1.3 | ColumnaccRadiusAcctServAddr | read-write | mandatory | The IP address of the accounting server |
| 1.3.6.1.4.1.5.1.1.44.7.1.1.4 | ColumnaccRadiusAcctServPassword | read-write | mandatory | The secret shared between the NAS and the accounting server |
| 1.3.6.1.4.1.5.1.1.44.7.1.1.5 | ColumnaccRadiusAcctServRetryInt | read-write | mandatory | The time in seconds to wait for a reply for an accounting-request from sent to the accounting server |
| 1.3.6.1.4.1.5.1.1.44.7.1.1.6 | ColumnaccRadiusAcctServRetryCnts | read-write | mandatory | The number of times to attempt to send an accounting-request to a server |
| 1.3.6.1.4.1.5.1.1.44.7.1.1.7 | ColumnaccRadiusAcctServUDPPort | read-write | mandatory | The destination UDP port number on the server to send an accounting-request to |
| 1.3.6.1.4.1.5.1.1.44.7.1.1.8 | ColumnaccRadiusAcctServOpState | read-only | mandatory | The operational state of a server entry. UP for a server that has responded to the last request sent to it. DOWN for a server that did not respond to the last … |
| 1.3.6.1.4.1.5.1.1.44.7.1.1.9 | ColumnaccRadiusAcctServReqCnts | read-only | mandatory | The number of accounting-requests that have been sent to a server |
| 1.3.6.1.4.1.5.1.1.44.7.1.1.10 | ColumnaccRadiusAcctServAccCnts | read-only | mandatory | The number of accounting responses that have been received from a server |
| 1.3.6.1.4.1.5.1.1.44.7.1.1.11 | ColumnaccRadiusAcctServAccessPart | read-write | obsolete | The access partition associated with this authentication server. If an access partition name has been configured, this authentication server will only by used … |
| 1.3.6.1.4.1.5.1.1.44.7.1.1.13 | ColumnaccRadiusAcctServIBCAttrSupp | read-write | mandatory | Validity of the Internet Billing support feature. |
| 1.3.6.1.4.1.5.1.1.44.7.2 | ScalaraccRadiusAcctMsgLvl | read-write | mandatory | The diagnostic message level for Radius accounting. |
| 1.3.6.1.4.1.5.1.1.44.7.3 | ScalaraccRadiusAcctRecoverTO | read-write | mandatory | The time a server entry will remain in the DOWN state before transitioning to UNKNOWN |
| 1.3.6.1.4.1.5.1.1.44.7.4 | ScalaraccRadiusAcctReqDiscs | read-only | mandatory | The number of accounting requests discarded due to no responses being received from configured servers |
| 1.3.6.1.4.1.5.1.1.44.7.5 | ScalaraccRadiusAcctRespDiscs | read-only | mandatory | The number of accounting responses discarded. |
| 1.3.6.1.4.1.5.1.1.44.7.6 | ScalaraccRadiusAcctLastUser | read-only | mandatory | The user name of the last caller we performed Radius accounting for |
| 1.3.6.1.4.1.5.1.1.44.7.7 | ScalaraccRadiusAcctLastType | read-only | mandatory | The type of the last Radius accounting frame received/transmitted |
| 1.3.6.1.4.1.5.1.1.44.8 | ScalaraccRadiusDebugMask | read-write | mandatory | Mask for turning on debugging messages |
| 1.3.6.1.4.1.5.1.1.44.9 | ScalaraccRadiusGroupRangeStart | read-write | mandatory | Group range start |
| 1.3.6.1.4.1.5.1.1.44.10 | ScalaraccRadiusGroupRangeEnd | read-write | mandatory | Group range end |
| 1.3.6.1.4.1.5.1.1.44.11 | ScalaraccRadiusNASIpAddress | read-write | mandatory | The IP address used to identify the NAS to a Radius server |
| 1.3.6.1.4.1.5.1.1.44.12 | NodeaccRadiusTraps | |||
| 1.3.6.1.4.1.5.1.1.44.12.1 | NodeaccRadiusServerDnTrap | When the operation state of the server goes down this trap is generated. SEVERITY-DEFAULT: Major EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogS… | ||
| 1.3.6.1.4.1.5.1.1.44.12.1 | ScalaraccRadiusTrapMsg | read-only | mandatory | RADIUS trap message. |
| 1.3.6.1.4.1.5.1.1.44.12.2 | NodeaccRadiusUsrNameTrap | If the user name length too high which is not supported by the RADIUS server then this trap is generated. SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADDIT… | ||
| 1.3.6.1.4.1.5.1.1.44.12.3 | NodeaccRadiusInOpportuneEvntTrap | Indicates that the event is not found in the list of events supported. SEVERITY-DEFAULT: Minor EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeq… | ||
| 1.3.6.1.4.1.5.1.1.44.12.4 | NodeaccRadiusEvntCfgAddNakTrap | Configuration of entity <param1> failed (<param2>) SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accRadiusTrapM… | ||
| 1.3.6.1.4.1.5.1.1.44.12.5 | NodeaccRadiusEvntMutexAttribTrap | Indicates that both the framed attributes and tunnel attributes are present. It means RADIUS need to configure both framed PPP session and tunnel session which… | ||
| 1.3.6.1.4.1.5.1.1.44.12.6 | NodeaccRadiusEvntReqTrap | This trap indicates that there is a mismatch between the PPP attributes and one in requested type. SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADDITIONAL-T… | ||
| 1.3.6.1.4.1.5.1.1.44.12.7 | NodeaccRadiusEvntSPTrap | This trap indicates that there is a incompatibility between the Framed PPP service and the service profile. SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADD… | ||
| 1.3.6.1.4.1.5.1.1.44.12.8 | NodeaccRadiusEvntCfgTrap | Proxy mode tunneling not enabled SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accRadiusTrapMsg } PCAUSE-DEFAUL… | ||
| 1.3.6.1.4.1.5.1.1.44.12.9 | NodeaccRadiusEvntAttribTrap | Indicates that the kind of session is not valid. SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accRadiusTrapMsg… | ||
| 1.3.6.1.4.1.5.1.1.44.12.10 | NodeaccRadiusRedundantReqTrap | Indicates that the request is duplicate open-request; and the session is already open. SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLE… | ||
| 1.3.6.1.4.1.5.1.1.44.12.11 | NodeaccRadiusBindApTrap | Indicates that cant bind to access partition which has been configured from the service profile of the user. The service type is no longer checked and any serv… | ||
| 1.3.6.1.4.1.5.1.1.44.12.12 | NodeaccRadiusAllocUsrSessionBlkTrap | cannot allocate user session block due to memory shortage. SEVERITY-DEFAULT: Major EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accRadiu… | ||
| 1.3.6.1.4.1.5.1.1.44.12.13 | NodeaccRadiusPktUnknwnServTrap | Packet from unknown server - Addr %s, Port %d SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 2 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accRadiusTrapMsg } P… | ||
| 1.3.6.1.4.1.5.1.1.44.12.14 | NodeaccRadiusUDPBindFaildTrap | UDP bind failed on port %u SEVERITY-DEFAULT: Minor EVENTTYPE-DEFAULT: 2 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accRadiusTrapMsg } PCAUSE-DEFAULT: 46 | ||
| 1.3.6.1.4.1.5.1.1.44.12.15 | NodeaccRadiusAccPartnBindTrap | Can't bind to access partition SEVERITY-DEFAULT: Minor EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accRadiusTrapMsg } PCAUSE-DEFAULT: 46 | ||
| 1.3.6.1.4.1.5.1.1.44.12.16 | NodeaccRadiusInvldLenAttrTrap | Invalid length in access-accept attribute SEVERITY-DEFAULT: Minor EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accRadiusTrapMsg } PCAUSE… | ||
| 1.3.6.1.4.1.5.1.1.44.12.17 | NodeaccRadiusInvldLenHdrTrap | Invalid length in access-accept header SEVERITY-DEFAULT: Minor EVENTTYPE-DEFAULT: 10 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accRadiusTrapMsg } PCAUSE-DE… | ||
| 1.3.6.1.4.1.5.1.1.44.12.18 | NodeaccRadiusInvldAccChallPaktTrap | Invalid access-challenge packet received SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 2 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accRadiusTrapMsg } PCAUSE… | ||
| 1.3.6.1.4.1.5.1.1.44.12.19 | NodeaccRadiusNoChalMsgTrap | No challenge message in access-challenge packet SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 2 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accRadiusTrapMsg }… | ||
| 1.3.6.1.4.1.5.1.1.44.12.20 | NodeaccRadiusInvldAuthActResTrap | Invalid authenticator in account-response SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 2 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accRadiusTrapMsg } PCAUS… | ||
| 1.3.6.1.4.1.5.1.1.44.12.21 | NodeaccRadiusInvldAuthAccResTrap | Invalid authenticator in access-response SEVERITY-DEFAULT: Warning EVENTTYPE-DEFAULT: 2 ADDITIONAL-TEXT-VARIABLES: { accTrapLogSeqNum,accRadiusTrapMsg } PCAUSE… |