ACC-SERVICEPROFILE
36 objects
No module-level DESCRIPTION found.
Imported Objects
| ACC-MIB | accBRG DisplayString IfIndex RowStatus SmdsAddress |
| ACC-SYSTEM | accTrapLogSeqNum |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter Gauge IpAddress OBJECT-TYPE TimeTicks |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5.1.1.65 | NodeaccServiceProfile | |||
| 1.3.6.1.4.1.5.1.1.65.1 | TableaccServiceProfileTable | not-accessible | mandatory | The Service Profile Table |
| 1.3.6.1.4.1.5.1.1.65.1.1 | RowaccServiceProfileEntry | not-accessible | mandatory | An entry in the Service Profile Table |
| 1.3.6.1.4.1.5.1.1.65.1.1.1 | ColumnaccServiceProfileName | read-only | mandatory | The name of the service profile. This name serves as the index for accessing information in the Sevice Profile Table. The service profile name is usually acqui… |
| 1.3.6.1.4.1.5.1.1.65.1.1.2 | ColumnaccServiceProfileType | read-write | mandatory | The type of service profile entry. MPBR is normal, multi- protocol bridge/router service. CDNR is partitioned access service via called number routing. |
| 1.3.6.1.4.1.5.1.1.65.1.1.3 | ColumnaccServiceProfileAdminState | read-write | mandatory | The administrative state of this service profile. If the administrative state is set to disabled, no new connections will be allowed using this profile, and al… |
| 1.3.6.1.4.1.5.1.1.65.1.1.4 | ColumnaccServiceProfileMsgLevel | read-write | mandatory | The current severity level of trap messages that may be generated regarding events associated with this service profile. Only trap messages whose serverity lev… |
| 1.3.6.1.4.1.5.1.1.65.1.1.5 | ColumnaccServiceProfilePppDefault | read-write | obsolete | The method used to set default PPP parameters. FACTORY indicates that factory defaults will be used or default parameters will be obtained from the usual sourc… |
| 1.3.6.1.4.1.5.1.1.65.1.1.6 | ColumnaccServiceProfileAuthMethod | read-write | mandatory | The default PPP authentication method for this service profile. |
| 1.3.6.1.4.1.5.1.1.65.1.1.7 | ColumnaccServiceProfilePortLimit | read-write | mandatory | The maximum port limit for this service profile. A value of 1 disables PPP multilink. A value greater than 1 enables multilink negotiation. |
| 1.3.6.1.4.1.5.1.1.65.1.1.8 | ColumnaccServiceProfileAccessPart | read-write | mandatory | The name of the access partition to use for this service. If the service type is CDNR, an access partition name must be configured and the corresponding access… |
| 1.3.6.1.4.1.5.1.1.65.1.1.9 | ColumnaccServiceProfileModemPool | read-write | mandatory | The name of the modem pool to use for providing service to switched users connecting via modems. If no modem pool is configured, a default modem pool will be u… |
| 1.3.6.1.4.1.5.1.1.65.1.1.10 | ColumnaccServiceProfileEntryStatus | read-write | mandatory | The modification status of this service profile entry. Setting the status to add causes a new entry to be added. Setting the status to deleete causes an existi… |
| 1.3.6.1.4.1.5.1.1.65.1.1.11 | ColumnaccServiceProfileBusyCount | read-only | mandatory | The number of internal resources currently bound to this service profile. If the busy count is non-zero, the service profile entry cannot be removed. |
| 1.3.6.1.4.1.5.1.1.65.1.1.12 | ColumnaccServiceProfileNumAccepts | read-only | mandatory | The number of incoming or outgoing connection requests accepted for this service profile. |
| 1.3.6.1.4.1.5.1.1.65.1.1.13 | ColumnaccServiceProfileNumRejects | read-only | mandatory | The number of incoming or outgoing connection requests rejected for this service profile. |
| 1.3.6.1.4.1.5.1.1.65.1.1.14 | ColumnaccServiceProfileNumActive | read-only | mandatory | The current number of connected physical ports using this service profile. Each physical link in a multilink bundle counts as one connection. |
| 1.3.6.1.4.1.5.1.1.65.1.1.15 | ColumnaccServiceProfileNumberGroup | read-write | mandatory | The calling number group to use for incoming call screening. The calling number group is defined in the Calling Number Table. If the calling number group is 0,… |
| 1.3.6.1.4.1.5.1.1.65.1.1.16 | ColumnaccServiceProfilePppMru | read-write | mandatory | The default maximum receive unit to negotiate for the PPP connection using this service profile. |
| 1.3.6.1.4.1.5.1.1.65.1.1.17 | ColumnaccServiceProfileMlpppMrru | read-write | mandatory | The default maximum reassembly receive unit to negotiate for the Multilink PPP connection using this service profile. |
| 1.3.6.1.4.1.5.1.1.65.1.1.18 | ColumnaccServiceProfileMlxState | read-write | obsolete | The default MLX administrative state for the Multilink PPP connection using this service profile. This object has been obsoleted with release 11.1. |
| 1.3.6.1.4.1.5.1.1.65.1.1.19 | ColumnaccServiceProfileWelcomeMessage | read-write | mandatory | This is the string that will be displayed when PPP scripting is enabled (sp LOGIN authentication mode) to welcome the user. It will appear before the username/… |
| 1.3.6.1.4.1.5.1.1.65.1.1.20 | ColumnaccServiceProfileLoginPrompt | read-write | mandatory | This is the string that will be displayed when PPP scripting is enabled (sp LOGIN authentication mode) to prompt the user for entry of a username. It will appe… |
| 1.3.6.1.4.1.5.1.1.65.1.1.21 | ColumnaccServiceProfilePasswordPrompt | read-write | mandatory | This is the string that will be displayed when PPP scripting is enabled (sp LOGIN authentication mode) to prompt the user for entry of a password. It will appe… |
| 1.3.6.1.4.1.5.1.1.65.1.1.22 | ColumnaccServiceProfileServicePrompt | read-write | mandatory | This is the string that will be displayed when PPP scripting is enabled (sp LOGIN authentication mode) after successful authentication has occurred. It will ap… |
| 1.3.6.1.4.1.5.1.1.65.1.1.23 | ColumnaccServiceProfileLoginTimeout | read-write | mandatory | The duration in seconds that the system will wait for an answer to a login/password prompt. After this timeout, the system will start normal PPP negotiation. Z… |
| 1.3.6.1.4.1.5.1.1.65.1.1.24 | ColumnaccServiceProfileAuthPreference | read-write | mandatory | The authentication preference for this service profile. This This object is useful for altering the behavior of PPP negotiation when providing service to cliet… |
| 1.3.6.1.4.1.5.1.1.65.1.1.25 | ColumnaccServiceProfileAccountingOptn | read-write | mandatory | The Accounting option for this service profile. This is used to enable or disable RADIUS accounting for PPP sessions associated with this service profile. RADI… |
| 1.3.6.1.4.1.5.1.1.65.1.1.26 | ColumnaccServiceProfileBandwidthMgmt | read-write | mandatory | The bandwidth management protocols that can be negotiated for PPP connections associated with this service profile. BACP enables the negotiation of the Bandwid… |
| 1.3.6.1.4.1.5.1.1.65.1.1.27 | ColumnaccServiceProfilePppIpComp | read-write | mandatory | The VJ header compression option for this service profile. |
| 1.3.6.1.4.1.5.1.1.65.2 | TableaccServiceProfilePortTable | not-accessible | mandatory | The Service Profile Port Table |
| 1.3.6.1.4.1.5.1.1.65.2.1 | RowaccServiceProfilePortEntry | not-accessible | mandatory | An entry in the Service Profile Port Table |
| 1.3.6.1.4.1.5.1.1.65.2.1.1 | ColumnaccServiceProfileIfIndex | read-only | mandatory | The interface index of the physical port associated with this entry. |
| 1.3.6.1.4.1.5.1.1.65.2.1.2 | ColumnaccServiceProfileConfiguredName | read-only | mandatory | The name of the service profile configured for this physical port. |
| 1.3.6.1.4.1.5.1.1.65.2.1.3 | ColumnaccServiceProfileActiveName | read-only | mandatory | The name of the service profile currently active for this physical port. If a service profile has been manually configured for this port, the active profile wi… |
| 1.3.6.1.4.1.5.1.1.65.2.1.4 | ColumnaccServiceProfileActiveType | read-only | mandatory | The type of service associated with the active service profile. |