ACC-X25
177 objects
No module-level DESCRIPTION found.
Imported Objects
| ACC-MIB | accBRG DisplayString IfIndex RowStatus SmdsAddress |
| ACC-SYSTEM | accTrapLogSeqNum |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter Gauge IpAddress NetworkAddress OBJECT-TYPE TimeTicks |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.5.1.1.17 | NodeaccX25 | |||
| 1.3.6.1.4.1.5.1.1.17.1 | TableaccX25AtTable | not-accessible | mandatory | Address translation table for X.25 interfaces. This is a superset of the standard address translation table. Entries are added/deleted via management action. |
| 1.3.6.1.4.1.5.1.1.17.1.1 | RowaccX25AtEntry | not-accessible | mandatory | Address translation entry for X.25 interfaces. |
| 1.3.6.1.4.1.5.1.1.17.1.1.1 | ColumnaccX25AtIfIndex | read-write | mandatory | Interface number (ifIndex) for which this translation entry is valid. |
| 1.3.6.1.4.1.5.1.1.17.1.1.2 | ColumnaccX25AtIpAddress | read-write | mandatory | IP Address of this entry Set this object to NULL to delete entry. |
| 1.3.6.1.4.1.5.1.1.17.1.1.3 | ColumnaccX25AtNetInOutAddr | read-write | mandatory | X.25 address to use when calling this destination. (both X.25 addresses are checked when mapping an X.25 address to an IP address) Object required in entry-add… |
| 1.3.6.1.4.1.5.1.1.17.1.1.4 | ColumnaccX25AtNetInAddr | read-write | mandatory | Alternate X.25 address to check when mapping an X.25 address to an IP address Object will be set to default value if not present in entry-adding SET PDU. |
| 1.3.6.1.4.1.5.1.1.17.1.1.5 | ColumnaccX25AtNetFacIndex | read-write | mandatory | Index of optional facility string or 0. |
| 1.3.6.1.4.1.5.1.1.17.2 | TableaccX25SubnetParmTable | not-accessible | mandatory | Per-network parameters for IP networks attached via X.25 interface. Entries added/deleted via management action. |
| 1.3.6.1.4.1.5.1.1.17.2.1 | RowaccX25SubnetParmEntry | not-accessible | mandatory | X.25-specific parameters for this IP network |
| 1.3.6.1.4.1.5.1.1.17.2.1.1 | ColumnaccX25SubnetAddr | read-write | mandatory | Network/subnet number of IP network Set this object to NULL to delete entry. |
| 1.3.6.1.4.1.5.1.1.17.2.1.2 | ColumnaccX25Facility | read-write | mandatory | selects whether DDN Standard Mode facility is included in call requests. |
| 1.3.6.1.4.1.5.1.1.17.2.1.3 | ColumnaccX25PktNegot | read-write | mandatory | specifies value for Packet Size Negotiation Facility (power of 2 between 16 and 1024), or zero if Packet Size Negotiation Facility is not to be used. |
| 1.3.6.1.4.1.5.1.1.17.2.1.4 | ColumnaccX25WindowNegot | read-write | mandatory | specifies value for Window Size Negotiation Facility (between 1 and 127 inclusive), or zero if Window Size Negotiation Facility is not to be used. |
| 1.3.6.1.4.1.5.1.1.17.3 | TableaccX25PortParmTable | not-accessible | mandatory | Per-port parameters for X.25 interfaces. |
| 1.3.6.1.4.1.5.1.1.17.3.1 | RowaccX25PortParmEntry | not-accessible | mandatory | X25 parameters of a specific port. |
| 1.3.6.1.4.1.5.1.1.17.3.1.1 | ColumnaccX25PortParmIndex | read-only | mandatory | Port number |
| 1.3.6.1.4.1.5.1.1.17.3.1.2 | ColumnaccX25AddrMode | read-write | mandatory | specifies address translation technique. |
| 1.3.6.1.4.1.5.1.1.17.3.1.3 | ColumnaccX25PktSize | read-write | mandatory | specifies default data packet size for this port. |
| 1.3.6.1.4.1.5.1.1.17.3.1.4 | ColumnaccX25PktWind | read-write | mandatory | specifies default packet window size for this port. |
| 1.3.6.1.4.1.5.1.1.17.3.1.5 | ColumnaccX25SvcNumber | read-write | mandatory | specifies maximum number of switched virtual circuits to be used on this port. |
| 1.3.6.1.4.1.5.1.1.17.3.1.6 | ColumnaccX25SvcBase | read-write | mandatory | specifies lowest Logical Channel Identifier to be used for switched virtual circuits. |
| 1.3.6.1.4.1.5.1.1.17.3.1.7 | ColumnaccX25ExtendClr | read-write | mandatory | specifies whether extended format for call clearing packets (as defined by X.25-1984) is permitted |
| 1.3.6.1.4.1.5.1.1.17.3.1.8 | ColumnaccX25ExtendSeq | read-write | mandatory | Use of extended sequence numbers |
| 1.3.6.1.4.1.5.1.1.17.3.1.9 | ColumnaccX25IdleMin | read-write | mandatory | minimum idle time for closing circuits; a circuit will not be cleared until it has been idle (no data has been sent or received) for at least this amount of ti… |
| 1.3.6.1.4.1.5.1.1.17.3.1.10 | ColumnaccX25IdleMax | read-write | mandatory | maximum idle time for closing circuits; a circuit will be cleared when its idle time exceeds this value. |
| 1.3.6.1.4.1.5.1.1.17.3.1.11 | ColumnaccX25IdleScale | read-write | mandatory | scale factor for idle timeout: a circuit will be cleared when it has been idle for accX25IdleMin plus accX25IdleScale times the number of available circuits. |
| 1.3.6.1.4.1.5.1.1.17.3.1.12 | ColumnaccX25SvcMax | read-write | mandatory | Maximum number of virtual circuits which can be opened to a single destination. |
| 1.3.6.1.4.1.5.1.1.17.3.1.13 | ColumnaccX25SvcLimit | read-write | mandatory | Maximum number of switched virtual circuits that IP can use. The value must not exceed the total number of logical channels available on this trunk. |
| 1.3.6.1.4.1.5.1.1.17.3.1.14 | ColumnaccX25OpenThresh | read-write | mandatory | Threshold (number of IP datagrams queued per circuit) at which an additional virtual circuit will be opened. |
| 1.3.6.1.4.1.5.1.1.17.3.1.15 | ColumnaccX25SvcMin | read-write | mandatory | The minimum number of virtual circuits which IP will leave available for first circuits to other destinations |
| 1.3.6.1.4.1.5.1.1.17.3.1.16 | ColumnaccX25SvcDelay | read-write | mandatory | Delay (seconds) between opening of successive virtual circuits to same destination. |
| 1.3.6.1.4.1.5.1.1.17.3.1.17 | ColumnaccX25InitBackoff | read-write | mandatory | Initial backoff time (seconds) to delay before next attempt to open an additional virtual circuit to the same destination when an attempt to do so has failed. |
| 1.3.6.1.4.1.5.1.1.17.3.1.18 | ColumnaccX25MaxBackoff | read-write | mandatory | Maximum backoff time (seconds) to delay between subsequent attempts to open additional virtual circuits to the same destination. The actual delay is varied exp… |
| 1.3.6.1.4.1.5.1.1.17.3.1.19 | ColumnaccX25OurAddress | read-write | mandatory | Our X25 address (put in outbound packets) |
| 1.3.6.1.4.1.5.1.1.17.3.1.20 | ColumnaccX25PvcBase | read-write | mandatory | Lowest LCID to be used for PVCs. |
| 1.3.6.1.4.1.5.1.1.17.3.1.21 | ColumnaccX25PvcNumber | read-write | mandatory | Maximum number of PVCs. |
| 1.3.6.1.4.1.5.1.1.17.3.1.22 | ColumnaccX25Tx0Timer | read-write | mandatory | Value for T10 (DCE) or T20 (DTE) timer. |
| 1.3.6.1.4.1.5.1.1.17.3.1.23 | ColumnaccX25Tx1Timer | read-write | mandatory | Value for T11 (DCE) or T21 (DTE) timer. |
| 1.3.6.1.4.1.5.1.1.17.3.1.24 | ColumnaccX25Tx2Timer | read-write | mandatory | Value for T12 (DCE) or T22 (DTE) timer. |
| 1.3.6.1.4.1.5.1.1.17.3.1.25 | ColumnaccX25Tx3Timer | read-write | mandatory | Value for T13 (DCE) or T23 (DTE) timer. |
| 1.3.6.1.4.1.5.1.1.17.3.1.26 | ColumnaccX25PortEventSeverityLevel | read-write | mandatory | The base severity level which events are recorded. |
| 1.3.6.1.4.1.5.1.1.17.4 | TableaccX25PktStatTable | not-accessible | mandatory | Per-port packet statistics for X.25 interfaces. |
| 1.3.6.1.4.1.5.1.1.17.4.1 | RowaccX25PktStatEntry | not-accessible | mandatory | X.25 packet level statistics for an X.25 interface. |
| 1.3.6.1.4.1.5.1.1.17.4.1.1 | ColumnaccX25PktIndex | read-only | mandatory | Port number of this X.25 interface. |
| 1.3.6.1.4.1.5.1.1.17.4.1.2 | ColumnaccX25RcvDiags | read-only | mandatory | Number of Diagnostic packets received on this port. |
| 1.3.6.1.4.1.5.1.1.17.4.1.3 | ColumnaccX25RcvRestartReqs | read-only | mandatory | Number of Restart Request (Restart Indication) packets received on this port. |
| 1.3.6.1.4.1.5.1.1.17.4.1.4 | ColumnaccX25RcvRestartConfs | read-only | mandatory | Number of Restart Confirmation packets received on this port. |
| 1.3.6.1.4.1.5.1.1.17.4.1.5 | ColumnaccX25RcvCallReqs | read-only | mandatory | Number of Call Request (Incoming Call) packets received on this port. |
| 1.3.6.1.4.1.5.1.1.17.4.1.6 | ColumnaccX25RcvCallAccs | read-only | mandatory | Number of Call Accepted (Call Connected) packets received on this port. |
| 1.3.6.1.4.1.5.1.1.17.4.1.7 | ColumnaccX25RcvClrReqs | read-only | mandatory | Number of Clear Request (Clear Indication) packets received on this port. |
| 1.3.6.1.4.1.5.1.1.17.4.1.8 | ColumnaccX25RcvClrConfs | read-only | mandatory | Number of Clear Confirmation packets received on this port. |
| 1.3.6.1.4.1.5.1.1.17.4.1.9 | ColumnaccX25RcvResetReqs | read-only | mandatory | Number of Reset Request (Reset Indication) packets received on this port. |
| 1.3.6.1.4.1.5.1.1.17.4.1.10 | ColumnaccX25RcvResetConfs | read-only | mandatory | Number of Reset Confirmation packets received on this port. |
| 1.3.6.1.4.1.5.1.1.17.4.1.11 | ColumnaccX25RcvInts | read-only | mandatory | Number of Interrupt packets received on this port. |
| 1.3.6.1.4.1.5.1.1.17.4.1.12 | ColumnaccX25RcvIntConfs | read-only | mandatory | Number of Interrupt Confirmation packets received on this port. |
| 1.3.6.1.4.1.5.1.1.17.4.1.13 | ColumnaccX25RcvRRs | read-only | mandatory | Number of RR [Receive Ready] packets received on this port. |
| 1.3.6.1.4.1.5.1.1.17.4.1.14 | ColumnaccX25RcvRNRs | read-only | mandatory | Number of RNR [Receive Not Ready] packets received on this port. |
| 1.3.6.1.4.1.5.1.1.17.4.1.15 | ColumnaccX25RcvDatas | read-only | mandatory | Number of Data packets received on this port. |
| 1.3.6.1.4.1.5.1.1.17.4.1.16 | ColumnaccX25XmtDiags | read-only | mandatory | Number of Diagnostic packets transmitted on this port. |
| 1.3.6.1.4.1.5.1.1.17.4.1.17 | ColumnaccX25XmtRestartReqs | read-only | mandatory | Number of Restart Request (Restart Indication) packets transmitted on this port. |
| 1.3.6.1.4.1.5.1.1.17.4.1.18 | ColumnaccX25XmtRestartConfs | read-only | mandatory | Number of Restart Confirmation packets transmitted on this port. |
| 1.3.6.1.4.1.5.1.1.17.4.1.19 | ColumnaccX25XmtCallReqs | read-only | mandatory | Number of Call Request (Incoming Call) packets transmitted on this port. |
| 1.3.6.1.4.1.5.1.1.17.4.1.20 | ColumnaccX25XmtCallAccs | read-only | mandatory | Number of Call Accepted (Call Connected) packets transmitted on this port. |
| 1.3.6.1.4.1.5.1.1.17.4.1.21 | ColumnaccX25XmtClrReqs | read-only | mandatory | Number of Clear Request (Clear Indication) packets transmitted on this port. |
| 1.3.6.1.4.1.5.1.1.17.4.1.22 | ColumnaccX25XmtClrConfs | read-only | mandatory | Number of Clear Confirmation packets transmitted on this port. |
| 1.3.6.1.4.1.5.1.1.17.4.1.23 | ColumnaccX25XmtResetReqs | read-only | mandatory | Number of Reset Request (Reset Indication) packets transmitted on this port. |
| 1.3.6.1.4.1.5.1.1.17.4.1.24 | ColumnaccX25XmtResetConfs | read-only | mandatory | Number of Reset Confirmation packets transmitted on this port. |
| 1.3.6.1.4.1.5.1.1.17.4.1.25 | ColumnaccX25XmtInts | read-only | mandatory | Number of Interrupt packets transmitted on this port. |
| 1.3.6.1.4.1.5.1.1.17.4.1.26 | ColumnaccX25XmtIntConfs | read-only | mandatory | Number of Interrupt Confirmation packets transmitted on this port. |
| 1.3.6.1.4.1.5.1.1.17.4.1.27 | ColumnaccX25XmtRRs | read-only | mandatory | Number of RR [Receive Ready] packets transmitted on this port. |
| 1.3.6.1.4.1.5.1.1.17.4.1.28 | ColumnaccX25XmtRNRs | read-only | mandatory | Number of RNR [Receive Not Ready] packets transmitted on this port. |
| 1.3.6.1.4.1.5.1.1.17.4.1.29 | ColumnaccX25XmtDatas | read-only | mandatory | Number of Data packets transmitted on this port. |
| 1.3.6.1.4.1.5.1.1.17.4.1.30 | ColumnaccX25OpenSvcCounts | read-only | mandatory | Count of SVCs open on this port. |
| 1.3.6.1.4.1.5.1.1.17.5 | TableaccX25OptFacTable | not-accessible | mandatory | Optional facility string table. |
| 1.3.6.1.4.1.5.1.1.17.5.1 | RowaccX25OptFacEntry | not-accessible | mandatory | A single optional facility entry. |
| 1.3.6.1.4.1.5.1.1.17.5.1.1 | ColumnaccX25OptFacIndex | read-write | mandatory | Index of this entry in table [1..n]. |
| 1.3.6.1.4.1.5.1.1.17.5.1.2 | ColumnaccX25OptFacString | read-write | mandatory | facility string to be added when placing calls. |
| 1.3.6.1.4.1.5.1.1.17.6 | TableaccX25PvcAddrTable | not-accessible | mandatory | PVC to X.25 address mapping table. |
| 1.3.6.1.4.1.5.1.1.17.6.1 | RowaccX25PvcAddrEntry | not-accessible | mandatory | A single PVC to X.25 address mapping entry. |
| 1.3.6.1.4.1.5.1.1.17.6.1.1 | ColumnaccX25PvcLine | read-write | mandatory | Physical port for which this entry applies. Same is ifIndex. |
| 1.3.6.1.4.1.5.1.1.17.6.1.2 | ColumnaccX25PvcAddrLcid | read-write | mandatory | PVC logical channel ID . |
| 1.3.6.1.4.1.5.1.1.17.6.1.3 | ColumnaccX25PvcAddrString | read-write | mandatory | X.25 address to associate with this PVC. |
| 1.3.6.1.4.1.5.1.1.17.6.1.4 | ColumnaccX25PvcProtocol | read-write | mandatory | PVC Protocol Associated with this line and the LCID . |
| 1.3.6.1.4.1.5.1.1.17.8 | NodeaccX25Switch | |||
| 1.3.6.1.4.1.5.1.1.17.8.1 | ScalaraccX25SwitchStatus | read-write | mandatory | This Object controls whether X.25 switching is enabled or disabled. |
| 1.3.6.1.4.1.5.1.1.17.8.2 | ScalaraccX25SwitchConnections | read-only | mandatory | This Object indicates the current number of X.25 connections that are being switched through this router. |
| 1.3.6.1.4.1.5.1.1.17.8.3 | ScalaraccX25SwitchCallSucceeds | read-only | mandatory | This Object indicates the total number of X.25 calls that have been switched by this router. |
| 1.3.6.1.4.1.5.1.1.17.8.4 | ScalaraccX25SwitchCallFails | read-only | mandatory | This Object indicates the total number of X.25 calls that this router has been unable to switch. |
| 1.3.6.1.4.1.5.1.1.17.8.5 | TableaccX25SwitchConnTable | not-accessible | mandatory | This Table contains objects which report information about the X.25 calls currently being switched through this router. |
| 1.3.6.1.4.1.5.1.1.17.8.5.1 | RowaccX25SwitchConnEntry | not-accessible | mandatory | The entry part of accX25SwitchConnTable. |
| 1.3.6.1.4.1.5.1.1.17.8.5.1.1 | ColumnaccX25SwitchConnCallingIfIndex | read-only | mandatory | An Integer that identifies the row of the system wide interfaces table associated with the X.25 interface which initiated the connection. |
| 1.3.6.1.4.1.5.1.1.17.8.5.1.2 | ColumnaccX25SwitchConnCallingIndex | read-only | mandatory | An Integer that uniquely identifies the virtual circuit for the initiating interface. For X.25 ports, this will be the LCN. For the TCP ports, this will be the… |
| 1.3.6.1.4.1.5.1.1.17.8.5.1.3 | ColumnaccX25SwitchConnCallingType | read-only | mandatory | An integer that indicates the calling type. |
| 1.3.6.1.4.1.5.1.1.17.8.5.1.4 | ColumnaccX25SwitchConnCallingX121Addr | read-only | mandatory | A string that contains the Calling X.121 address that initiated the connection. |
| 1.3.6.1.4.1.5.1.1.17.8.5.1.5 | ColumnaccX25SwitchConnCallingPkts | read-only | mandatory | A counter which keeps track of the number of packets sent from the calling to the called port. |
| 1.3.6.1.4.1.5.1.1.17.8.5.1.6 | ColumnaccX25SwitchConnCallingOctets | read-only | mandatory | A counter which keeps track of the number of octets sent from the calling to the called port. |
| 1.3.6.1.4.1.5.1.1.17.8.5.1.7 | ColumnaccX25SwitchConnCalledIfIndex | read-only | mandatory | An Integer that identifies the row of the system wide interfaces table associated with the X.25 interface which propagated the connection. |
| 1.3.6.1.4.1.5.1.1.17.8.5.1.8 | ColumnaccX25SwitchConnCalledIndex | read-only | mandatory | An Integer that uniquely identifies the virtual circuit for the outgoing interface. For X.25 ports, this will be the LCN. For the TCP ports, this will be the l… |
| 1.3.6.1.4.1.5.1.1.17.8.5.1.9 | ColumnaccX25SwitchConnCalledType | read-only | mandatory | An integer that indicates the called type. |
| 1.3.6.1.4.1.5.1.1.17.8.5.1.10 | ColumnaccX25SwitchConnCalledX121Addr | read-only | mandatory | A string that contains the Called X.121 address that initiated the connection. |
| 1.3.6.1.4.1.5.1.1.17.8.5.1.11 | ColumnaccX25SwitchConnCalledPkts | read-only | mandatory | A counter which keeps track of the number of packets sent from the calling to the called port. |
| 1.3.6.1.4.1.5.1.1.17.8.5.1.12 | ColumnaccX25SwitchConnCalledOctets | read-only | mandatory | A counter which keeps track of the number of octets sent from the calling to the called port. |
| 1.3.6.1.4.1.5.1.1.17.8.5.1.13 | ColumnaccX25SwitchConnState | read-only | mandatory | An integer that indicates the state of the switched X.25 circuit. |
| 1.3.6.1.4.1.5.1.1.17.8.6 | TableaccX25SwitchAddrTransTable | not-accessible | mandatory | This Table contains objects which control the translation of X.121 addresses. |
| 1.3.6.1.4.1.5.1.1.17.8.6.1 | RowaccX25SwitchAddrTransEntry | not-accessible | mandatory | The entry part for the AddrTrans Table. |
| 1.3.6.1.4.1.5.1.1.17.8.6.1.1 | ColumnaccX25SwitchAddrTransIfIndex | read-write | mandatory | An Integer that identifies the row of the system wide interfaces table associated with the X.25 interface that receives the call request. |
| 1.3.6.1.4.1.5.1.1.17.8.6.1.2 | ColumnaccX25SwitchAddrTransDir | read-write | mandatory | An Integer that identifies whether this entry applies to inbound or to outbound switched X.25 calls. |
| 1.3.6.1.4.1.5.1.1.17.8.6.1.3 | ColumnaccX25SwitchAddrTransType | read-write | mandatory | An Integer that identifies whether this entry applies to called or to calling X.121 addresses. |
| 1.3.6.1.4.1.5.1.1.17.8.6.1.4 | ColumnaccX25SwitchAddrTransPattern | read-write | mandatory | A character string which defines the matching pattern for incoming called X.121 addresses. |
| 1.3.6.1.4.1.5.1.1.17.8.6.1.5 | ColumnaccX25SwitchAddrTransReplace | read-write | mandatory | A character string which defines the replacement pattern for incoming called X.121 addresses. |
| 1.3.6.1.4.1.5.1.1.17.8.6.1.6 | ColumnaccX25SwitchAddrTransStatus | read-write | mandatory | An Integer that defines the status of the table row. |
| 1.3.6.1.4.1.5.1.1.17.8.7 | TableaccX25SwitchRouteTable | not-accessible | mandatory | This Table contains objects which determine the switching of incoming X.25 calls. |
| 1.3.6.1.4.1.5.1.1.17.8.7.1 | RowaccX25SwitchRouteEntry | not-accessible | mandatory | The entry part for the Route Table. |
| 1.3.6.1.4.1.5.1.1.17.8.7.1.1 | ColumnaccX25SwitchRoutePattern | read-write | mandatory | A character string which defines the matching pattern for the incoming called X.121 addresses. |
| 1.3.6.1.4.1.5.1.1.17.8.7.1.2 | ColumnaccX25SwitchRouteIfIndex | read-write | mandatory | An Integer that identifies the row of the system wide interfaces table associated with the X.25 interface which receives the call request. |
| 1.3.6.1.4.1.5.1.1.17.8.7.1.3 | ColumnaccX25SwitchRouteStatus | read-write | mandatory | An Integer that defines the status of the table row. |
| 1.3.6.1.4.1.5.1.1.17.8.8 | TableaccX25SwitchExtRtTable | not-accessible | mandatory | This Table contains an extended set of objects which determine the switching of incoming X.25 calls. |
| 1.3.6.1.4.1.5.1.1.17.8.8.1 | RowaccX25SwitchExtRtEntry | not-accessible | mandatory | The entry part for the Extended Route Table. |
| 1.3.6.1.4.1.5.1.1.17.8.8.1.1 | ColumnaccX25SwitchExtRtIndex | read-write | mandatory | An Integer that uniquely identifies this row of the Extended Switching Table. |
| 1.3.6.1.4.1.5.1.1.17.8.8.1.2 | ColumnaccX25SwitchExtRtIfIn | read-write | mandatory | An Integer that identifies the row of the system wide interfaces table associated with the X.25 interface which receives the call request. This column must mat… |
| 1.3.6.1.4.1.5.1.1.17.8.8.1.3 | ColumnaccX25SwitchExtRtAddr | read-write | mandatory | A character string which defines the matching pattern for the incoming called X.121 addresses. |
| 1.3.6.1.4.1.5.1.1.17.8.8.1.4 | ColumnaccX25SwitchExtRtCUD | read-write | mandatory | A octet string which defines the matching pattern for the incoming Call User Data. A zero length octet string matches any Call User Data contents (including no… |
| 1.3.6.1.4.1.5.1.1.17.8.8.1.5 | ColumnaccX25SwitchExtRtDisp | read-write | mandatory | An Integer that specifies the disposition of incoming calls that match this table entry. A value of 'switch' causes matching calls to be switched out the inter… |
| 1.3.6.1.4.1.5.1.1.17.8.8.1.6 | ColumnaccX25SwitchExtRtIfOut | read-write | mandatory | An Integer that identifies the row of the system wide interfaces table associated with the X.25 interface to which the call will be switched. This column is on… |
| 1.3.6.1.4.1.5.1.1.17.8.8.1.7 | ColumnaccX25SwitchExtRtStatus | read-write | mandatory | An Integer that defines the status of the table row. |
| 1.3.6.1.4.1.5.1.1.17.9 | ScalaraccX25EventLogSize | read-write | mandatory | The number of entries to maintain in the event table |
| 1.3.6.1.4.1.5.1.1.17.10 | TableaccX25EventTable | not-accessible | mandatory | Event and exception logging table. |
| 1.3.6.1.4.1.5.1.1.17.10.1 | RowaccX25EventEntry | not-accessible | mandatory | A single event or exception record. |
| 1.3.6.1.4.1.5.1.1.17.10.1.1 | ColumnaccX25EventSeq | read-only | mandatory | A unique sequential number for the logged event. |
| 1.3.6.1.4.1.5.1.1.17.10.1.2 | ColumnaccX25EventLine | read-only | mandatory | Physical port which encountered the event. |
| 1.3.6.1.4.1.5.1.1.17.10.1.3 | ColumnaccX25EventLCID | read-only | mandatory | The logical circuit id for the circuit which encountered the event. |
| 1.3.6.1.4.1.5.1.1.17.10.1.4 | ColumnaccX25EventUpTime | read-only | mandatory | SysUpTime when event occurred. |
| 1.3.6.1.4.1.5.1.1.17.10.1.5 | ColumnaccX25EventCode | read-write | mandatory | Code indicating the type of event being logged. |
| 1.3.6.1.4.1.5.1.1.17.10.1.6 | ColumnaccX25EventCause | read-only | mandatory | Cause octet from close packet. |
| 1.3.6.1.4.1.5.1.1.17.10.1.7 | ColumnaccX25EventDiag | read-only | mandatory | Diagnostic octet from close packet. |
| 1.3.6.1.4.1.5.1.1.17.10.1.8 | ColumnaccX25EventProtocol | read-only | mandatory | Protocol which encountered the event. |
| 1.3.6.1.4.1.5.1.1.17.10.1.9 | ColumnaccX25EventPacket | read-only | mandatory | Packet that triggered the log entry (if available). |
| 1.3.6.1.4.1.5.1.1.17.11 | TableaccX25CircuitTable | not-accessible | mandatory | The X.25 Circuit information table. |
| 1.3.6.1.4.1.5.1.1.17.11.1 | RowaccX25CircuitEntry | not-accessible | mandatory | A single Circuit information record. |
| 1.3.6.1.4.1.5.1.1.17.11.1.1 | ColumnaccX25CircuitLine | read-only | mandatory | Physical port on which the circuit is established. |
| 1.3.6.1.4.1.5.1.1.17.11.1.2 | ColumnaccX25CircuitLCID | read-only | mandatory | The logical circuit ID also called the logical channel number (LCN). |
| 1.3.6.1.4.1.5.1.1.17.11.1.3 | ColumnaccX25CircuitType | read-only | mandatory | The type of circuit. |
| 1.3.6.1.4.1.5.1.1.17.11.1.4 | ColumnaccX25CircuitRemoteAddr | read-only | mandatory | X.25 remote address associated with this circuit. |
| 1.3.6.1.4.1.5.1.1.17.11.1.5 | ColumnaccX25CircuitLocalAddr | read-only | mandatory | X.25 local address associated with this circuit. |
| 1.3.6.1.4.1.5.1.1.17.11.1.6 | ColumnaccX25CircuitState | read-only | mandatory | Current state of the circuit. |
| 1.3.6.1.4.1.5.1.1.17.11.1.7 | ColumnaccX25CircuitPktTimer | read-only | mandatory | Packet level timeout value for this circuit. |
| 1.3.6.1.4.1.5.1.1.17.11.1.8 | ColumnaccX25CircuitPktRetry | read-only | mandatory | Packet level retry count for this circuit. |
| 1.3.6.1.4.1.5.1.1.17.12 | NodeaccX25Xot | |||
| 1.3.6.1.4.1.5.1.1.17.12.1 | TableaccX25XotParmTable | not-accessible | mandatory | XOT parameter table. |
| 1.3.6.1.4.1.5.1.1.17.12.1.1 | RowaccX25XotParmEntry | not-accessible | mandatory | The entry part of accX25XotParmEntry. |
| 1.3.6.1.4.1.5.1.1.17.12.1.1.1 | ColumnaccX25XotParmLine | read-write | mandatory | Virtual port for which this entry applies. |
| 1.3.6.1.4.1.5.1.1.17.12.1.1.2 | ColumnaccX25XotParmIpAddress | read-write | mandatory | IP Address for virtual port. |
| 1.3.6.1.4.1.5.1.1.17.12.1.1.3 | ColumnaccX25XotParmMsgLevel | read-write | mandatory | Debug message level for virtual port. |
| 1.3.6.1.4.1.5.1.1.17.12.2 | TableaccX25XotConnTable | not-accessible | mandatory | This Table contains objects which report information about the X.25 XOT calls currently being switched through this router. |
| 1.3.6.1.4.1.5.1.1.17.12.2.1 | RowaccX25XotConnEntry | not-accessible | mandatory | The entry part of accX25XotConnEntry. |
| 1.3.6.1.4.1.5.1.1.17.12.2.1.1 | ColumnaccX25XotConnLine | read-only | mandatory | Virtual port for which this entry applies. |
| 1.3.6.1.4.1.5.1.1.17.12.2.1.2 | ColumnaccX25XotConnLcn | read-only | mandatory | The LCN of the virtual circuit for the initiating interface. |
| 1.3.6.1.4.1.5.1.1.17.12.2.1.3 | ColumnaccX25XotConnState | read-only | mandatory | An integer that indicates the state of the circuit. |
| 1.3.6.1.4.1.5.1.1.17.12.2.1.4 | ColumnaccX25XotConnType | read-only | mandatory | An integer that indicates the circuit type. |
| 1.3.6.1.4.1.5.1.1.17.12.2.1.5 | ColumnaccX25XotConnIpAddress | read-only | mandatory | IP Address for this XOT. |
| 1.3.6.1.4.1.5.1.1.17.12.2.1.6 | ColumnaccX25XotConnTcpPortNumber | read-only | mandatory | TCP port number for this connection. |
| 1.3.6.1.4.1.5.1.1.17.12.2.1.7 | ColumnaccX25XotConnRemoteIpAddress | read-write | mandatory | IP Address for the remote XOT. |
| 1.3.6.1.4.1.5.1.1.17.12.2.1.8 | ColumnaccX25XotConnRemoteTCPPortNumber | read-only | mandatory | remote TCP port number for this connection. |
| 1.3.6.1.4.1.5.1.1.17.12.2.1.9 | ColumnaccX25XotConnRcvEncaps | read-only | mandatory | The total number of encapsulated packets received by the XOT for this connection. |
| 1.3.6.1.4.1.5.1.1.17.12.2.1.10 | ColumnaccX25XotConnXmtEncaps | read-only | mandatory | The total number of encapsulated packets transmitted by the XOT for this connection. |
| 1.3.6.1.4.1.5.1.1.17.12.4 | TableaccX25XotStatsTable | not-accessible | mandatory | This Table contains objexts which report the accumulated counts for X.25 packet activity and TCP connections for an XOT virtual port. |
| 1.3.6.1.4.1.5.1.1.17.12.4.1 | RowaccX25XotStatsEntry | not-accessible | mandatory | The entry part of accX25XotStatsEntry. |
| 1.3.6.1.4.1.5.1.1.17.12.4.1.1 | ColumnaccX25XotStatsLine | read-only | mandatory | Virtual port for which this entry applies. |
| 1.3.6.1.4.1.5.1.1.17.12.4.1.2 | ColumnaccX25XotStatsTotalConnections | read-only | mandatory | The total number of TCP connections for the XOT on this router. |
| 1.3.6.1.4.1.5.1.1.17.12.4.1.3 | ColumnaccX25XotStatsActiveConnections | read-only | mandatory | The current number of active TCP connections for the XOT on this router. |
| 1.3.6.1.4.1.5.1.1.17.12.4.1.4 | ColumnaccX25XotStatsRcvInvalids | read-only | mandatory | The total number of invalid packets received by the XOT from TCP connections on this router. |
| 1.3.6.1.4.1.5.1.1.17.12.4.1.5 | ColumnaccX25XotStatsGenClearReqs | read-only | mandatory | The total number of clear packets generated by the XOT. |
| 1.3.6.1.4.1.5.1.1.17.12.4.1.6 | ColumnaccX25XotStatsGenResetReqs | read-only | mandatory | The total number of reset packets generated by the XOT. |
| 1.3.6.1.4.1.5.1.1.17.12.4.1.7 | ColumnaccX25XotStatsGenPvcSetups | read-only | mandatory | The total number of PVC setup packets generated by the XOT on this virtual port |
| 1.3.6.1.4.1.5.1.1.17.12.4.1.8 | ColumnaccX25XotStatsRcvValids | read-only | mandatory | The total number of valid packets received by the XOT from TCP connections on this router. |
| 1.3.6.1.4.1.5.1.1.17.12.4.1.9 | ColumnaccX25XotStatsXmtTotals | read-only | mandatory | The total number of packets transmitted by the XOT over TCP connections on this router. |