ARRIS-D5-QAM-MIB
72 objects
Arris D5 UEQ QAM Management MIB
Imported Objects
| ARRIS-D5-VIDEO-MIB | D5Program |
| ARRIS-MIB | arrisD5UEQam |
| DOCS-IF-MIB | TenthdB TenthdBmV |
| ENTITY-MIB | PhysicalIndex |
| IF-MIB | ifIndex InterfaceIndex |
| INET-ADDRESS-MIB | InetPortNumber |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.4115.1.8.1.5 | Identityd5QamMib | Arris D5 UEQ QAM Management MIB | ||
| 1.3.6.1.4.1.4115.1.8.1.5.1 | Noded5QamRFObjects | |||
| 1.3.6.1.4.1.4115.1.8.1.5.1.1 | Tabled5QamRFChannelTable | not-accessible | current | This table extends docsIfDownstreamChannelTable with extra RF properties. |
| 1.3.6.1.4.1.4115.1.8.1.5.1.1.1 | Rowd5QamRFChannelEntry | not-accessible | current | An entry for a D5 QAM Channel RF Properties |
| 1.3.6.1.4.1.4115.1.8.1.5.1.1.1.1 | Columnd5QamRFChannelAnnex | read-create | current | The value of this object indicates the conformance of the implementation to important regional cable standards. annexA : Annex A from ITU-J83 is used. annexB :… |
| 1.3.6.1.4.1.4115.1.8.1.5.1.1.1.2 | Columnd5QamRFChannelFrequency | read-create | current | The center of the downstream frequency associated with this channel. |
| 1.3.6.1.4.1.4115.1.8.1.5.1.1.1.3 | Columnd5QamRFChannelModulation | read-create | current | The modulation type associated with this downstream channel. |
| 1.3.6.1.4.1.4115.1.8.1.5.1.1.1.4 | Columnd5QamRFChannelFECInterleaverLevel | read-create | current | This value contains the interleaving level in Annex B standard. Level 1 (static) is specified for 64-QAM transmission only. This mode accommodates the installe… |
| 1.3.6.1.4.1.4115.1.8.1.5.1.1.1.5 | Columnd5QamRFChannelFECInterleaverMode | read-create | current | This value contain the control word representing a specific interleaving depth for Annex B level 2 (variable) interleaving standard, which is one of the follow… |
| 1.3.6.1.4.1.4115.1.8.1.5.1.1.1.6 | Columnd5QamRFChannelPower | read-create | current | the transmit power associated with this channel. |
| 1.3.6.1.4.1.4115.1.8.1.5.1.1.1.7 | Columnd5QamRFChannelSpectralInversion | read-create | current | true(1) if QAM Channel carrier spectrum is inverted |
| 1.3.6.1.4.1.4115.1.8.1.5.1.1.1.8 | Columnd5QamRFChannelSymbolRate | read-create | current | Symbol rate of current transmission, this value is fixed for 64-QAM and 256-QAM transmission in Annex B standard. It is variable in Annex A standard and can on… |
| 1.3.6.1.4.1.4115.1.8.1.5.1.1.1.9 | Columnd5QamRFChannelWidth | read-create | current | The distance between the center frequencies of the downstream frequency associated with this channel. |
| 1.3.6.1.4.1.4115.1.8.1.5.1.1.1.99 | Columnd5QamRFChannelRowStatus | read-create | current | The RowStatus for controlling entries in this table. |
| 1.3.6.1.4.1.4115.1.8.1.5.3 | Noded5QamStatObjects | |||
| 1.3.6.1.4.1.4115.1.8.1.5.3.1 | Tabled5QamStatProgramCounterTable | not-accessible | current | This table contains counters of all MPEG packets whose PIDs are associated with a program currently being streamed through a QAM interface |
| 1.3.6.1.4.1.4115.1.8.1.5.3.1.1 | Rowd5QamStatProgramCounterEntry | not-accessible | current | An entry for a single program stream on a QAM interface |
| 1.3.6.1.4.1.4115.1.8.1.5.3.1.1.1 | Columnd5QamStatProgramCounterQamIfIndex | read-only | current | QAM interface associated with program stream. |
| 1.3.6.1.4.1.4115.1.8.1.5.3.1.1.2 | Columnd5QamStatProgramCounterProgram | read-only | current | Program Number of program stream. |
| 1.3.6.1.4.1.4115.1.8.1.5.3.1.1.3 | Columnd5QamStatProgramCounterPackets | read-only | current | Count of all MPEG packets associated with the program stream. |
| 1.3.6.1.4.1.4115.1.8.1.5.4 | Noded5QamSpareObjects | |||
| 1.3.6.1.4.1.4115.1.8.1.5.4.1 | Tabled5QamSpareGroupTable | not-accessible | current | This table contains QAM physical entities that are part of redundancy spare groups. Spare groups are identified by the spare entity itself through its physical… |
| 1.3.6.1.4.1.4115.1.8.1.5.4.1.1 | Rowd5QamSpareGroupEntry | not-accessible | current | Each entry describe a single QAM physical entity and its relationship to and role within a spare group. |
| 1.3.6.1.4.1.4115.1.8.1.5.4.1.1.1 | Columnd5QamSpareGroupPrimaryPhysicalIndex | read-only | current | The Physical Index of the QAM entity. |
| 1.3.6.1.4.1.4115.1.8.1.5.4.1.1.2 | Columnd5QamSpareGroupSparePhysicalIndex | read-create | current | The Physical Index of the QAM spare entity. Spare must identify itself. |
| 1.3.6.1.4.1.4115.1.8.1.5.4.1.1.3 | Columnd5QamSpareGroupFailbackMode | read-create | current | Must be 'none' for primary entities. For spare entities, it defines the failback mode when the fault has cleared. |
| 1.3.6.1.4.1.4115.1.8.1.5.4.1.1.4 | Columnd5QamSpareGroupFailoverStatus | read-only | current | The status of this physical entity in spare group. active: indicates that a primary entity is running normally. indicates that a spare entity has been failed o… |
| 1.3.6.1.4.1.4115.1.8.1.5.4.1.1.99 | Columnd5QamSpareGroupRowStatus | read-create | current | The RowStatus for controlling entries in this table. |
| 1.3.6.1.4.1.4115.1.8.1.5.4.2 | Noded5QamSpareGroupTraps | |||
| 1.3.6.1.4.1.4115.1.8.1.5.4.2.1 | Notificationd5QamSpareGroupFailOver | current | This event signifies that a primary QAM physical entity has been switched over to its spare. | |
| 1.3.6.1.4.1.4115.1.8.1.5.4.2.2 | Notificationd5QamSpareGroupFailBack | current | This event signifies that a primary QAM physical entity is no longer switched over to spare, which has been restored to stand-by duty. | |
| 1.3.6.1.4.1.4115.1.8.1.5.5 | Noded5QamDocsisObjects | |||
| 1.3.6.1.4.1.4115.1.8.1.5.5.1 | Tabled5QamDocsisChannelTable | not-accessible | current | This table extends docsIfDownstreamChannelTable with DOCSIS properties. |
| 1.3.6.1.4.1.4115.1.8.1.5.5.1.1 | Rowd5QamDocsisChannelEntry | not-accessible | current | An entry for a D5 QAM Channel DOCSIS Properties |
| 1.3.6.1.4.1.4115.1.8.1.5.5.1.1.1 | Columnd5QamDocsisChannelDtiOffset | read-write | current | DOCSIS Timing Interface: offset to be added to egress SYNC timestamp messages. |
| 1.3.6.1.4.1.4115.1.8.1.5.6 | Noded5QamMonitorObjects | |||
| 1.3.6.1.4.1.4115.1.8.1.5.6.1 | Noded5QamSnoopObjects | |||
| 1.3.6.1.4.1.4115.1.8.1.5.6.1.1 | Tabled5QamSnoopTable | not-accessible | current | This table lists of QAM channels under snoop. |
| 1.3.6.1.4.1.4115.1.8.1.5.6.1.1.1 | Rowd5QamSnoopEntry | not-accessible | current | An entry for a single D5 QAM channel snoop |
| 1.3.6.1.4.1.4115.1.8.1.5.6.1.1.1.1 | Columnd5QamSnoopProbe | read-only | current | This value returns the probe type for snooping, which can be one of: post-mux: probe after muxing stage and before RF modulation post-rf: probe after RF modula… |
| 1.3.6.1.4.1.4115.1.8.1.5.6.1.1.1.2 | Columnd5QamSnoopTSID | read-create | current | After row creation, this value is read only and returns the current Transport Stream Identifier for this QAM channel. On row creation, if this value is non-zer… |
| 1.3.6.1.4.1.4115.1.8.1.5.6.1.1.1.3 | Columnd5QamSnoopEncapsulation | read-create | current | The value contains the encapsulation type for snooped data. |
| 1.3.6.1.4.1.4115.1.8.1.5.6.1.1.1.4 | Columnd5QamSnoopIpSrc | read-only | current | This value returns the source IP address of snooped packets |
| 1.3.6.1.4.1.4115.1.8.1.5.6.1.1.1.5 | Columnd5QamSnoopPortSrc | read-only | current | This value returns the source port of snooped packets |
| 1.3.6.1.4.1.4115.1.8.1.5.6.1.1.1.6 | Columnd5QamSnoopIpDest | read-create | current | This value contains the target IP address of snooped packets |
| 1.3.6.1.4.1.4115.1.8.1.5.6.1.1.1.7 | Columnd5QamSnoopPortDest | read-create | current | This value contains the target port of snooped packets |
| 1.3.6.1.4.1.4115.1.8.1.5.6.1.1.1.99 | Columnd5QamSnoopRowStatus | read-create | current | The RowStatus for controlling entries in this table. |
| 1.3.6.1.4.1.4115.1.8.1.5.6.1.2 | Scalard5QamSnoopTOS | read-write | current | The value is used to fill in the Type Of Service field for egress IP packets containing snooped data. |
| 1.3.6.1.4.1.4115.1.8.1.5.6.1.3 | Scalard5QamSnoopVlanPriority | read-write | current | The value is used to fill in the VLAN priority field for egress Ethernet frames containing snooped IP packets. |
| 1.3.6.1.4.1.4115.1.8.1.5.6.2 | Noded5QamRFSignalObjects | |||
| 1.3.6.1.4.1.4115.1.8.1.5.6.2.1 | Tabled5QamRFSignalQualityTable | not-accessible | current | This table lists signal quality for QAM channels. |
| 1.3.6.1.4.1.4115.1.8.1.5.6.2.1.1 | Rowd5QamRFSignalQualityEntry | not-accessible | current | An entry for a single D5 QAM channel |
| 1.3.6.1.4.1.4115.1.8.1.5.6.2.1.1.1 | Columnd5QamRFSigQMeasureControl | read-create | current | This value indicates wether on-board demodulator scans this channel for RF signal quality measurement. |
| 1.3.6.1.4.1.4115.1.8.1.5.6.2.1.1.2 | Columnd5QamRFSigQMeasureDelay | read-create | current | This value contains the amount of time in milliseconds the demodulator stay on this channel once it has acquired a lock. The longer the time, the more relevant… |
| 1.3.6.1.4.1.4115.1.8.1.5.6.2.1.1.3 | Columnd5QamRFSigQMpegLock | read-only | current | This value returns whether the on-board demodulator has acquired a full MPEG lock the last time if was scanning this channel. |
| 1.3.6.1.4.1.4115.1.8.1.5.6.2.1.1.4 | Columnd5QamRFSigQBitErrorRate | read-only | current | This value returns the bit error rate measured during the last scan period. This value is in the order of 10E-08. |
| 1.3.6.1.4.1.4115.1.8.1.5.6.2.1.1.5 | Columnd5QamRFSigQUnerroreds | read-only | current | The value returns the accumulated count of unerrored codewords for all previous scan periods since this counter was cleared. |
| 1.3.6.1.4.1.4115.1.8.1.5.6.2.1.1.6 | Columnd5QamRFSigQCorrecteds | read-only | current | The value returns the accumulated count of corrected codewords for all previous scan periods since this counter was cleared. |
| 1.3.6.1.4.1.4115.1.8.1.5.6.2.1.1.7 | Columnd5QamRFSigQUncorrectables | read-only | current | The value returns the accumulated count of uncorrected codewords for all previous scan periods since this counter was cleared. |
| 1.3.6.1.4.1.4115.1.8.1.5.6.2.1.1.8 | Columnd5QamRFSigQSignalNoise | read-only | current | This value returns the Signal To Noise ratio measured during the last scan period. |
| 1.3.6.1.4.1.4115.1.8.1.5.99 | Noded5QamConformance | |||
| 1.3.6.1.4.1.4115.1.8.1.5.99.1 | Noded5QamObjectGroups | |||
| 1.3.6.1.4.1.4115.1.8.1.5.99.1.1 | Groupd5QamRFObjectGroup | current | The d5QamRF group of objects. | |
| 1.3.6.1.4.1.4115.1.8.1.5.99.1.2 | Groupd5QamStatObjectGroup | current | The d5QamStat group of objects. | |
| 1.3.6.1.4.1.4115.1.8.1.5.99.1.3 | Groupd5QamSpareObjectGroup | current | The d5QamSpare group of objects. | |
| 1.3.6.1.4.1.4115.1.8.1.5.99.1.4 | Groupd5QamDocsisObjectGroup | current | The d5Docsis group of objects. | |
| 1.3.6.1.4.1.4115.1.8.1.5.99.1.5 | Groupd5QamSnoopObjectGroup | current | The d5QamSnoop group of objects. | |
| 1.3.6.1.4.1.4115.1.8.1.5.99.1.6 | Groupd5QamRFSigQObjectGroup | current | The d5QamRFSignalQuality group of objects. | |
| 1.3.6.1.4.1.4115.1.8.1.5.99.2 | Noded5QamNotificationGroups | |||
| 1.3.6.1.4.1.4115.1.8.1.5.99.2.1 | Groupd5QamSpareGroupNotificationGroup | current | The d5QamSpare group of notifications. | |
| 1.3.6.1.4.1.4115.1.8.1.5.99.3 | Noded5QamCompliances | |||
| 1.3.6.1.4.1.4115.1.8.1.5.99.3.1 | Complianced5QamCompliance | current | The compliance statement for ARRIS-D5-QAM-MIB. |