CXAsyncIo-MIB
90 objects
No module-level DESCRIPTION found.
Imported Objects
| CXProduct-SMI | Alias cxAsyncIo |
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.44.1 | NodeasioPortStatusChange | Indicates that the associated hardware port has changed state. It has toggled between any of the states as defined in object asyStatOprPortState. | ||
| 1.3.6.1.4.1.495.2.1.6.44.1 | TableasioSapOprTable | not-accessible | mandatory | Contains configuration information about each Async driver SAP (service access point) and its associated hardware port. |
| 1.3.6.1.4.1.495.2.1.6.44.1.1 | RowasioSapOprEntry | not-accessible | mandatory | Contains configuration information for a specific Async driver SAP (service access point) and its associated hardware port. |
| 1.3.6.1.4.1.495.2.1.6.44.1.1.1 | ColumnasioSapOprNumber | read-only | mandatory | Indicates the table row containing configuration or monitoring objects for a SAP (service access point) associated with the slot and port for this card. Range … |
| 1.3.6.1.4.1.495.2.1.6.44.1.1.2 | ColumnasioSapOprAlias | read-only | mandatory | Determines the name which uniquely identifies the SAP (service access point). Range of Values: 1 to 16 alphanumeric characters starting with an alpha character… |
| 1.3.6.1.4.1.495.2.1.6.44.1.1.3 | ColumnasioSapOprPortSpeed | read-only | mandatory | Defines the input and output speed, in bits per second, for the associated hardware port. Any value between 50 and 115200 will be accepted. Note: 134.5 bit/s i… |
| 1.3.6.1.4.1.495.2.1.6.44.1.1.5 | ColumnasioSapOprPortCharacterSize | read-only | mandatory | Defines the character size, in number of bits, to be used on the associated hardware port. Options: 5,6, 7 or 8 Note: This value does not include the start, st… |
| 1.3.6.1.4.1.495.2.1.6.44.1.1.6 | ColumnasioSapOprPortStopBits | read-only | mandatory | Defines the number of stop bits to be used on the associated hardware port. Options: one (1 bit) one-point-five (1.5 bits) two (2 bits) Default Value: 1 bit |
| 1.3.6.1.4.1.495.2.1.6.44.1.1.7 | ColumnasioSapOprPortBreakLength | read-only | mandatory | Defines the number of break characters to be transmitted on the line when a reset is requested by the upper layer. A break is an all-zeroes character without a… |
| 1.3.6.1.4.1.495.2.1.6.44.1.1.8 | ColumnasioSapOprPortMaxQueueLength | read-write | mandatory | Defines the maximum transmitter queue length, in number of buffers. If more data requests are received from the upper layer after the queue has reached its max… |
| 1.3.6.1.4.1.495.2.1.6.44.1.1.9 | ColumnasioSapOprPortQueueUpperThreshold | read-write | mandatory | Defines the queue length, in number of buffers, after which the Async driver starts flow controlling the upper layer. After the queue has reached this length, … |
| 1.3.6.1.4.1.495.2.1.6.44.1.1.10 | ColumnasioSapOprPortQueueLowerThreshold | read-write | mandatory | Defines the queue length, in number of buffers, after which the Async driver stops flow controlling the upper layer. The value for this object should always be… |
| 1.3.6.1.4.1.495.2.1.6.44.1.1.11 | ColumnasioSapOprPortSignalDownTimer | read-only | mandatory | Defines the length of time, in seconds, after which the Async port will drop its signals when it has received a disconnect request from the upper layer. Range … |
| 1.3.6.1.4.1.495.2.1.6.44.1.1.12 | ColumnasioSapOprPortMaxTimeDelay | read-only | mandatory | Defines the maximum time, in milliseconds, the port must wait before processing received characters. Range of Values: 1 - 5 Default Value: 5 |
| 1.3.6.1.4.1.495.2.1.6.44.1.1.13 | ColumnasioSapOprPortMaxInterruptCharacters | read-write | obsolete | Obsolete. |
| 1.3.6.1.4.1.495.2.1.6.44.1.1.20 | ColumnasioSapOprPortSignalSamplingPeriod | read-write | mandatory | Determines the sampling period, in 100 millisecond increments, that the associated hardware port uses to sample detectable signals. Range of Values: 3 - 100 De… |
| 1.3.6.1.4.1.495.2.1.6.44.1.1.21 | ColumnasioSapOprPortDcdDtrSignalSamples | read-write | mandatory | Defines the number of samples of object asySapPortSignalSamplingPeriod that the associated hardware port must detect before validating the DCD (Data Carrier De… |
| 1.3.6.1.4.1.495.2.1.6.44.1.1.22 | ColumnasioSapOprPortCtsRtsSignalSamples | read-write | mandatory | Defines the number of samples of object asySapPortSignalSamplingPeriod that the associated hardware port must detect before validating the CTS (Clear To Send) … |
| 1.3.6.1.4.1.495.2.1.6.44.1.1.23 | ColumnasioSapOprPortDsrDrsSignalSamples | read-write | mandatory | Defines the number of samples of object asySapPortSignalSamplingPeriod that the associated hardware port must detect before validating the DRS (Data Rate Selec… |
| 1.3.6.1.4.1.495.2.1.6.44.1.1.24 | ColumnasioSapOprPortTmLlSignalSamples | read-write | mandatory | Defines the number of samples of object asySapPortSignalSamplingPeriod that the associated hardware port must detect before validating the TM (Test Mode) signa… |
| 1.3.6.1.4.1.495.2.1.6.44.1.1.25 | ColumnasioSapOprPortRiRlSignalSamples | read-write | mandatory | Defines the number of samples of object asySapPortSignalSamplingPeriod that the associated hardware port must detect before validating the RI (Ring Indicator)s… |
| 1.3.6.1.4.1.495.2.1.6.44.1.1.26 | ColumnasioSapOprPortStatisticsTimer | read-only | mandatory | Determines the period of time, in seconds, that is used to measure Async driver performance and collect statistics. Range of Values: 0 - 60. Default Value: 0 (… |
| 1.3.6.1.4.1.495.2.1.6.44.1.1.27 | ColumnasioSapOprPortCarrierAction | read-write | mandatory | Determines whether or not this SAP (service access point) will inform the associated upper layer SAP that service is no longer available because its associated… |
| 1.3.6.1.4.1.495.2.1.6.44.1.1.30 | ColumnasioOprPortTrap | read-write | mandatory | Indicates whether or not this SAP (service access point) produces the object asyPortStatusChange trap. Options: disabled (1) enabled (2) Default Value: disable… |
| 1.3.6.1.4.1.495.2.1.6.44.1.1.34 | ColumnasioOprControlLine | write-only | mandatory | Controls the state of the hardware port associated with the specified SAP (service access point). Options: forceDown (1) forceUp (2) forceReset (3) Configurati… |
| 1.3.6.1.4.1.495.2.1.6.44.1.1.35 | ColumnasioOprControlStats | write-only | mandatory | Controls the handling of statistics collected at the associated hardware port. Option: clearSAPStats (1) Configuration Changed: Operative only |
| 1.3.6.1.4.1.495.2.1.6.44.1.1.38 | ColumnasioStatOprPortType | read-only | mandatory | Identifies the hardware strapping used at the associated hardware port. Options: unknown (1) dte (2) dce (3) |
| 1.3.6.1.4.1.495.2.1.6.44.1.1.39 | ColumnasioStatOprPortInterfaceType | read-only | mandatory | Identifies the type of hardware interface needed for the associated hardware port. Options: unknown (1) rs232d |
| 1.3.6.1.4.1.495.2.1.6.44.1.1.40 | ColumnasioStatOprPortState | read-only | mandatory | Indicates the state of the associated hardware port. Options: portUp (1) portDown (2) portShutDown (3) portDownBadConfiguration (4) portOutOfOrder (5) |
| 1.3.6.1.4.1.495.2.1.6.44.1.1.45 | ColumnasioStatOprDCDState | read-only | mandatory | Indicates the current state (active- high or active-low) of the DCD (Data Carrier Detect) signal at the associated hardware port. Options: unknown (1) inactive… |
| 1.3.6.1.4.1.495.2.1.6.44.1.1.46 | ColumnasioStatOprDTRState | read-only | mandatory | Indicates the current state (active- high or active-low) of the DTR (Data Terminal Ready) signal at the associated hardware port. Options: unknown (1) inactive… |
| 1.3.6.1.4.1.495.2.1.6.44.1.1.47 | ColumnasioStatOprRTSState | read-only | mandatory | Indicates the current state (active- high or active-low) of the RTS (Request To Send) signal at the associated hardware port. Options: unknown (1) inactive (2)… |
| 1.3.6.1.4.1.495.2.1.6.44.1.1.48 | ColumnasioStatOprCTSState | read-only | mandatory | Indicates the current state (active- high or active-low) of the CTS (Clear To Send) signal at the associated hardware port. Options: unknown (1) inactive (2) a… |
| 1.3.6.1.4.1.495.2.1.6.44.1.1.49 | ColumnasioStatOprDSRState | read-only | mandatory | Indicates the current state (active- high or active-low) of the DSR (Data Set Ready) signal at the associated hardware port. Options: unknown (1) inactive (2) … |
| 1.3.6.1.4.1.495.2.1.6.44.1.1.50 | ColumnasioStatOprDRSState | read-only | mandatory | Indicates the current state (active- high or active-low) of the DRS (Data Rate Selection) signal at the associated hardware port. Options: unknown (1) inactive… |
| 1.3.6.1.4.1.495.2.1.6.44.1.1.51 | ColumnasioStatOprTMState | read-only | mandatory | Indicates the current state (active- high or active-low) of the TM (Test Mode) signal at the associated hardware port. Options: unknown (1) inactive (2) active… |
| 1.3.6.1.4.1.495.2.1.6.44.1.1.52 | ColumnasioStatOprLLState | read-only | mandatory | Indicates the current state (active- high or active-low) of the LL (Local Loopback) signal at the associated hardware port. Options: unknown (1) inactive (2) a… |
| 1.3.6.1.4.1.495.2.1.6.44.1.1.53 | ColumnasioStatOprRIState | read-only | mandatory | Indicates the current state (active- high or active-low) of the RI (Ring Indicator) signal at the associated hardware port. Options: unknown (1) inactive (2) a… |
| 1.3.6.1.4.1.495.2.1.6.44.1.1.54 | ColumnasioStatOprRLState | read-only | mandatory | Indicates the current state (active- high or active-low) of the RL (Remote Loopback) signal at the associated hardware port. Options: unknown (1) inactive (2) … |
| 1.3.6.1.4.1.495.2.1.6.44.1.1.59 | ColumnasioStatOprTxBps | read-only | mandatory | Indicates the number of bits per second that were transmitted during the sampling period entered in object asySapAdmPortStatisticsTimer. |
| 1.3.6.1.4.1.495.2.1.6.44.1.1.60 | ColumnasioStatOprRxBps | read-only | mandatory | Indicates the number of bits per second that were received during the sampling period entered in object asySapAdmPortStatisticsTimer. |
| 1.3.6.1.4.1.495.2.1.6.44.1.1.61 | ColumnasioStatOprTxBpsMax | read-only | mandatory | Indicates the maximum number of bits per second transmitted, since the statistics were last reset, during the sampling period entered in object asySapAdmPortSt… |
| 1.3.6.1.4.1.495.2.1.6.44.1.1.62 | ColumnasioStatOprRxBpsMax | read-only | mandatory | Indicates the maximum number of bits per second received, since the statistics were last reset, during the sampling period entered in object asySapAdmPortStati… |
| 1.3.6.1.4.1.495.2.1.6.44.1.1.63 | ColumnasioStatOprTxCharacters | read-only | mandatory | Indicates the number of characters transmitted from this port, since the statistics were last reset, during the sampling period entered in object asySapAdmPort… |
| 1.3.6.1.4.1.495.2.1.6.44.1.1.64 | ColumnasioStatOprTxBadStateDiscards | read-only | mandatory | Indicates the number of characters that were discarded at this SAP (service access point) since the last power-up. The characters were discarded as a result of… |
| 1.3.6.1.4.1.495.2.1.6.44.1.1.65 | ColumnasioStatOprTxResetDiscards | read-only | mandatory | Indicates the number of characters that were discarded at this SAP (service access point) since the last power-up as a result of a management requested line re… |
| 1.3.6.1.4.1.495.2.1.6.44.1.1.66 | ColumnasioStatOprTxSysCongestionDiscards | read-only | mandatory | Indicates the number of characters that were discarded at this SAP (service access point) since the last power-up as a result of system congestion, during the … |
| 1.3.6.1.4.1.495.2.1.6.44.1.1.72 | ColumnasioStatOprRxCharacters | read-only | mandatory | Indicates the number of characters that were received through this port since the statistics were last reset, during the sampling period entered in object asyS… |
| 1.3.6.1.4.1.495.2.1.6.44.1.1.73 | ColumnasioStatOprRxOverrunErrorCharacters | read-only | mandatory | Indicates the number of overrun error characters that were received by the associated hardware port since the last power-up, during the sampling period entered… |
| 1.3.6.1.4.1.495.2.1.6.44.1.1.74 | ColumnasioStatOprRxParityErrorCharacters | read-only | mandatory | Indicates the number of parity error characters that were received by the associated hardware port since the last power-up, during the sampling period entered … |
| 1.3.6.1.4.1.495.2.1.6.44.1.1.75 | ColumnasioStatOprRxFramingErrorCharacters | read-only | mandatory | Indicates the number of framing error characters that were received by the associated hardware port since the last power-up, during the sampling period entered… |
| 1.3.6.1.4.1.495.2.1.6.44.1.1.76 | ColumnasioStatOprRxNoiseErrorCharacters | read-only | mandatory | Indicates the number of noise error characters that were received by the associated hardware port since the last power-up, during the sampling period entered i… |
| 1.3.6.1.4.1.495.2.1.6.44.1.1.77 | ColumnasioStatOprRxBreakCharacters | read-only | mandatory | Indicates the number of break characters that were received by the associated hardware port since the last power-up, during the sampling period entered in obje… |
| 1.3.6.1.4.1.495.2.1.6.44.1.1.78 | ColumnasioStatOprRxBadStateDiscards | read-only | mandatory | Indicates the number of characters that were discarded at this SAP (service access point) since the last power-up. They were discarded as a result of a frame r… |
| 1.3.6.1.4.1.495.2.1.6.44.1.1.79 | ColumnasioStatOprRxBusyDiscards | read-only | mandatory | Indicates the number of characters that were discarded at this SAP (service access point) since the last power-up. They were discarded as a result of a busy co… |
| 1.3.6.1.4.1.495.2.1.6.44.1.1.85 | ColumnasioStatOprPortStateChanges | read-only | mandatory | Indicates the number of state transitions that have occurred at the associated hardware port since the last power-up, during the sampling period entered in obj… |
| 1.3.6.1.4.1.495.2.1.6.44.1.1.86 | ColumnasioStatOprDCDStateChanges | read-only | mandatory | Indicates the number of DCD (Data Carrier Detect) state transitions that have occurred at the associated hardware port since the last power-up, during the samp… |
| 1.3.6.1.4.1.495.2.1.6.44.1.1.87 | ColumnasioStatOprDTRStateChanges | read-only | mandatory | Indicates the number of DTR (Data Terminal Ready) state transitions that have occurred at the associated hardware port since the last power-up, during the samp… |
| 1.3.6.1.4.1.495.2.1.6.44.1.1.88 | ColumnasioStatOprRTSStateChanges | read-only | mandatory | Indicates the number of RTS (Request To Send) state transitions that have occurred at the associated hardware port since the last power-up, during the sampling… |
| 1.3.6.1.4.1.495.2.1.6.44.1.1.89 | ColumnasioStatOprCTSStateChanges | read-only | mandatory | Indicates the number of CTS (Clear To Send) state transitions that have occurred at the associated hardware port since the last power-up, during the sampling p… |
| 1.3.6.1.4.1.495.2.1.6.44.1.1.90 | ColumnasioStatOprDSRStateChanges | read-only | mandatory | Indicates the number of DSR (Data Set Ready) state transitions that have occurred at the associated hardware port since the last power-up, during the sampling … |
| 1.3.6.1.4.1.495.2.1.6.44.1.1.91 | ColumnasioStatOprDRSStateChanges | read-only | mandatory | Indicates the number of DRS (Data Rate Selector) state transitions that have occurred at the associated hardware port since the last power-up, during the sampl… |
| 1.3.6.1.4.1.495.2.1.6.44.1.1.92 | ColumnasioStatOprTMStateChanges | read-only | mandatory | Indicates the number of TM (Test Mode) state transitions that have occurred at the associated hardware port since the last power-up, during the sampling period… |
| 1.3.6.1.4.1.495.2.1.6.44.1.1.93 | ColumnasioStatOprLLStateChanges | read-only | mandatory | Indicates the number of LL (Local Loopback) state transitions that have occurred at the associated hardware port since the last power-up, during the sampling p… |
| 1.3.6.1.4.1.495.2.1.6.44.1.1.94 | ColumnasioStatOprRIStateChanges | read-only | mandatory | Indicates the number of RI (Ring Indicator) state transitions that have occurred at the associated hardware port since the last power-up, during the sampling p… |
| 1.3.6.1.4.1.495.2.1.6.44.1.1.95 | ColumnasioStatOprRLStateChanges | read-only | mandatory | Indicates the number of RL (Remote Loopback) state transitions that have occurred at the associated hardware port since the last power-up, during the sampling … |
| 1.3.6.1.4.1.495.2.1.6.44.1.1.96 | ColumnasioStatOprPortResets | read-only | mandatory | Indicates the number of port resets that have occurred at the associated hardware port since the last power-up, during the sampling period entered in object as… |
| 1.3.6.1.4.1.495.2.1.6.44.2 | TableasioSapAdmTable | not-accessible | mandatory | Contains the planned configuration information for each Async driver SAP (service access point) and its associated hardware port. |
| 1.3.6.1.4.1.495.2.1.6.44.2.1 | RowasioSapAdmEntry | not-accessible | mandatory | Contains the planned configuration information for a specific Async driver SAP (service access point) and its associated hardware port. |
| 1.3.6.1.4.1.495.2.1.6.44.2.1.1 | ColumnasioSapAdmNumber | read-only | mandatory | Indicates the table row containing configuration or monitoring objects for a SAP (service access point) associated with the slot and a port for this card. Rang… |
| 1.3.6.1.4.1.495.2.1.6.44.2.1.2 | ColumnasioSapAdmAlias | read-write | mandatory | Determines the name which uniquely identifies the SAP (service access point). Range of Values: 1 to 16 alphanumeric characters beginning with an alpha characte… |
| 1.3.6.1.4.1.495.2.1.6.44.2.1.3 | ColumnasioSapAdmPortSpeed | read-write | mandatory | Defines the input and output speed, in bits per second, for the associated hardware port. Any value between 50 and 115200 will be accepted. Note: 134.5 bit/s i… |
| 1.3.6.1.4.1.495.2.1.6.44.2.1.5 | ColumnasioSapAdmPortCharacterSize | read-write | mandatory | Defines the character size, in number of bits, to be used on the associated hardware port. Options: 5, 6, 7 or 8 Note: This value does not include the start, s… |
| 1.3.6.1.4.1.495.2.1.6.44.2.1.6 | ColumnasioSapAdmPortStopBits | read-write | mandatory | Defines the number of stop bits to be used on the associated hardware port. Options: one (1 bit) one-point-five (1.5 bits) two (2 bits) Default Value: 1 bit Co… |
| 1.3.6.1.4.1.495.2.1.6.44.2.1.7 | ColumnasioSapAdmPortBreakLength | read-write | mandatory | Defines the number of break characters to be transmitted on the line when a reset is requested by the upper layer. A break is an all-zeroes character without a… |
| 1.3.6.1.4.1.495.2.1.6.44.2.1.8 | ColumnasioSapAdmPortMaxQueueLength | read-write | mandatory | Defines the maximum transmitter queue length, in number of buffers. If more data requests are received from the upper layer after the queue has reached its max… |
| 1.3.6.1.4.1.495.2.1.6.44.2.1.9 | ColumnasioSapAdmPortQueueUpperThreshold | read-write | mandatory | Defines the queue length, in number of buffers, after which the Async driver starts flow controlling the upper layer. After the queue has reached this length, … |
| 1.3.6.1.4.1.495.2.1.6.44.2.1.10 | ColumnasioSapAdmPortQueueLowerThreshold | read-write | mandatory | Defines the queue length, in number of buffers, after which the Async driver stops flow controlling the upper layer. The value for this object should always be… |
| 1.3.6.1.4.1.495.2.1.6.44.2.1.11 | ColumnasioSapAdmPortSignalDownTimer | read-write | mandatory | Defines the length of time, in seconds, after which the Async port will drop its signals when it has received a disconnect request from the upper layer. Range … |
| 1.3.6.1.4.1.495.2.1.6.44.2.1.12 | ColumnasioSapAdmPortMaxTimeDelay | read-write | mandatory | Defines the maximum time, in milliseconds, the port must wait before processing received characters. Range of Values: 1 - 5 Default Value: 5 Configuration Chan… |
| 1.3.6.1.4.1.495.2.1.6.44.2.1.13 | ColumnasioSapAdmPortMaxInterruptCharacters | read-write | obsolete | Obsolete. |
| 1.3.6.1.4.1.495.2.1.6.44.2.1.20 | ColumnasioSapAdmPortSignalSamplingPeriod | read-write | mandatory | Determines the sampling period, in 100 millisecond increments, that the associated hardware port uses to sample detectable signals. Range of Values: 3 - 100 De… |
| 1.3.6.1.4.1.495.2.1.6.44.2.1.21 | ColumnasioSapAdmPortDcdDtrSignalSamples | read-write | mandatory | Defines the number of samples of object asySapPortSignalSamplingPeriod that the associated hardware port must detect before validating the DCD (Data Carrier De… |
| 1.3.6.1.4.1.495.2.1.6.44.2.1.22 | ColumnasioSapAdmPortCtsRtsSignalSamples | read-write | mandatory | Defines the number of samples of object asySapPortSignalSamplingPeriod that the associated hardware port must detect before validating the CTS (Clear To Send) … |
| 1.3.6.1.4.1.495.2.1.6.44.2.1.23 | ColumnasioSapAdmPortDsrDrsSignalSamples | read-write | mandatory | Defines the number of samples of object asySapPortSignalSamplingPeriod that the associated hardware port must detect before validating the DRS (Data Rate Selec… |
| 1.3.6.1.4.1.495.2.1.6.44.2.1.24 | ColumnasioSapAdmPortTmLlSignalSamples | read-write | mandatory | Defines the number of samples of object asySapPortSignalSamplingPeriod that the associated hardware port must detect before validating the TM (Test Mode) signa… |
| 1.3.6.1.4.1.495.2.1.6.44.2.1.25 | ColumnasioSapAdmPortRiRlSignalSamples | read-write | mandatory | Defines the number of samples of object asySapPortSignalSamplingPeriod that the associated hardware port must detect before validating the RI (Ring Indicator)s… |
| 1.3.6.1.4.1.495.2.1.6.44.2.1.26 | ColumnasioSapAdmPortStatisticsTimer | read-write | mandatory | Determines the period of time, in seconds, that is used to measure Async driver performance and collect statistics. Range of Values: 0 - 60. Default Value: 0 =… |
| 1.3.6.1.4.1.495.2.1.6.44.2.1.27 | ColumnasioSapAdmPortCarrierAction | read-write | mandatory | Determines whether or not this SAP (service access point) will inform the associated upper layer SAP that service is no longer available because its associated… |
| 1.3.6.1.4.1.495.2.1.6.44.2.1.30 | ColumnasioAdmPortTrap | read-write | mandatory | Indicates whether on not this SAP (service access point) produces the asyPortStatusChange trap. Options: disabled (1) enabled (2) Default Value: disabled Confi… |