CXAtmPhy-MIB
44 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.61.1 | ScalaratmPhyMibLevel | read-only | mandatory | Used to determine current MIB module release supported by agent. Object is in decimal. |
| 1.3.6.1.4.1.495.2.1.6.61.10 | TableatmPhyInterfaceConfTable | not-accessible | mandatory | A table containing information pertaining to one ATM PHY interface. |
| 1.3.6.1.4.1.495.2.1.6.61.10.1 | RowatmPhyInterfaceConfEntry | not-accessible | mandatory | Defines an entry in the ATM PHY interface table. |
| 1.3.6.1.4.1.495.2.1.6.61.10.1.1 | ColumnatmPhyConfTxClocking | read-write | mandatory | Defines how the physical line's transmit clock will be derived. For DS1 and E1 ATM implementations, this object defines the interface clocking, and the corresp… |
| 1.3.6.1.4.1.495.2.1.6.61.10.1.2 | ColumnatmPhyConfRxLoopback | read-write | mandatory | Defines the type of loopback mode. Options: none (1): Normal operating mode. All received cells are sent to the ATM layer. line (2): All received cells are re-… |
| 1.3.6.1.4.1.495.2.1.6.61.10.1.3 | ColumnatmPhyConfFrameFormat | read-write | mandatory | Defines the type of framing used at this interface. Options: g-804 (1): ATM direct cell mapping as per ITU Recommendation G.804. plcp (2): ATM Physical Layer C… |
| 1.3.6.1.4.1.495.2.1.6.61.10.1.4 | ColumnatmPhyConfPlcpBypass | read-write | mandatory | Defines whether all internal FIFOs are bypassed when this interface is configured for the PLCP framing format (object atmPhyConfFrameFormat value 'atmPlcp'). F… |
| 1.3.6.1.4.1.495.2.1.6.61.10.1.5 | ColumnatmPhyConfTxCoset | read-write | mandatory | Defines whether the coset polynomial is applied to the HCS octet of transmitted cells. If 'enabled', the polynomial X^6+X^4+X^2+1 is added to the HCS octet of … |
| 1.3.6.1.4.1.495.2.1.6.61.10.1.6 | ColumnatmPhyConfRxCoset | read-write | mandatory | Defines whether the coset polynomial is applied to the HCS octet of received cells before comparisons. If 'enabled', the polynomial X^6+X^4+X^2+1 is removed fr… |
| 1.3.6.1.4.1.495.2.1.6.61.10.1.7 | ColumnatmPhyConfCellScrambling | read-write | mandatory | Defines whether the cell payload scrambling is applied to transmitted cells at this interface. If 'enabled', cell payloads are scrambled using the self synchro… |
| 1.3.6.1.4.1.495.2.1.6.61.10.1.8 | ColumnatmPhyConfCellDescrambling | read-write | mandatory | Defines whether received cell payloads are descrambled. If 'enabled', received cell payloads are descrambled using the self synchronizing polynomial X^43+1. If… |
| 1.3.6.1.4.1.495.2.1.6.61.10.1.9 | ColumnatmPhyConfTxFifoDepth | read-write | mandatory | Defines the size of the transmit FIFO in cells. Reducing the FIFO depth permits cell latencies to be minimized at this interface (through the PHY device). It i… |
| 1.3.6.1.4.1.495.2.1.6.61.10.1.20 | ColumnatmPhyConfRxUserProgH1Mask | read-write | mandatory | Defines the bit mask pattern for the first octet (H1) of a received cell. For each mask bit that is set, the PHY will process received cells with the correspon… |
| 1.3.6.1.4.1.495.2.1.6.61.10.1.21 | ColumnatmPhyConfRxUserProgH2Mask | read-write | mandatory | Defines the bit mask pattern for the second octet (H2) of a received cell. For each mask bit that is set, the PHY will process received cells with the correspo… |
| 1.3.6.1.4.1.495.2.1.6.61.10.1.22 | ColumnatmPhyConfRxUserProgH3Mask | read-write | mandatory | Defines the bit mask pattern for the third octet (H3) of a received cell. For each mask bit that is set, the PHY will process received cells with the correspon… |
| 1.3.6.1.4.1.495.2.1.6.61.10.1.23 | ColumnatmPhyConfRxUserProgH4Mask | read-write | mandatory | Defines the bit mask pattern for the third octet (H4) of a received cell. For each mask bit that is set, the PHY will process received cells with the correspon… |
| 1.3.6.1.4.1.495.2.1.6.61.10.1.24 | ColumnatmPhyConfTxIdleUnassignedCellPayload | read-write | mandatory | Defines the pattern inserted in the idle/unassigned cell payload. Idle/unassigned cells are inserted at this interface when the PHY device detects that the tra… |
| 1.3.6.1.4.1.495.2.1.6.61.10.1.25 | ColumnatmPhyConfPlcpControlTimer | read-write | mandatory | Defines the duration, in milliseconds, permitted for PCLP error generation controls specified by object 'atmPhyConfPlcpControl'. |
| 1.3.6.1.4.1.495.2.1.6.61.10.1.40 | ColumnatmPhyConfControl | read-write | mandatory | Defines the generic controls permitted at this interface. Interface. Options: none (1): The value returned following a 'clearStats' command. clearStats (2): Cl… |
| 1.3.6.1.4.1.495.2.1.6.61.10.1.45 | ColumnatmPhyConfPlcpControl | read-write | mandatory | Defines the PLCP error generation controls permitted at this interface. This object is bit-mapped and can permit a maximum of 8 simultaneous error controls. On… |
| 1.3.6.1.4.1.495.2.1.6.61.20 | TableatmPhyOperTable | not-accessible | mandatory | A table containing operational information and controls pertaining to one ATM PHY interface. |
| 1.3.6.1.4.1.495.2.1.6.61.20.1 | RowatmPhyOperEntry | not-accessible | mandatory | Defines an entry in the ATM PHY operational table. |
| 1.3.6.1.4.1.495.2.1.6.61.20.1.10 | ColumnatmPhyOperDeviceVersion | read-only | mandatory | Identifies the version level of the S/UNI-PDH. The second version of the device should return value 1. |
| 1.3.6.1.4.1.495.2.1.6.61.20.1.11 | ColumnatmPhyOperFramerDetected | read-only | mandatory | Identifies the actual hardware framer detected. Only framers on ATM cards are detectable. |
| 1.3.6.1.4.1.495.2.1.6.61.20.1.12 | ColumnatmPhyOperState | read-only | mandatory | Identifies the current state of the interface. Options: offline(1): Configuration for this interface has not yet been passed to the layer. downNoHwDetected (2)… |
| 1.3.6.1.4.1.495.2.1.6.61.20.1.13 | ColumnatmPhyOperLCDState | read-only | mandatory | Identifies the current cell delineation state of the interface, and only applies to an interface configured to used the direct mapping frame format (object atm… |
| 1.3.6.1.4.1.495.2.1.6.61.20.1.20 | ColumnatmPhyOperRxIdleUnassignedCellsDropped | read-only | mandatory | Indicates the number of idle/unassigned cells that have been dropped at this interface since the last power-up reset, or, since the statistics were last cleare… |
| 1.3.6.1.4.1.495.2.1.6.61.20.1.21 | ColumnatmPhyOperHCSErrors | read-only | mandatory | Indicates the number of header check sequence (HCS) errors that have been detected at this interface since the last power-up reset, or, since the statistics we… |
| 1.3.6.1.4.1.495.2.1.6.61.20.1.22 | ColumnatmPhyOperOCDEvents | read-only | mandatory | Indicates the number of Out of Cell Delineation (OCD) events that have been detected at this interface since the last power-up reset, or, since the statistics … |
| 1.3.6.1.4.1.495.2.1.6.61.20.1.23 | ColumnatmPhyOperRxFifoOverruns | read-only | mandatory | Indicates the number of receive FIFO overruns that have been detected at this interface since the last power-up reset, or, since the statistics were last clear… |
| 1.3.6.1.4.1.495.2.1.6.61.20.1.24 | ColumnatmPhyOperTxFifoOverruns | read-only | mandatory | Indicates the number of transmit FIFO overruns that have been detected at this interface since the last power-up reset, or, since the statistics were last clea… |
| 1.3.6.1.4.1.495.2.1.6.61.30 | TableatmPhyOperPlcpTable | not-accessible | mandatory | A table containing additional operational information and controls pertaining to one ATM PHY interface configured for PLCP mapping. |
| 1.3.6.1.4.1.495.2.1.6.61.30.1 | RowatmPhyOperPlcpEntry | not-accessible | mandatory | Defines an entry in the ATM PHY operational table for PLCP configured interfaces. |
| 1.3.6.1.4.1.495.2.1.6.61.30.1.10 | ColumnatmPhyOperPlcpOOFDefectState | read-only | mandatory | Indicates the current PLCP Out Of Frame (OOF) defect state at this interface. An OOF is declared when an error is detected in both the A1 and A2 octets or when… |
| 1.3.6.1.4.1.495.2.1.6.61.30.1.11 | ColumnatmPhyOperPlcpLOFDefectState | read-only | mandatory | Indicates the current PLCP Loss Of Frame (LOF) defect state at this interface. An LOF is declared when an OOF state persists for more than 25ms for DS1, or 20m… |
| 1.3.6.1.4.1.495.2.1.6.61.30.1.12 | ColumnatmPhyOperPlcpYADefectState | read-only | mandatory | Indicates the current PLCP Yellow Alarm (YA) defect state at this interface. A Yellow Alarm is declared when 10 consecutive yellow signal bits are set to logic… |
| 1.3.6.1.4.1.495.2.1.6.61.30.1.20 | ColumnatmPhyOperPlcpOOFs | read-only | mandatory | Indicates the number of PLCP Out of Frame (OOF) defects detected or removed at this interface since the last power-up reset, or, since the statistics were last… |
| 1.3.6.1.4.1.495.2.1.6.61.30.1.21 | ColumnatmPhyOperPlcpLOFs | read-only | mandatory | Indicates the number of PLCP Loss of Frame (LOF) defects detected or removed at this interface since the last power-up reset, or, since the statistics were las… |
| 1.3.6.1.4.1.495.2.1.6.61.30.1.22 | ColumnatmPhyOperPlcpYAs | read-only | mandatory | Indicates the number of PLCP Yellow Alarm (YA) defects detected or removed at this interface since the last power-up reset, or, since the statistics were last … |
| 1.3.6.1.4.1.495.2.1.6.61.30.1.23 | ColumnatmPhyOperPlcpBIPErrors | read-only | mandatory | Indicates the number of PLCP Bit Interleaved Parity (BIP) errors that have been detected at this interface since the last power-up reset, or, since the statist… |
| 1.3.6.1.4.1.495.2.1.6.61.30.1.24 | ColumnatmPhyOperPlcpFramingErrors | read-only | mandatory | Indicates the number of PLCP framing pattern octet errors and path overhead identification octet errors that have been detected at this interface since the las… |
| 1.3.6.1.4.1.495.2.1.6.61.30.1.25 | ColumnatmPhyOperPlcpFEBEErrors | read-only | mandatory | Indicates the number of PLCP Far End Block Errors (FEBE) that have been detected at this interface since the last power-up reset, or, since the statistics were… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| ErrorState | INTEGER { errorNotDetected (1), errorDetected (2) } | ||
| Switch | INTEGER { disabled (1), enabled (2) } |