CXBsc-MIB
93 objects
No module-level DESCRIPTION found.
Imported Objects
| CXProduct-SMI | Alias cxBsc SapIndex |
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter TimeTicks |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.56.10 | TablebscSapTable | not-accessible | mandatory | A table containing configuration information about all the service access point. |
| 1.3.6.1.4.1.495.2.1.6.56.10.1 | RowbscSapEntry | not-accessible | mandatory | The parameters for a particular service access point. |
| 1.3.6.1.4.1.495.2.1.6.56.10.1.1 | ColumnbscSapNumber | read-only | mandatory | Identifies the service access point by a numerical value. This value is used as a index in the saps table. Values are unique per service access point. |
| 1.3.6.1.4.1.495.2.1.6.56.10.1.2 | ColumnbscSapRowStatus | read-write | mandatory | Indicates whether the particular service access point is configured within the MIB. Service access point entries (rows) may be created by setting this object v… |
| 1.3.6.1.4.1.495.2.1.6.56.10.1.3 | ColumnbscSapType | read-write | mandatory | Identifies the service access point by type:'lower' identifies a SAP leading to a physical BSC port. 'Upper' identifies a SAP acting as an internal inter-layer… |
| 1.3.6.1.4.1.495.2.1.6.56.10.1.4 | ColumnbscSapInterfaceType | read-write | mandatory | Identifies the type of controller: either TIU or HIU. |
| 1.3.6.1.4.1.495.2.1.6.56.10.1.5 | ColumnbscSapAlias | read-write | mandatory | Identifies the service access point by a textual name. Names are unique per service access point. |
| 1.3.6.1.4.1.495.2.1.6.56.10.1.6 | ColumnbscSapCompanionAlias | read-write | mandatory | Identifies the `lower' service access point that will communicate with this service access point by a textual name. Names are unique per service access point. … |
| 1.3.6.1.4.1.495.2.1.6.56.10.1.7 | ColumnbscSapSnalcRef | read-write | mandatory | Identifies which upper sap is associated to the lower sap within the BSC module. Applies only to lower BSC saps. |
| 1.3.6.1.4.1.495.2.1.6.56.10.1.8 | ColumnbscPollIntAfterAckTimer | read-write | mandatory | This object applies only to a service access point functioning as a TIU. Determines the length of time allowed to elapse between the reception of an acknowledg… |
| 1.3.6.1.4.1.495.2.1.6.56.10.1.20 | ColumnbscSapControl | write-only | mandatory | Control associated with the specified service access point. |
| 1.3.6.1.4.1.495.2.1.6.56.10.1.30 | ColumnbscSapOperationalMode | read-only | mandatory | Identifies the service access point as being active or non-active with the new configuration. |
| 1.3.6.1.4.1.495.2.1.6.56.10.1.31 | ColumnbscSapLinkStatus | read-only | mandatory | Indicates the physical status of the sap with respect to its associated cop. |
| 1.3.6.1.4.1.495.2.1.6.56.10.1.40 | ColumnbscSapLinkChange | read-only | mandatory | Indicates the number of times the physical link has been brought up. |
| 1.3.6.1.4.1.495.2.1.6.56.10.1.41 | ColumnbscSapOverrun | read-only | mandatory | Identifies the number of block overrun's received by this sap. |
| 1.3.6.1.4.1.495.2.1.6.56.10.1.42 | ColumnbscSapParityError | read-only | mandatory | Identifies the number of blocks received with parity errors. |
| 1.3.6.1.4.1.495.2.1.6.56.10.1.43 | ColumnbscSapCrcError | read-only | mandatory | Identifies the number of blocks with CRC errors. |
| 1.3.6.1.4.1.495.2.1.6.56.10.1.44 | ColumnbscSapBlockReject | read-only | mandatory | Identifies the number of blocks received whose frame size is greater than that configured. |
| 1.3.6.1.4.1.495.2.1.6.56.11 | TablebscCuTable | not-accessible | mandatory | A table containing configuration information about all the 3270 controller units. |
| 1.3.6.1.4.1.495.2.1.6.56.11.1 | RowbscCuEntry | not-accessible | mandatory | The parameters for a particular controller unit. |
| 1.3.6.1.4.1.495.2.1.6.56.11.1.1 | ColumnbscCuSapNumber | read-only | mandatory | Identifies the sap associated with this controller unit. Each controller unit has an address and the address has to be unique with one sap. However, the addres… |
| 1.3.6.1.4.1.495.2.1.6.56.11.1.2 | ColumnbscCuNumber | read-only | mandatory | Identifies the address of this controller unit. The address has to be unique for a specified sap. |
| 1.3.6.1.4.1.495.2.1.6.56.11.1.3 | ColumnbscCuRowStatus | read-write | mandatory | Indicates whether the particular service access point is configured within the MIB. Controller unit entries (rows) may be created by setting this object value … |
| 1.3.6.1.4.1.495.2.1.6.56.11.1.4 | ColumnbscCuHwdType | read-write | mandatory | Identifies the controller unit type. |
| 1.3.6.1.4.1.495.2.1.6.56.11.1.5 | ColumnbscCuMaxBlockLength | read-write | mandatory | Identifies the maximal length of the blocks exchanged between the host/terminal and the BSC module. The value is measured in octets and is specified by the BSC… |
| 1.3.6.1.4.1.495.2.1.6.56.11.1.6 | ColumnbscCuPollTimeout | read-write | mandatory | Identifies the number of seconds a station waits for an answer. The value is measured in tenth of seconds. |
| 1.3.6.1.4.1.495.2.1.6.56.11.1.7 | ColumnbscCuDelayTimer | read-write | mandatory | Identifies the number of seconds the emulated station may delay the sending of a block. Timer is in tenth of seconds. |
| 1.3.6.1.4.1.495.2.1.6.56.11.1.8 | ColumnbscCuRetryCounter | read-write | mandatory | Identifies the number of retries are executed, before a command fails. It is used by the host/terminal and the BSC layer. |
| 1.3.6.1.4.1.495.2.1.6.56.11.1.9 | ColumnbscCuETBAck | read-write | mandatory | Identifies if the acknowledgement is local or end to end for ETBs. The ETB is a trailer block delimitator.. The 'endToEnd' means each block is acknowledged to … |
| 1.3.6.1.4.1.495.2.1.6.56.11.1.10 | ColumnbscCuETXAck | read-write | mandatory | Identifies if the acknowledgement is local or end to end for ETXs. The ETX is a trailer command delimitator.. The 'endToEnd' means the command is acknowledged … |
| 1.3.6.1.4.1.495.2.1.6.56.11.1.20 | ColumnbscCuControl | write-only | mandatory | Control associated with the specified service access point. |
| 1.3.6.1.4.1.495.2.1.6.56.11.1.30 | ColumnbscCuOperationalMode | read-only | mandatory | Identifies the service access point as being active or non-active with the new configuration. |
| 1.3.6.1.4.1.495.2.1.6.56.11.1.31 | ColumnbscCuConnectionStatus | read-only | mandatory | Indicates the X25 connection status of this link. |
| 1.3.6.1.4.1.495.2.1.6.56.11.1.45 | ColumnbscCuConnectRequest | read-only | mandatory | Number of connection requests coming from the upper SNALC layer. |
| 1.3.6.1.4.1.495.2.1.6.56.11.1.46 | ColumnbscCuDisconnectRequest | read-only | mandatory | Number of disconnection requests coming from the upper SNALC layer. |
| 1.3.6.1.4.1.495.2.1.6.56.11.1.47 | ColumnbscCuDisconnectIndication | read-only | mandatory | Number of disconnections sent to the upper SNALC layer. |
| 1.3.6.1.4.1.495.2.1.6.56.11.1.48 | ColumnbscCuEndToEndConnectCnf | read-only | mandatory | Number of end-to-end connections seen by the controller. Message sent by the Snalc. |
| 1.3.6.1.4.1.495.2.1.6.56.11.1.49 | ColumnbscCuSnalcRxRnr | read-only | mandatory | Number of RNR 's received from the SNALC module due to X.25 or LLC2 flow control. |
| 1.3.6.1.4.1.495.2.1.6.56.11.1.50 | ColumnbscCuSnalcRxRr | read-only | mandatory | Number of RR 's received from the SNALC module due to X.25 or LLC2 flow control. |
| 1.3.6.1.4.1.495.2.1.6.56.12 | TablebscDevTable | not-accessible | mandatory | A table containing configuration information about all the devices controlled by this module. |
| 1.3.6.1.4.1.495.2.1.6.56.12.1 | RowbscDevEntry | not-accessible | mandatory | The parameters for a particular controller unit. |
| 1.3.6.1.4.1.495.2.1.6.56.12.1.1 | ColumnbscDevSapNumber | read-only | mandatory | Identifies the sap to which this device is attached. |
| 1.3.6.1.4.1.495.2.1.6.56.12.1.2 | ColumnbscDevCuNumber | read-only | mandatory | Identifies the address of the controller unit to which this device is attached. |
| 1.3.6.1.4.1.495.2.1.6.56.12.1.3 | ColumnbscDevNumber | read-only | mandatory | Identifies the address of this device. The address has to be unique for a specified for a controller unit. |
| 1.3.6.1.4.1.495.2.1.6.56.12.1.4 | ColumnbscDevRowStatus | read-write | mandatory | Indicates whether the particular service access point is configured within the MIB. Controller unit entries (rows) may be created by setting this object value … |
| 1.3.6.1.4.1.495.2.1.6.56.12.1.5 | ColumnbscDevType | read-write | mandatory | Indicates whether the device is a printer or a display. |
| 1.3.6.1.4.1.495.2.1.6.56.12.1.20 | ColumnbscDevControl | write-only | mandatory | Control associated with the specified service access point. |
| 1.3.6.1.4.1.495.2.1.6.56.12.1.30 | ColumnbscDevOperationalMode | read-only | mandatory | Identifies the device as being active or non-active with the new configuration. |
| 1.3.6.1.4.1.495.2.1.6.56.12.1.31 | ColumnbscDevConnectionStatus | read-only | mandatory | Indicates the current status of the device's logical connection with regard to the network. |
| 1.3.6.1.4.1.495.2.1.6.56.12.1.32 | ColumnbscDevState | read-only | mandatory | Indicates the state of this link. |
| 1.3.6.1.4.1.495.2.1.6.56.12.1.33 | ColumnbscDevSSDeviceBusy | read-only | mandatory | The current bit information found in the last status sense message received/transmitted. |
| 1.3.6.1.4.1.495.2.1.6.56.12.1.34 | ColumnbscDevSSUnitSpecify | read-only | mandatory | The current bit information found in the last status sense message received/transmitted. |
| 1.3.6.1.4.1.495.2.1.6.56.12.1.35 | ColumnbscDevSSDeviceEnd | read-only | mandatory | The current bit information found in the last status sense message received/transmitted. |
| 1.3.6.1.4.1.495.2.1.6.56.12.1.36 | ColumnbscDevSSTransmissionCheck | read-only | mandatory | The current bit information found in the last status sense message received/transmitted. |
| 1.3.6.1.4.1.495.2.1.6.56.12.1.37 | ColumnbscDevSSCommandReject | read-only | mandatory | The current bit information found in the last status sense message received/transmitted. |
| 1.3.6.1.4.1.495.2.1.6.56.12.1.38 | ColumnbscDevSSInterventionRequired | read-only | mandatory | The current bit information found in the last status sense message received/transmitted. |
| 1.3.6.1.4.1.495.2.1.6.56.12.1.39 | ColumnbscDevSSEquipmentCheck | read-only | mandatory | The current bit information found in the last status sense message received/transmitted. |
| 1.3.6.1.4.1.495.2.1.6.56.12.1.40 | ColumnbscDevSSDataCheck | read-only | mandatory | The current bit information found in the last status sense message received/transmitted. |
| 1.3.6.1.4.1.495.2.1.6.56.12.1.41 | ColumnbscDevSSControlCheck | read-only | mandatory | The current bit information found in the last status sense message received/transmitted. |
| 1.3.6.1.4.1.495.2.1.6.56.12.1.42 | ColumnbscDevSSOperationCheck | read-only | mandatory | The current bit information found in the last status sense message received/transmitted. |
| 1.3.6.1.4.1.495.2.1.6.56.12.1.60 | ColumnbscDevGeneralPoll | read-only | mandatory | Number of general polls transmitted/received. |
| 1.3.6.1.4.1.495.2.1.6.56.12.1.61 | ColumnbscDevSpecificPoll | read-only | mandatory | Number of specific polls transmitted/received. |
| 1.3.6.1.4.1.495.2.1.6.56.12.1.62 | ColumnbscDevDeviceSelection | read-only | mandatory | Number of device selections transmitted/received. |
| 1.3.6.1.4.1.495.2.1.6.56.12.1.63 | ColumnbscDevTestRequest | read-only | mandatory | Number of test request messages received. |
| 1.3.6.1.4.1.495.2.1.6.56.12.1.64 | ColumnbscDevHostWrite | read-only | mandatory | Number of host initiated write commands. |
| 1.3.6.1.4.1.495.2.1.6.56.12.1.65 | ColumnbscDevHostRead | read-only | mandatory | Number of host initiated read commands which need a direct response. |
| 1.3.6.1.4.1.495.2.1.6.56.12.1.66 | ColumnbscDevHostControl | read-only | mandatory | Number of host initiated control commands. |
| 1.3.6.1.4.1.495.2.1.6.56.12.1.67 | ColumnbscDevCuShortRead | read-only | mandatory | Number of controller initiated short read commands. |
| 1.3.6.1.4.1.495.2.1.6.56.12.1.68 | ColumnbscDevTxBlocks | read-only | mandatory | Identifies the number of blocks transmited by this controller unit. |
| 1.3.6.1.4.1.495.2.1.6.56.12.1.69 | ColumnbscDevRxBlocks | read-only | mandatory | Identifies the number of blocks received by this controller unit. |
| 1.3.6.1.4.1.495.2.1.6.56.12.1.70 | ColumnbscDevStatusSense | read-only | mandatory | Identifies the number of status/sense messages received by the device. |
| 1.3.6.1.4.1.495.2.1.6.56.12.1.71 | ColumnbscDevError | read-only | mandatory | Identifies the number of blocks in errors (other than BCC) received by this controller unit. |
| 1.3.6.1.4.1.495.2.1.6.56.12.1.72 | ColumnbscDevErrTimeout | read-only | mandatory | Identifies the number of timeouts for this controller unit. |
| 1.3.6.1.4.1.495.2.1.6.56.12.1.73 | ColumnbscDevCircuitEnable | read-only | mandatory | Number of device connection requests (or enable) coming from the DSP module through the upper SNALC layer. |
| 1.3.6.1.4.1.495.2.1.6.56.12.1.74 | ColumnbscDevCircuitDisconnect | read-only | mandatory | Number of device disconnection requests (or disable) coming from the DSP module through the upper SNALC layer. |
| 1.3.6.1.4.1.495.2.1.6.56.12.1.75 | ColumnbscDevCircuitRequest | read-only | mandatory | Number of circuit requests sent (TIU) or received (HIU) to/from the DSP module through the upper SNALC layer. |
| 1.3.6.1.4.1.495.2.1.6.56.12.1.76 | ColumnbscDevTxCommands | read-only | mandatory | Number of complete commands transmitted to the host or controller/device. |
| 1.3.6.1.4.1.495.2.1.6.56.12.1.77 | ColumnbscDevRxCommands | read-only | mandatory | Number of complete commands received from the host or controller/device. |
| 1.3.6.1.4.1.495.2.1.6.56.12.1.78 | ColumnbscDevCommandsQueued | read-only | mandatory | Number of commands queued. |
| 1.3.6.1.4.1.495.2.1.6.56.12.1.79 | ColumnbscDevBlocksQueued | read-only | mandatory | Number of blocks queued. |
| 1.3.6.1.4.1.495.2.1.6.56.12.1.80 | ColumnbscDevTxRvi | read-only | mandatory | Number of transmitted RVI's to the host. (HIU). |
| 1.3.6.1.4.1.495.2.1.6.56.12.1.81 | ColumnbscDevRxRvi | read-only | mandatory | Number of received RVI's from the controller/device. |
| 1.3.6.1.4.1.495.2.1.6.56.12.1.82 | ColumnbscDevTxTtd | read-only | mandatory | Number of transmitted text delays, TTD, to the controller/device.(TIU) |
| 1.3.6.1.4.1.495.2.1.6.56.12.1.83 | ColumnbscDevRxTtd | read-only | mandatory | Number of received text delay's, TTD, from the host.(HIU) |
| 1.3.6.1.4.1.495.2.1.6.56.12.1.84 | ColumnbscDevTxWack | read-only | mandatory | Number of transmitted WACK's to the host.(HIU). |
| 1.3.6.1.4.1.495.2.1.6.56.12.1.85 | ColumnbscDevRxWack | read-only | mandatory | Number of recieved WACK's from the controller/device. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| BscAckMode | INTEGER { endToEnd (1), local (2) } | ||
| BscBlockSize | INTEGER { block128 (1), block256 (2), block512 (3), block1k (4), block2k (5), block3000 (6), block5k (7) } | ||
| BscCuIndex | INTEGER (0..64) | ||
| BscDevIndex | INTEGER (0..127) | ||
| BscOperationalMode | INTEGER { offline (1), online (2) } | ||
| BscRowStatus | INTEGER { invalid (1), valid (2) } | ||
| BscStatusSense | INTEGER { notSet (1), isSet (2) } |