CXCFG-IPX-MIB
28 objects
No module-level DESCRIPTION found.
Imported Objects
| CXProduct-SMI | Alias cxIpx |
| RFC-1212 | OBJECT-TYPE |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.13.1 | NodecxCfgIpx | |||
| 1.3.6.1.4.1.495.2.1.6.13.1.1 | ScalarcxCfgIpxNumClockTicksPerSecond | read-write | mandatory | Identifies the number of clock ticks per second. Range of Values: None Default Value: The value is always 1 |
| 1.3.6.1.4.1.495.2.1.6.13.1.2 | TablecxCfgIpxPortTable | not-accessible | mandatory | Provides configuration information for each IPX port. The table contains three default entries (rows); each row corresponds to a particular IPX port. Some of t… |
| 1.3.6.1.4.1.495.2.1.6.13.1.2.1 | RowcxCfgIpxPortEntry | not-accessible | mandatory | Provides configuration information for a particular IPX port. Some of the parameters can be modified. |
| 1.3.6.1.4.1.495.2.1.6.13.1.2.1.1 | ColumncxCfgIpxPort | read-only | mandatory | Identifies the number of the IPX Port. The number is used as local index for this and the ipxStatsTable. Range of Values: From 1 to 32 Default Value: None Note… |
| 1.3.6.1.4.1.495.2.1.6.13.1.2.1.2 | ColumncxCfgIpxPortIfIndex | read-only | mandatory | Identifies the table row that contains configuration or monitoring objects for a specific type of physical interface. Range of Values: From 1 to the number of … |
| 1.3.6.1.4.1.495.2.1.6.13.1.2.1.3 | ColumncxCfgIpxPortSubnetworkSAPAlias | read-write | mandatory | Determines the name which uniquely defines the cxCfgIpxPortSubnetworkSap. Range of Values: 0 to 16 alphanumeric characters. The first character must be a lette… |
| 1.3.6.1.4.1.495.2.1.6.13.1.2.1.4 | ColumncxCfgIpxPortState | read-write | mandatory | Determines the initialization state of the IPX port. Options: on (1): The port is active, transmission is possible. off (2): The port is inactive, transmission… |
| 1.3.6.1.4.1.495.2.1.6.13.1.2.1.5 | ColumncxCfgIpxPortRowStatus | read-write | mandatory | Determines the status of the objects in a table row. Options: valid (1): Values are enabled. invalid (2): Row is flagged, after next reset the values will be d… |
| 1.3.6.1.4.1.495.2.1.6.13.1.2.1.6 | ColumncxCfgIpxPortTransportTime | read-write | mandatory | Determines the transport time, in clock ticks, for LAN or WAN links. This value is set to 1 for LAN links. WAN links may have a value of 1 or higher. One clock… |
| 1.3.6.1.4.1.495.2.1.6.13.1.2.1.7 | ColumncxCfgIpxPortMaxHops | read-write | mandatory | Determines the maximum number of hops a packet may take before it is discarded. Range of Values: From 1 to 16 Default Value: 16 Configuration Changed: Administ… |
| 1.3.6.1.4.1.495.2.1.6.13.1.2.1.8 | ColumncxCfgIpxPortIntNetNum | read-write | mandatory | Determines the IPX internal network number associated with the port. The number must be entered as 8 hexadecimal characters, for example 0xAB12CD34. The x must… |
| 1.3.6.1.4.1.495.2.1.6.13.1.2.1.9 | ColumncxCfgIpxPortPerSapBcast | read-write | mandatory | Determines whether periodic SAP broadcasting is active. Options: On (1): SAP broadcasting is active, and the router sends periodic SAP broadcasts to advertise … |
| 1.3.6.1.4.1.495.2.1.6.13.1.2.1.10 | ColumncxCfgIpxPortPerRipBcast | read-write | mandatory | Determines whether periodic RIP broadcasting is active. Options: on (1): RIP broadcasting is active, and the router sends periodic RIP broadcasts to advertise … |
| 1.3.6.1.4.1.495.2.1.6.13.1.2.1.11 | ColumncxCfgIpxPortSapBcast | read-write | mandatory | Determines whether the port sends a SAP broadcast in response to a SAP query sent by another router. Options: on (1): The port will respond to SAP queries. off… |
| 1.3.6.1.4.1.495.2.1.6.13.1.2.1.12 | ColumncxCfgIpxPortRipBcast | read-write | mandatory | Determines whether the port sends a RIP broadcast in response to a RIP query sent by another router. When the value is set to on, the port responds to RIP quer… |
| 1.3.6.1.4.1.495.2.1.6.13.1.2.1.13 | ColumncxCfgIpxPortDiagPackets | read-write | mandatory | Determines whether the IPX port will respond to diagnostic packets. Options: On (1): The port will respond, and will transmit a diagnostic response packet. Off… |
| 1.3.6.1.4.1.495.2.1.6.13.1.2.1.14 | ColumncxCfgIpxPortPerRipTxTimer | read-write | mandatory | Determines the length of time, in seconds, between periodic RIP broadcasts. Range of Values: From 1 to 3600 Default Value: 60 Configuration Changed: Administra… |
| 1.3.6.1.4.1.495.2.1.6.13.1.2.1.15 | ColumncxCfgIpxPortPerSapTxTimer | read-write | mandatory | Determines the length of time, in seconds, between periodic SAP broadcasts. Range of Values: From 1 to 3600 Default Value: 60 Configuration Changed: Administra… |
| 1.3.6.1.4.1.495.2.1.6.13.1.2.1.16 | ColumncxCfgIpxPortRipAgeTimer | read-write | mandatory | Determines the length of time, in seconds, that an entry can remain in the IPX port's RIP table without being updated. When the value (number of seconds) expir… |
| 1.3.6.1.4.1.495.2.1.6.13.1.2.1.17 | ColumncxCfgIpxPortSapAgeTimer | read-write | mandatory | Determines the length of time (aging), in seconds, that an entry can remain in the IPX port's SAP table without being updated. When the value (number of second… |
| 1.3.6.1.4.1.495.2.1.6.13.1.2.1.18 | ColumncxCfgIpxPortFrameType | read-write | mandatory | Determines which type of framing is used for IPX header information. Framing refers to the way the header information is formatted. The format is determined by… |
| 1.3.6.1.4.1.495.2.1.6.13.1.2.1.19 | ColumncxCfgIpxPortWatchSpoof | read-write | mandatory | Determines whether IPX Watchdog Spoofing is enabled (on). IPX Watchdog Spoofing is a software technique that limits the number of IPX Watchdog frames that are … |
| 1.3.6.1.4.1.495.2.1.6.13.1.2.1.20 | ColumncxCfgIpxPortSpxWatchSpoof | read-write | mandatory | Determines whether SPX Watchdog Spoofing is enabled (on). SPX Watchdog Spoofing is a software technique that limits the number of SPX Watchdog frames that are … |
| 1.3.6.1.4.1.495.2.1.6.13.1.2.1.21 | ColumncxCfgIpxPortSerialSpoof | read-write | mandatory | Determines whether Serialization Spoofing is (enabled) on. Serialization Spoofing is a software technique that limits the number of Serialization frames (they … |
| 1.3.6.1.4.1.495.2.1.6.13.1.2.1.22 | ColumncxCfgIpxPortSRSupport | read-write | mandatory | Determines whether the port should support Source Routing packet. If it is enabled, the physical infterface of the port must be Token-Ring. If it is disabled, … |
| 1.3.6.1.4.1.495.2.1.6.13.1.20 | ScalarcxCfgIpxMibLevel | read-only | mandatory | Used to determine current MIB module release supported by the agent. Object is in decimal. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| NetNumber | OCTET STRING(SIZE(4)) |