CXDSP-MIB
79 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.57.1 | TabledspSapTable | not-accessible | mandatory | A table containing configuration information about all the service access point. |
| 1.3.6.1.4.1.495.2.1.6.57.1.1 | RowdspSapEntry | not-accessible | mandatory | The parameters for a particular service access point. |
| 1.3.6.1.4.1.495.2.1.6.57.1.1.1 | ColumndspSapNumber | read-only | mandatory | Identifies the service access point by a numerical value. This value is used as a index in the saps table. Values are unique per service access point. |
| 1.3.6.1.4.1.495.2.1.6.57.1.1.2 | ColumndspSapRowStatus | read-write | mandatory | Indicates whether the particular service access point is configured within the MIB Service access point entries (rows) may be created by setting this object va… |
| 1.3.6.1.4.1.495.2.1.6.57.1.1.3 | ColumndspSapType | read-write | mandatory | Identifies the service access point by type:'lower' identifies a SAP leading to a physical X25 port. 'Upper' identifies a SAP acting as an internal inter-layer… |
| 1.3.6.1.4.1.495.2.1.6.57.1.1.4 | ColumndspSapAlias | read-write | mandatory | Identifies the service access point by a textual name. Names are unique per service access point. |
| 1.3.6.1.4.1.495.2.1.6.57.1.1.5 | ColumndspSapCompanionAlias | read-write | mandatory | Identifies the `lower' service access point that will communicate with this service access point by a textual name. Names are unique per service access point. … |
| 1.3.6.1.4.1.495.2.1.6.57.1.1.6 | ColumndspSapSnalcRef | read-write | mandatory | Identifies which upper sap is associated to the lower sap within the DSP module. Applies only to lower DSP saps (X25 sap). |
| 1.3.6.1.4.1.495.2.1.6.57.1.1.7 | ColumndspSapEbcdicAsciiMode | read-write | mandatory | Indicates the character set used by the device defined for this association. The character set could be a EBCDIC or ASCII. |
| 1.3.6.1.4.1.495.2.1.6.57.1.1.20 | ColumndspSapControl | write-only | mandatory | Control associated with the specified service access point. |
| 1.3.6.1.4.1.495.2.1.6.57.1.1.30 | ColumndspSapOperationalMode | read-only | mandatory | Identifies the service access point as being active or non-active with the new configuration. |
| 1.3.6.1.4.1.495.2.1.6.57.2 | TabledspCuTable | not-accessible | mandatory | A table containing configuration information about all the 3270 controller units. |
| 1.3.6.1.4.1.495.2.1.6.57.2.1 | RowdspCuEntry | not-accessible | mandatory | The parameters for a particular controller unit. |
| 1.3.6.1.4.1.495.2.1.6.57.2.1.1 | ColumndspCuSapNumber | read-only | mandatory | Identifies the sap associated with this controller unit. Each controller unit has an address and the address has to be unique with one sap. However, the addres… |
| 1.3.6.1.4.1.495.2.1.6.57.2.1.2 | ColumndspCuAddress | read-only | mandatory | Identifies the address of this controller unit. The address has to be unique for a specified sap. |
| 1.3.6.1.4.1.495.2.1.6.57.2.1.3 | ColumndspCuRowStatus | read-write | mandatory | Indicates whether the particular service access point is configured within the MIB. Controller unit entries (rows) may be created by setting this object value … |
| 1.3.6.1.4.1.495.2.1.6.57.2.1.4 | ColumndspCuType | read-write | mandatory | Identifies the type of controller: either TIU or HIU. |
| 1.3.6.1.4.1.495.2.1.6.57.2.1.5 | ColumndspCuCallingX25Address | read-write | mandatory | Identifies the X25 address of this sap. This address is unique for all devices attached to this sap, TIU side |
| 1.3.6.1.4.1.495.2.1.6.57.2.1.6 | ColumndspCuCalledX25Address | read-write | mandatory | Identifies the X25 address of the remote device. |
| 1.3.6.1.4.1.495.2.1.6.57.2.1.8 | ColumndspCuDSPCircuitType | read-write | mandatory | Identifies the connection as being either only one connection or multiple DSP connections per X.25 virtual circuit The valid values follow: singUsr-NoReq Circ … |
| 1.3.6.1.4.1.495.2.1.6.57.2.1.9 | ColumndspCuWindow | read-write | mandatory | Defines the receive window size used for packets. At the source side, it defines the window for packets received from the source interface. At the destination … |
| 1.3.6.1.4.1.495.2.1.6.57.2.1.10 | ColumndspCuUserData | read-write | mandatory | The user data put in the call user data field of call request packets. |
| 1.3.6.1.4.1.495.2.1.6.57.2.1.11 | ColumndspCuFacility | read-write | mandatory | Specifies the facility codes and facility parameters put in the facilities field of the call call request packet during call set-up. The maximum number of faci… |
| 1.3.6.1.4.1.495.2.1.6.57.2.1.12 | ColumndspCuApplicationId | read-write | mandatory | Indicates an application running on the host associated with the controller unit/device. |
| 1.3.6.1.4.1.495.2.1.6.57.2.1.13 | ColumndspCuReqMode | read-only | mandatory | Identifies the connection request mode. The following modes are available : Fixed Class Crm : destination is selected automatically Specific Class Crm : select… |
| 1.3.6.1.4.1.495.2.1.6.57.2.1.14 | ColumndspCuPacketSize | read-write | mandatory | The receive and transmit packet size. |
| 1.3.6.1.4.1.495.2.1.6.57.2.1.15 | ColumndspCuThroughput | read-write | mandatory | The receive and transmit throughput class across the line. |
| 1.3.6.1.4.1.495.2.1.6.57.2.1.16 | ColumndspCuPartner | read-write | mandatory | This object identifies the knowledge DSP has about its BSC partner layer and applies to the controllers acting as Terminal Interface. In normal conditions, the… |
| 1.3.6.1.4.1.495.2.1.6.57.2.1.25 | ColumndspCuControl | write-only | mandatory | Control associated with the specified service access point. |
| 1.3.6.1.4.1.495.2.1.6.57.2.1.30 | ColumndspCuState | read-only | mandatory | Control associated with the specified service access point. |
| 1.3.6.1.4.1.495.2.1.6.57.2.1.31 | ColumndspCuOperationalMode | read-only | mandatory | Identifies the controller unit as being active or non-active with the new configuration. |
| 1.3.6.1.4.1.495.2.1.6.57.2.1.40 | ColumndspCuX25CallRequest | read-only | mandatory | Identifies the number of X25 Call Request packets received by this controller. |
| 1.3.6.1.4.1.495.2.1.6.57.2.1.41 | ColumndspCuX25CallAccept | read-only | mandatory | Identifies the number of X25 Call Accept packets received by this controller. |
| 1.3.6.1.4.1.495.2.1.6.57.2.1.42 | ColumndspCuClears | read-only | mandatory | Identifies the number of Clear Request received from the SNALC layer. |
| 1.3.6.1.4.1.495.2.1.6.57.2.1.43 | ColumndspCuClearsInd | read-only | mandatory | Identifies the number of Clear Indications sent to the SNALC layer. |
| 1.3.6.1.4.1.495.2.1.6.57.2.1.44 | ColumndspCuInvToClear | read-only | mandatory | Identifies the number of INVITATION TO CLEAR packets received by this controller. |
| 1.3.6.1.4.1.495.2.1.6.57.3 | TabledspDevTable | not-accessible | mandatory | A table containing configuration information about all the devices controlled by this module. |
| 1.3.6.1.4.1.495.2.1.6.57.3.1 | RowdspDevEntry | not-accessible | mandatory | The parameters for a particular controller unit. |
| 1.3.6.1.4.1.495.2.1.6.57.3.1.1 | ColumndspDevSapNumber | read-only | mandatory | Identifies the sap to which this device is attached to. |
| 1.3.6.1.4.1.495.2.1.6.57.3.1.2 | ColumndspDevCuAddress | read-only | mandatory | Identifies the address of the controller unit to which this device is attached. |
| 1.3.6.1.4.1.495.2.1.6.57.3.1.3 | ColumndspDevAddress | read-only | mandatory | Identifies the address of this device. The address has to be unique for a specified for a controller unit. |
| 1.3.6.1.4.1.495.2.1.6.57.3.1.4 | ColumndspDevRowStatus | read-write | mandatory | Indicates whether the particular service access point is configured within the MIB. Controller unit entries (rows) may be created by setting this object value … |
| 1.3.6.1.4.1.495.2.1.6.57.3.1.5 | ColumndspDevUCN | read-only | mandatory | Identifies a specific connection. |
| 1.3.6.1.4.1.495.2.1.6.57.3.1.6 | ColumndspDevRemoteCuAddress | read-write | mandatory | Identifies the address of remote controller unit to which this device is connected. This object is set to 0 if no connection is established. |
| 1.3.6.1.4.1.495.2.1.6.57.3.1.7 | ColumndspDevRemoteDevAddress | read-write | mandatory | Identifies the address of remote controller unit to which this device is connected. This object is set to 0 if no connection is established. |
| 1.3.6.1.4.1.495.2.1.6.57.3.1.8 | ColumndspDevFormatSize | read-write | mandatory | Describes the number of characters suported by the device. |
| 1.3.6.1.4.1.495.2.1.6.57.3.1.9 | ColumndspDevAttPrnt | read-write | mandatory | Identifies wheather the device has a printer attached. The device could be a display in order to have a printer attached. |
| 1.3.6.1.4.1.495.2.1.6.57.3.1.10 | ColumndspDevCharSet | read-write | mandatory | Identifies the support of different character sets. |
| 1.3.6.1.4.1.495.2.1.6.57.3.1.11 | ColumndspDevColour | read-write | mandatory | Identifies wheather the device supports colours. |
| 1.3.6.1.4.1.495.2.1.6.57.3.1.12 | ColumndspDevTTextSupport | read-write | mandatory | Identifies whether it the device supports transparent text. |
| 1.3.6.1.4.1.495.2.1.6.57.3.1.13 | ColumndspDevDPmode | read-write | mandatory | Identifies wheather the device is a display or printer. |
| 1.3.6.1.4.1.495.2.1.6.57.3.1.20 | ColumndspDevControl | write-only | mandatory | Control associated with the specified service access point. |
| 1.3.6.1.4.1.495.2.1.6.57.3.1.30 | ColumndspDevOperationalMode | read-only | mandatory | Identifies the controller unit as being active or non-active with the new configuration. |
| 1.3.6.1.4.1.495.2.1.6.57.3.1.31 | ColumndspDevState | read-only | mandatory | Indicates the state of the conection. The state 'invalid' means there is no connection. The state 'conected' means the connection is established. |
| 1.3.6.1.4.1.495.2.1.6.57.3.1.32 | ColumndspDevStatus | read-only | mandatory | This object contains the 'Status' byte, defined by the BSC protocol for 3270 controller unit family. This object and the 'bscDevSense ' contain the result of t… |
| 1.3.6.1.4.1.495.2.1.6.57.3.1.33 | ColumndspDevSense | read-only | mandatory | This object contains the 'Sense' byte, defined by the BSC protocol for 3270 controller unit family. This object and the 'bscDevSense ' contain the result of th… |
| 1.3.6.1.4.1.495.2.1.6.57.3.1.41 | ColumndspDevCommand | read-only | mandatory | Identifies the number of COMAMND packets sent/received by the device. Only the host sends the COMMAND packets. The host DSP counts the number of packets sent. … |
| 1.3.6.1.4.1.495.2.1.6.57.3.1.42 | ColumndspDevResponse | read-only | mandatory | Identifies the number of RESPONSE packets sent/received by the device. Only the termianl sends RESPONSE packets. The host DSP counts the number of packets rece… |
| 1.3.6.1.4.1.495.2.1.6.57.3.1.43 | ColumndspDevCmdRspUndel | read-only | mandatory | Identifies the number of COMAMND/RESPONSE UNDELIVERED packets. This object notifies how many packets were rejected by this device. The host DSP counts the numb… |
| 1.3.6.1.4.1.495.2.1.6.57.3.1.44 | ColumndspDevCmdRspUndelReason | read-only | mandatory | This object keeps the error code of the last COMAMND/RESPONSE UNDELIVERED packet received. When conected to another Memotec device, only the 'wack' reason code… |
| 1.3.6.1.4.1.495.2.1.6.57.3.1.45 | ColumndspDevCmdRspAbort | read-only | mandatory | Identifies the number of COMAMND/RESPONSE ABORTED packets. This object notifies how many packets were aborted by this device. The host DSP counts the number of… |
| 1.3.6.1.4.1.495.2.1.6.57.3.1.46 | ColumndspDevCmdRspAbortReason | read-only | mandatory | This object keeps the error code of the last COMAMND/RESPONSE ABORTED packet received. When conected to another Memotec device, all the abort cases are managed… |
| 1.3.6.1.4.1.495.2.1.6.57.3.1.47 | ColumndspDevStatStatus | read-only | mandatory | Identifies the number of STATUS packets sent/received. Only the terminal sends this packet. The terminal DSP counts the number of packets sent. The host DSP co… |
| 1.3.6.1.4.1.495.2.1.6.57.3.1.48 | ColumndspDevAck | read-only | mandatory | Identifies the number of ACK packets sent by the device. Both host and terminal DSPs can sent ACK packets. |
| 1.3.6.1.4.1.495.2.1.6.57.3.1.49 | ColumndspDevInvToClear | read-only | mandatory | Identifies the number of INVITATION TO CLEAR packets received by the device. |
| 1.3.6.1.4.1.495.2.1.6.57.3.1.50 | ColumndspDevInvClearReason | read-only | mandatory | This object keeps the error code of the last COMAMND/RESPONSE ABORTED packet received. |
| 1.3.6.1.4.1.495.2.1.6.57.3.1.51 | ColumndspDevReset | read-only | mandatory | Identifies the number of RESET packets received by the device. |
| 1.3.6.1.4.1.495.2.1.6.57.3.1.52 | ColumndspDevResetReason | read-only | mandatory | This object keeps the error code of the last RESET packet received.. |
| 1.3.6.1.4.1.495.2.1.6.57.3.1.53 | ColumndspDevCircuitEnabled | read-only | mandatory | Identifies the number of CIRCUIT ENABLED packets received by the device. |
| 1.3.6.1.4.1.495.2.1.6.57.3.1.54 | ColumndspDevCircuitRequest | read-only | mandatory | Identifies the number of CIRCUIT REQUEST packets received by the device. |
| 1.3.6.1.4.1.495.2.1.6.57.3.1.55 | ColumndspDevCircuitDisconnect | read-only | mandatory | Identifies the number of DISCONNECT packets received by the device. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| DspCircuitType | INTEGER { singusr-noreqcirc (1), singusr-reqcirc (2), multuser-reqcirc (3), mes-usr-reqcirc (4) } | ||
| DspCuAddress | INTEGER (1..254) | ||
| DspDevAddress | INTEGER (1..254) | ||
| DspOperationalMode | INTEGER { offline (1), online (2) } | ||
| DspPartner | INTEGER { terminal-terminal (1), host-terminal (2) } | ||
| DspRowStatus | INTEGER { invalid (1), valid (2) } | ||
| PacketSize | INTEGER { bytes16 (4), bytes32 (5), bytes64 (6), bytes128 (7), bytes256 (8), bytes512 (9), bytes1024 (10), bytes2048 (11), bytes4096 (12) } | ||
| ThruputClass | INTEGER { bps75 (3), bps150 (4), bps300 (5), bps600 (6), bps1200 (7), bps2400 (8), bps4800 (9), bps9600 (10), bps19200 (11), bps38400 (12), bps64000 (13) } |