CXFrameRelayInterfaceModule-MIB
52 objects
No module-level DESCRIPTION found.
Imported Objects
| CXFrameRelay-MIB | DLCI |
| CXProduct-SMI | -- Proprietary frame relay interface MIB cxFrameRelayInterfaceModule Alias SapIndex |
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter TimeTicks |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.2.1 | ScalarfrimSRConnectInterval | read-write | mandatory | Determines the number of seconds to wait before attempting to re-establish a broken connection on a particular system route. Range of Values: 1 - 65, 535 Defau… |
| 1.3.6.1.4.1.495.2.1.6.2.2 | ScalarfrimServiceCost | read-write | mandatory | Determines the cost of Frame Relay service to be registered in the CX 1000's Inter-Application software layer. Range of Values: 0 - 65, 535 Default Value: 10 C… |
| 1.3.6.1.4.1.495.2.1.6.2.3 | TablefrimSapTable | not-accessible | mandatory | A table containing configuration and statistical information about each frame relay interface module service access point. |
| 1.3.6.1.4.1.495.2.1.6.2.3.1 | RowfrimSapEntry | not-accessible | mandatory | The parameters for a particular frame relay module service access point. |
| 1.3.6.1.4.1.495.2.1.6.2.3.1.1 | ColumnfrimSapId | read-only | mandatory | Indicates the row containing objects for configuring (or monitoring) a SAP associated either with the SAP in the Inter-Application software or with the SAP in … |
| 1.3.6.1.4.1.495.2.1.6.2.3.1.2 | ColumnfrimSapRowStatus | read-write | mandatory | Determines whether this SAP is to be removed from service (i.e. invalidated) within the FRIM software layer. Options: invalid (1): Row is deleted from the tabl… |
| 1.3.6.1.4.1.495.2.1.6.2.3.1.3 | ColumnfrimSapType | read-write | mandatory | Determines this SAP's type. Options: lower (1): SAP is a lower type (leads to the Frame Relay software layer) upper (2): SAP is an upper type (leads to the Int… |
| 1.3.6.1.4.1.495.2.1.6.2.3.1.4 | ColumnfrimSapAlias | read-write | mandatory | Determines the textual name uniquely identifying this SAP. Range of Values: CX1000: 0 - 35 alphanumeric characters beginning with a non-numeric character CX900… |
| 1.3.6.1.4.1.495.2.1.6.2.3.1.5 | ColumnfrimSapCompanionAlias | read-write | mandatory | Determines the textual name identifying the companion SAP either in the Inter-Application software layer or the Frame Relay software layer that will communicat… |
| 1.3.6.1.4.1.495.2.1.6.2.3.1.6 | ColumnfrimSapMaxDlcis | read-write | mandatory | Determines the maximum number of virtual circuits allowed for this SAP. This object is meaningful only if 'frimSapType' for this SAP is set to 'lower'. Range o… |
| 1.3.6.1.4.1.495.2.1.6.2.3.1.7 | ColumnfrimSapMaxErrorFrames | read-write | mandatory | Determines the number of frames having FECN and/or BECN bits set that can be received within the total number of frames defined in 'frimSapMonitorFrames' befor… |
| 1.3.6.1.4.1.495.2.1.6.2.3.1.8 | ColumnfrimSapMonitorFrames | read-write | mandatory | Determines the total number of frames that will be monitored at any one time for frames having the FECN and/or BECN bits set. It also defines how many frames m… |
| 1.3.6.1.4.1.495.2.1.6.2.3.1.9 | ColumnfrimSapFrWindowSize | read-write | mandatory | Indicates the maximum number of outstanding data buffers supported by this SAP. This object is meaningful only if 'frimSapType' for this SAP is set to 'lower'.… |
| 1.3.6.1.4.1.495.2.1.6.2.3.1.19 | ColumnfrimSapControlStats | write-only | mandatory | Controls the handling of statistics for this SAP. Options: clearSapStats: clears all statistics at this SAP Default Value: none Configuration Changed: operative |
| 1.3.6.1.4.1.495.2.1.6.2.3.1.20 | ColumnfrimSapstatRxDataFrames | read-only | mandatory | Indicates the number of data frames that have been received at this SAP across all virtual circuits since the last power-up. Range of Values: 0 - 4, 294, 967, … |
| 1.3.6.1.4.1.495.2.1.6.2.3.1.21 | ColumnfrimSapstatRxDataOctets | read-only | mandatory | Indicates the number of data octets that have been received at this SAP across all virtual circuits since the last power-up. Range of Values: 0 - 4, 294, 967, … |
| 1.3.6.1.4.1.495.2.1.6.2.3.1.22 | ColumnfrimSapstatTxDataFrames | read-only | mandatory | Indicates the number of data frames that have been sent from this SAP across all virtual circuits since the last power-up. Range of Values: 0 - 4, 294, 967, 29… |
| 1.3.6.1.4.1.495.2.1.6.2.3.1.23 | ColumnfrimSapstatTxDataOctets | read-only | mandatory | Indicates the number of data octets that have been sent from this SAP across all virtual circuits since the last power-up. Range of Values: 0 - 4, 294, 967, 29… |
| 1.3.6.1.4.1.495.2.1.6.2.3.1.24 | ColumnfrimSapstatUnopenedServiceDiscards | read-only | mandatory | Indicates the number of data frames that have been discarded at this SAP since the last power-up because the status of the PVC used by this SAP was inactive. R… |
| 1.3.6.1.4.1.495.2.1.6.2.3.1.25 | ColumnfrimSapstatPvcDownDiscards | read-only | mandatory | Indicates the number of received data frames that have been discarded at this SAP since the last power-up due to failure of the PVC associated with this SAP. T… |
| 1.3.6.1.4.1.495.2.1.6.2.3.1.26 | ColumnfrimSapstatUserSuccessfulOpens | read-only | mandatory | Indicates the number of services that have been opened at this SAP since the last power-up. This object is meaningful only if 'frimSapType' for this SAP is set… |
| 1.3.6.1.4.1.495.2.1.6.2.3.1.27 | ColumnfrimSapstatUserUnsuccessfulOpens | read-only | mandatory | Indicates the number of times the FRIM software layer was unable to open a service for a user. This object is meaningful only if 'frimSapType' for this SAP is … |
| 1.3.6.1.4.1.495.2.1.6.2.3.1.28 | ColumnfrimSapstatSRSuccessfulConnects | read-only | mandatory | Indicates the number of system route connections that have been established at this SAP since the last power-up. This object is meaningful only if 'frimSapType… |
| 1.3.6.1.4.1.495.2.1.6.2.3.1.29 | ColumnfrimSapstatSRUnsuccessfulConnects | read-only | mandatory | Indicates the number of times the FRIM software layer attempted but failed to establish a system route connection between two Frame Relay service providers. Th… |
| 1.3.6.1.4.1.495.2.1.6.2.3.1.30 | ColumnfrimSapstatTxResets | read-only | mandatory | Indicates the number of resets that the FRIM software layer has generated at this SAP since the last power-up. This object is meaningful only if 'frimSapType' … |
| 1.3.6.1.4.1.495.2.1.6.2.3.1.31 | ColumnfrimSapstatRxBECN | read-only | mandatory | Indicates the number of data frames received with the BECN bit set at this SAP since the last power-up. This object is meaningful only if 'frimSapType' for thi… |
| 1.3.6.1.4.1.495.2.1.6.2.3.1.32 | ColumnfrimSapstatRxFECN | read-only | mandatory | Indicates the number of data frames received with the FECN bit set at this SAP since the last power-up. This object is meaningful only if 'frimSapType' for thi… |
| 1.3.6.1.4.1.495.2.1.6.2.5 | TablefrimSysConTable | not-accessible | mandatory | A table containing information about current connections through the FRIM. |
| 1.3.6.1.4.1.495.2.1.6.2.5.1 | RowfrimSysConEntry | not-accessible | mandatory | The information for a particular connection through the FRIM. |
| 1.3.6.1.4.1.495.2.1.6.2.5.1.1 | ColumnfrimSysConSapId | read-only | mandatory | Indicates the 'frpCircuitSapNumber' of the lower SAP in the Frame Relay software layer through which a virtual circuit has been created and a connection has be… |
| 1.3.6.1.4.1.495.2.1.6.2.5.1.2 | ColumnfrimSysConDlci | read-only | mandatory | Indicates the virtual circuit's DLCI (Data Link Connection Identifier) for a particular SAP. Range of Values: 1 - 1,007 Default Value: none |
| 1.3.6.1.4.1.495.2.1.6.2.5.1.3 | ColumnfrimSysConPid | read-only | mandatory | Indicates the protocol used in the current connection on the virtual circuit. Options: pidFr (1): Frame Relay pidLan (2): LAN pidX25 (3): X.25 pidCcm (4): Comm… |
| 1.3.6.1.4.1.495.2.1.6.2.5.1.4 | ColumnfrimSysConRef | read-only | mandatory | Indicates the reference that one user's segment of traffic has been assigned on the outbound PVC to distinguish it from traffic segments of other users of the … |
| 1.3.6.1.4.1.495.2.1.6.2.5.1.5 | ColumnfrimSysConRemoteSlot | read-only | mandatory | Indicates the physical slot of the card in the local device that is receiving Frame Relay service. Range of Values: 1 - 16 Default Value: none |
| 1.3.6.1.4.1.495.2.1.6.2.5.1.6 | ColumnfrimSysConCreationTime | read-only | mandatory | Indicates the system clock's time at which this connection was created. Range of Values: system-generated Default Value: none |
| 1.3.6.1.4.1.495.2.1.6.2.5.1.7 | ColumnfrimSysConReqDataSize | read-only | mandatory | Indicates the data size of a frame requested at connection. If the request comes from another module in the local device, the application on that module determ… |
| 1.3.6.1.4.1.495.2.1.6.2.5.1.8 | ColumnfrimSysConNegDataSize | read-only | mandatory | Indicates the data size of a frame negotiated at connection when the requested size cannot be accommodated. If the requested size can be accommodated, the requ… |
| 1.3.6.1.4.1.495.2.1.6.2.5.1.9 | ColumnfrimSysConNegSizeExceededFrames | read-only | mandatory | Indicates the number of frames passing across the connection that have exceeded the negotiated data size. Range of Values: 0 - 4, 294, 967, 295 Default Value: … |
| 1.3.6.1.4.1.495.2.1.6.2.5.1.10 | ColumnfrimSysConRefRangeEnd | read-only | mandatory | Indicates the upper limit of a range of identifiers that different users' traffic segments on the same outbound PVC can use to remain distinct from each other.… |
| 1.3.6.1.4.1.495.2.1.6.2.6 | TablefrimSRTable | not-accessible | mandatory | A table containing information about each frame relay system route. |
| 1.3.6.1.4.1.495.2.1.6.2.6.1 | RowfrimSREntry | not-accessible | mandatory | The information for a particular frame relay system route. |
| 1.3.6.1.4.1.495.2.1.6.2.6.1.1 | ColumnfrimSRFrpCircuitSapId | read-only | mandatory | Indicates the 'frpCircuitSapNumber' of the lower SAP in the Frame Relay software layer that provides a system route. Options: 1-16: BOP- or DXI-related lower S… |
| 1.3.6.1.4.1.495.2.1.6.2.6.1.2 | ColumnfrimSRFrpCircuitDlci | read-only | mandatory | Indicates the DLCI (Data Link Connection Identifier) of the virtual circuit using the SAP specified in the 'frpCircuitSapNumber'. Range of Values: 1 - 1, 022 D… |
| 1.3.6.1.4.1.495.2.1.6.2.6.1.3 | ColumnfrimSRProtocolId | read-only | mandatory | Indicates the protocol used in the current connection on the virtual circuit. Options: pidFR: Frame Relay pidLan: LAN pidX25: X.25 pidCcm: Common Console (CX 1… |
| 1.3.6.1.4.1.495.2.1.6.2.6.1.4 | ColumnfrimSRSubRef | read-only | mandatory | Indicates the reference that one user's segment of traffic will be assigned on the outbound PVC to distinguish it from traffic segments of other users of the s… |
| 1.3.6.1.4.1.495.2.1.6.2.6.1.5 | ColumnfrimSRRefRangeEnd | read-write | mandatory | Determines the upper limit of a range of identifiers that different users' traffic segments on the same outbound PVC can use to remain distinct from each other… |
| 1.3.6.1.4.1.495.2.1.6.2.6.1.6 | ColumnfrimSRRowStatus | read-write | mandatory | Determines whether this system route is to be deleted from FRIM software layer. Range of Values: invalid (1): row is flagged; after next reset values will be d… |
| 1.3.6.1.4.1.495.2.1.6.2.6.1.7 | ColumnfrimSRDestFrpCircuitAlias | read-write | mandatory | Identifies the alias of a circuit specified in another software module that will link with the circuit being configured in the Frame Relay module. Range of Val… |
| 1.3.6.1.4.1.495.2.1.6.2.6.1.8 | ColumnfrimSRDestSubRef | read-write | mandatory | Determines the identifier that one user's traffic segment will have to distinguish it from another user's traffic segment sharing the same 'frimSRDestFrpCircui… |
| 1.3.6.1.4.1.495.2.1.6.2.6.1.15 | ColumnfrimSRRouteStatus | read-only | mandatory | Indicates the status of a connection on the system route. Options: notConnected (1): no connection (destination may not exist or has refused connection) inProg… |
| 1.3.6.1.4.1.495.2.1.6.2.6.1.16 | ColumnfrimSRClearStatus | read-only | mandatory | Indicates the reason for a connection failure on the system route. This status is meaningful only between attempts to establish a system route. Successive fail… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| SubRef | INTEGER (0..255) |