CXGwMux-MIB
70 objects
No module-level DESCRIPTION found.
Imported Objects
| CXProduct-SMI | Alias cxGwMux |
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.5.1 | NodegmfConfig | |||
| 1.3.6.1.4.1.495.2.1.6.5.1.1 | ScalargmfMuxInterPassPeriodInMs | read-write | mandatory | Determines the minimum period in milliseconds between the muxing of queued frames. Range of Values: 1-500 Default Value: 10 Configuration Changed: operative |
| 1.3.6.1.4.1.495.2.1.6.5.1.2 | ScalargmfVoiceOverDataPriorityFactor | read-write | mandatory | Determines the maximum number of compressed voice-type frames that can be muxed in sequence before a compressed data-type frame must be muxed. Range of Values:… |
| 1.3.6.1.4.1.495.2.1.6.5.1.3 | ScalargmfStatSamplingPeriod | read-write | mandatory | Determines the maximum duration in seconds for statistical sampling. Resetting this sampling window to a different value zeroes the objects gmfLinkUtilizationT… |
| 1.3.6.1.4.1.495.2.1.6.5.1.4 | ScalargmfNoOfLinkSupported | read-write | mandatory | Determines the number of virtual circuits that the GMF software layer currently supports for compressed voice/data traffic. If '0', voice/data traffic is disab… |
| 1.3.6.1.4.1.495.2.1.6.5.1.5 | ScalargmfNoOfEntryPerFiFo | read-write | mandatory | Determines the maximum number of voice/data entries that the queueing controller (FIFO) in system memory can handle. Range of Values: 32 - 10,000 Default Value… |
| 1.3.6.1.4.1.495.2.1.6.5.1.6 | ScalargmfToFrCouplingLevel | read-write | mandatory | Not currently used. |
| 1.3.6.1.4.1.495.2.1.6.5.1.7 | ScalargmfOutputFlowControlFactor | read-write | mandatory | Determines the extent to which the GMF software layer slows down compressed data (but not compressed voice) traffic from a Data Compression module (if present)… |
| 1.3.6.1.4.1.495.2.1.6.5.1.8 | ScalargmfState | read-only | mandatory | Indicates the state of the GMF software layer at initialization. Report abnormal value to Memotec Service Department. Options: dead (1): CX900/CX1000 abnormal … |
| 1.3.6.1.4.1.495.2.1.6.5.1.9 | ScalargmfCntInfoMsgRelFromBus | read-only | mandatory | Indicates the number of information messages (including Management Console Interface traffic) received from the Token Bus software layer. Range of Values: 0 - … |
| 1.3.6.1.4.1.495.2.1.6.5.1.10 | ScalargmfCntInfoMsgRelFromWan | read-only | mandatory | Indicates the number of compressed voice/data messages received from the Frame Relay software layer. Range of Values: 0 - 4, 294, 967, 295 Default Value: none |
| 1.3.6.1.4.1.495.2.1.6.5.1.11 | ScalargmfCntTxAckToWan | read-only | mandatory | Indicates the number of ACKs sent to the Frame Relay software layer. Range of Values: 0 - 4, 294, 967, 295 Default Value: none |
| 1.3.6.1.4.1.495.2.1.6.5.1.12 | ScalargmfCntUnexpLinkNoFromWan | read-only | mandatory | Indicates the number of unexpected DLCIs in message headers received from the Frame Relay software layer. Range of Values: 0-4, 294, 967, 295 Default Value: no… |
| 1.3.6.1.4.1.495.2.1.6.5.1.13 | ScalargmfCntFrmTooShortFromWan | read-only | mandatory | Indicates the number of short frames received from the Frame Relay software layer and then discarded. Range of Values: 0 - 4, 294, 967, 295 Default Value: none |
| 1.3.6.1.4.1.495.2.1.6.5.1.14 | ScalargmfCntFrmTooLongFromWan | read-only | mandatory | Indicates the number of long frames received from the Frame Relay software layer and then discarded. Range of Values: 0 - 4, 294, 967, 295 Default Value: none |
| 1.3.6.1.4.1.495.2.1.6.5.1.15 | ScalargmfLongestTimeToMux | read-only | mandatory | Indicates the duration in milliseconds for the longest mux pass. Range of Values: 0 - 4, 294, 967, 295 Default Value: none |
| 1.3.6.1.4.1.495.2.1.6.5.1.16 | ScalargmfCntSilentConnections | read-only | mandatory | Indicates the number of connections with the Voice Module (CX 900 only) or with a local AC 600/MC 600/HC 600 (CX 1000 only) that have been dropped by the GMF s… |
| 1.3.6.1.4.1.495.2.1.6.5.1.17 | ScalargmfCntMuxPassTimeExceeded | read-only | obsolete | Not currently used. |
| 1.3.6.1.4.1.495.2.1.6.5.1.18 | ScalargmfMciCurrentConnection | read-only | obsolete | Not currently used. |
| 1.3.6.1.4.1.495.2.1.6.5.1.19 | ScalargmfCntInfoMsgRelFromVce | read-only | mandatory | Indicates the number of information messages received from the Voice module (if present). Range of Values: 0 - 4, 294, 967, 295 Default Value: none |
| 1.3.6.1.4.1.495.2.1.6.5.1.20 | ScalargmfCntGlobalFlowCtlCond | read-only | mandatory | Indicates the number of times that voice/data entries nearly exceeded what the queuing controller (FIFO) in system memory could handle as defined in 'gmfNoOfEn… |
| 1.3.6.1.4.1.495.2.1.6.5.1.21 | ScalargmfNoOfVoicePacketQueued | read-write | mandatory | Determines the maximum number of voice packets that can be buffered before being muxed. Range of Values: 0-8 Default Value: 4 Configuration Changed: operative |
| 1.3.6.1.4.1.495.2.1.6.5.1.22 | ScalargmfControlStats | write-only | mandatory | Clears GMF statistics not related to sampling period. Options: clearStats (1): clear statistics Default Value: none Configuration Changed: operative |
| 1.3.6.1.4.1.495.2.1.6.5.2 | TablegmfRouteTable | not-accessible | mandatory | GMF routing table. The table maintains a row per slot source (i.e. 16 possible rows for the CX 1000 chassis) and GMF link number. This table is has no meaning … |
| 1.3.6.1.4.1.495.2.1.6.5.2.1 | RowgmfRouteEntry | not-accessible | mandatory | Each row associates a slot destination number for each possible route number with a specific <source slot number>.<GMF link number to use> combination. |
| 1.3.6.1.4.1.495.2.1.6.5.2.1.1 | ColumngmfOrigin | read-only | mandatory | Indicates the slot in the chassis occupied by a CPU card sending compressed voice/data packets. Range of Values: 1-16 Default Value: none Configuration Changed… |
| 1.3.6.1.4.1.495.2.1.6.5.2.1.2 | ColumngmfLink | read-only | mandatory | Indicates a valid route number established in 'gmfNoOfLinkSupported' that is used by the Voice/Data Compression module to send compressed voice/data packets to… |
| 1.3.6.1.4.1.495.2.1.6.5.2.1.3 | ColumngmfDest | read-write | mandatory | Determines the slot in an equivalent chassis across the network occupied by a CPU card receiving compressed voice/data packets. Range of Values: 1-16 Default V… |
| 1.3.6.1.4.1.495.2.1.6.5.2.1.4 | ColumngmfRouteRowStatus | read-write | mandatory | Determines whether this slot/route combination is to be deleted from the GMF software layer. Options: invalid (1): Row is deleted from the table immediately, h… |
| 1.3.6.1.4.1.495.2.1.6.5.3 | TablegmfLinkStatTable | not-accessible | mandatory | GMF links statistics table. The table maintains a row per link. |
| 1.3.6.1.4.1.495.2.1.6.5.3.1 | RowgmfLinkStatEntry | not-accessible | mandatory | Each row contains the state variables and general counters associated with a particular link. |
| 1.3.6.1.4.1.495.2.1.6.5.3.1.1 | ColumngmfLinkIndex | read-only | mandatory | Indicates the row containing objects for monitoring the virtual circuit. Range of Values: 1 - 48 Default Value: none |
| 1.3.6.1.4.1.495.2.1.6.5.3.1.2 | ColumngmfLinkStatus | read-only | mandatory | Indicates the virtual circuit's current state. Options: down (1): circuit is down init (2): circuit is initializing up (3): circuit is up Default Value: none |
| 1.3.6.1.4.1.495.2.1.6.5.3.1.3 | ColumngmfLinkType | read-only | mandatory | Indicates routing of virtual circuit from GMF software layer. Options: bound-to-FR (1): direct to Frame Relay module routed-to-IAM (2): direct to Inter-Applica… |
| 1.3.6.1.4.1.495.2.1.6.5.3.1.4 | ColumngmfCntDataFrmMx | read-only | mandatory | Indicates the number of data frames that have been muxed since the last power up or since 'gmfControlStats' was set to 'clearStats'. Range of Values: 0 - 4, 29… |
| 1.3.6.1.4.1.495.2.1.6.5.3.1.5 | ColumngmfCntDataFrmDmx | read-only | mandatory | Indicates the number of data frames that have been demuxed since the last power up or since 'gmfControlStats' was set to 'clearStats'. Range of Values: 0 - 4, … |
| 1.3.6.1.4.1.495.2.1.6.5.3.1.6 | ColumngmfCntVoiceFrmMx | read-only | mandatory | Indicates the number of voice frames that have been muxed since the last power up or since 'gmfControlStats' was set to 'clearStats'. Range of Values: 0 - 4, 2… |
| 1.3.6.1.4.1.495.2.1.6.5.3.1.7 | ColumngmfCntVoiceFrmDmx | read-only | mandatory | Indicates the number of compressed voice frames that have been demuxed since the last power up or since 'gmfControlStats' was set to 'clearStats'. Range of Val… |
| 1.3.6.1.4.1.495.2.1.6.5.3.1.8 | ColumngmfCntLinkDown | read-only | mandatory | Indicates the number of notifications received from the Frame Relay software layer that the PVC has been down since the last power up or since 'gmfControlStats… |
| 1.3.6.1.4.1.495.2.1.6.5.3.1.9 | ColumngmfLinkUtilizationTx | read-only | mandatory | Indicates the transfer rate in bits per second of data moving from the local Voice/Data Compression module to the Frame Relay module within the last sampling p… |
| 1.3.6.1.4.1.495.2.1.6.5.3.1.10 | ColumngmfLinkUtilizationRx | read-only | mandatory | Indicates the transfer rate in bits per second of data moving from the Frame Relay module to the local Voice/Data Compression module within the last sampling p… |
| 1.3.6.1.4.1.495.2.1.6.5.3.1.11 | ColumngmfLinkErrorRate | read-only | mandatory | Indicates the number of sequence errors occurring within the last sampling period on the virtual circuit between the GMF and the Frame Relay software layers. R… |
| 1.3.6.1.4.1.495.2.1.6.5.3.1.12 | ColumngmfCntInFlowCtrlMuxSide | read-only | mandatory | Indicates the number of times the GMF software layer has notified the Voice/Data Compression module to slow its traffic. This value is zeroed when 'gmfControlS… |
| 1.3.6.1.4.1.495.2.1.6.5.3.1.13 | ColumngmfCntOutFlowCtrlWanSide | read-only | mandatory | Indicates the number of times the GMF software layer has slowed its muxing of data traffic due to messages received from the Frame Relay software layer with th… |
| 1.3.6.1.4.1.495.2.1.6.5.3.1.14 | ColumngmfCntSeqErrorFromMux | read-only | mandatory | Indicates the number of times the GMF software layer detected sequence errors in the data stream coming from the Voice/Data Compression module since the last p… |
| 1.3.6.1.4.1.495.2.1.6.5.3.1.15 | ColumngmfCntSeqErrorFromWan | read-only | mandatory | Indicates the number of times the GMF software layer detected sequence errors in the data stream coming from the Frame Relay software layer since the last powe… |
| 1.3.6.1.4.1.495.2.1.6.5.3.1.16 | ColumngmfCntSilentLink | read-only | mandatory | Indicates whether the GMF software layer detected a silence on the virtual circuit between the GMF and Frame Relay software layer since the last power up or si… |
| 1.3.6.1.4.1.495.2.1.6.5.3.1.17 | ColumngmfCntSeqErrorForced | read-only | mandatory | Indicates the number of times the GMF software layer forced a sequence error in a message to the Frame Relay software layer since the last power up or since 'g… |
| 1.3.6.1.4.1.495.2.1.6.5.3.1.18 | ColumngmfCntUnexpLoopBack | read-only | mandatory | Not currently used. |
| 1.3.6.1.4.1.495.2.1.6.5.3.1.19 | ColumngmfCntRemoteRestarted | read-only | mandatory | Not currently used. |
| 1.3.6.1.4.1.495.2.1.6.5.3.1.20 | ColumngmfCntVoiceMuxInterrupted | read-only | mandatory | Indicates the number of times the GMF software layer stopped muxing current voice traffic to allow for muxing of data traffic in accordance with the 'gmfVoiceO… |
| 1.3.6.1.4.1.495.2.1.6.5.3.1.21 | ColumngmfCntDataQueueFull | read-only | mandatory | Indicates the number of times that data entries exceeded the capacity of the queueing controller (FIFO) in system memory since the last power up or since 'gmfC… |
| 1.3.6.1.4.1.495.2.1.6.5.3.1.22 | ColumngmfCntVoiceQueueFull | read-only | mandatory | Indicates the number of times that voice entries exceeded the capacity of the queueing controller (FIFO) in system memory since the last power up or since 'gmf… |
| 1.3.6.1.4.1.495.2.1.6.5.3.1.23 | ColumngmfCntUnexpSliceType | read-only | mandatory | Indicates the number of times the GMF software layer detected a message of an unexpected type from a Voice/Data Compression module since the last power up or s… |
| 1.3.6.1.4.1.495.2.1.6.5.3.1.24 | ColumngmfCntRouteChange | read-only | mandatory | Indicates the number of times an active routing entry using this virtual circuit has been killed through on-the-fly route changes with 'gmfRouteEntry' since th… |
| 1.3.6.1.4.1.495.2.1.6.5.3.1.25 | ColumngmfCntTooManyCodes | read-only | mandatory | Indicates the number of times the GMF software layer received a compressed voice/data packet containing too many codes from the Voice/Data Compression module s… |
| 1.3.6.1.4.1.495.2.1.6.5.3.1.26 | ColumngmfCntPosValidation | read-only | mandatory | Indicates the number of positive validations the GMF software layer has sent the Voice/Data Compression module since the last power up or since 'gmfControlStat… |
| 1.3.6.1.4.1.495.2.1.6.5.3.1.27 | ColumngmfCntNegValidation | read-only | mandatory | Indicates the number of negative validations the GMF software layer has sent the Voice/Data Compression module since the last power up or since 'gmfControlStat… |
| 1.3.6.1.4.1.495.2.1.6.5.3.1.29 | ColumngmfControlLink | write-only | mandatory | Determines whether the GMF software layer puts link in normal mode or in loopback mode. Options: forceNormal (1): puts link in normal mode forceLoopback (2): p… |
| 1.3.6.1.4.1.495.2.1.6.5.3.1.30 | ColumngmfDataOutWindowWidth | read-write | mandatory | Determines the width in the transmit window given to data traffic in relation to voice traffic. The lower this value, the more restricted will be the flow of d… |
| 1.3.6.1.4.1.495.2.1.6.5.3.1.31 | ColumngmfDataOutPriority | read-write | mandatory | Determines the priority given to outbound data traffic routed through the FRIM software layer. Priority for traffic routed directly through the Frame Relay sof… |
| 1.3.6.1.4.1.495.2.1.6.5.4 | TablegmfSRTable | not-accessible | mandatory | GMF system routing table. The table may contain a row per GMF link i.e. up to 48 rows (currently). |
| 1.3.6.1.4.1.495.2.1.6.5.4.1 | RowgmfSREntry | not-accessible | mandatory | Each row associates an alias and a subref field to a GMF's link. |
| 1.3.6.1.4.1.495.2.1.6.5.4.1.1 | ColumngmfSRLink | read-only | mandatory | Indicates a valid route number established in 'gmfNoOfLinkSupported' used by the Voice/Data Compression module to send compressed voice/data packets to the Fra… |
| 1.3.6.1.4.1.495.2.1.6.5.4.1.2 | ColumngmfSRDestCircuitAlias | read-write | mandatory | Determines the alias of a circuit specified in the Frame Relay software layer that will link with the GMF route. Range of Values: (CX 1000) 0 - 35 alphanumeric… |
| 1.3.6.1.4.1.495.2.1.6.5.4.1.3 | ColumngmfSRSubRef | read-write | mandatory | Determines the reference that one user's segment of traffic will be assigned on the outbound PVC to distinguish it from traffic segments of other users of the … |
| 1.3.6.1.4.1.495.2.1.6.5.4.1.4 | ColumngmfSRConStatus | read-only | mandatory | Indicates status of connection on the system route. Options: not-init (1): system route not initialized closed (2): system route closed waitForQueryConf (3): i… |
| 1.3.6.1.4.1.495.2.1.6.5.4.1.5 | ColumngmfSRFailStatus | read-only | mandatory | Indicates the reason for a connection failure on a system route prior to the next attempt to establish a connection on that route. Default Value: none Options:… |
| 1.3.6.1.4.1.495.2.1.6.5.4.1.6 | ColumngmfSRRowStatus | read-write | mandatory | Determines whether this system route is in service or is to be deleted from the GMF software layer. Options: invalid (1): Row is deleted from the table immedia… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| SubRef | INTEGER (0..255) |