CXLapBConv-MIB
29 objects
No module-level DESCRIPTION found.
Imported Objects
| CXProduct-SMI | Alias cxLapBConv SapIndex |
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.28.1 | ScalarlapbcnvSysRouteConnectInterval | read-write | mandatory | Determines the number of seconds between attempts to establish a connection for a LAPB system route. A connection is attempted only for defined non-connected r… |
| 1.3.6.1.4.1.495.2.1.6.28.10 | TablelapbcnvSapTable | not-accessible | mandatory | A table containing configuration information about each LAPB convergence service access point. Service access points of this type exist at the upper interface … |
| 1.3.6.1.4.1.495.2.1.6.28.10.1 | RowlapbcnvSapEntry | not-accessible | mandatory | Defines a row in the Service Access Point Configuration table. Each row contains the objects which are used to define a service access point upper interface of… |
| 1.3.6.1.4.1.495.2.1.6.28.10.1.1 | ColumnlapbcnvSapNumber | read-only | mandatory | Identifies this SAP (service access point) with a numerical value. Values are unique for each service access point. |
| 1.3.6.1.4.1.495.2.1.6.28.10.1.2 | ColumnlapbcnvSapRowStatus | read-write | mandatory | Determines the status of the objects in a table row. Options: invalid (1): Row is deleted from the table immediately, however values are still in effect until … |
| 1.3.6.1.4.1.495.2.1.6.28.10.1.3 | ColumnlapbcnvSapAlias | read-write | mandatory | Identifies this service access point by a textual name. Names must be unique across all service access points at all layers. Range of Values: 1 -16 alphanumeri… |
| 1.3.6.1.4.1.495.2.1.6.28.10.1.5 | ColumnlapbcnvSapControl | write-only | mandatory | Permits control of a specific SAP (service access point). Options: clearStats (1): Clear all statistics stored by statistics objects. Configuration Changed: op… |
| 1.3.6.1.4.1.495.2.1.6.28.10.1.6 | ColumnlapbcnvSapState | read-only | mandatory | Indicates the current state of this SAP (service access point). Options: offLine (1): Indicates a newly created service access point whose configuration has no… |
| 1.3.6.1.4.1.495.2.1.6.28.10.1.7 | ColumnlapbcnvSapTxFrames | read-only | mandatory | Indicates the number of frames transmitted by this service access point. |
| 1.3.6.1.4.1.495.2.1.6.28.10.1.8 | ColumnlapbcnvSapRxFrames | read-only | mandatory | Indicates the number of frames received by this service access point. |
| 1.3.6.1.4.1.495.2.1.6.28.10.1.9 | ColumnlapbcnvSapTxOctets | read-only | mandatory | Indicates the number of octets transmitted by this service access point. |
| 1.3.6.1.4.1.495.2.1.6.28.10.1.10 | ColumnlapbcnvSapRxOctets | read-only | mandatory | Indicates the number of octets received by this service access point. |
| 1.3.6.1.4.1.495.2.1.6.28.10.1.11 | ColumnlapbcnvSapOutSuccessfullConnects | read-only | mandatory | Indicates the number of successful outgoing connections established by this SAP (service access point). An outgoing connection is always attempted from LAPB co… |
| 1.3.6.1.4.1.495.2.1.6.28.10.1.12 | ColumnlapbcnvSapOutUnsuccessfullConnects | read-only | mandatory | Indicates the number of unsuccessful outgoing connections attempted by this SAP (service access point). An outgoing connection is always attempted from LAPB co… |
| 1.3.6.1.4.1.495.2.1.6.28.10.1.13 | ColumnlapbcnvSapInSuccessfullConnects | read-only | mandatory | Indicates the number of successful incoming connections established at this SAP (service access point). An incoming connection is always attempted from the Int… |
| 1.3.6.1.4.1.495.2.1.6.28.10.1.14 | ColumnlapbcnvSapInUnsuccessfullConnects | read-only | mandatory | Indicates the number of unsuccessful incoming connections attempted at this SAP (service access point). An incoming connection is always attempted from the Int… |
| 1.3.6.1.4.1.495.2.1.6.28.10.1.15 | ColumnlapbcnvSapUnopenedServiceDiscards | read-only | mandatory | This object applies only to the PSAP (public service access point). Indicates the number of frames received and discarded by the PSAP because: - no route was a… |
| 1.3.6.1.4.1.495.2.1.6.28.10.1.16 | ColumnlapbcnvSapTxResets | read-only | mandatory | This object applies only to the PSAP (public service access point). Indicates the number of Inter- Application Module (IAM) reset frames sent by the PSAP. |
| 1.3.6.1.4.1.495.2.1.6.28.10.1.17 | ColumnlapbcnvSapRxResets | read-only | mandatory | This object applies only to the PSAP. Indicates the number of Inter- Application Module (IAM) reset frames received by the PSAP. |
| 1.3.6.1.4.1.495.2.1.6.28.11 | TablelapbcnvSysRouteTable | not-accessible | mandatory | A table containing information about each LAPB system route. Routes allow this LAPB/D layer to link with another LAPB/D layer across a frame relay network, or … |
| 1.3.6.1.4.1.495.2.1.6.28.11.1 | RowlapbcnvSysRouteEntry | not-accessible | mandatory | Defines a row in the lapbcnvSysRouteTable. Each row contains the objects which define a system route. |
| 1.3.6.1.4.1.495.2.1.6.28.11.1.1 | ColumnlapbcnvSRSapNumber | read-only | mandatory | Identifies the service access point this route entry is associated with. |
| 1.3.6.1.4.1.495.2.1.6.28.11.1.2 | ColumnlapbcnvSRRowStatus | read-write | mandatory | Determines the status of the objects in a table row. Options: invalid (1): Row is deleted from the table immediately, however values are still in effect until … |
| 1.3.6.1.4.1.495.2.1.6.28.11.1.3 | ColumnlapbcnvSRDestAlias | read-write | mandatory | Determines the textual name of the destination service this route connects to. When attempting a LAPB connection across Frame Relay, this object specifies the … |
| 1.3.6.1.4.1.495.2.1.6.28.11.1.4 | ColumnlapbcnvSRSubRef | read-write | mandatory | Specifies a reference number that uniquely identifies this route. This number is used by the FRIM (Frame Relay Interface Module) to identify routes using the s… |
| 1.3.6.1.4.1.495.2.1.6.28.11.1.10 | ColumnlapbcnvSRRouteStatus | read-only | mandatory | Indicates the connection status of this LAPB route. Options: offLine (1): Indicates that the LAPB Convergence SAP this route is associated with does not exist … |
| 1.3.6.1.4.1.495.2.1.6.28.11.1.11 | ColumnlapbcnvSRClearStatus | read-only | mandatory | Indicates the status of a failed connection. The value of this object is only valid only between attempts to establish the route connection (lapbcnvSRRouteStat… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| PSapIndex | INTEGER (0..255) | ||
| SubRef | INTEGER (0..255) |