CXLapBD-MIB
99 objects
No module-level DESCRIPTION found.
Imported Objects
| CXProduct-SMI | Alias cxLapBD SapIndex |
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter |
| RFC1213-MIB | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.27.1 | ScalarlapbdLowerPoolThreshold | read-write | mandatory | Determines the lower global resource threshold (available buffer space), that when reached, causes the LAPB/D layer to initiate flow control (transmission of R… |
| 1.3.6.1.4.1.495.2.1.6.27.1 | NodelapbdStatusIndication | Identifies the lapbdStatusEvent trap which has occurred. This trap is only generated when global object lapbdTraps is set to value 'enabled'. Options: lapbdTei… | ||
| 1.3.6.1.4.1.495.2.1.6.27.2 | ScalarlapbdUpperPoolThreshold | read-write | mandatory | Determines the upper global resource threshold (available buffer space), that when reached, causes the LAPB/D layer to cancel flow control. This is a global va… |
| 1.3.6.1.4.1.495.2.1.6.27.3 | ScalarlapbdTraceSize | read-write | mandatory | Defines the number of bytes that are traced in each data buffer that is transmitted or received. Range of Values: 0 - 30 Default Value: 15 Related Objects: lap… |
| 1.3.6.1.4.1.495.2.1.6.27.4 | ScalarlapbdTraceFlags | read-write | mandatory | Specifies which events are traced. Each bit in this object is mapped to a specific event. Turning the bit on causes the event to be traced. - bit 1: trace all … |
| 1.3.6.1.4.1.495.2.1.6.27.7 | ScalarlapbdTraps | read-write | mandatory | Determines if this layer generates the lapbdStatusIndication trap. Options: disabled (1): This layer does not generate the lapbdStatusIndication trap. enabled … |
| 1.3.6.1.4.1.495.2.1.6.27.8 | ScalarlapbdStatusEvent | read-only | mandatory | Indicates the status reported by a lapbdStatusIndication trap when it occurs. This object always returns the value 'noEvent' when read. Options: noEvent (1): T… |
| 1.3.6.1.4.1.495.2.1.6.27.10 | ScalarlapbdSoftwareVersions | read-only | mandatory | Identifies the LAPB/D software revision number, which is displayed as a string of five numbers each separated by a period (1.2.3.4.5). The five numbers represe… |
| 1.3.6.1.4.1.495.2.1.6.27.20 | TablelapbdMacSapTable | not-accessible | mandatory | A table containing configuration information about each LAPB/D lower service access point. |
| 1.3.6.1.4.1.495.2.1.6.27.20.1 | RowlapbdMacSapEntry | not-accessible | mandatory | The parameters for a specific LAPB/D lower (MAC) service access point. |
| 1.3.6.1.4.1.495.2.1.6.27.20.1.1 | ColumnlapbdMacSapNumber | read-only | mandatory | Identifies the service access point by a unique numerical value. |
| 1.3.6.1.4.1.495.2.1.6.27.20.1.2 | ColumnlapbdMacSapRowStatus | read-write | mandatory | Determines the status of the objects in a table row. Options: invalid (1): Row is deleted from the table immediately, however values are still in effect until … |
| 1.3.6.1.4.1.495.2.1.6.27.20.1.3 | ColumnlapbdMacSapAlias | read-write | mandatory | Identifies the service access point by a textual name. Service access point names must be unique across all layers. Range of Values: 1 -16 alphanumeric charact… |
| 1.3.6.1.4.1.495.2.1.6.27.20.1.4 | ColumnlapbdMacSapCompanionAlias | read-write | mandatory | Identifies by a textual name, the remote service access point with which this service access point will communicate with. Service access point names must be un… |
| 1.3.6.1.4.1.495.2.1.6.27.20.1.5 | ColumnlapbdMacSapLapType | read-write | mandatory | Determines the type of link access procedure provided by this MAC SAP (service access point): LAPB or LAPD. It also determines the number of data link SAPs tha… |
| 1.3.6.1.4.1.495.2.1.6.27.20.1.6 | ColumnlapbdMacSapLogicalInterfaceType | read-write | mandatory | Determines the logical interface type of the SAP (service access point): DTE or DCE. This is true only when the object lapbdMacSapLapType is set to 'lapb'. Whe… |
| 1.3.6.1.4.1.495.2.1.6.27.20.1.7 | ColumnlapbdMacSapArbitrationLogic | read-write | mandatory | Determines if the SAP initiates the link (active) by sending a SABM (LAPB) or a SABME (LAPD) to the other side. Both sides can be active. However, typically th… |
| 1.3.6.1.4.1.495.2.1.6.27.20.1.8 | ColumnlapbdMacSapLapDProtocolFlavor | read-write | mandatory | This object applies only to LAPD (object lapbdMacSapLapType set to 'lapd'). Determines how TEI (terminal endpoint identifier) assignments are handled. Options:… |
| 1.3.6.1.4.1.495.2.1.6.27.20.1.9 | ColumnlapbdMacSapLapBProtocolFlavor | read-write | mandatory | This object applies only to LAPB (object lapbdMacSapLapType set to 'lapb'). Determines the LAPB protocol variant used by this SAP (service access point). Setti… |
| 1.3.6.1.4.1.495.2.1.6.27.20.1.10 | ColumnlapbdMacSapWindow | read-write | mandatory | Determines the maximum number of frames that can be outstanding at any given time to a sub-layer. A frame is considered to be outstanding until its receipt is … |
| 1.3.6.1.4.1.495.2.1.6.27.20.1.11 | ColumnlapbdMacSapTxQUpperThreshold | read-write | mandatory | Defines the threshold which declares a data link connection on this MAC SAP (service access point) to be congested. When the number of frames in the queue for … |
| 1.3.6.1.4.1.495.2.1.6.27.20.1.12 | ColumnlapbdMacSapTxQLowerThreshold | read-write | mandatory | Defines the threshold which declares a data link connection on this MAC SAP (service access point) to no longer be congested. When the number of frames in the … |
| 1.3.6.1.4.1.495.2.1.6.27.20.1.13 | ColumnlapbdMacSapConnectionTimer | read-write | mandatory | Determines the maximum amount of time that the LAPB/D layer waits for a sub- layer to respond to a connection request. If this timer expires before a response … |
| 1.3.6.1.4.1.495.2.1.6.27.20.1.14 | ColumnlapbdMacSapT202Timer | read-write | mandatory | This object applies only when: object lapbdMacSapLapType is set to 'lapd' object lapbdMacSapLogicalInterfaceType is set to 'dte' (user side) object lapbdDlSapT… |
| 1.3.6.1.4.1.495.2.1.6.27.20.1.15 | ColumnlapbdMacSapN202Counter | read-write | mandatory | This object applies only when: object lapbdMacSapLapType is set to 'lapd' object lapbdMacSapLogicalInterfaceType is set to 'dte' (user side) object lapbdDlSapT… |
| 1.3.6.1.4.1.495.2.1.6.27.20.1.16 | ColumnlapbdMacSapTeiCheckTimer | read-write | mandatory | This object applies only when: object lapbdMacSapLapType is set to 'lapd' object lapbdMacSapLogicalInterfaceType is set to 'dce' (network side/ASP) object lapb… |
| 1.3.6.1.4.1.495.2.1.6.27.20.1.17 | ColumnlapbdMacSapT201Timer | read-write | mandatory | This object applies only when: object lapbdMacSapLapType is set to 'lapd' object lapbdMacSapLogicalInterfaceType is set to 'dce' (network side/ASP) object lapb… |
| 1.3.6.1.4.1.495.2.1.6.27.20.1.18 | ColumnlapbdMacSapLowTei | read-write | mandatory | This object applies only to LAPD (object lapbdMacSapLapType set to 'lapd') Determines lower boundary for automatic TEI assignments. This defines the ranges for… |
| 1.3.6.1.4.1.495.2.1.6.27.20.1.19 | ColumnlapbdMacSapKeepL1Up | read-write | mandatory | This object applies only to LAPD (object lapbdMacSapLapType set to 'lapd'). Determines how this SAP (service access point) handles connections with the sub-lay… |
| 1.3.6.1.4.1.495.2.1.6.27.20.1.30 | ColumnlapbdMacSapControl | write-only | mandatory | Permits control of a specific MAC SAP (service access point). Options: clearStats (1): Clear all statistics stored by lapbdMacSap statistics objects. enableTra… |
| 1.3.6.1.4.1.495.2.1.6.27.20.1.35 | ColumnlapbdMacSapHighLevelState | read-only | mandatory | Indicates the current state of this MAC SAP (service access point). Options: unbound (1): Initial state when the SAP is added. configured (2): The layer manage… |
| 1.3.6.1.4.1.495.2.1.6.27.20.1.36 | ColumnlapbdMacSapFlowControlState | read-only | mandatory | Indicates the status of flow control on this MAC SAP (service access point). Flow control is initiated by this MAC SAP when overall system resources drop lower… |
| 1.3.6.1.4.1.495.2.1.6.27.20.1.37 | ColumnlapbdMacSapOutstandingFrames | read-only | mandatory | Indicates the current number of outstanding frames to the sub-layer. The object lapbdMacSapWindow defines the maximum number of frames that can be outstanding. |
| 1.3.6.1.4.1.495.2.1.6.27.20.1.38 | ColumnlapbdMacSapTotalFramesDropped | read-only | mandatory | Indicates the number of frames dropped by this MAC service access point, which may be due to an internal problem between the MAC layer and the sub-layer it is … |
| 1.3.6.1.4.1.495.2.1.6.27.20.1.39 | ColumnlapbdMacSapActiveSaps | read-only | mandatory | This object applies only to LAPD (object lapbdMacSapLapType set to 'lapd'). Indicates the number of active data link SAPs (service access points) associated wi… |
| 1.3.6.1.4.1.495.2.1.6.27.20.1.50 | ColumnlapbdMacSapTxIFrames | read-only | mandatory | Indicates the number of information frames sent from this service access point. |
| 1.3.6.1.4.1.495.2.1.6.27.20.1.51 | ColumnlapbdMacSapRxIFrames | read-only | mandatory | Indicates the number of information frames received at this service access point. |
| 1.3.6.1.4.1.495.2.1.6.27.20.1.52 | ColumnlapbdMacSapTxRrFrames | read-only | mandatory | Indicates the number of receive ready (RR) frames sent from this service access point. |
| 1.3.6.1.4.1.495.2.1.6.27.20.1.53 | ColumnlapbdMacSapRxRrFrames | read-only | mandatory | Indicates the number of receive ready (RR) frames received by this service access point. |
| 1.3.6.1.4.1.495.2.1.6.27.20.1.54 | ColumnlapbdMacSapTxRnrFrames | read-only | mandatory | Indicates the number of receive not ready (RNR) frames transmitted by this service access point. |
| 1.3.6.1.4.1.495.2.1.6.27.20.1.55 | ColumnlapbdMacSapRxRnrFrames | read-only | mandatory | Indicates the number of receive not ready (RNR) frames received by this service access point. |
| 1.3.6.1.4.1.495.2.1.6.27.20.1.56 | ColumnlapbdMacSapTxRejFrames | read-only | mandatory | Indicates the number of reject (REJ) frames transmitted by this service access point. |
| 1.3.6.1.4.1.495.2.1.6.27.20.1.57 | ColumnlapbdMacSapRxRejFrames | read-only | mandatory | Indicates the number of reject (REJ) frames received by this service access point. |
| 1.3.6.1.4.1.495.2.1.6.27.20.1.58 | ColumnlapbdMacSapTxSabmFrames | read-only | mandatory | Indicates the number of set asynchronous balanced mode (SABM) frames transmitted by this service access point. |
| 1.3.6.1.4.1.495.2.1.6.27.20.1.59 | ColumnlapbdMacSapRxSabmFrames | read-only | mandatory | Indicates the number of set asynchronous balanced mode (SABM) frames received by this service access point. |
| 1.3.6.1.4.1.495.2.1.6.27.20.1.60 | ColumnlapbdMacSapTxDiscFrames | read-only | mandatory | Indicates the number of disconnect (DISC) frames sent from this service access point. |
| 1.3.6.1.4.1.495.2.1.6.27.20.1.61 | ColumnlapbdMacSapRxDiscFrames | read-only | mandatory | Indicates the number of disconnect (DISC) frames transmitted by this service access point. |
| 1.3.6.1.4.1.495.2.1.6.27.20.1.62 | ColumnlapbdMacSapTxUaFrames | read-only | mandatory | Indicates the number of unnumbered acknowledgment (UA) frames sent from this service access point. |
| 1.3.6.1.4.1.495.2.1.6.27.20.1.63 | ColumnlapbdMacSapRxUaFrames | read-only | mandatory | Indicates the number of unnumbered acknowledgment (UA) frames received by this service access point. |
| 1.3.6.1.4.1.495.2.1.6.27.20.1.64 | ColumnlapbdMacSapTxDmFrames | read-only | mandatory | Indicates the number of disconnected mode (DM) frames transmitted by this service access point. |
| 1.3.6.1.4.1.495.2.1.6.27.20.1.65 | ColumnlapbdMacSapRxDmFrames | read-only | mandatory | Indicates the number of disconnected mode (DM) frames received by this service access point. |
| 1.3.6.1.4.1.495.2.1.6.27.20.1.66 | ColumnlapbdMacSapTxFrmrFrames | read-only | mandatory | Indicates the number of frame reject (FRMR) frames transmitted by this service access point. |
| 1.3.6.1.4.1.495.2.1.6.27.20.1.67 | ColumnlapbdMacSapRxFrmrFrames | read-only | mandatory | Indicates the number of frame reject (FRMR) frames received by this service access point. |
| 1.3.6.1.4.1.495.2.1.6.27.20.1.68 | ColumnlapbdMacSapTxUiFrames | read-only | mandatory | This object applies only to LAPD (object lapbdMacSapLapType set to 'lapd'). Indicates the number of unnumbered information (UI) frames transmitted by this serv… |
| 1.3.6.1.4.1.495.2.1.6.27.20.1.69 | ColumnlapbdMacSapRxUiFrames | read-only | mandatory | This object applies only to LAPD (object lapbdMacSapLapType set to 'lapd'). Indicates the number of unnumbered information (UI) frames received by this service… |
| 1.3.6.1.4.1.495.2.1.6.27.20.1.70 | ColumnlapbdMacSapTxXidFrames | read-only | mandatory | Indicates the number of XID frames transmitted by this service access point. |
| 1.3.6.1.4.1.495.2.1.6.27.20.1.71 | ColumnlapbdMacSapRxXidFrames | read-only | mandatory | Indicates the number of XID frames received by this service access point. |
| 1.3.6.1.4.1.495.2.1.6.27.20.1.72 | ColumnlapbdMacSapRxInvalidFrames | read-only | mandatory | Indicates the number of invalid frames received by this service access point. |
| 1.3.6.1.4.1.495.2.1.6.27.20.1.73 | ColumnlapbdMacSapRxInvalidDiscards | read-only | mandatory | Indicates the number of frames received at this service access point which were marked as being received in error, and subsequently dropped. The errors covered… |
| 1.3.6.1.4.1.495.2.1.6.27.20.1.74 | ColumnlapbdMacSapSabmErrors | read-only | mandatory | Indicates the number of set asynchronous balanced mode errors that occurred at this service access point. |
| 1.3.6.1.4.1.495.2.1.6.27.20.1.75 | ColumnlapbdMacSapFrmrErrors | read-only | mandatory | Indicates the number of frame reject errors that occurred at this service access point. |
| 1.3.6.1.4.1.495.2.1.6.27.21 | TablelapbdDlSapTable | not-accessible | mandatory | A table containing configuration information about each data link SAP (service access point). Data link SAPs exist at the upper layer of the LAPB/D interface a… |
| 1.3.6.1.4.1.495.2.1.6.27.21.1 | RowlapbdDlSapEntry | not-accessible | mandatory | The parameters for a specific data link service access point. |
| 1.3.6.1.4.1.495.2.1.6.27.21.1.1 | ColumnlapbdDlSapMacSapNumber | read-only | mandatory | Identifies the MAC (lower) service access point this entry is associated with. |
| 1.3.6.1.4.1.495.2.1.6.27.21.1.2 | ColumnlapbdDlSapNumber | read-only | mandatory | Identifies the data link service access point by a unique numerical value, commonly referred to as the SAPI (service access point identifier). The SAPI identif… |
| 1.3.6.1.4.1.495.2.1.6.27.21.1.4 | ColumnlapbdDlSapAlias | read-write | mandatory | The textual name that identifies this SAP (service access point). A name is not required. Range of Values: 1 -16 alphanumeric characters (first character must … |
| 1.3.6.1.4.1.495.2.1.6.27.21.1.5 | ColumnlapbdDlSapMaxFrameSize | read-write | mandatory | Determines the maximum size of the LAPB/D information field supported by this SAP. In other words, it is the maximum number of bytes that can be passed through… |
| 1.3.6.1.4.1.495.2.1.6.27.21.1.6 | ColumnlapbdDlSapWindowSize | read-write | mandatory | Determines the maximum number of information frames that can be outstanding at any given time (window size). A frame is considered to be outstanding until the … |
| 1.3.6.1.4.1.495.2.1.6.27.21.1.7 | ColumnlapbdDlSapMaxRetransmissions | read-write | mandatory | Determines the maximum number of attempts made to successfully transfer a command frame (error recovery) after the acknowledgment timer (lapbdDlSapT1T200Timer)… |
| 1.3.6.1.4.1.495.2.1.6.27.21.1.8 | ColumnlapbdDlSapCongestionTimer | read-write | mandatory | Determines the maximum amount of time LAPB/D waits for the link to become uncongested before it terminates the link. This timer is started when the number of f… |
| 1.3.6.1.4.1.495.2.1.6.27.21.1.9 | ColumnlapbdDlSapT1T200Timer | read-write | mandatory | Determines how long this SAP waits for a response to a command frame before initiating error recovery. Known as the checkpoint timer (T1). The value set for th… |
| 1.3.6.1.4.1.495.2.1.6.27.21.1.10 | ColumnlapbdDlSapT2Timer | read-write | mandatory | This object applies only to LAPB (object lapbdMacSapLapType set to 'lapb'). Determines the period of time (T1)within which this SAP must acknowledge a frame it… |
| 1.3.6.1.4.1.495.2.1.6.27.21.1.11 | ColumnlapbdDlSapT3T203Timer | read-write | mandatory | Determines the maximum time this SAP will allow the link to remain idle (no frames exchanged) before sending an RR poll to the other side. Known as idle probe … |
| 1.3.6.1.4.1.495.2.1.6.27.21.1.12 | ColumnlapbdDlSapModulo | read-write | mandatory | Determines the range of sequence numbers available for frame numbering at this SAP (service access point). The modulo limits the size of the window that can be… |
| 1.3.6.1.4.1.495.2.1.6.27.21.1.13 | ColumnlapbdDlSapMaxDlcs | read-write | mandatory | This object applies only to LAPD (object lapbdMacSapLapType set to 'lapd'). Determines the maximum number of data link connections supported at this service ac… |
| 1.3.6.1.4.1.495.2.1.6.27.21.1.14 | ColumnlapbdDlSapTeiAssignmentMode | read-write | mandatory | This object applies only to LAPD (object lapbdMacSapLapType set to 'lapd'). Determines the TEI assignment mode used by this service access point. Each data lin… |
| 1.3.6.1.4.1.495.2.1.6.27.21.1.15 | ColumnlapbdDlSapHighLevelState | read-only | mandatory | Indicates the current state of this SAP (service access point). Options: unbound (1): Initial state when the SAP is added. configured (2): The layer manager ha… |
| 1.3.6.1.4.1.495.2.1.6.27.21.1.16 | ColumnlapbdDlSapActiveDlcs | read-only | mandatory | This object applies only to LAPD (object lapbdMacSapLapType set to 'lapd'). Indicates the current number of active data link connections at this SAP (service a… |
| 1.3.6.1.4.1.495.2.1.6.27.22 | TablelapbdTeiTable | not-accessible | mandatory | A table containing Terminal Endpoint Identifiers (TEIs) which are to be assigned to identify data link connections. A TEI is used to identify a specific connec… |
| 1.3.6.1.4.1.495.2.1.6.27.22.1 | RowlapbdTeiEntry | not-accessible | mandatory | Determines the settings for a single TEI to be assigned to a data link connected at a specific data link service access point, which exists at a specific MAC (… |
| 1.3.6.1.4.1.495.2.1.6.27.22.1.1 | ColumnlapbdTeiMacSapNumber | read-only | mandatory | This object applies only to LAPD (object lapbdMacSapLapType set to 'lapd'). Identifies the MAC service access point (lapbdMacSapNumber ) this entry is associat… |
| 1.3.6.1.4.1.495.2.1.6.27.22.1.2 | ColumnlapbdTeiSapi | read-only | mandatory | This object applies only to LAPD (object lapbdMacSapLapType set to 'lapd'). Identifies the data link service access point (lapbdDlSapNumber ) this entry is ass… |
| 1.3.6.1.4.1.495.2.1.6.27.22.1.3 | ColumnlapbdTeiNumber | read-only | mandatory | This object applies only to LAPD (object lapbdMacSapLapType set to 'lapd'). Identifies the TEI value assigned for use at the data link service access point ide… |
| 1.3.6.1.4.1.495.2.1.6.27.22.1.4 | ColumnlapbdTeiRowStatus | read-write | mandatory | Determines the status of the objects in a table row. Options: invalid (1): Row is deleted from the table immediately, however values are still in effect until … |
| 1.3.6.1.4.1.495.2.1.6.27.23 | TablelapbdDlcStatusTable | not-accessible | mandatory | A table containing status information for each existing data link connection. |
| 1.3.6.1.4.1.495.2.1.6.27.23.1 | RowlapbdDlcStatusEntry | not-accessible | mandatory | The status of a specific data link connection at a specific data link service access point, which exists at a specific MAC service access point. |
| 1.3.6.1.4.1.495.2.1.6.27.23.1.1 | ColumnlapbdDlcMacSapNumber | read-only | mandatory | Identifies the MAC service access point (lower SAP) this entry is associated with. |
| 1.3.6.1.4.1.495.2.1.6.27.23.1.2 | ColumnlapbdDlcSapi | read-only | mandatory | Identifies the data link service access point (upper SAP) this entry is associated with. |
| 1.3.6.1.4.1.495.2.1.6.27.23.1.3 | ColumnlapbdDlcTei | read-only | mandatory | This object applies only to LAPD (object lapbdMacSapLapType set to 'lapd'). Identifies the TEI value (lapbdTeiNumber) this entry is associated with. |
| 1.3.6.1.4.1.495.2.1.6.27.23.1.4 | ColumnlapbdDlcLinkLevelState | read-only | mandatory | Indicates the current link level state at this data link connection. Options: disconnectedDisabled (1): LAPB/D is disconnected and has not yet received a conne… |
| 1.3.6.1.4.1.495.2.1.6.27.23.1.5 | ColumnlapbdDlcNextTxNs | read-only | mandatory | Indicates the value of the next N(s) to send on this data link connection. |
| 1.3.6.1.4.1.495.2.1.6.27.23.1.6 | ColumnlapbdDlcNextRxNs | read-only | mandatory | Indicates the value of the next N(s) expected by this data link connection. |
| 1.3.6.1.4.1.495.2.1.6.27.23.1.7 | ColumnlapbdDlcRetransmissionCount | read-only | mandatory | Indicates the number of times the current command frame has been transmitted. The value for this object will be greater than 1 when retransmission of a frame i… |
| 1.3.6.1.4.1.495.2.1.6.27.23.1.8 | ColumnlapbdDlcLocalFlowControlState | read-only | mandatory | Indicates the status of flow control on this MAC SAP (service access point). Same as lapbMacSapFlowControlState. Flow control is initiated by this MAC SAP when… |
| 1.3.6.1.4.1.495.2.1.6.27.23.1.9 | ColumnlapbdDlcRemoteFlowControlState | read-only | mandatory | Indicates the status of flow control on the remote side of the link. Options: remoteFlowNormal (1): Data flow is normal. No flow control procedures are active.… |
| 1.3.6.1.4.1.495.2.1.6.27.23.1.10 | ColumnlapbdDlcMacTxFlowControlState | read-only | mandatory | Indicates the status of data flow on the link. Options: flowNormal(1): The data link connection is operating normally. FlowStopped(2): The data link connection… |
| 1.3.6.1.4.1.495.2.1.6.27.23.1.11 | ColumnlapbdDlcTxQSize | read-only | mandatory | Indicates the number of frames currently in the transmit queue for this data link connection. If the number of frames exceeds lapbdMacSapTxQUpperThreshold, the… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Sapi | INTEGER { q930-q931 (0), x25 (16), mngmt (63) } | ||
| Tei | INTEGER (0..127) |