CXLlcFrConv-MIB
35 objects
No module-level DESCRIPTION found.
Imported Objects
| CXProduct-SMI | Alias cxLlcFrConv |
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.33.1 | ScalarllcfrcnvSysRouteConnectInterval | read-write | mandatory | Determines the number of seconds between route connection attempts by the LLC-2 Frame Relay Convergence layer. Range of Values: 10 - 900 seconds Default Value:… |
| 1.3.6.1.4.1.495.2.1.6.33.2 | ScalarllcfrcnvMibLevel | read-only | mandatory | Used to determine current MIB module release supported by the agent. Object is in decimal. |
| 1.3.6.1.4.1.495.2.1.6.33.10 | TablellcfrcnvSapTable | not-accessible | mandatory | This table contains configuration information for each LLC-2 Frame Relay Convergence layer SAP (service access point). |
| 1.3.6.1.4.1.495.2.1.6.33.10.1 | RowllcfrcnvSapEntry | not-accessible | mandatory | Defines a row in the llcfrcnvSapTable. Each row contains the objects which define a service access point. |
| 1.3.6.1.4.1.495.2.1.6.33.10.1.1 | ColumnllcfrcnvSapNumber | read-only | mandatory | Identifies this SAP (service access point) with a numerical value which must be unique for each LLC-2 Frame Relay Convergence SAP. Value 0 is allocated to the … |
| 1.3.6.1.4.1.495.2.1.6.33.10.1.2 | ColumnllcfrcnvSapRowStatus | read-write | mandatory | Determines the status of the objects in a table row. Options: invalid (1): Row is flagged, after next reset the values will be disabled and the row is deleted … |
| 1.3.6.1.4.1.495.2.1.6.33.10.1.3 | ColumnllcfrcnvSapAlias | read-write | mandatory | Identifies this service access point by a textual name. Names must be unique across all service access points at all layers. Range of Values: 1 -16 alphanumeri… |
| 1.3.6.1.4.1.495.2.1.6.33.10.1.4 | ColumnllcfrcnvSapSrcLlcSap | read-write | mandatory | Determines the source LLC-2 SAP address associated with this connection. Only even values are allowed (usually assigned as a multiple of 04 hexadecimal). This … |
| 1.3.6.1.4.1.495.2.1.6.33.10.1.5 | ColumnllcfrcnvSapDstLlcSap | read-write | mandatory | Determines the destination LLC-2 SAP address associated with this connection. Only even values are allowed (usually assigned as a multiple of 04 hexadecimal). … |
| 1.3.6.1.4.1.495.2.1.6.33.10.1.6 | ColumnllcfrcnvSapRouteIndex | read-write | mandatory | Determines the route associated with this SAP (service access point). The value of this object is the llcfrcnvSRIndex which identifies the route in the llcfrcn… |
| 1.3.6.1.4.1.495.2.1.6.33.10.1.7 | ColumnllcfrcnvSapControl | write-only | mandatory | Clears all objects that contain statistics for this service access point. Options: clearStats (1) Configuration Changed: administrative and operative |
| 1.3.6.1.4.1.495.2.1.6.33.10.1.8 | ColumnllcfrcnvSapState | read-only | mandatory | Indicates the status of the SAP (service access point). Options: offLine (1): Indicates that the SAP is not configured. unbound (2): Indicates that this SAP is… |
| 1.3.6.1.4.1.495.2.1.6.33.10.1.9 | ColumnllcfrcnvSapTxFrames | read-only | mandatory | Indicates the number of frames transmitted by this service access point. |
| 1.3.6.1.4.1.495.2.1.6.33.10.1.10 | ColumnllcfrcnvSapRxFrames | read-only | mandatory | Indicates the number of frames received by this service access point. |
| 1.3.6.1.4.1.495.2.1.6.33.10.1.11 | ColumnllcfrcnvSapTxOctets | read-only | mandatory | Indicates the number of octets transmitted by this service access point. |
| 1.3.6.1.4.1.495.2.1.6.33.10.1.12 | ColumnllcfrcnvSapRxOctets | read-only | mandatory | Indicates the number of octets received by this service access point. |
| 1.3.6.1.4.1.495.2.1.6.33.10.1.13 | ColumnllcfrcnvSapUnopenedServiceDiscards | read-only | mandatory | Indicates the number of frames received and discarded by this service access point because there was no associated connection. |
| 1.3.6.1.4.1.495.2.1.6.33.10.1.14 | ColumnllcfrcnvSapTxResets | read-only | mandatory | Indicates the number of connection reset requests issued from this service access point. |
| 1.3.6.1.4.1.495.2.1.6.33.10.1.15 | ColumnllcfrcnvSapRxResets | read-only | mandatory | Indicates the number of connection reset requests/indications received by this service access point. |
| 1.3.6.1.4.1.495.2.1.6.33.10.1.16 | ColumnllcfrcnvSapHostMacAddr | read-write | mandatory | This object specifies the MAC address of the host station to which the FR LLC-2 connection will be established - Used only for SNA BAN Transport. If this objec… |
| 1.3.6.1.4.1.495.2.1.6.33.10.1.17 | ColumnllcfrcnvSapCntrMacAddr | read-write | mandatory | This object specifies the MAC address of the work station which will be connected to the host - Used only for SNA BAN Transport. If this object is configured, … |
| 1.3.6.1.4.1.495.2.1.6.33.11 | TablellcfrcnvSysRouteTable | not-accessible | mandatory | This table contains information about each LLC-2 FR Convergence system route. |
| 1.3.6.1.4.1.495.2.1.6.33.11.1 | RowllcfrcnvSysRouteEntry | not-accessible | mandatory | Defines a row in the llcfrcnvSysRouteTable. Each row contains the objects which define an LLC-2 FR Convergence system route. |
| 1.3.6.1.4.1.495.2.1.6.33.11.1.1 | ColumnllcfrcnvSRIndex | read-only | mandatory | A number that uniquely identifies each LLC-2 Frame Relay Convergence Route. Related Objects: llcfrcnvSapRouteIndex Range of Values: 0 - 64 |
| 1.3.6.1.4.1.495.2.1.6.33.11.1.2 | ColumnllcfrcnvSRRowStatus | read-write | mandatory | Determines the status of the objects in a table row. Options: invalid (1): Row is flagged, after next reset the values will be disabled and the row is deleted … |
| 1.3.6.1.4.1.495.2.1.6.33.11.1.3 | ColumnllcfrcnvSRDestAlias | read-write | mandatory | Identifies the textual name of the destination service this route connects to. The destination alias is the name of the Frame Relay layer outlet circuit (frpCi… |
| 1.3.6.1.4.1.495.2.1.6.33.11.1.4 | ColumnllcfrcnvSRControl | write-only | mandatory | Permits control of a specific SAP (service access point). Options: clearStats (1): Clear all statistics stored by statistics objects. Configuration Changed: ad… |
| 1.3.6.1.4.1.495.2.1.6.33.11.1.5 | ColumnllcfrcnvSRPriority | read-write | mandatory | Determines the filtering/forwarding action and the forwarding priority for data sent from the STP bridge. Options: discard (1): Do not forward the data. forwar… |
| 1.3.6.1.4.1.495.2.1.6.33.11.1.6 | ColumnllcfrcnvSRSubRef | read-write | mandatory | Specifies a reference number that uniquely identifies this route. This number is used by the FRIM (Frame Relay Interface Module) to identify routes using the s… |
| 1.3.6.1.4.1.495.2.1.6.33.11.1.10 | ColumnllcfrcnvSRRouteStatus | read-only | mandatory | Indicates the status of this route. Options: offLine (1): Indicates that the route is not configured. notConnected (2): Indicates that the remote destination m… |
| 1.3.6.1.4.1.495.2.1.6.33.11.1.11 | ColumnllcfrcnvSRClearStatus | read-only | mandatory | Indicates the status of a failed connection. The value of this object is only valid only between attempts to establish the route connection (llcfrcnvSRRouteSta… |
| 1.3.6.1.4.1.495.2.1.6.33.11.1.12 | ColumnllcfrcnvSROutSuccessfullConnects | read-only | mandatory | Indicates the number of successful connections originated for this route. An outgoing connection is always attempted from LLC-2 Frame Relay Convergence to FRIM. |
| 1.3.6.1.4.1.495.2.1.6.33.11.1.13 | ColumnllcfrcnvSROutUnsuccessfullConnects | read-only | mandatory | Indicates the number of unsuccessful connections originated for this route. An outgoing connection is always attempted from LLC-2 Frame Relay Convergence to FR… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| MacAddress | OCTET STRING (SIZE (6)) | ||
| SubRef | INTEGER (0..255) |