CXMLPPP-MIB
78 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.49.1 | ScalarmlpppNbSmallBufs | read-write | mandatory | Determines the number of small size buffers that you want to create for the MLPPP stack. Range of Values: The maximum value of this object depends on the amoun… |
| 1.3.6.1.4.1.495.2.1.6.49.2 | ScalarmlpppSmallBufSize | read-write | mandatory | WARNING: Do not modify this object without the supervision of Memotec personnel. Determines the size, in bytes, of each small buffer in the MLPPP stack. Range … |
| 1.3.6.1.4.1.495.2.1.6.49.3 | ScalarmlpppNbLargeBufs | read-write | mandatory | Determines the number of large size buffers for the MLPPP stack. Range of Values: The maximum value of this object depends on the amount of RAM available on th… |
| 1.3.6.1.4.1.495.2.1.6.49.4 | ScalarmlpppLargeBufSize | read-write | mandatory | Do not modify this object without the supervision of Memotec personnel. Determines the size, in bytes, of each large size buffer of the MLPPP stack. Range of V… |
| 1.3.6.1.4.1.495.2.1.6.49.40 | ScalarmlpppSoftwareVersion | read-only | mandatory | Identifies the Multilink Protocol software revision number, which is displayed as a string of two numbers, each separated by a period (1.2). The two numbers re… |
| 1.3.6.1.4.1.495.2.1.6.49.41 | ScalarmlpppNbActiveUSap | read-only | mandatory | Indicates the number of MLPPP upper SAPs that have been initialized. Upper SAPs are used to interact with the network layer. Up to ten Multilink PPP links are … |
| 1.3.6.1.4.1.495.2.1.6.49.42 | ScalarmlpppNbActiveLSap | read-only | mandatory | Indicates the number of MLPPP lower SAPs that have been initialized. Each lower SAP has an associated PPP link. Up to ten PPP links are supported in this relea… |
| 1.3.6.1.4.1.495.2.1.6.49.43 | ScalarmlpppNbActiveBundle | read-only | mandatory | Indicates the number of bundles that have been initialized. A bundle is a group of physical links that Multilink PPP uses as one virtual link. The network laye… |
| 1.3.6.1.4.1.495.2.1.6.49.44 | ScalarmlpppNbSmallBufsFree | read-only | mandatory | Displays the number of small buffers that are currently free within the MLPPP stack. Default Value: none |
| 1.3.6.1.4.1.495.2.1.6.49.45 | ScalarmlpppNbLargeBufsFree | read-only | mandatory | Displays the number of large buffers that are currently free within the MLPPP stack. Default Value: none |
| 1.3.6.1.4.1.495.2.1.6.49.49 | ScalarmlpppMibLevel | read-only | mandatory | Used to determine current MIB module release supported by the agent. Object is in decimal. |
| 1.3.6.1.4.1.495.2.1.6.49.50 | TablemlpppLSapTable | not-accessible | mandatory | The SAP table contains configuration information for each MLPPP layer lower SAP (service access point). Lower SAPs exist at the lower interface of the Multilin… |
| 1.3.6.1.4.1.495.2.1.6.49.50.1 | RowmlpppLSapEntry | not-accessible | mandatory | Defines a row in the mlppLSapTable. Each row contains the objects which define a lower service access point. |
| 1.3.6.1.4.1.495.2.1.6.49.50.1.1 | ColumnmlpppLSapNumber | read-only | mandatory | Identifies the lower SAP entry with a unique numerical value. Range of Values: 1 - 100 Default Value: none |
| 1.3.6.1.4.1.495.2.1.6.49.50.1.2 | ColumnmlpppLSapRowStatus | read-write | mandatory | Determines the status of the objects in a table row. Options: invalid (1): Row is deleted from the table, but values are still in effect until the next reset. … |
| 1.3.6.1.4.1.495.2.1.6.49.50.1.3 | ColumnmlpppLSapAlias | read-write | mandatory | Identifies this lower service access point by a textual name. Names must be unique across all service access points at all layers. Range of Values: 0 to16 alph… |
| 1.3.6.1.4.1.495.2.1.6.49.50.1.4 | ColumnmlpppLSapCompanionAlias | read-write | mandatory | Determines the sub-layer SAP that this SAP communicates with. This object contains the textual name of the sub-layer SAP. Range of Values: 0 to16 alphanumeric … |
| 1.3.6.1.4.1.495.2.1.6.49.50.1.12 | ColumnmlpppLSapDialEntry | read-write | mandatory | This object is supported in this release. Determines the index in the dial table which corresponds to a ISDN directory entry.. The access point is the B Channe… |
| 1.3.6.1.4.1.495.2.1.6.49.50.1.14 | ColumnmlpppLSapLcInitialMRU | read-write | mandatory | Determines the Maximum Receive Unit (in octets) proposed by the local port. The local port's proposed MRU will be negotiated with the remote port's proposed MR… |
| 1.3.6.1.4.1.495.2.1.6.49.50.1.15 | ColumnmlpppLSapLcTransmitACCMap | read-write | mandatory | Determines the Asynchronous Control Character Map (ACC) that the local PPP link proposes for use on its transmit side. The local's proposed ACC will be negotia… |
| 1.3.6.1.4.1.495.2.1.6.49.50.1.16 | ColumnmlpppLSapLcMaxConfigure | read-write | mandatory | Determines the maximum number of Configure-Request packets that the port can send without any acknowledgment from the peer. If the maximum number of packets ha… |
| 1.3.6.1.4.1.495.2.1.6.49.50.1.17 | ColumnmlpppLSapLcMaxTerminate | read-write | mandatory | Determines the maximum number of Termination-Request packets that the port can send without any answer from the peer. If the maximum number of packets has been… |
| 1.3.6.1.4.1.495.2.1.6.49.50.1.18 | ColumnmlpppLSapLcMaxFailure | read-write | mandatory | Determines the maximum number of Configure-Not-Acknowledge packets which can be sent without receipt of a Configure-Acknowledge packet. A Configure-Acknowledge… |
| 1.3.6.1.4.1.495.2.1.6.49.50.1.19 | ColumnmlpppLSapLcRestartTimer | read-write | mandatory | Determines the time interval (in seconds) between the sending of a Configure-Request or Terminate-Request packet, and the time before its retransmission if no … |
| 1.3.6.1.4.1.495.2.1.6.49.50.1.20 | ColumnmlpppLSapLcProtFieldComp | read-write | mandatory | Determines whether the local PPP port can receive packets with a compressed PPP Protocol Field. If enabled, the port informs its peer that it can receive packe… |
| 1.3.6.1.4.1.495.2.1.6.49.50.1.21 | ColumnmlpppLSapLcACFieldComp | read-write | mandatory | Determines whether the local PPP port can receive packets with compressed PPP Address and Control Fields. If enabled, the port informs its peer that it can rec… |
| 1.3.6.1.4.1.495.2.1.6.49.50.1.22 | ColumnmlpppLSapLcMagicNumber | read-write | mandatory | Determines whether the Magic Number is enabled or disabled. The Magic Number is a unique random system generated number, present in every Configure-Request pac… |
| 1.3.6.1.4.1.495.2.1.6.49.50.1.23 | ColumnmlpppLSapLinkControl | read-write | mandatory | Enables/disables the connectivity of this link to the bundle Stops or starts the interface Acts also as an operational control. Options: enabled :the link may … |
| 1.3.6.1.4.1.495.2.1.6.49.50.1.30 | ColumnmlpppLSapClearStats | write-only | mandatory | Clears the statistics counter of the PPP link associated to this lower SAP. Options: clearStats :clears statistics Default Value: none |
| 1.3.6.1.4.1.495.2.1.6.49.50.1.40 | ColumnmlpppLSapState | read-only | mandatory | Indicates the current state of this lower SAP (service access point). Options: not-used (1): SAP not in use. unbound (2): SAP not bound to another software lay… |
| 1.3.6.1.4.1.495.2.1.6.49.50.1.41 | ColumnmlpppLSapPhysNetStatus | read-only | mandatory | Indicates the most recent change in link status between MLPPP and the physical layer. Options: pif-attached (1): A physical interface has been attached to this… |
| 1.3.6.1.4.1.495.2.1.6.49.50.1.42 | ColumnmlpppLSapVirtNetStatus | read-only | mandatory | Indicates the most recent change in link status between MLPPP and the network layer. Each lower SAP has an associated PPP link. Options: vif-attached (1): The … |
| 1.3.6.1.4.1.495.2.1.6.49.50.1.43 | ColumnmlpppLSapLsBadAddresses | read-only | mandatory | Identifies the number of packets received at the local port which contain a bad address field. Range of Values: 0 - 4,294,967,295 Default Value: None |
| 1.3.6.1.4.1.495.2.1.6.49.50.1.44 | ColumnmlpppLSapLsBadControls | read-only | mandatory | Identifies the number of packets received at the local port which contain an incorrect control field. Range of Values: 0 - 4,294,967,295 Default Value: None |
| 1.3.6.1.4.1.495.2.1.6.49.50.1.45 | ColumnmlpppLSapLsPacketTooLongs | read-only | mandatory | Identifies the number of packets received at the local port which have been discarded because their length exceeded the Maximum Receive Unit (MRU). Packets whi… |
| 1.3.6.1.4.1.495.2.1.6.49.50.1.46 | ColumnmlpppLSapLsBadFCSs | read-only | mandatory | Identifies the number of packets received at the local port which have been discarded because they had an incorrect Frame Check Sequence (FCS). Range of Values… |
| 1.3.6.1.4.1.495.2.1.6.49.50.1.47 | ColumnmlpppLSapLsLocalMRU | read-only | mandatory | Identifies the current value in octets of the Maximum Receive Unit (MRU) for the local PPP link. This value is the MRU that the remote is using to send packets… |
| 1.3.6.1.4.1.495.2.1.6.49.50.1.48 | ColumnmlpppLSapLsRemoteMRU | read-only | mandatory | Identifies the current value in octets of the Maximum Receive Unit (MRU) for the remote PPP link. This value is the MRU that the local is using to send packets… |
| 1.3.6.1.4.1.495.2.1.6.49.50.1.49 | ColumnmlpppLSapLsLocalToPeerACCMap | read-only | mandatory | Identifies the current value of the Asynchronous Control Character(ACC)Map for the local PPP link. This value is the ACCMap that the local link is using to sen… |
| 1.3.6.1.4.1.495.2.1.6.49.50.1.50 | ColumnmlpppLSapLsPeerToLocalACCMap | read-only | mandatory | Identifies the current value of the Asynchronous Control Character(ACC) Map for the remote PPP link. This value is the ACCMap that the remote peer is using to … |
| 1.3.6.1.4.1.495.2.1.6.49.50.1.51 | ColumnmlpppLSapLsLocalToRemoteProtComp | read-only | mandatory | Indicates whether the local PPP link is using Protocol Compression when transmitting packets to the remote. This value is meaningful only when the link has rea… |
| 1.3.6.1.4.1.495.2.1.6.49.50.1.52 | ColumnmlpppLSapLsRemoteToLocalProtComp | read-only | mandatory | Indicates whether the remote PPP link is using Protocol Compression when transmitting packets to the local. This value is meaningful only when the link has rea… |
| 1.3.6.1.4.1.495.2.1.6.49.50.1.53 | ColumnmlpppLSapLsLocalToRemoteACComp | read-only | mandatory | Indicates whether the local end of the PPP link is using Address and Control Compression when it transmits packets to the remote. The value is meaningful only … |
| 1.3.6.1.4.1.495.2.1.6.49.50.1.54 | ColumnmlpppLSapLsRemoteToLocalACComp | read-only | mandatory | Indicates whether or not the remote end of the PPP link is using Address and Control Compression when it transmits packets to the local. The value is meaningfu… |
| 1.3.6.1.4.1.495.2.1.6.49.50.1.70 | ColumnmlpppLSapNbBytesSent | read-only | mandatory | Indicates the number of bytes sent to the physical layer through this lower SAP since system startup or since last statistics reset. Range of Values: 0 - 4,294… |
| 1.3.6.1.4.1.495.2.1.6.49.50.1.71 | ColumnmlpppLSapNbBytesReceived | read-only | mandatory | Indicates the number of bytes received from the physical layer through this lower SAP since system startup, or since last statistics reset. Range of Values: 0 … |
| 1.3.6.1.4.1.495.2.1.6.49.50.1.100 | ColumnmlpppLSapLinkUSapNumber | read-write | mandatory | Determines the MLPPP upper SAP number that is associated with this MLPPP lower SAP. In this release, bundling is not supported, and the MLPPP upper SAP number … |
| 1.3.6.1.4.1.495.2.1.6.49.51 | TablemlpppUSapTable | not-accessible | mandatory | The SAP table contains configuration information for each MLPPP layer upper SAP (service access point). Upper SAPs exist at the upper interface of the Multilin… |
| 1.3.6.1.4.1.495.2.1.6.49.51.1 | RowmlpppUSapEntry | not-accessible | mandatory | Defines a row in the mlppUSapTable. Each row contains the objects which define an upper service access point. |
| 1.3.6.1.4.1.495.2.1.6.49.51.1.1 | ColumnmlpppUSapNumber | read-only | mandatory | Identifies the upper SAP entry with a unique numerical value. Range of Values: 1 - 100 Default Value: none |
| 1.3.6.1.4.1.495.2.1.6.49.51.1.2 | ColumnmlpppUSapRowStatus | read-write | mandatory | Determines the status of the objects in a table row. Options: invalid (1): Row is deleted from the table, but values are still in effect until the next reset. … |
| 1.3.6.1.4.1.495.2.1.6.49.51.1.3 | ColumnmlpppUSapAlias | read-write | mandatory | Identifies this upper service access point by a textual name. Names must be unique across all service access points at all layers. Range of Values: 0 - 16 alph… |
| 1.3.6.1.4.1.495.2.1.6.49.51.1.20 | ColumnmlpppUSapLcInitialMRRU | read-write | mandatory | This object is not implemented in this release. Determines the Maximum Receive Reconstructed Unit (MRRU) in octets proposed by the local port. The local port's… |
| 1.3.6.1.4.1.495.2.1.6.49.51.1.21 | ColumnmlpppUSapLcSeqFieldComp | read-write | mandatory | This object is implemented in this release. Determines whether the Sequence Number Field is compressed or not. If the the Sequence Number Field is compressed, … |
| 1.3.6.1.4.1.495.2.1.6.49.51.1.22 | ColumnmlpppUSapLcUseBACP | read-write | mandatory | If enabled, BACP is used for adding/removing links Options: enabled (1) disabled (2) Default Value: disabled (2) Configuration Changed: administrative |
| 1.3.6.1.4.1.495.2.1.6.49.51.1.23 | ColumnmlpppUSapTransmitWindow | read-write | mandatory | Determines the size of the transmit window for this SAP, i.e. the maximum number of buffers queued by MLPPP before it starts to discard frames Range of Values:… |
| 1.3.6.1.4.1.495.2.1.6.49.51.1.24 | ColumnmlpppUSapGenerator | read-write | mandatory | Determines whether this SAP generates for diagnostic purposes the number of frames set by object mlpppUSapGeneratorNumberOfFrames of a size set in 'mlpppUSapGe… |
| 1.3.6.1.4.1.495.2.1.6.49.51.1.25 | ColumnmlpppUSapGeneratorLinkUSap | read-write | mandatory | Identifies the upper SAP entry to which all received generator frames are sent If 0, the received frames are discarded. Range of Values: 0 - 100 Default Value:… |
| 1.3.6.1.4.1.495.2.1.6.49.51.1.26 | ColumnmlpppUSapGeneratorFrameSize | read-write | mandatory | Determines the size of each frame generated for this SAP. Range of Values: 32 - 4096 Default Value: 32 Configuration Changed: operative |
| 1.3.6.1.4.1.495.2.1.6.49.51.1.27 | ColumnmlpppUSapGeneratorNumberOfFrames | read-write | mandatory | Determines the number of frames to be generated for this SAP. Range of Values: 1 - 200 (200=continuous) Default Value: 1 Configuration Changed: operative |
| 1.3.6.1.4.1.495.2.1.6.49.51.1.28 | ColumnmlpppUSapGeneratorInterFrameDelay | read-write | mandatory | Determines the time in milliseconds that must pass between frames generated for this SAP. Range of Values: 50 - 60,000 Default Value: 50 Configuration Changed:… |
| 1.3.6.1.4.1.495.2.1.6.49.51.1.29 | ColumnmlpppUSapGeneratorFramePriority | read-write | mandatory | Determines the priority of SAP generator frames for diagnostic purposes Options: lowpri (1): low priority. medpri (2): medium priority highpri (3): high priori… |
| 1.3.6.1.4.1.495.2.1.6.49.51.1.30 | ColumnmlpppUSapClearStats | write-only | mandatory | Clears the statistics counter of the MLPPP link associated with this upper SAP. Options: clearStats : clears statistics Default Value: none |
| 1.3.6.1.4.1.495.2.1.6.49.51.1.31 | ColumnmlpppUSapMlpppMode | read-write | mandatory | Indicates the current use of this upper SAP. If MLPPP is to be used for inverse multiplexing, it must be enabled. If disabled, dumb inverse multiplexing and lo… |
| 1.3.6.1.4.1.495.2.1.6.49.51.1.40 | ColumnmlpppUSapState | read-only | mandatory | Indicates the current state of this upper SAP. Options: not-used (1): SAP not in use unbound (2): SAP not bound to another software layer bound (3): SAP bound … |
| 1.3.6.1.4.1.495.2.1.6.49.51.1.41 | ColumnmlpppUSapNbPPPLink | read-only | mandatory | Indicates the number of MLPPP lower SAPs that are associated to this upper MLPPP SAP. This value is equivalent to the number of PPP links that are bundled into… |
| 1.3.6.1.4.1.495.2.1.6.49.51.1.42 | ColumnmlpppUSapLsLocalMRRU | read-only | mandatory | This object is implemented in this release. Identifies the current value in octets of the Maximum Receive Reconstructed Unit (MRRU) for the local bundle. This … |
| 1.3.6.1.4.1.495.2.1.6.49.51.1.43 | ColumnmlpppUSapLsRemoteMRRU | read-only | mandatory | This object is implemented in this release. Identifies the current value in octets of the Maximum Receive Reconstructed Unit (MRRU) for the remote bundle. This… |
| 1.3.6.1.4.1.495.2.1.6.49.51.1.44 | ColumnmlpppUSapLsLocalToRemoteSeqFieldComp | read-only | mandatory | This object is implemented in this release. Indicates whether the local end of the MLPPP link is using short sequence field (12 bits) when it transmits packets… |
| 1.3.6.1.4.1.495.2.1.6.49.51.1.45 | ColumnmlpppUSapLsRemoteToLocalSeqFieldComp | read-only | mandatory | This object is implemented in this release. Indicates whether the remote end of the MLPPP link is using short sequence field (12 bits) when it transmits packet… |
| 1.3.6.1.4.1.495.2.1.6.49.51.1.46 | ColumnmlpppUSapNbPPPLinkUP | read-only | mandatory | The number of PPP links in a bundle which succesfully finished the LCP configuration phase. The PPP layer is UP on that many links of the bundle. |
| 1.3.6.1.4.1.495.2.1.6.49.51.1.47 | ColumnmlpppUsapMlpNcpState | read-only | mandatory | The state of the NCP associated with the MLPPP protocol. The bundle can talk MLPPP only after the MRRU option has been succesfully negociated. Options: ncp-up … |
| 1.3.6.1.4.1.495.2.1.6.49.51.1.48 | ColumnmlpppUsapGenNcpState | read-only | mandatory | The state of the NCP associated with the MLPPP frame generator PID. The generator can be used only after two bundles have negociated the use of a specific PID … |
| 1.3.6.1.4.1.495.2.1.6.49.51.1.49 | ColumnmlpppUsapBapNcpState | read-only | mandatory | The state of the NCP associated with the BAP protocol. The BAP protocol can be used only after two bundles have negociated it's use for adding or removing link… |
| 1.3.6.1.4.1.495.2.1.6.49.51.1.50 | ColumnmlpppUsapFrNcpState | read-only | mandatory | The state of the NCP associated with the FR protocol. The FR protocol can be used over MLPPP only after two bundles have negociated the FRNCP configuration. Th… |
| 1.3.6.1.4.1.495.2.1.6.49.51.1.51 | ColumnmlpppUsapIpNcpState | read-only | mandatory | The state of the NCP associated with the IP protocol. The IP protocol can be used over MLPPP only after two bundles have negociated the IPNCP configuration. Op… |
| 1.3.6.1.4.1.495.2.1.6.49.51.1.70 | ColumnmlpppUSapNbBytesSent | read-only | mandatory | Indicates the number of bytes sent to the network layer through this upper SAP since system startup, or since last statistics reset. Range of Values: 0 - 4,294… |
| 1.3.6.1.4.1.495.2.1.6.49.51.1.71 | ColumnmlpppUSapNbBytesReceived | read-only | mandatory | Indicates the number of bytes received from the network layer through this upper SAP since system startup, or since last statistics reset. Range of Values: 0 -… |