CXQLLC-MIB
46 objects
No module-level DESCRIPTION found.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.38.1 | TableqllcSapTable | not-accessible | mandatory | A table containing configuration information for each QLLC service access point. |
| 1.3.6.1.4.1.495.2.1.6.38.1.1 | RowqllcSapEntry | not-accessible | mandatory | Defines a row in the qllcSapTable. Each row contains the objects which are used to define a service access point. |
| 1.3.6.1.4.1.495.2.1.6.38.1.1.1 | ColumnqllcSapNumber | read-only | mandatory | Identifies a SAP (service access point) in the qllcSapTable. |
| 1.3.6.1.4.1.495.2.1.6.38.1.1.2 | ColumnqllcSapRowStatus | read-write | mandatory | Determines the status of the objects in a table row. Options: invalid (1): Row is flagged, after next reset the values will be disabled and the row will be del… |
| 1.3.6.1.4.1.495.2.1.6.38.1.1.3 | ColumnqllcSapType | read-write | mandatory | Specifies this SAP (service access point) as either 'upper' or 'lower'. Options: lower (1): This is a lower SAP which communicates with the X.25 layer. upper (… |
| 1.3.6.1.4.1.495.2.1.6.38.1.1.4 | ColumnqllcSapAlias | read-write | mandatory | Identifies this service access point by a textual name. Names must be unique across all service access points at all layers. Range of Values: 1 - 16 alphanumer… |
| 1.3.6.1.4.1.495.2.1.6.38.1.1.5 | ColumnqllcSapCompanionAlias | read-write | mandatory | Identifies the X.25 SAP that this SAP communicates with. Range of Values: 1 - 16 alphanumeric characters (first character must be a letter) Default Value: none… |
| 1.3.6.1.4.1.495.2.1.6.38.1.1.6 | ColumnqllcSapSnalcRef | read-write | mandatory | This object applies only to lower SAPs (service access points). Determines the upper SAP (service access point) that is associated with this SAP. Range of Valu… |
| 1.3.6.1.4.1.495.2.1.6.38.1.1.20 | ColumnqllcSapOperationalMode | read-only | mandatory | Identifies the operational state of this SAP (service access point). Options: offLine (1): Indicates that this SAP is not operational. onLine (2): Indicates th… |
| 1.3.6.1.4.1.495.2.1.6.38.2 | TableqllcDteTable | not-accessible | mandatory | The DTE table contains the parameter settings that are used to create an X.25 Call Request packet for calls established by a particular lower service access po… |
| 1.3.6.1.4.1.495.2.1.6.38.2.1 | RowqllcDteEntry | not-accessible | mandatory | Defines a row in the qllcDteTable. Each row contains the objects which are used to define a the parameters for an X.25 Call Request packet. |
| 1.3.6.1.4.1.495.2.1.6.38.2.1.1 | ColumnqllcDteSap | read-only | mandatory | Identifies the SAP (service access point) associated with this entry. Configuration Changed: administrative |
| 1.3.6.1.4.1.495.2.1.6.38.2.1.2 | ColumnqllcDteIndex | read-only | mandatory | Identifies the control unit address associated with this DTE entry. Configuration Changed: administrative |
| 1.3.6.1.4.1.495.2.1.6.38.2.1.3 | ColumnqllcDteRowStatus | read-write | mandatory | Determines the status of the objects in a table row. Options: invalid (1): Row is flagged, after next reset the values will be disabled and the row will be del… |
| 1.3.6.1.4.1.495.2.1.6.38.2.1.4 | ColumnqllcDteType | read-write | mandatory | Determines the type of interface (HIU or TIU) associated with this DTE. Options: terminalInterfaceUnit (1): The SAP type is a TIU, which means it is connected … |
| 1.3.6.1.4.1.495.2.1.6.38.2.1.5 | ColumnqllcDteCalledAddress | read-write | mandatory | Determines the DTE to call to establish a QLLC connection. Range of Values: DTE address enclosed in quotes (up to 15 characters in length) Default Value: none … |
| 1.3.6.1.4.1.495.2.1.6.38.2.1.6 | ColumnqllcDteCallingAddress | read-write | mandatory | Determines the DTE address of the caller. Range of Values: DTE address enclosed in quotes (up to 15 characters in length) Default Value: none Configuration Cha… |
| 1.3.6.1.4.1.495.2.1.6.38.2.1.7 | ColumnqllcDteDBitCall | read-write | mandatory | Determines if segmentation is supported and is to be performed by the QLLC layer for the specific DTE entry. Options: no (1): QLLC does not support segmentatio… |
| 1.3.6.1.4.1.495.2.1.6.38.2.1.8 | ColumnqllcDteWindow | read-write | mandatory | Determines the transmit and receive window sizes for this DTE. This window size is used when establishing calls from this DTE, or when receiving calls at this … |
| 1.3.6.1.4.1.495.2.1.6.38.2.1.9 | ColumnqllcDtePacketSize | read-write | mandatory | Determines the transmit and receive packet size for this DTE when flow control negotiation (x25SapSbscrFlowCntrlParamNegotiation) is not subscribed to, or when… |
| 1.3.6.1.4.1.495.2.1.6.38.2.1.10 | ColumnqllcDteThroughput | read-write | mandatory | Determines the transmit and receive throughput class for this DTE when flow control negotiation (x25SapSbscrThruputClassNegotiation) is not subscribed to, or w… |
| 1.3.6.1.4.1.495.2.1.6.38.2.1.11 | ColumnqllcDteUserData | read-write | mandatory | Determines the data included in the call user data field of each outgoing call initiated by this DTE. Call user data can only be included when calling non-Memo… |
| 1.3.6.1.4.1.495.2.1.6.38.2.1.12 | ColumnqllcDteFacility | read-write | mandatory | Determines the facility codes and associated parameters for this DTE. Default Value: 0 Range of Values: 0 - 20 hexadecimal characters Configuration Changed: ad… |
| 1.3.6.1.4.1.495.2.1.6.38.2.1.13 | ColumnqllcDteMemotec | read-write | mandatory | Determines the type of product that the called DTE address is associated with, which in turn determines how the call user data (CUD) field is constructed for a… |
| 1.3.6.1.4.1.495.2.1.6.38.2.1.14 | ColumnqllcDtePvc | read-write | mandatory | Determines if this DTE makes its calls on a PVC (permanent virtual circuit). Options: no (1): This DTE does not make its calls on a PVC (all calls are switched… |
| 1.3.6.1.4.1.495.2.1.6.38.2.1.15 | ColumnqllcDteConnectMethod | read-write | mandatory | Determines if this DTE accepts calls by validating the user-data field, or by matching the calling address with its corresponding called address. Note: This ob… |
| 1.3.6.1.4.1.495.2.1.6.38.2.1.20 | ColumnqllcDteControl | write-only | mandatory | Clears all statistics for this service access point. Options: clearStats (1): Clear statistics. Default Value: none Configuration Changed: administrative and o… |
| 1.3.6.1.4.1.495.2.1.6.38.2.1.30 | ColumnqllcDteStatus | read-only | mandatory | Indicates the connection status of this DTE. Options: connected (1): This DTE is connected. pendingConnect (2): This DTE has issued a call and is waiting for i… |
| 1.3.6.1.4.1.495.2.1.6.38.2.1.31 | ColumnqllcDteOperationalMode | read-only | mandatory | Indicates the operational state of this DTE. Options: offLine (1): Indicates that this DTE is not operational. onLine (2): Indicates that this DTE is operation… |
| 1.3.6.1.4.1.495.2.1.6.38.2.1.32 | ColumnqllcDteState | read-only | mandatory | Indicates the state of this DTE with regards to SNA traffic. Options: opened (1): Indicates that this DTE is in data transfer mode (a QSM was sent and a QUA wa… |
| 1.3.6.1.4.1.495.2.1.6.38.2.1.33 | ColumnqllcDteConnectionType | read-only | mandatory | Identifies the type of X.25 connection that the DTE is supporting. Options: none (1): No X.25 connection exists yet. svc (2): The QLLC DTE is transmitting SNA … |
| 1.3.6.1.4.1.495.2.1.6.38.2.1.40 | ColumnqllcDteCalls | read-only | mandatory | Indicates the number of incoming calls received by this DTE. |
| 1.3.6.1.4.1.495.2.1.6.38.2.1.41 | ColumnqllcDteClears | read-only | mandatory | Indicates the number of calls cleared by this DTE. |
| 1.3.6.1.4.1.495.2.1.6.38.2.1.42 | ColumnqllcDteTxPackets | read-only | mandatory | Indicates the number of data packets sent by this DTE. |
| 1.3.6.1.4.1.495.2.1.6.38.2.1.43 | ColumnqllcDteRxPackets | read-only | mandatory | Indicates the number of data packets received by this DTE. |
| 1.3.6.1.4.1.495.2.1.6.38.2.1.44 | ColumnqllcDteQdc | read-only | mandatory | Indicates the number of SNA disconnects sent and received by this DTE. |
| 1.3.6.1.4.1.495.2.1.6.38.2.1.45 | ColumnqllcDteQxid | read-only | mandatory | Indicates the number of SNA XIDs sent and received by this DTE. |
| 1.3.6.1.4.1.495.2.1.6.38.2.1.46 | ColumnqllcDteQua | read-only | mandatory | Indicates the number of unnumbered acknowledgments sent and received by this DTE. |
| 1.3.6.1.4.1.495.2.1.6.38.2.1.47 | ColumnqllcDteQsm | read-only | mandatory | Indicates the number of SNRMs sent and received by this DTE. |
| 1.3.6.1.4.1.495.2.1.6.38.2.1.48 | ColumnqllcDteX25Reset | read-only | mandatory | Indicates the number of X.25 resets sent and received by this DTE. |
| 1.3.6.1.4.1.495.2.1.6.38.2.1.49 | ColumnqllcDteSnalcRnr | read-only | mandatory | Indicates the number of SNA link conversion layer flow control RNRs sent and received by this DTE. |
| 1.3.6.1.4.1.495.2.1.6.38.2.1.50 | ColumnqllcDteSnalcRr | read-only | mandatory | Indicates the number of SNA link conversion layer flow control RRs sent and received by this DTE. |
| 1.3.6.1.4.1.495.2.1.6.38.2.1.51 | ColumnqllcDteX25Rnr | read-only | mandatory | Indicates the number of X.25 flow control RNRs sent and received by this DTE. |
| 1.3.6.1.4.1.495.2.1.6.38.2.1.52 | ColumnqllcDteX25Rr | read-only | mandatory | Indicates the number of X.25 flow control RRs sent and received by this DTE. |
| 1.3.6.1.4.1.495.2.1.6.38.3 | ScalarqllcMibLevel | read-only | mandatory | Used to determine current MIB module release supported by the agent. Object is in decimal. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| PacketSize | INTEGER { bytes16 (4), bytes32 (5), bytes64 (6), bytes128 (7), bytes256 (8), bytes512 (9), bytes1024 (10), bytes2048 (11), bytes4096 (12) } |