CXST-MIB
23 objects
No module-level DESCRIPTION found.
Imported Objects
| CXProduct-SMI | cxST |
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | Counter |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.60.10 | TablestTable | not-accessible | mandatory | A table containing configuration parameters, controls, status and statistics for the S/T Interface Transceiver Driver. |
| 1.3.6.1.4.1.495.2.1.6.60.10.1 | RowstEntry | not-accessible | mandatory | The entry index in the ISDN S/T Interface Transceiver Driver table. |
| 1.3.6.1.4.1.495.2.1.6.60.10.1.1 | ColumnstSlotNumberIndex | read-only | mandatory | Indicates the physical slot number of the I/O card in the CX900/CX900 PRO. Range of Values: 1-6 for CX900, 1-8 for CX900 PRO Default Value: none |
| 1.3.6.1.4.1.495.2.1.6.60.10.1.2 | ColumnstRowStatus | read-write | mandatory | Determines whether this entry is to be removed from service (i.e. invalidated) within the ST Driver. Options: invalid (1): row is flagged; after next reset val… |
| 1.3.6.1.4.1.495.2.1.6.60.10.1.10 | ColumnstPS1Detection | read-write | mandatory | Indicates whether or not the driver has to wait for the detection of the Power Source 1 before generating an activation request at system power-up. Options: di… |
| 1.3.6.1.4.1.495.2.1.6.60.10.1.11 | ColumnstTimer1 | read-write | mandatory | Indicates the maximum duration (in seconds) allocated for ISDN link synchronization at the NT interface as specified in the I.430 standard. Default Value: 15 |
| 1.3.6.1.4.1.495.2.1.6.60.10.1.12 | ColumnstTimer3 | read-write | mandatory | Indicates the maximum duration (in seconds) allocated for ISDN link synchronization at the TE interface as specified in the I.430 standard. Default Value: 10 |
| 1.3.6.1.4.1.495.2.1.6.60.10.1.13 | ColumnstTest | read-write | mandatory | Indicates if the driver needs to configure the S/T Interface in a test mode. Options: disabled (1): Test mode is disabled internal2B1D (2): The B1, B2 and D ch… |
| 1.3.6.1.4.1.495.2.1.6.60.10.1.20 | ColumnstPortStatus | read-only | mandatory | Indicates the status of the port on this I/O card. Options: portDown (1): port is down portUp (2): port is up Default Value: none |
| 1.3.6.1.4.1.495.2.1.6.60.10.1.21 | ColumnstRxInfoState | read-only | mandatory | Indicates the signal that is received across the S/T reference point according to I.430 standard, table 4. Options: info0: INFO0 signal received from the TE or… |
| 1.3.6.1.4.1.495.2.1.6.60.10.1.22 | ColumnstTxInfoState | read-only | mandatory | Indicates the signal that is transmitted across the S/T reference point according to I.430 standard, table 4. Options: info0: INFO0 signal transmitted to the T… |
| 1.3.6.1.4.1.495.2.1.6.60.10.1.23 | ColumnstErrorIndicator | read-only | mandatory | Indicates if an error condition has been detected by the activation state machine. Error conditions: - lost of framing element; - invalid info received. Option… |
| 1.3.6.1.4.1.495.2.1.6.60.10.1.24 | ColumnstFrameSync | read-only | mandatory | Indicates if the frame synchronization is achieved Options: noSync (1): frame synchronization is not achieved Sync (2): frame synchronization is achieved Defau… |
| 1.3.6.1.4.1.495.2.1.6.60.10.1.25 | ColumnstPortMode | read-only | mandatory | Indicates in which mode the ST port is functioning. Options: te (1): Terminal Endpoint, port is in user mode nt (2): Network Termination, port is in network mo… |
| 1.3.6.1.4.1.495.2.1.6.60.10.1.40 | ColumnstActivation | read-only | mandatory | Indicates the number of activation requests received by this I/O card. Range of Values: 0-4294967295 Default Value: none |
| 1.3.6.1.4.1.495.2.1.6.60.10.1.41 | ColumnstDeactivation | read-only | mandatory | Indicates the number of deactivation requests received by this I/O card. Range of Values: 0-4294967295 Default Value: none |
| 1.3.6.1.4.1.495.2.1.6.60.10.1.42 | ColumnstTransition | read-only | mandatory | Indicates the number of down-to-up or up-to-down transitions that have occurred on this I/O card. Range of Values: 0-4294967295 Default Value: none |
| 1.3.6.1.4.1.495.2.1.6.60.10.1.43 | ColumnstNbErrors | read-only | mandatory | Indicates the number of times the transceiver has indicated that an error condition has been detected by the activation state machine as outlined in CCITT I.43… |
| 1.3.6.1.4.1.495.2.1.6.60.10.1.44 | ColumnstFrameSyncLost | read-only | mandatory | Indicates the number of times the transceiver has lost it's frame synchronization. Range of Values: 0-4294967295 Default Value: none |
| 1.3.6.1.4.1.495.2.1.6.60.10.1.45 | ColumnstMissingAMIViolation | read-only | mandatory | Indicates the number of frames not containing the right number of AMI violations. Range of Values: 0-255 Default Value: none |
| 1.3.6.1.4.1.495.2.1.6.60.10.1.46 | ColumnstUnbalancedFrame | read-only | mandatory | Indicates the number of unbalanced frames. Range of Values: 0-255 Default Value: none |
| 1.3.6.1.4.1.495.2.1.6.60.10.1.60 | ColumnstClearStat | write-only | mandatory | Clears all S/T driver statistic counters for this I/O card. Options: clearStats : clears statistics Default value: none |
| 1.3.6.1.4.1.495.2.1.6.60.10.1.61 | ColumnstPortCtrl | write-only | mandatory | Either brings up/down the port on this I/O card or reset it. Options: portDown (1): bring port down portUp (2): bring port up portReset (3): port is reset and … |