CXSnaLinkConversionModule-MIB
27 objects
No module-level DESCRIPTION found.
Imported Objects
| CXProduct-SMI | Alias cxSnalc SapIndex |
| RFC-1212 | OBJECT-TYPE |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.495.2.1.6.35.9 | ScalarsnalcMibLevel | read-only | mandatory | Used to determine current MIB module release supported by the agent. Object is in decimal. |
| 1.3.6.1.4.1.495.2.1.6.35.10 | TablesnalcSapTable | not-accessible | mandatory | This table contains configuration information for each SNA Link Conversion layer SAP (service access point). |
| 1.3.6.1.4.1.495.2.1.6.35.10.1 | RowsnalcSapEntry | not-accessible | mandatory | Defines a row in the snalcSapTable. Each row contains the objects which define a service access point. |
| 1.3.6.1.4.1.495.2.1.6.35.10.1.1 | ColumnsnalcSapNumber | read-only | mandatory | Identifies this SAP (service access point) with a numerical value which must be unique for each SNA Link Conversion SAP. |
| 1.3.6.1.4.1.495.2.1.6.35.10.1.2 | ColumnsnalcSapRowStatus | read-write | mandatory | Determines the status of the objects in a table row. Options: invalid (1): Row is flagged, after next reset the values will be disabled and the row is deleted … |
| 1.3.6.1.4.1.495.2.1.6.35.10.1.3 | ColumnsnalcSapAlias | read-write | mandatory | Identifies this service access point by a textual name. Names must be unique across all service access points at all layers. Default Value: none Range of Value… |
| 1.3.6.1.4.1.495.2.1.6.35.10.1.4 | ColumnsnalcSapCompanionAlias | read-write | mandatory | Determines the sub-layer SAP (service access point) this SAP communicates with. This object contains the textual name of the sub-layer SAP. SDLC, LLC-2 (LLCIM)… |
| 1.3.6.1.4.1.495.2.1.6.35.10.1.6 | ColumnsnalcSapState | read-only | mandatory | Indicates the state of this SAP (service access point). Options: offLine (1): Indicates that the SAP is not configured. unbound (2): Indicates that this SAP is… |
| 1.3.6.1.4.1.495.2.1.6.35.11 | TablesnalcCrossConnectTable | not-accessible | mandatory | This table contains configuration information for each SNA Link Conversion Module cross-connection. A cross-connection associates two link connections so that … |
| 1.3.6.1.4.1.495.2.1.6.35.11.1 | RowsnalcCrossConnectEntry | not-accessible | mandatory | The parameters for a particular SNA Link Conversion Module cross- connection. Up to 64 cross-connect rows may exist in the table. |
| 1.3.6.1.4.1.495.2.1.6.35.11.1.1 | ColumnsnalcCrossConnectSrcSapNumber | read-only | mandatory | Identifies the source link for a cross-connection. When cross- connecting hierarchical SNA devices, the source link is the side which is attached to the SNA co… |
| 1.3.6.1.4.1.495.2.1.6.35.11.1.2 | ColumnsnalcCrossConnectSrcLinkAddrIndex | read-only | mandatory | Identifies the link level connection for the source-side of a cross- connection. Many link level connections can share the same source SAP (service access poin… |
| 1.3.6.1.4.1.495.2.1.6.35.11.1.3 | ColumnsnalcCrossConnectDstSapNumber | read-only | mandatory | Identifies the destination link for a cross-connection. When cross- connecting hierarchical SNA devices, the destination link is the side which is attached to … |
| 1.3.6.1.4.1.495.2.1.6.35.11.1.4 | ColumnsnalcCrossConnectDstLinkAddrIndex | read-only | mandatory | Identifies the link level connection for the destination-side of a cross- connection. Many link level connections can share the same destination SAP (service a… |
| 1.3.6.1.4.1.495.2.1.6.35.11.1.5 | ColumnsnalcCrossConnectRowStatus | read-write | mandatory | Determines the status of the objects in a table row. Options: invalid (1): Row is flagged, after next reset the values will be disabled and the row will be del… |
| 1.3.6.1.4.1.495.2.1.6.35.11.1.6 | ColumnsnalcCrossConnectPuId | read-write | mandatory | Determines the SNA PU identifier sent to the host in an XID. The PU identifier is composed of the block ID and node ID. This object applies only when the desti… |
| 1.3.6.1.4.1.495.2.1.6.35.11.1.7 | ColumnsnalcCrossConnectMaxRetries | read-write | mandatory | Determines the maximum number of attempts to establish this cross- connection before it is abandoned. If set to 255, SNA Link Conversion retries forever until … |
| 1.3.6.1.4.1.495.2.1.6.35.11.1.8 | ColumnsnalcCrossConnectConnectInterval | read-write | mandatory | Determines the delay between attempts to establish this cross-connection when not in slow connect mode. Range of Values: 1 - 65535 seconds Default Value: 10 se… |
| 1.3.6.1.4.1.495.2.1.6.35.11.1.9 | ColumnsnalcCrossConnectSlowConnectThreshold | read-write | mandatory | Determines the number of attempts that are made to establish a cross- connection using the snalcCrossConnectConnectInterval . When the threshold defined by thi… |
| 1.3.6.1.4.1.495.2.1.6.35.11.1.10 | ColumnsnalcCrossConnectSlowConnectInterval | read-write | mandatory | Determines the delay between attempts to establish a cross-connection when in slow connect mode. Range of Values: 1 - 65535 Default Value: 60 Related Objects: … |
| 1.3.6.1.4.1.495.2.1.6.35.11.1.11 | ColumnsnalcCrossConnectWaitContactTimer | read-write | mandatory | Determines the amount of time to wait for a Set Mode or SNA XID frame from the remote station after the link has been established. Range of Values: 1 - 65535 s… |
| 1.3.6.1.4.1.495.2.1.6.35.11.1.12 | ColumnsnalcCrossConnectConnectMethod | read-write | mandatory | Determines how the cross-connected links are established. This object may be set only if the value of the associated snalcCrossConnectAdminStatus object is 'do… |
| 1.3.6.1.4.1.495.2.1.6.35.11.1.13 | ColumnsnalcCrossConnectAdminStatus | read-write | mandatory | Control which allows the cross- connections to be established or disconnected. The order in which links are established is determined by object snalcCrossConne… |
| 1.3.6.1.4.1.495.2.1.6.35.11.1.14 | ColumnsnalcCrossConnectSrcOperStatus | read-only | mandatory | Indicates the state of the source link. Options: offLine (1): Indicates that this cross-connection is not defined at the layer or too many cross-connections ha… |
| 1.3.6.1.4.1.495.2.1.6.35.11.1.15 | ColumnsnalcCrossConnectDstOperStatus | read-only | mandatory | Indicates the state of the destination link. Options: offLine (1): Indicates that this cross-connection is not defined at the layer or too many cross-connectio… |
| 1.3.6.1.4.1.495.2.1.6.35.11.1.16 | ColumnsnalcCrossConnectXidTransparent | read-write | mandatory | Determines if any changes are to be made to the XID. If transparent mode is specified, XID information fields are not modified, and the XID's are passed transp… |
| 1.3.6.1.4.1.495.2.1.6.35.11.1.17 | ColumnsnalcCrossConnectDataLinkType | read-write | mandatory | Configurates the type of connection. Two types are supported : SNA connections, using the SDLC data link layer. BSC connections, using the BSC data link layer.… |